component

BD6210F-E2

Public Made by Adom

by adom

ROHM Semicon Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmotor driver icsbd6210f-e2factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 8d ago
viewers bd6210f-e2: viewers · Ray 8d ago
bd6210f-e2-etched.glb Publish 0.1.0 · Ray 8d ago
bd6210f-e2-etched.step bd6210f-e2: factory component page (tier=lcsc) · Ray 8d ago
bd6210f-e2-hero.glb bd6210f-e2: hero GLB from the etched model (keeps the MPN mark) · Ray 8d ago
bd6210f-e2-hero.overlay.json Publish 0.1.0 · Ray 8d ago
bd6210f-e2.glb Publish 0.1.0 · Ray 8d ago
bd6210f-e2.kicad_mod Publish 0.1.0 · Ray 8d ago
bd6210f-e2.kicad_sym Publish 0.1.0 · Ray 8d ago
bd6210f-e2.lbr Publish 0.1.0 · Ray 8d ago
bd6210f-e2.step Publish 0.1.0 · Ray 8d ago
package.json Publish 0.1.0 · Ray 8d ago
page.json Set visibility: public · Ray 8d ago
README.md Publish 0.1.0 · Ray 8d ago

BD6210F-E2

ROHM Semicon · Brushed DC Motor Drivers · SOP-8

BD6210F-E2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output H-bridge driver output 1 drives the motor; output current must stay within the part rating (0.5 A for BD6210, 1.0 A for BD6211) and within Pd and the ASO.
2 VCC power_in Power supply pin; use all VCC pins at the same voltage, within the recommended supply range of 3.0 V to 5.5 V.
3 VCC power_in Power supply pin; use all VCC pins at the same voltage, within the recommended supply range of 3.0 V to 5.5 V.
4 FIN input Forward control input; logic high requires at least 2.0 V (VIH) and logic low must be 0.8 V or less (VIL), with input frequency 20 kHz to 100 kHz.
5 RIN input Reverse control input; logic high requires at least 2.0 V (VIH) and logic low must be 0.8 V or less (VIL), with input frequency 20 kHz to 100 kHz.
6 VREF power_in Duty setting pin for PWM duty control; recommended VREF voltage range is 1.5 V to 5.5 V.
7 OUT2 output H-bridge driver output 2 drives the motor; output current must stay within the part rating (0.5 A for BD6210, 1.0 A for BD6211) and within Pd and the ASO.
8 GND power_in Ground pin; all voltages are referenced to this ground.

Key specifications

Parameter Value
Manufacturer ROHM Semicon
Package SOP-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (1ch) ICC 0.4 0.7 1.5 mA Forward / Reverse / Brake 3
Stand-by Current ISTBY 0 10 µA Stand-by 3
Input High Voltage VIH 2 V 3
Input Low Voltage VIL 0.8 V 3
Input Bias Current IIH 30 50 100 µA VIN=5.0V 3
Output ON-Resistance (BD6210, Note 7) RON 0.5 1 1.5 Ω IOUT=0.25A, vertically total 3
VREF Bias Current IVREF -10 0 10 µA VREF=VCC 3
Carrier Frequency fPWM 20 25 35 kHz VREF=3.75V 3
Input Frequency Range fMAX 20 100 kHz FIN / RIN 3
Supply Voltage (recommended) VCC 3 5.5 V 3
VREF Voltage (recommended) VREF 1.5 5.5 V 3
Supply Voltage (absolute maximum) VCC 7 V 3
Output Current (absolute maximum, BD6210) IOMAX 0.5 A Note 1, BD6210. Do not exceed Pd or ASO. 3
All Other Input Pins (absolute maximum) VIN -0.3 V Upper limit is VCC 3
Power Dissipation (SOP8) Pd 0.68 W Note 4, SOP8, mounted on 70mm x 70mm x 1.6mm glass-epoxy board; derate 5.5mW/°C for Ta above 25°C 3
Operating Temperature Topr -40 85 °C 3
Storage Temperature Tstg -55 150 °C 3
Junction Temperature Tjmax 150 °C 3
Power Dissipation derating (SOP8) 5.5 mW/°C Derate for Ta above 25°C, Note 4 (SOP8, 70mm x 70mm x 1.6mm glass-epoxy board) 3

CAD (KiCad official)

  • Symbol: BD6210F-E2
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: bd6210f-e2-etched.step / bd6210f-e2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bd6210f-e2.step / bd6210f-e2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ROHM Semicon datasheet (23 pp, sha256 8b192175ebc5119f, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF