component
BL5372 SOP8
Public Made by Adomby adom
BL Shanghai Belling Real Time Clocks, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBL5372 SOP8
BL Shanghai Belling · Real Time Clocks · SOP-8
BL5372 SOP8 from BL Shanghai Belling, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INTRB | output | Interrupt output B; open-drain output capable of 32.768kHz square wave, periodic interrupt pulses, or ALARM-B alarm signal; defaults to 32.768kHz square wave on power-up; requires external pull-up resistor. |
| 2 | SCL | input | I2C serial clock input line; maximum data clock frequency 100kHz; requires external pull-up resistor. |
| 3 | SDA | bidirectional | I2C serial data bidirectional line for two-wire interface; input/output capability for data transfer; requires external pull-up resistor. |
| 4 | GND | power_in | Power supply ground pin; must connect to system ground; requires bypass capacitor placement near pin. |
| 5 | INTRA | output | Interrupt output A; open-drain output for periodic interrupt or alarm signals (ALARM-A, ALARM-B); requires external pull-up resistor. |
| 6 | OSCOUT | output | Crystal oscillator output; connects to external 32.768kHz or 32kHz crystal oscillator with load capacitor for resonant circuit operation. |
| 7 | OSCIN | input | Crystal oscillator input; connects to external 32.768kHz or 32kHz crystal; do not place load capacitor at input pin as it may cause crystal oscillation to stop; place capacitor only at OSCOUT. |
| 8 | VDD | power_in | Operating power supply voltage; supply range 1.8V to 5.5V; typical working current 0.4µA at 3.6V and 25°C; requires bypass capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | SOP-8 |
| Category | Clock/Timing |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
BL5372 SOP8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
bl5372-sop8-etched.step/bl5372-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl5372-sop8.step/bl5372-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL Shanghai Belling datasheet (32 pp, sha256
a9ad06341198c55e, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).