component
BA10393F-E2
Public Made by Adomby adom
ROHM Semicon Comparators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBA10393F-E2
ROHM Semicon · Comparators · SOP-8
BA10393F-E2 from ROHM Semicon, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 comparator output, an open collector output that is ground-sense operated. |
| 2 | -IN1 | input | Channel 1 inverting input, ground-sense operated, with common-mode range (VEE-0.3) to (VEE+36) V. |
| 3 | +IN1 | input | Channel 1 non-inverting input, ground-sense operated, with common-mode range (VEE-0.3) to (VEE+36) V. |
| 4 | VEE | power_in | Negative supply pin; operating supply is +2.0V to +36.0V single supply or ±1.0V to ±18.0V split supply. |
| 5 | +IN2 | input | Channel 2 non-inverting input, ground-sense operated, with common-mode range (VEE-0.3) to (VEE+36) V. |
| 6 | -IN2 | input | Channel 2 inverting input, ground-sense operated, with common-mode range (VEE-0.3) to (VEE+36) V. |
| 7 | OUT2 | output | Channel 2 comparator output, an open collector output that is ground-sense operated. |
| 8 | VCC | power_in | Positive supply pin; supply voltage VCC-VEE is rated to +36 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VIO | 1 | 5 | mV | 25°C; OUT=1.4V | 7 | |
| Input Offset Current | IIO | 5 | 50 | nA | 25°C; OUT=1.4V | 7 | |
| Input Bias Current | IB | 50 | 250 | nA | 25°C; OUT=1.4V | 7 | |
| Input Common-mode Voltage Range (lower limit) | VICM | 0 | V | 25°C | 7 | ||
| Large Signal Voltage Gain | AV | 50 | 200 | V/mV | VCC=15V, OUT=1.4 ~ 11.4V | 7 | |
| Large Signal Voltage Gain | AV | 94 | 106 | dB | RL=15kΩ, VRL=15V | 7 | |
| Supply Current | ICC | 0.4 | 1 | mA | RL=∞, All Comparators | 7 | |
| Output Sink Current | ISINK | 6 | 16 | mA | -IN=1V, +IN=0V; OUT=1.5V | 7 | |
| Output Saturation Voltage (Low Level Output Voltage) | VOL | 250 | 400 | mV | -IN=1V, +IN=0V; ISINK=4mA | 7 | |
| Output Leakage Current (High Level Output Current) | ILEAK | 1 | μA | 25°C; -IN=0V, +IN=1V; OUT=36V | 7 | ||
| Supply Voltage | VCC-VEE | 36 | V | 5 | |||
| Power Dissipation (SOP8) | PD | 0.62 | W | Mounted on FR4 glass epoxy PCB (70mm×70mm×1.6mm); reduce 6.2mW above TA=25°C | 5 | ||
| Input Current | II | -10 | mA | Excessive input current flows if differential input above ~0.6V is applied without limiting resistance | 5 | ||
| Operating Supply Voltage (single supply) | Vopr | 2 | 36 | V | Single supply | 5 | |
| Operating Supply Voltage (split supply, magnitude) | Vopr | 1 | 18 | V | Split supply, ±VCC/VEE magnitude | 5 | |
| Operating Temperature Range | Topr | -40 | 85 | °C | 5 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 5 | ||
| Maximum Junction Temperature | Tjmax | 125 | °C | 5 |
CAD (KiCad official)
- Symbol:
BA10393F-E2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ba10393f-e2-etched.step/ba10393f-e2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ba10393f-e2.step/ba10393f-e2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (56 pp, sha256
d1de262c6af5bcd6, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).