component
BA4560RFVM-TR
Public Made by Adomby adom
ROHM Semicon Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
BA4560RFVM-TR
ROHM Semicon · Operational Amplifier · MSOP-8
BA4560RFVM-TR from ROHM Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1 (CH1), which is paired with -IN1 and +IN1. |
| 2 | -IN1 | input | Inverting input of op-amp channel 1. |
| 3 | +IN1 | input | Non-inverting input of op-amp channel 1. |
| 4 | VEE | power_in | Negative supply pin of the device (split supply, ±4V to ±15V per the key specification on page 1). |
| 5 | +IN2 | input | Non-inverting input of op-amp channel 2. |
| 6 | -IN2 | input | Inverting input of op-amp channel 2. |
| 7 | OUT2 | output | Output of op-amp channel 2 (CH2), which is paired with -IN2 and +IN2. |
| 8 | VCC | power_in | Positive supply pin of the device (split supply, ±4V to ±15V per the key specification on page 1). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC-VEE) | VCC-VEE | 36 | V | 4 | |||
| Differential Input Voltage | VID | 36 | V | Note 7 | 4 | ||
| Input Current | II | -10 | mA | Note 8: input voltages below VEE-0.6V | 4 | ||
| Operating Supply Voltage Range | Vopr | 8 | 30 | V | Printed as +8 to +30 (±4 to ±15) | 4 | |
| Operating Temperature Range | Topr | -40 | 105 | ℃ | BA4560Rxxx column | 4 | |
| Storage Temperature Range | Tstg | -55 | 150 | ℃ | BA4560Rxxx column | 4 | |
| Maximum Junction Temperature | TJMAX | 150 | ℃ | BA4560Rxxx column | 4 | ||
| Power Dissipation (MSOP8) | PD | 0.58 | W | MSOP8, Notes 4 and 6: FR4 glass epoxy PCB 70mm×70mm×1.6mm; reduce 4.7mW above TA=25℃ | 4 | ||
| Input Offset Voltage (25℃) | VIO | 0.5 | 6 | mV | VOUT=0V | 6 | |
| Input Offset Voltage (full range) | VIO | 7 | mV | Full range -40℃ to +105℃; VOUT=0V | 6 | ||
| Input Offset Current (25℃) | IIO | 5 | 200 | nA | VOUT=0V | 6 | |
| Input Offset Current (full range) | IIO | 200 | nA | Full range -40℃ to +105℃; VOUT=0V | 6 | ||
| Input Bias Current (25℃) | IB | 50 | 500 | nA | VOUT=0V | 6 | |
| Input Bias Current (full range) | IB | 800 | nA | Full range -40℃ to +105℃; VOUT=0V | 6 | ||
| Supply Current (25℃) | ICC | 3 | 7 | mA | RL=∞, All Op-Amps | 6 | |
| Supply Current (full range) | ICC | 7.5 | mA | Full range -40℃ to +105℃; VIN+=0V | 6 | ||
| Maximum Output Voltage (25℃) | VOM | 12 | 14 | V | RL≥ 2kΩ; printed ±12 / ±14, sign applies to both rails | 6 | |
| Maximum Output Voltage (full range) | VOM | 10 | 11.5 | V | Full range -40℃ to +105℃; IO=25mA; printed ±10 / ±11.5 | 6 | |
| Large Signal Voltage Gain (25℃) | AV | 86 | 100 | dB | RL≥ 2kΩ, VOUT=±10V | 6 | |
| Large Signal Voltage Gain (full range) | AV | 83 | dB | Full range -40℃ to +105℃; VICM=0V | 6 | ||
| Input Common-mode Voltage Range (25℃) | VICM | 12 | 14 | V | printed ±12 / ±14, sign applies to both rails | 6 | |
| Input Common-mode Voltage Range (full range) | VICM | 12 | V | Full range -40℃ to +105℃; printed ±12 | 6 | ||
| Common-mode Rejection Ratio | CMRR | 70 | 90 | dB | 25℃; VICM=-12V～+12V | 6 | |
| Power Supply Rejection Ratio | PSRR | 76.5 | 90 | dB | 25℃; RI≤ 10kΩ | 6 | |
| Channel Separation | CS | 105 | dB | 25℃; R1=100Ω,f=1kHz | 6 | ||
| Slew Rate | SR | 4 | V/μs | 25℃; AV=0dB, RL=2kΩ, CL=100pF | 6 | ||
| Unity Gain Frequency | fT | 4 | MHz | 25℃; RL=2kΩ | 6 | ||
| Total Harmonic Distortion+Noise | THD+N | 0.003 | % | 25℃; AV=20dB, RL=2kΩ, VIN=0.05Vrms, f=1kHz | 6 | ||
| Input Referred Noise Voltage | VN | 8 | nV/ Hz | 25℃; RS=100Ω, VI=0V, f=1kHz | 6 | ||
| Input Referred Noise Voltage (DIN-AUDIO) | VN | 1 | μVrms | 25℃; DIN-AUDIO | 6 |
CAD (KiCad official)
- Symbol:
BA4560RFVM-TR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ba4560rfvm-tr-etched.step/ba4560rfvm-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ba4560rfvm-tr.step/ba4560rfvm-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (53 pp, sha256
0455c26819198666, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# BA4560RFVM-TR
