component
BC847C-7-F
Public Made by Adomby adom
Diodes Incorporated Bipolar Transistors - BJT, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownBC847C-7-F
Diodes Incorporated · Bipolar Transistors - BJT · SOT-23
BC847C-7-F from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base; bottom-left lead in the top-view pin-out, with VEBO of 6.0 V max for BC847 and 100 mA continuous collector current rating of the device. |
| 2 | E | passive | Emitter; bottom-right lead in the top-view pin-out, with peak emitter current IEM limited to 200 mA. |
| 3 | C | passive | Collector; single lead on the top side in the top-view pin-out, with VCEO of 45 V max and continuous collector current IC of 100 mA for BC847. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Voltage | VCBO | 50 | V | BC847A/B/C | 2 | ||
| Collector-Emitter Voltage | VCEO | 45 | V | BC847A/B/C | 2 | ||
| Emitter-Base Voltage | VEBO | 6 | V | BC846A/B, BC847A/B/C | 2 | ||
| Continuous Collector Current | IC | 100 | mA | 2 | |||
| Peak Collector Current | ICM | 200 | mA | 2 | |||
| Peak Emitter Current | IEM | 200 | mA | 2 | |||
| Power Dissipation (Note 5) | PD | 310 | mW | Note 5: minimum recommended pad layout, TA = +25°C | 2 | ||
| Power Dissipation (Note 6) | PD | 350 | mW | Note 6: 15mm x 15mm 1oz copper, TA = +25°C | 2 | ||
| Thermal Resistance, Junction to Ambient (Note 5) | RθJA | 403 | °C/W | Note 5: minimum recommended pad layout | 2 | ||
| Thermal Resistance, Junction to Ambient (Note 6) | RθJA | 357 | °C/W | Note 6: 15mm x 15mm 1oz copper | 2 | ||
| Thermal Resistance, Junction to Leads | RθJL | 350 | °C/W | Note 7 | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -65 | 150 | °C | 2 | ||
| ESD Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A | 2 | ||
| ESD Machine Model | ESD MM | 400 | V | JEDEC Class C | 2 | ||
| Collector-Base Breakdown Voltage | BVCBO | 50 | V | IC = 10µA | 4 | ||
| Collector-Emitter Breakdown Voltage | BVCEO | 45 | V | IC = 10mA | 4 | ||
| Emitter-Base Breakdown Voltage | BVEBO | 6 | V | IE = 1µA | 4 | ||
| Collector Cutoff Current | ICBO | 15 | nA | VCB = 30V | 4 | ||
| Collector Cutoff Current | ICBO | 5 | µA | VCB = 30V, TJ = +150°C | 4 | ||
| Collector Emitter Cutoff Current | ICES | 15 | nA | VCE = 50V | 4 | ||
| Emitter Base Cutoff Current | IEBO | 100 | nA | VEB = 5V | 4 | ||
| DC Current Gain | hFE | 420 | 520 | 800 | IC = 2.0mA, VCE = 5V | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 90 | 250 | mV | IC = 10mA, IB = 0.5mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 200 | 600 | mV | IC = 100mA, IB = 5.0mA | 4 | |
| Base-Emitter Turn-On Voltage | VBE(on) | 580 | 660 | 700 | mV | IC = 2mA, VCE = 5V | 4 |
| Base-Emitter Turn-On Voltage | VBE(on) | 770 | mV | IC = 10mA, VCE = 5V | 4 | ||
| Transition Frequency | fT | 100 | 300 | MHz | VCE = 5V, IC = 10mA, f = 100MHz | 4 | |
| Noise Figure | NF | 2 | 10 | dB | VCE = 5V, IC = 200µA, RS = 2kΩ, f = 1kHz, ∆f = 200Hz | 4 | |
| Small Signal Current Gain | hFE | 600 | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | |||
| Input Impedance | hie | 8.7 | kΩ | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | ||
| Output Admittance | hoe | 60 | µS | IC = 2.0mA, VCE = 5V, f = 1.0kHz | 4 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | 700 | mV | IC = 10mA, IB = 0.5mA | 4 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | 900 | mV | IC = 100mA, IB = 5mA | 4 | ||
| Output Capacitance | Cobo | 3 | pF | VCB = 10V, f = 1.0MHz | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
BC847C-7-F - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
bc847c-7-f-etched.step/bc847c-7-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bc847c-7-f.step/bc847c-7-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (7 pp, sha256
4c2c7141238f9de1, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).