BDR6122F

{
  "slug": "bdr6122f",
  "version": "0.1.0",
  "type": "component",
  "description": "Bardeen Micro Brushed DC Motor Drivers, DFN-8(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "bdr6122f",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bdr6122f.kicad_sym",
    "bdr6122f.kicad_mod",
    "bdr6122f.glb",
    "bdr6122f.step",
    "bdr6122f.lbr",
    "docs/hero.png",
    "docs/bdr6122f-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bdr6122f-hero.glb",
    "bdr6122f-hero.overlay.json",
    "bdr6122f-etched.glb"
  ],
  "component": {
    "mpn": "BDR6122F",
    "manufacturer": "Bardeen Micro",
    "package": "DFN-8(2x2)",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Brushed DC Motor Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922813643431936",
    "parts": {
      "symbol": "bdr6122f.kicad_sym",
      "footprint": "bdr6122f.kicad_mod",
      "model_3d": "bdr6122f-hero.glb",
      "model_3d_plain": "bdr6122f-etched.glb",
      "model_3d_step": "bdr6122f-etched.step",
      "model_3d_step_plain": "bdr6122f.step",
      "lbr": "bdr6122f.lbr"
    },
    "distributor_links": {
      "lcsc": "C22363591"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T05:48:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VM",
        "type": "power_in",
        "description": "Motor power supply, specified 0 to 12 V recommended with an absolute maximum of 13 V, and should be decoupled to GND with low-ESR ceramic capacitance such as 0.1 uF placed close to the pin."
      },
      {
        "number": "2",
        "name": "OUT1",
        "type": "output",
        "description": "H-bridge output 1, driving the DC motor or inductive load between OUT1 and OUT2."
      },
      {
        "number": "3",
        "name": "OUT2",
        "type": "output",
        "description": "H-bridge output 2, driving the DC motor or inductive load between OUT1 and OUT2."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, to be connected with thick traces to the decoupling capacitor returns."
      },
      {
        "number": "5",
        "name": "IN2",
        "type": "input",
        "description": "Logic input 2 for PWM control of OUT2 (IN-IN control mode), with an internal 100 kΩ pull-down and a recommended logic input voltage range of 0 to 6 V."
      },
      {
        "number": "6",
        "name": "IN1",
        "type": "input",
        "description": "Logic input 1 for PWM control of OUT1 (IN-IN control mode), with an internal 100 kΩ pull-down and a recommended logic input voltage range of 0 to 6 V."
      },
      {
        "number": "7",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode input: driving it low puts the device into sleep mode with the H-bridge turned off, and it has an internal 100 kΩ pull-down."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Logic supply, specified 1.8 to 6 V with an absolute maximum of 6.5 V, and includes undervoltage lockout that disables the bridge when VCC falls below 1.7 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet shows a 'Thermal Pad' on the DFN-8 package but does not give it a pin number or state ; The pin-assignment diagram on page 2 and the simplified PCB layout figure on page 4 show pin positio; The order table lists the DFN variant with marking 837 and the SOP8 variant with marking BDR6122F; t"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0401,
        "at": "2026-10-18T05:46:04"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922813643431936",
        "pages": 10,
        "sha256": "1d3f309951fc7301",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bdr6122f.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d2dd72623456370941675ec7b1ddfbb90be72e0aee1f148a6f12c54dfc06c4bb",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bdr6122f-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "228daded3bb120cce344b52f27a374b77dee8ab98e8d08d1c7d8245e1a840b23",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}