**ROHM Semicon** · Operational Amplifier · MSOP-8
BA4560RFVM-TR from ROHM Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1 (CH1), which is paired with -IN1 and +IN1. |
| 2 | -IN1 | input | Inverting input of op-amp channel 1. |
| 3 | +IN1 | input | Non-inverting input of op-amp channel 1. |
| 4 | VEE | power_in | Negative supply pin of the device (split supply, ±4V to ±15V per the key specification on page 1). |
| 5 | +IN2 | input | Non-inverting input of op-amp channel 2. |
| 6 | -IN2 | input | Inverting input of op-amp channel 2. |
| 7 | OUT2 | output | Output of op-amp channel 2 (CH2), which is paired with -IN2 and +IN2. |
| 8 | VCC | power_in | Positive supply pin of the device (split supply, ±4V to ±15V per the key specification on page 1). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC-VEE) | VCC-VEE | | | 36 | V | | 4 |
| Differential Input Voltage | VID | | | 36 | V | Note 7 | 4 |
| Input Current | II | -10 | | | mA | Note 8: input voltages below VEE-0.6V | 4 |
| Operating Supply Voltage Range | Vopr | 8 | | 30 | V | Printed as +8 to +30 (±4 to ±15) | 4 |
| Operating Temperature Range | Topr | -40 | | 105 | ℃ | BA4560Rxxx column | 4 |
| Storage Temperature Range | Tstg | -55 | | 150 | ℃ | BA4560Rxxx column | 4 |
| Maximum Junction Temperature | TJMAX | | | 150 | ℃ | BA4560Rxxx column | 4 |
| Power Dissipation (MSOP8) | PD | | | 0.58 | W | MSOP8, Notes 4 and 6: FR4 glass epoxy PCB 70mm×70mm×1.6mm; reduce 4.7mW above TA=25℃ | 4 |
| Input Offset Voltage (25℃) | VIO | | 0.5 | 6 | mV | VOUT=0V | 6 |
| Input Offset Voltage (full range) | VIO | | | 7 | mV | Full range -40℃ to +105℃; VOUT=0V | 6 |
| Input Offset Current (25℃) | IIO | | 5 | 200 | nA | VOUT=0V | 6 |
| Input Offset Current (full range) | IIO | | | 200 | nA | Full range -40℃ to +105℃; VOUT=0V | 6 |
| Input Bias Current (25℃) | IB | | 50 | 500 | nA | VOUT=0V | 6 |
| Input Bias Current (full range) | IB | | | 800 | nA | Full range -40℃ to +105℃; VOUT=0V | 6 |
| Supply Current (25℃) | ICC | | 3 | 7 | mA | RL=∞, All Op-Amps | 6 |
| Supply Current (full range) | ICC | | | 7.5 | mA | Full range -40℃ to +105℃; VIN+=0V | 6 |
| Maximum Output Voltage (25℃) | VOM | 12 | 14 | | V | RL≥ 2kΩ; printed ±12 / ±14, sign applies to both rails | 6 |
| Maximum Output Voltage (full range) | VOM | 10 | 11.5 | | V | Full range -40℃ to +105℃; IO=25mA; printed ±10 / ±11.5 | 6 |
| Large Signal Voltage Gain (25℃) | AV | 86 | 100 | | dB | RL≥ 2kΩ, VOUT=±10V | 6 |
| Large Signal Voltage Gain (full range) | AV | 83 | | | dB | Full range -40℃ to +105℃; VICM=0V | 6 |
| Input Common-mode Voltage Range (25℃) | VICM | 12 | 14 | | V | printed ±12 / ±14, sign applies to both rails | 6 |
| Input Common-mode Voltage Range (full range) | VICM | 12 | | | V | Full range -40℃ to +105℃; printed ±12 | 6 |
| Common-mode Rejection Ratio | CMRR | 70 | 90 | | dB | 25℃; VICM=-12V～+12V | 6 |
| Power Supply Rejection Ratio | PSRR | 76.5 | 90 | | dB | 25℃; RI≤ 10kΩ | 6 |
| Channel Separation | CS | | 105 | | dB | 25℃; R1=100Ω,f=1kHz | 6 |
| Slew Rate | SR | | 4 | | V/μs | 25℃; AV=0dB, RL=2kΩ, CL=100pF | 6 |
| Unity Gain Frequency | fT | | 4 | | MHz | 25℃; RL=2kΩ | 6 |
| Total Harmonic Distortion+Noise | THD+N | | 0.003 | | % | 25℃; AV=20dB, RL=2kΩ, VIN=0.05Vrms, f=1kHz | 6 |
| Input Referred Noise Voltage | VN | | 8 | | nV/ Hz | 25℃; RS=100Ω, VI=0V, f=1kHz | 6 |
| Input Referred Noise Voltage (DIN-AUDIO) | VN | | 1 | | μVrms | 25℃; DIN-AUDIO | 6 |
## CAD (KiCad official)
- Symbol: `BA4560RFVM-TR`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ba4560rfvm-tr-etched.step` / `ba4560rfvm-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ba4560rfvm-tr.step` / `ba4560rfvm-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ROHM Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603006433613541376) (53 pp, sha256 `0455c26819198666`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ba4560rfvm-tr-datasheet.pdf)