component
BD6586MUV-E2
Public Made by Adomby adom
ROHM Semicon LED Drivers, VQFN-24-EP(4x4). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+224−8@@ -1,13 +1,234 @@ {+ "schema_version": 1,+ "type": "component", "slug": "bd6586muv-e2",+ "title": "BD6586MUV-E2",+ "brief": "ROHM Semicon LED Drivers, VQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "ROHM Semicon LED Drivers, VQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "led drivers", "bd6586muv-e2" ],+ "component": {+ "mpn": "BD6586MUV-E2",+ "manufacturer": "ROHM Semicon",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588921791540563968",+ "parts": {+ "symbol": "bd6586muv-e2.kicad_sym",+ "footprint": "bd6586muv-e2.kicad_mod",+ "model_3d": "bd6586muv-e2.glb",+ "model_3d_step": "bd6586muv-e2.step",+ "lbr": "bd6586muv-e2.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery/IC power supply input. Recommended operating range 2.7V to 5.5V (absolute max 7V). Bypass with a low-ESR ceramic capacitor near the pin."+ },+ {+ "number": "2",+ "name": "EN1",+ "type": "input",+ "description": "Power control / enable pin 1. Logic input with VthL <= 0.4V and VthH >= 1.4V (max 5.5V), input current ~8.3\u00b5A at 2.5V. Used with EN2 and PWM to select which of LED1-4 current drivers are enabled and can be driven with a PWM signal for power-control PWM dimming."+ },+ {+ "number": "3",+ "name": "EN2",+ "type": "input",+ "description": "Power control / enable pin 2. Logic input with VthL <= 0.4V and VthH >= 1.4V (max 5.5V). Combines with EN1/PWM to enable LED current drivers and supports power-control PWM dimming (100Hz-1kHz)."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for the DC/DC converter block. Tied together with pins 7 and 10 internally; connect to the ground plane."+ },+ {+ "number": "5",+ "name": "PWM",+ "type": "input",+ "description": "PWM dimming input for the current drivers (also acts as an enable). Logic thresholds VthL <= 0.4V, VthH >= 1.4V. Typical PWM frequency 100Hz to 10kHz for current-driver PWM control."+ },+ {+ "number": "6",+ "name": "ISET",+ "type": "input",+ "description": "LED current programming pin. Connect a resistor (RISET) to GND to set nominal LED current: Inormal = 20mA x (24k\u03a9/RISET). ISET voltage typically 0.6V; do not add capacitance (may oscillate)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the ISET resistor. Route RISET's ground leg directly to this pin to preserve current-set accuracy."+ },+ {+ "number": "8",+ "name": "LED1",+ "type": "input",+ "description": "Current sink for LED string 1 (channel 1). Regulated to VLED = 0.5V typ. Maximum 25mA per channel; LED terminal over-voltage protection at 11.5V typ. Absolute max 25V. Leave OPEN if unused."+ },+ {+ "number": "9",+ "name": "LED2",+ "type": "input",+ "description": "Current sink for LED string 2. Same specifications as LED1 (VLED = 0.5V typ, 25mA max, 11.5V LED OVP, 25V abs max)."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground for the current-driver block. Internally connected to pins 4 and 7."+ },+ {+ "number": "11",+ "name": "LED3",+ "type": "input",+ "description": "Current sink for LED string 3. Same specifications as LED1 (VLED = 0.5V typ, 25mA max, 11.5V LED OVP, 25V abs max)."+ },+ {+ "number": "12",+ "name": "LED4",+ "type": "input",+ "description": "Current sink for LED string 4. Same specifications as LED1 (VLED = 0.5V typ, 25mA max, 11.5V LED OVP, 25V abs max)."+ },+ {+ "number": "13",+ "name": "TEST",+ "type": "input",+ "description": "Factory test input, pulled down internally with 100k\u03a9 to GND. Leave open or tie to GND in application."+ },+ {+ "number": "14",+ "name": "TESTO",+ "type": "output",+ "description": "Factory test output. Leave unconnected in application."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND."+ },+ {+ "number": "16",+ "name": "SW",+ "type": "output",+ "description": "Drain of the integrated 28V N-channel switching MOSFET (boost switch node). Absolute max 30.5V. RDS(on) ~0.24\u03a9 typ at Isw = 100mA. Pins 16, 17, 18 are ganged internally; tie to the inductor/SBD anode node."+ },+ {+ "number": "17",+ "name": "SW",+ "type": "output",+ "description": "Boost switch node (paralleled with pins 16 and 18) to lower conduction resistance and improve heat dissipation."+ },+ {+ "number": "18",+ "name": "SW",+ "type": "output",+ "description": "Boost switch node (paralleled with pins 16 and 17)."+ },+ {+ "number": "19",+ "name": "VDET",+ "type": "input",+ "description": "Boost output sense input for external SBD-open detect and output over-voltage protection. SBD-open triggers when VDET < 0.1V; OVP set at 25.5V typ (25.0-26.0V). Absolute max 50.5V."+ },+ {+ "number": "20",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND."+ },+ {+ "number": "21",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground / source return for the integrated switching MOSFET. Route directly to input/output capacitor grounds; separated from analog GND inside the IC."+ },+ {+ "number": "22",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground / source return for the integrated switching MOSFET (paralleled with pin 21)."+ },+ {+ "number": "23",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND."+ },+ {+ "number": "24",+ "name": "TRSW",+ "type": "output",+ "description": "Internal switching-MOSFET gate node. A capacitor to PGND may be connected here to soften the SW slew rate and reduce switching noise at the cost of efficiency."+ },+ {+ "number": "EP",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed thermal pad on the package underside. Must be connected to GND for both thermal dissipation and electrical grounding."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588921791540563968",+ "pages": null,+ "sha256": "788a6aa7f1f338c9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "ROHM Semicon",+ "Package": "VQFN-24-EP(4x4)",+ "Category": "LED Drivers",+ "Pins": "25"+ }+ },+ "variants": [+ {+ "mpn": "BD6586MUV-E2",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "bd6586muv-e2"+ ],+ "discovery_pitch": "BD6586MUV-E2 (ROHM Semicon) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +246,5 @@ "docs/bd6586muv-e2-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }