component

BD6982FVM-GTR

Public Made by Adom

by adom

ROHM Semicon Motor Driver ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management icsbd6982fvm-gtrfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
bd6982fvm-gtr / README.md
History Download
Ray Publish 0.1.0 6772fd4 11d ago

BD6982FVM-GTR

ROHM Semicon · Motor Driver ICs · MSOP-8

BD6982FVM-GTR from ROHM Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT2 output Motor output 2, BTL soft-switching drive output rated up to 18 V and 800 mA maximum.
2 H+ input Hall input +, operating input range 0.4 V to Vcc/4 with at least 30 mVpp amplitude needed to detect rotation.
3 HB power_out Constant voltage output for the hall element, typically 1.2 V at IHB=-3 mA, with 10 mA maximum output current.
4 H- input Hall input -, operating input range 0.4 V to Vcc/4.
5 AL output Lock alarm signal open-drain output that needs a pull-up resistor, low in normal operation and high on lock detection, rated 18 V and 10 mA maximum.
6 VCC power_in Power supply pin, operating range 2.8 V to 16 V with 18 V absolute maximum.
7 OUT1 output Motor output 1, BTL soft-switching drive output rated up to 18 V and 800 mA maximum.
8 GND power_in Ground pin.

Key specifications

Parameter Value
Manufacturer ROHM Semicon
Package MSOP-8
Category Power Management ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Circuit Current ICC 1.5 4 8 mA Ta=25°C, Vcc=12V, Figure 1 2
Hall Bias Voltage VHB 1.1 1.2 1.3 V IHB=-3mA, Ta=25°C, Vcc=12V 2
Hall Input Offset VOFS 0 6 mV Ta=25°C, Vcc=12V; printed 0 to ±6 2
Input-output Gain GIO 53 55 57 dB Ta=25°C, Vcc=12V 2
Output Voltage VO 0.2 0.45 0.7 V Io=200mA, Upper and Lower total 2
AL Low Voltage VALL 0.2 0.4 V IAL=5mA 2
AL Leak Current IALL 0 5 µA VAL=18V 2
Lock Detection ON Time tON 0.35 0.5 0.65 s Figure 10 2
Lock Detection OFF Time tOFF 2 3 4 s Figure 10 2
Operating Supply Voltage Range VCC 2.8 16 V 2
Hall Input Voltage Range VH 0.4 V 0.4 to Vcc/4 2
Supply Voltage VCC 18 V 1
Power Dissipation Pd 0.58 W Reduce by 4.68mW/°C over 25°C, 70x70x1.6mm glass epoxy board 1
Operating Temperature Topr -40 105 °C 1
Storage Temperature Tstg -55 150 °C 1
Junction Temperature Tjmax 150 °C 1
Output Voltage VOMAX 18 V 1
Output Current IOMAX 800 mA Not to exceed Pd 1
Hall Input Voltage VH 7 V 1
AL Signal Output Voltage VAL 18 V 1
AL Signal Output Current IAL 10 mA 1
HB Output Current IHB 10 mA 1
Lock Detection Time Ratio rLD 6 rLD = tOFF / tON 2

CAD (KiCad official)

  • Symbol: BD6982FVM-GTR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: bd6982fvm-gtr-etched.step / bd6982fvm-gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bd6982fvm-gtr.step / bd6982fvm-gtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ROHM Semicon datasheet (18 pp, sha256 bc21fc34f7baff96, retrieved 2026-10-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF