main
Ray
Initial commit: component/bl6523gx
f3d299c
BL6523GX
BL Shanghai Belling · Energy Metering · SOP-16
BL6523GX from BL Shanghai Belling, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IAN | input | Current channel A analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 2 | IBP | input | Current channel B analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 3 | IBN | input | Current channel B analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 4 | VP | input | Voltage channel analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, signal maximum magnitude ±1.5V. |
| 5 | VN | input | Voltage channel analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, signal maximum magnitude ±1.5V. |
| 6 | VREF | passive | Reference voltage pin with on-chip nominal 2.5V and 5ppm/°C temperature coefficient, accepts external 2.5V reference source, requires 1µF ceramic capacitor to ground. |
| 7 | GND | power_in | Analog circuit reference ground, should connect to analog ground plane or most stable system ground point used by all analog circuits, single connection point to digital ground plane. |
| 8 | /RST | input | Chip reset signal input active low, minimum 32µs low pulse followed by 300µs high required to reset. |
| 9 | CF | output | Active power calibration pulse output providing active power measurement information for meter calibration, 90ms fixed pulse width for low power measurement, half-period width when output period less than 180ms, frequency adjustable via WA_CFNUM register. |
| 10 | CLKOUT | output | Clock output pin working with CLKIN to provide 3.58MHz clock to chip, can drive CMOS load, can use ceramic load capacitors in crystal circuit. |
| 11 | CLKIN | input | Main clock input for analog and digital processing circuits, accepts external clock or parallel crystal connection at 3.58MHz frequency with 22-33pF ceramic load capacitors. |
| 12 | GND | power_in | Analog circuit reference ground, should connect to analog ground plane or most stable system ground point used by all analog circuits. |
| 13 | TX | output | Serial interface UART data output pin at 4800bps fixed baud rate, no parity, 1 stop bit. |
| 14 | RX | input | Serial interface UART data input pin at 4800bps fixed baud rate, no parity, 1 stop bit, multiplexed with /RST reset function. |
| 15 | VDD | power_in | Positive power supply +5V nominal providing analog section power, normal operation requires +4.5V to +5.5V. |
| 16 | IAP | input | Current channel A analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | SOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
BL6523GX - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
bl6523gx-etched.step/bl6523gx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl6523gx.step/bl6523gx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL Shanghai Belling datasheet (33 pp, sha256
edf0f9cf4bc2f5fb, retrieved 2026-09-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# BL6523GX
**BL Shanghai Belling** · Energy Metering · SOP-16
BL6523GX from BL Shanghai Belling, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IAN | input | Current channel A analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 2 | IBP | input | Current channel B analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 3 | IBN | input | Current channel B analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
| 4 | VP | input | Voltage channel analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, signal maximum magnitude ±1.5V. |
| 5 | VN | input | Voltage channel analog input (negative), maximum differential voltage ±660mV with adjustable gain via GAIN register, signal maximum magnitude ±1.5V. |
| 6 | VREF | passive | Reference voltage pin with on-chip nominal 2.5V and 5ppm/°C temperature coefficient, accepts external 2.5V reference source, requires 1µF ceramic capacitor to ground. |
| 7 | GND | power_in | Analog circuit reference ground, should connect to analog ground plane or most stable system ground point used by all analog circuits, single connection point to digital ground plane. |
| 8 | /RST | input | Chip reset signal input active low, minimum 32µs low pulse followed by 300µs high required to reset. |
| 9 | CF | output | Active power calibration pulse output providing active power measurement information for meter calibration, 90ms fixed pulse width for low power measurement, half-period width when output period less than 180ms, frequency adjustable via WA_CFNUM register. |
| 10 | CLKOUT | output | Clock output pin working with CLKIN to provide 3.58MHz clock to chip, can drive CMOS load, can use ceramic load capacitors in crystal circuit. |
| 11 | CLKIN | input | Main clock input for analog and digital processing circuits, accepts external clock or parallel crystal connection at 3.58MHz frequency with 22-33pF ceramic load capacitors. |
| 12 | GND | power_in | Analog circuit reference ground, should connect to analog ground plane or most stable system ground point used by all analog circuits. |
| 13 | TX | output | Serial interface UART data output pin at 4800bps fixed baud rate, no parity, 1 stop bit. |
| 14 | RX | input | Serial interface UART data input pin at 4800bps fixed baud rate, no parity, 1 stop bit, multiplexed with /RST reset function. |
| 15 | VDD | power_in | Positive power supply +5V nominal providing analog section power, normal operation requires +4.5V to +5.5V. |
| 16 | IAP | input | Current channel A analog input (positive), maximum differential voltage ±660mV with adjustable gain via GAIN register, ESD protection to ±1.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | SOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `BL6523GX`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `bl6523gx-etched.step` / `bl6523gx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bl6523gx.step` / `bl6523gx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [BL Shanghai Belling datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884203153346560) (33 pp, sha256 `edf0f9cf4bc2f5fb`, retrieved 2026-09-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/bl6523gx-datasheet.pdf)