Generated by kicad-footprint-generator · KiCad file format 20260206
BA3308F-E2
ROHM Semicon · Audio Power OpAmps · SOIC-14
BA3308F-E2 from ROHM Semicon, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT1 | output | Channel 1 output, with its operating point fixed at 3VF so the maximum output voltage is about 1.2 Vrms typ. (THD=1%). |
| 2 | GND | power_in | Ground. |
| 3 | N.C. | no_connect | No connection. |
| 4 | ALC | passive | ALC time-constant pin, where C7 and R7 set the ALC attack and recovery times, and it is grounded during playback. |
| 5 | VCC | power_in | Supply pin with ripple-filter capacitor C8; the operating supply range is 4.5 V to 14 V and the absolute maximum is 16 V. |
| 6 | N.C. | no_connect | No connection. |
| 7 | OUTPUT2 | output | Channel 2 output, with its operating point fixed at 3VF in the same way as channel 1. |
| 8 | N.C. | no_connect | No connection. |
| 9 | INPUT2 | input | Channel 2 input line, which can be direct coupled or used with a coupling capacitor, with typical input resistance of 25 kΩ (15 to 45 kΩ). |
| 10 | NF2 | passive | Channel 2 negative-feedback node used with the R9/C9 network to form the NAB playback time constant. |
| 11 | NF1 | passive | Channel 1 negative-feedback node used with the R11/C9 network to form the NAB playback time constant. |
| 12 | N.C. | no_connect | No connection. |
| 13 | INPUT1 | input | Channel 1 input line, which can be direct coupled or used with a coupling capacitor, with typical input resistance of 25 kΩ (15 to 45 kΩ). |
| 14 | N.C. | no_connect | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOIC-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent current | IQ | 1.5 | 3.5 | 4.5 | mA | VIN=0Vrms | 2 |
| Open loop voltage gain | GVO | 70 | 80 | dB | VOUT=-10dBV | 2 | |
| Total harmonic distortion | THD | 0.1 | 0.3 | % | NAB34dB, VOUT=40mVrms | 2 | |
| Input resistance | RIN | 15 | 25 | 45 | k | 2 | |
| Maximum output voltage | VOM | 0.6 | 1.2 | Vrms | THD=1% | 2 | |
| Input conversion noise voltage | VNIN | 1 | 2 | Vrms | Rg=2.2k, referenced to NAB 34dB at 1kHz | 2 | |
| ALC range | ALC | 40 | 45 | dB | Rg=3.9 k, VIN -70 dBV standard, THD=3% | 2 | |
| ALC channel balance | ALC | 0 | 2.5 | dB | VIN=-60dBV,-30dBV | 2 | |
| Channel separation | CS | 60 | 75 | dB | VO=0dBV, NAB 34dB | 2 | |
| Supply voltage (operating) | VCC | 4.5 | 14 | V | 2 | ||
| Supply voltage (absolute maximum) | VCC | 16 | V | 2 | |||
| Power dissipation (BA3308F, SOP14) | Pd | 450 | mW | Reduce by 4.5 mW/ C over 25 C, when mounted on a 70mm 70mm 1.6mm PCB board | 2 | ||
| Operating temperature | Topr | 75 | Lower bound printed as 25 without minus sign in extraction; not recorded | 2 | |||
| Storage temperature | Tstg | 125 | Lower bound printed as 55 without minus sign in extraction; not recorded | 2 |
CAD (KiCad official)
- Symbol:
BA3308F-E2 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ba3308f-e2-etched.step/ba3308f-e2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ba3308f-e2.step/ba3308f-e2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (12 pp, sha256
4320b213fdcd7a05, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).