BISS0001DRG

{
  "schema_version": 1,
  "type": "component",
  "slug": "biss0001drg",
  "title": "BISS0001DRG",
  "brief": "HANSCHIP semiconductor Human Body Sensing Sensor, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "sensor",
    "biss0001drg"
  ],
  "component": {
    "mpn": "BISS0001DRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "Sensor",
    "subcategory": "Human Body Sensing Sensor",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2405100907_HANSCHIP-semiconductor-BISS0001DRG_C5145437.pdf",
    "parts": {
      "symbol": "biss0001drg.kicad_sym",
      "footprint": "biss0001drg.kicad_mod",
      "model_3d": "biss0001drg-etched.glb",
      "model_3d_plain": "biss0001drg.glb",
      "model_3d_step": "biss0001drg-etched.step",
      "model_3d_step_plain": "biss0001drg.step",
      "lbr": "biss0001drg.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "A",
        "type": "input",
        "description": "Trigger mode control input. A='1' enables repeatable triggering; A='0' selects non-repeatable trigger mode. VAH >= 3.5 V, VAL <= 1.5 V at VDD=5V."
      },
      {
        "number": "2",
        "name": "VO",
        "type": "output",
        "description": "Control signal output. Driven high on a valid trigger (VS rising edge) and remains high for the delay time Tx; otherwise low. VOH >= 4 V, VOL <= 0.4 V at VDD=5V."
      },
      {
        "number": "3",
        "name": "RR1",
        "type": "passive",
        "description": "Output delay time Tx adjustment pin. External resistor R1 to RC1/capacitor C1 sets Tx ≈ 67025 * R1 * C1."
      },
      {
        "number": "4",
        "name": "RC1",
        "type": "passive",
        "description": "Output delay time Tx adjustment pin. Works with RR1 and external RC network to set delay period Tx."
      },
      {
        "number": "5",
        "name": "RC2",
        "type": "passive",
        "description": "Trigger blocking time Ti adjustment pin. External RC with RR2 sets Ti ≈ 60 * R2 * C2."
      },
      {
        "number": "6",
        "name": "RR2",
        "type": "passive",
        "description": "Trigger blocking time Ti adjustment pin. Works with RC2 to set the blocking period after Tx expires."
      },
      {
        "number": "7",
        "name": "VSS",
        "type": "power_in",
        "description": "Negative supply / ground. Typically tied to 0 V."
      },
      {
        "number": "8",
        "name": "VRF/RESET",
        "type": "input",
        "description": "Reference voltage and reset input. Normally tied to VDD; driving this pin to '0' resets the internal timers."
      },
      {
        "number": "9",
        "name": "VC",
        "type": "input",
        "description": "Trigger inhibit input. Triggering is inhibited when VC < VR (~0.2*VDD) and enabled when VC > VR. Commonly driven by a CdS photocell for ambient-light gating."
      },
      {
        "number": "10",
        "name": "IB",
        "type": "passive",
        "description": "Op-amp bias current setting pin. Connect an external resistor RB (~1 MΩ) from IB to VSS to set the internal op-amp bias."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply input. Operating range 3.0 to 5.0 V; absolute maximum +6 V."
      },
      {
        "number": "12",
        "name": "2OUT",
        "type": "output",
        "description": "Second-stage internal op-amp (OP2) output. Feeds the bidirectional amplitude discriminator (COP1/COP2)."
      },
      {
        "number": "13",
        "name": "2IN-",
        "type": "input",
        "description": "Second-stage op-amp (OP2) inverting input. Typically connected to 2OUT through a feedback network and AC-coupled from 1OUT via C4."
      },
      {
        "number": "14",
        "name": "1IN+",
        "type": "input",
        "description": "First-stage op-amp (OP1) non-inverting input. Typically driven from the pyroelectric PIR sensor output."
      },
      {
        "number": "15",
        "name": "1IN-",
        "type": "input",
        "description": "First-stage op-amp (OP1) inverting input. Used with an external RC feedback network to set OP1 gain."
      },
      {
        "number": "16",
        "name": "1OUT",
        "type": "output",
        "description": "First-stage op-amp (OP1) output. AC-coupled to OP2 via C4 for second-stage amplification."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2405100907_HANSCHIP-semiconductor-BISS0001DRG_C5145437.pdf",
        "pages": 10,
        "sha256": "a73355c54bc97db2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "biss0001drg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "biss0001drg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7300f1f767cbc0935d425ca83cba4a72b23438a6f60247b73fbdf66c80ae95c9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HANSCHIP semiconductor",
      "Package": "SOP-16",
      "Category": "Sensor",
      "Pins": "16"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "biss0001drg"
  ],
  "discovery_pitch": "BISS0001DRG (HANSCHIP semiconductor) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "biss0001drg.kicad_sym",
    "biss0001drg.kicad_mod",
    "biss0001drg.glb",
    "biss0001drg.step",
    "biss0001drg.lbr",
    "docs/hero.png",
    "docs/biss0001drg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "biss0001drg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T17:45:13.195Z"
}