component
BCR401UW6-7
Public Made by Adomby adom
Diodes Incorporated LED Drivers, SOT-26. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
BCR401UW6-7
Diodes Incorporated · LED Drivers · SOT-26
BCR401UW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground of the regulator. |
| 2 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 3 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 4 | VS | power_in | Supply voltage, up to 40V. |
| 5 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 6 | Rext | passive | Optional external resistor pin for adjusting the output current above the preset 10mA, up to 100mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current (Nominal) | IOUT | 9 | 10 | 11 | mA | VOUT = 8.6V; VS = 10V | 3 |
| Collector-Emitter Breakdown Voltage | BVCEO | 40 | V | IC = 1mA | 3 | ||
| GND (Enable) Current | IGND | 340 | 420 | 500 | µA | VS = 10V; VOUT = Open | 3 |
| DC Current Gain | hFE | 100 | 220 | 470 | , | IC = 50mA; VCE = 1V | 3 |
| Internal Resistor | RINT | 78 | 91 | 104 | Ω | IRINT = 10mA | 3 |
| GND (Enable) Current | IGND | 380 | µA | VS = 10V; VOUT = 8.6V | 3 | ||
| Voltage Drop (VREXT) | VDROP | 0.91 | V | IOUT = 10mA | 3 | ||
| Lowest Sufficient Supply Voltage (VS-VOUT) | VSMIN | 1.4 | V | IOUT > 8mA | 3 | ||
| Output Current Change vs. Temperature | ΔIOUT/IOUT | -0.25 | %/°C | VS = 10V | 3 | ||
| Output Current Change vs. Supply Voltage | ΔIOUT/IOUT | 1 | %/V | VS = 10V | 3 | ||
| Supply Voltage | VS | 40 | V | relative to GND, TA = +25°C | 2 | ||
| Output Current | IOUT | 100 | mA | TA = +25°C | 2 | ||
| Output Voltage | VOUT | 40 | V | relative to GND, TA = +25°C | 2 | ||
| Reverse voltage between all terminals | VR | 0.5 | V | TA = +25°C | 2 | ||
| Power Dissipation | PD | 1190 | mW | Note 5: OUT leads on 50mm x 50mm 1oz copper | 2 | ||
| Power Dissipation | PD | 912 | mW | Note 6: 25mm x 25mm 1oz copper | 2 | ||
| Maximum Operating Junction and Storage Temperature Range | TJ, TSTG | -65 | 150 | °C | 2 | ||
| Recommended Operating Junction Temperature Range | TJ | -55 | 150 | °C | 2 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 105 | °C/W | Note 5: 50mm x 50mm 1oz copper | 2 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 137 | °C/W | Note 6: 25mm x 25mm 1oz copper | 2 | ||
| Thermal Resistance, Junction to Lead | RθJL | 50 | °C/W | Note 7 | 2 | ||
| Electrostatic Discharge, Human Body Model | ESD HBM | 800 | V | JEDEC Class 1B | 2 | ||
| Electrostatic Discharge, Machine Model | ESD MM | 300 | V | JEDEC Class B | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
BCR401UW6-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files:
bcr401uw6-7-etched.step/bcr401uw6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bcr401uw6-7.step/bcr401uw6-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
c5156d95ab88ad08, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# BCR401UW6-7
**Diodes Incorporated** · LED Drivers · SOT-26
BCR401UW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground of the regulator. |
| 2 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 3 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 4 | VS | power_in | Supply voltage, up to 40V. |
| 5 | OUT | passive | Regulated output current to the LED string, up to 100mA and 40V; connect to copper for heat sinking. |
| 6 | Rext | passive | Optional external resistor pin for adjusting the output current above the preset 10mA, up to 100mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current (Nominal) | IOUT | 9 | 10 | 11 | mA | VOUT = 8.6V; VS = 10V | 3 |
| Collector-Emitter Breakdown Voltage | BVCEO | 40 | | | V | IC = 1mA | 3 |
| GND (Enable) Current | IGND | 340 | 420 | 500 | µA | VS = 10V; VOUT = Open | 3 |
| DC Current Gain | hFE | 100 | 220 | 470 |, | IC = 50mA; VCE = 1V | 3 |
| Internal Resistor | RINT | 78 | 91 | 104 | Ω | IRINT = 10mA | 3 |
| GND (Enable) Current | IGND | | 380 | | µA | VS = 10V; VOUT = 8.6V | 3 |
| Voltage Drop (VREXT) | VDROP | | 0.91 | | V | IOUT = 10mA | 3 |
| Lowest Sufficient Supply Voltage (VS-VOUT) | VSMIN | | 1.4 | | V | IOUT > 8mA | 3 |
| Output Current Change vs. Temperature | ΔIOUT/IOUT | | -0.25 | | %/°C | VS = 10V | 3 |
| Output Current Change vs. Supply Voltage | ΔIOUT/IOUT | | 1 | | %/V | VS = 10V | 3 |
| Supply Voltage | VS | | | 40 | V | relative to GND, TA = +25°C | 2 |
| Output Current | IOUT | | | 100 | mA | TA = +25°C | 2 |
| Output Voltage | VOUT | | | 40 | V | relative to GND, TA = +25°C | 2 |
| Reverse voltage between all terminals | VR | | | 0.5 | V | TA = +25°C | 2 |
| Power Dissipation | PD | | | 1190 | mW | Note 5: OUT leads on 50mm x 50mm 1oz copper | 2 |
| Power Dissipation | PD | | | 912 | mW | Note 6: 25mm x 25mm 1oz copper | 2 |
| Maximum Operating Junction and Storage Temperature Range | TJ, TSTG | -65 | | 150 | °C | | 2 |
| Recommended Operating Junction Temperature Range | TJ | -55 | | 150 | °C | | 2 |
| Thermal Resistance, Junction to Ambient | RθJA | | 105 | | °C/W | Note 5: 50mm x 50mm 1oz copper | 2 |
| Thermal Resistance, Junction to Ambient | RθJA | | 137 | | °C/W | Note 6: 25mm x 25mm 1oz copper | 2 |
| Thermal Resistance, Junction to Lead | RθJL | | 50 | | °C/W | Note 7 | 2 |
| Electrostatic Discharge, Human Body Model | ESD HBM | | 800 | | V | JEDEC Class 1B | 2 |
| Electrostatic Discharge, Machine Model | ESD MM | | 300 | | V | JEDEC Class B | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
## CAD (KiCad official)
- Symbol: `BCR401UW6-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files: `bcr401uw6-7-etched.step` / `bcr401uw6-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bcr401uw6-7.step` / `bcr401uw6-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/BCR401UW6-7.pdf) (13 pp, sha256 `c5156d95ab88ad08`, retrieved 2026-10-22, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/bcr401uw6-7-datasheet.pdf)