component
AZ7033RTR-G1
Public Made by Adomby adom
Diodes Incorporated Monitors & Reset Circuits, SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAZ7033RTR-G1
Diodes Incorporated · Monitors & Reset Circuits · SOT-89-3L
AZ7033RTR-G1 from Diodes Incorporated, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input, recommended maximum 18V (absolute maximum 20V), with minimum operating voltage for valid output of 0.8V typical. |
| 2 | GND | power_in | Ground reference for the detector and the open-collector output transistor. |
| 3 | OUT | output | Open-collector reset output that is pulled low when VCC falls below the detect voltage (VOL 0.4V max, sink current 20mA typical at 25C) and needs an external pull-up resistor, with 0.1uA max leakage at VCC=18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89-3L |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Detect Voltage | VDET | 3.15 | 3.3 | 3.45 | V | RL=200Ω, VOL ≤ 0.4V, AZ7033R/Z | 5 |
| Low-level Output Voltage | VOL | 0.4 | V | VCC=VDET(min)-0.05V, RL=200Ω | 5 | ||
| Output Leakage Current | IOH | 0.1 | µA | VCC=18V | 5 | ||
| Hysteresis Voltage | VHYS | 30 | 50 | 100 | mV | RL=200Ω | 5 |
| Detect Voltage Temperature Coefficient | ΔVDET/(VDET×ΔT) | -0.01 | 0.01 | %/°C | RL=200Ω | 5 | |
| Circuit Current at On Time | ICCL | 300 | 500 | µA | VCC=VDET(min)-0.05V | 5 | |
| Circuit Current at Off Time | ICCH | 30 | 50 | µA | VCC=5.25V | 5 | |
| Output Current at On Time I | IOL I | 20 | mA | VCC=VDET(min)-0.05V, TA=25°C | 5 | ||
| Output Current at On Time II | IOL II | 16 | mA | VCC=VDET(min)-0.05V, TA=-40 to 85°C | 5 | ||
| Minimum Operating Voltage | VOPR | 0.8 | V | RL=200Ω, VOL ≤ 0.4V | 5 | ||
| L Transmission Delay Time | tpHL | 10 | µs | VCC changed from 5.25V to VDET(min)-0.05V, RL=1.0KΩ, CL=100p | 5 | ||
| H Transmission Delay Time | tpLH | 15 | µs | VCC changed from VDET(min)-0.05V to 5.25V, RL=1.0KΩ, CL=100p | 5 | ||
| Thermal Resistance (Junction to Case), SOT-89 | θJC | 74 | °C/W | SOT-89 | 5 | ||
| Supply Voltage (absolute maximum) | VCC | -0.3 | 20 | V | 4 | ||
| Power Dissipation SOT-89 | PD | 500 | mW | Package limitations, TA=25°C, SOT-89 | 4 | ||
| Operating Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Supply Voltage (recommended) | VCC | 18 | V | 4 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 |
CAD (KiCad official)
- Symbol:
AZ7033RTR-G1 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
az7033rtr-g1-etched.step/az7033rtr-g1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);az7033rtr-g1.step/az7033rtr-g1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
60fb3b9a065f0598, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).