component
BL24C16F-RRRC
Public Made by Adomby adom
BL(Shanghai Belling) EEPROM, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBL24C16F-RRRC
BL(Shanghai Belling) · EEPROM · TSOT-23-5
BL24C16F-RRRC from BL(Shanghai Belling), in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input that clocks data into the EEPROM on the positive edge and out of the device on the negative edge. |
| 2 | GND | power_in | Ground. |
| 3 | SDA | bidirectional | Bidirectional serial data pin for data transfer; open-drain driven and may be wire-ORed with other open-drain or open-collector devices. |
| 4 | VCC | power_in | Power supply, 1.7V to 5.5V (2.5V to 5.5V at 1MHz). |
| 5 | WP | input | Write protect input: normal read/write when connected to GND, full 16K array write-protected when connected to VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL(Shanghai Belling) |
| Package | TSOT-23-5 |
| Category | Memory |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VCC | -0.3 | 6.5 | V | 8 | ||
| Storage Temperature | -65 | 150 | ℃ | 8 | |||
| Electrostatic pulse (Human Body model) | 8000 | V | 8 | ||||
| Supply voltage at 400kHz | VCC | 1.7 | 5.5 | V | @400kHz | 8 | |
| Supply voltage at 1MHz | VCC | 2.5 | 5.5 | V | @1MHz | 8 | |
| Operating temperature | TA | -40 | 85 | ℃ | BL24C16F | 8 | |
| Supply Current Read | ICC1 | 0.14 | 0.3 | mA | VCC=5.0V, READ at 400KHZ | 8 | |
| Supply Current Write | ICC2 | 0.28 | 0.5 | mA | VCC=5.0V, WRITE at 400KHZ | 8 | |
| Standby Supply Current | ISB1 | 0.03 | 0.5 | μA | VCC=5.0V, VIN=VCC or VSS | 8 | |
| Input Leakage Current | IL1 | 0.1 | 1 | μA | VIN=VCC or VSS | 8 | |
| Output Leakage Current | ILO | 0.05 | 1 | μA | VOUT=VCC or VSS | 8 | |
| Input Low Level (min only; max is VCC×0.3) | VIL1 | -0.3 | V | VCC=1.7V to 5.5V | 8 | ||
| Output Low Level | VOL1 | 0.2 | V | VCC=1.7V, IOL=0.15mA | 8 | ||
| Output Low Level | VOL2 | 0.4 | V | VCC=5.0V, IOL=3.0mA | 8 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | TA=25℃, f=1.0MHz, VCC=2.5V, VIO=0V | 8 | ||
| Input Capacitance (A2,SCL) | CIN | 6 | pF | TA=25℃, f=1.0MHz, VCC=2.5V, VIN=0V | 8 | ||
| Clock Frequency, SCL | fSCL | 400 | kHz | 1.7V≤VCC<2.5V | 9 | ||
| Clock Frequency, SCL | fSCL | 1000 | kHz | 2.5V≤VCC<5.5V | 9 | ||
| Clock Pulse Width Low | tLOW | 1.3 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Clock Pulse Width Low | tLOW | 0.5 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Clock Pulse Width High | tHIGH | 0.6 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Clock Pulse Width High | tHIGH | 0.26 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Noise Suppression Time | tI | 50 | ns | 1.7V≤VCC<2.5V | 9 | ||
| Clock Low to Data Out Valid | tAA | 0.9 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Clock Low to Data Out Valid | tAA | 0.45 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Bus free time before new transmission | tBUF | 1.3 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Bus free time before new transmission | tBUF | 0.5 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Start Hold Time | tHD:STA | 0.6 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Start Hold Time | tHD:STA | 0.25 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Start Setup Time | tSU:STA | 0.6 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Start Setup Time | tSU:STA | 0.25 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Data In Hold Time | tHD:DAT | 0 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Data in Setup Time | tSU:DAT | 100 | ns | 1.7V≤VCC<2.5V | 9 | ||
| Input Rise Time | tR | 0.3 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Input Rise Time | tR | 0.12 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Input Fall Time | tF | 0.3 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Input Fall Time | tF | 0.12 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Stop Setup Time | tSU:STO | 0.6 | μs | 1.7V≤VCC<2.5V | 9 | ||
| Stop Setup Time | tSU:STO | 0.25 | μs | 2.5V≤VCC<5.5V | 9 | ||
| Data Out Hold Time | tDH | 50 | ns | 1.7V≤VCC<2.5V | 9 | ||
| Write Cycle Time | tWR | 1.9 | 3 | ms | 1.7V≤VCC<2.5V | 9 |
CAD (KiCad official)
- Symbol:
BL24C16F-RRRC - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
bl24c16f-rrrc-etched.step/bl24c16f-rrrc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl24c16f-rrrc.step/bl24c16f-rrrc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL(Shanghai Belling) datasheet (19 pp, sha256
c1aae41c115bc229, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).