BD62110AEFJ-E2

{
  "slug": "bd62110aefj-e2",
  "version": "0.1.0",
  "type": "component",
  "description": "ROHM Semicon Brushed DC Motor Drivers, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "bd62110aefj-e2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bd62110aefj-e2.kicad_sym",
    "bd62110aefj-e2.kicad_mod",
    "bd62110aefj-e2.glb",
    "bd62110aefj-e2.step",
    "bd62110aefj-e2.lbr",
    "docs/hero.png",
    "docs/bd62110aefj-e2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bd62110aefj-e2-hero.glb",
    "bd62110aefj-e2-hero.overlay.json",
    "bd62110aefj-e2-etched.glb"
  ],
  "component": {
    "mpn": "BD62110AEFJ-E2",
    "manufacturer": "ROHM Semicon",
    "package": "SOP-8-EP",
    "pin_count": 9,
    "category": "Motor Driver ICs",
    "subcategory": "Brushed DC Motor Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588902307378941952",
    "parts": {
      "symbol": "bd62110aefj-e2.kicad_sym",
      "footprint": "bd62110aefj-e2.kicad_mod",
      "model_3d": "bd62110aefj-e2-hero.glb",
      "model_3d_plain": "bd62110aefj-e2-etched.glb",
      "model_3d_step": "bd62110aefj-e2-etched.step",
      "model_3d_step_plain": "bd62110aefj-e2.step",
      "lbr": "bd62110aefj-e2.lbr"
    },
    "distributor_links": {
      "lcsc": "C239855",
      "digikey": "BD62110AEFJ-E2TR-ND",
      "mouser": "755-BD62110AEFJ-E2"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:33:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "BD62110AEFJ-E2TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "755-BD62110AEFJ-E2",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; keep its wiring impedance as low as possible to reduce switching noise and stabilize the internal reference voltage."
      },
      {
        "number": "2",
        "name": "OUT1",
        "type": "output",
        "description": "H bridge output terminal that carries the motor drive current, so the trace should be thick, short and low impedance, with a Schottky diode optional for large back-EMF; absolute maximum output current is 1.0 A/ch continuous and 2.0 A peak."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply terminal with a recommended operating range of 8 to 28 V and an absolute maximum of -0.2 to +36.0 V, bypassed with a 100µF to 470µF capacitor placed as close as possible to the pin."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; keep its wiring impedance as low as possible to reduce switching noise and stabilize the internal reference voltage."
      },
      {
        "number": "5",
        "name": "IN1",
        "type": "input",
        "description": "H bridge control input that sets the output state together with IN2 (absolute maximum -0.2 to +5.5 V, H level at least 2.0 V, L level at most 0.8 V)."
      },
      {
        "number": "6",
        "name": "IN2",
        "type": "input",
        "description": "H bridge control input that sets the output state together with IN1 (absolute maximum -0.2 to +5.5 V, H level at least 2.0 V, L level at most 0.8 V)."
      },
      {
        "number": "7",
        "name": "TEST",
        "type": "passive",
        "description": "Test terminal used only for distribution testing that must be connected to GND, since the device may malfunction if it is left unconnected."
      },
      {
        "number": "8",
        "name": "OUT2",
        "type": "output",
        "description": "H bridge output terminal that carries the motor drive current, so the trace should be thick, short and low impedance, with a Schottky diode optional for large back-EMF; absolute maximum output current is 1.0 A/ch continuous and 2.0 A peak."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: HTSOP-J8 has an exposed metal back pad that is internally tied to the die back at GND potential. It ; TEST (pin 7) was assigned type 'passive' because the datasheet only says it must be connected to GND; Pin 1 location is shown only in the pin configuration figure, which is not in the extracted text. Th",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0863,
        "at": "2026-10-18T02:32:44"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588902307378941952",
        "pages": 19,
        "sha256": "244f4483ab0a5a3a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bd62110aefj-e2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bd62110aefj-e2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "196687c0f705a6d3d96ca20f62590b660dc90e28e345bf236f7474154cafcc53",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}