AZ431AN-ATRG1

{
 "schema": "adom.pads/1",
 "slug": "az431an-atrg1",
 "footprint": "SOT-23",
 "generated_from": {
  "footprint": "SOT-23@sha256:0d88c86c1b6d8c1a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.9375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23@sha256:0d88c86c1b6d8c1a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "REF",
   "type": "input",
   "description": "Reference input to the internal error amplifier. The device regulates so that V(REF) equals the internal 2.5 V bandgap reference. Reference input current range is +/-10 mA absolute max; typical bias current is in the microamp range. Connect to the tap of the external resistor divider from CATHODE to ANODE that sets the shunt regulation voltage: V_KA = (1 + R1/R2) * V_REF.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "CATHODE",
   "type": "passive",
   "description": "Cathode of the shunt regulator (equivalent to a programmable Zener cathode). Sinks the regulated current (I_KA) from the load through an internal pass transistor when V_KA reaches the programmed threshold. Rated V_KA up to 40 V absolute max (36 V recommended), continuous cathode current -100 to +150 mA absolute max (1-100 mA recommended operating).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.9375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "ANODE",
   "type": "passive",
   "description": "Anode of the shunt regulator; the internal reference and error amplifier ground return. Connect to the negative side of the shunt (typically circuit ground / the low side of the R1/R2 divider).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}