component
BD6230F-E2
Public Made by Adomby adom
ROHM Semicon Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBD6230F-E2
ROHM Semicon · Brushed DC Motor Drivers · SOP-8
BD6230F-E2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | H-bridge driver output 1; the BD6230 is rated for 0.5 A maximum output current, and the device must not exceed Pd or the ASO. |
| 2 | VCC | power_in | Power supply pin; use all VCC pins at the same voltage, within the recommended supply range of 6 to 32 V. |
| 3 | VCC | power_in | Power supply pin; use all VCC pins at the same voltage, within the recommended supply range of 6 to 32 V. |
| 4 | FIN | input | Forward control input; VIH minimum 2.0 V, VIL maximum 0.8 V, with an input frequency range of 20 kHz to 100 kHz. |
| 5 | RIN | input | Reverse control input; VIH minimum 2.0 V, VIL maximum 0.8 V, with an input frequency range of 20 kHz to 100 kHz. |
| 6 | VREF | power_in | Duty setting pin for PWM duty control; recommended VREF voltage range is 3 to 32 V. |
| 7 | OUT2 | output | H-bridge driver output 2; the BD6230 is rated for 0.5 A maximum output current, and the device must not exceed Pd or the ASO. |
| 8 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (1ch) | ICC | 0.8 | 1.3 | 2.5 | mA | Forward / Reverse / Brake | 6 |
| Stand-by Current | ISTBY | 0 | 10 | µA | Stand-by | 6 | |
| Input High Voltage | VIH | 2 | V | 6 | |||
| Input Low Voltage | VIL | 0.8 | V | 6 | |||
| Input Bias Current | IIH | 30 | 50 | 100 | µA | VIN=5.0V | 6 |
| Output ON-Resistance (Note 8, BD6230) | RON | 1 | 1.5 | 2.5 | Ω | IOUT=0.25A, vertically total | 6 |
| VREF Bias Current | IVREF | -10 | 0 | 10 | µA | VREF=VCC | 6 |
| Carrier Frequency | fPWM | 20 | 25 | 35 | kHz | VREF=18V | 6 |
| Input Frequency Range | fMAX | 20 | 100 | kHz | FIN / RIN | 6 | |
| Supply Voltage (recommended) | VCC | 6 | 32 | V | 6 | ||
| VREF Voltage (recommended) | VREF | 3 | 32 | V | 6 | ||
| Supply Voltage (absolute maximum) | VCC | 36 | V | 6 | |||
| Output Current (absolute maximum, BD6230) | IOMAX | 0.5 | A | Note 1: BD6230. Do not exceed Pd or ASO. | 6 | ||
| All Other Input Pins | VIN | -0.3 | V | Upper limit printed as VCC | 6 | ||
| Operating Temperature | Topr | -40 | 85 | °C | 6 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 6 | ||
| Power Dissipation (SOP8) | Pd | 0.68 | W | Note 4: SOP8, mounted on 70mm x 70mm x 1.6mm glass-epoxy board. Derate by 5.5mW/°C for Ta above 25°C. | 6 | ||
| Junction Temperature | Tjmax | 150 | °C | 6 |
CAD (KiCad official)
- Symbol:
BD6230F-E2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
bd6230f-e2-etched.step/bd6230f-e2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bd6230f-e2.step/bd6230f-e2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (27 pp, sha256
3fcad1eb1603b024, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).