component
BD6220F-E2
Public Made by Adomby adom
ROHM Semicon Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
BD6220F-E2
ROHM Semicon · Brushed DC Motor Drivers · SOP-8
BD6220F-E2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Driver output for H-bridge channel 1 (BD6220F/BD6221F, SOP8). |
| 2 | VCC | power_in | Power supply; the datasheet requires all VCC pins to be held at the same voltage, with a recommended supply range of 6 V to 15 V and an absolute maximum of 18 V. |
| 3 | VCC | power_in | Power supply; the datasheet requires all VCC pins to be held at the same voltage, with a recommended supply range of 6 V to 15 V and an absolute maximum of 18 V. |
| 4 | FIN | input | Forward control input; logic input with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 5 | RIN | input | Reverse control input; logic input with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 6 | VREF | power_in | Duty setting pin for PWM speed control; the VREF voltage is specified at 3 V to 15 V. |
| 7 | OUT2 | output | Driver output for H-bridge channel 2 (BD6220F/BD6221F, SOP8). |
| 8 | GND | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (1ch) | ICC | 0.8 | 1.3 | 2.5 | mA | Forward / Reverse / Brake | 4 |
| Stand-by Current | ISTBY | 0 | 10 | µA | Stand-by | 4 | |
| Input High Voltage | VIH | 2 | V | 4 | |||
| Input Low Voltage | VIL | 0.8 | V | 4 | |||
| Input Bias Current | IIH | 30 | 50 | 100 | µA | VIN=5.0V | 4 |
| Output ON-Resistance (Note 7: BD6220/BD6225) | RON | 1 | 1.5 | 2.5 | Ω | IOUT=0.25A, vertically total | 4 |
| VREF Bias Current | IVREF | -10 | 0 | 10 | µA | VREF= VCC | 4 |
| Carrier Frequency | fPWM | 20 | 25 | 35 | kHz | VREF=9V | 4 |
| Input Frequency Range | fMAX | 20 | 100 | kHz | FIN / RIN | 4 | |
| Supply Voltage | VCC | 18 | V | 4 | |||
| Output Current | IOMAX | 0.5 | A | Note 1 (BD6220/BD6225): do not exceed Pd or ASO | 4 | ||
| All Other Input Pins | VIN | -0.3 | V | Upper limit printed as VCC (symbolic, no number) | 4 | ||
| Operating Temperature | Topr | -40 | 85 | °C | 4 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 4 | ||
| Power Dissipation (SOP8) | Pd | 0.68 | W | Note 4: SOP8, mounted on 70mm x 70mm x 1.6mm glass-epoxy board; derate 5.5mW/°C for Ta above 25°C | 4 | ||
| Junction Temperature | Tjmax | 150 | °C | 4 | |||
| Supply Voltage | VCC | 6 | 15 | V | 4 | ||
| VREF Voltage | VREF | 3 | 15 | V | 4 |
CAD (KiCad official)
- Symbol:
BD6220F-E2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
bd6220f-e2-etched.step/bd6220f-e2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bd6220f-e2.step/bd6220f-e2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (24 pp, sha256
fae8d4f78268f2ea, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# BD6220F-E2
**ROHM Semicon** · Brushed DC Motor Drivers · SOP-8
BD6220F-E2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Driver output for H-bridge channel 1 (BD6220F/BD6221F, SOP8). |
| 2 | VCC | power_in | Power supply; the datasheet requires all VCC pins to be held at the same voltage, with a recommended supply range of 6 V to 15 V and an absolute maximum of 18 V. |
| 3 | VCC | power_in | Power supply; the datasheet requires all VCC pins to be held at the same voltage, with a recommended supply range of 6 V to 15 V and an absolute maximum of 18 V. |
| 4 | FIN | input | Forward control input; logic input with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 5 | RIN | input | Reverse control input; logic input with VIH minimum 2.0 V and VIL maximum 0.8 V. |
| 6 | VREF | power_in | Duty setting pin for PWM speed control; the VREF voltage is specified at 3 V to 15 V. |
| 7 | OUT2 | output | Driver output for H-bridge channel 2 (BD6220F/BD6221F, SOP8). |
| 8 | GND | power_in | Ground reference for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current (1ch) | ICC | 0.8 | 1.3 | 2.5 | mA | Forward / Reverse / Brake | 4 |
| Stand-by Current | ISTBY | | 0 | 10 | µA | Stand-by | 4 |
| Input High Voltage | VIH | 2 | | | V | | 4 |
| Input Low Voltage | VIL | | | 0.8 | V | | 4 |
| Input Bias Current | IIH | 30 | 50 | 100 | µA | VIN=5.0V | 4 |
| Output ON-Resistance (Note 7: BD6220/BD6225) | RON | 1 | 1.5 | 2.5 | Ω | IOUT=0.25A, vertically total | 4 |
| VREF Bias Current | IVREF | -10 | 0 | 10 | µA | VREF= VCC | 4 |
| Carrier Frequency | fPWM | 20 | 25 | 35 | kHz | VREF=9V | 4 |
| Input Frequency Range | fMAX | 20 | | 100 | kHz | FIN / RIN | 4 |
| Supply Voltage | VCC | | | 18 | V | | 4 |
| Output Current | IOMAX | | | 0.5 | A | Note 1 (BD6220/BD6225): do not exceed Pd or ASO | 4 |
| All Other Input Pins | VIN | -0.3 | | | V | Upper limit printed as VCC (symbolic, no number) | 4 |
| Operating Temperature | Topr | -40 | | 85 | °C | | 4 |
| Storage Temperature | Tstg | -55 | | 150 | °C | | 4 |
| Power Dissipation (SOP8) | Pd | | | 0.68 | W | Note 4: SOP8, mounted on 70mm x 70mm x 1.6mm glass-epoxy board; derate 5.5mW/°C for Ta above 25°C | 4 |
| Junction Temperature | Tjmax | | | 150 | °C | | 4 |
| Supply Voltage | VCC | 6 | | 15 | V | | 4 |
| VREF Voltage | VREF | 3 | | 15 | V | | 4 |
## CAD (KiCad official)
- Symbol: `BD6220F-E2`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `bd6220f-e2-etched.step` / `bd6220f-e2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bd6220f-e2.step` / `bd6220f-e2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ROHM Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884271629418496) (24 pp, sha256 `fae8d4f78268f2ea`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/bd6220f-e2-datasheet.pdf)