component
AZ1117ID-ADJTRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AZ1117ID-ADJTRG1
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
AZ1117ID-ADJTRG1 from Diodes Incorporated, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Adjust pin of the ADJ version, which sources about 60 µA typical (120 µA max) into the reference divider; it serves as GND on the fixed-output versions. |
| 2 | OUTPUT | power_out | Regulated output; a minimum 10 µF output capacitor is required, with ESR below 20 Ω. |
| 3 | INPUT | power_in | Unregulated input supply; recommended maximum VIN is 15 V, with an absolute maximum of 18 V, and VIN must exceed VOUT by at least 1.5 V for regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-252 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage (row 1, 25°C window) | VREF | 1.238 | 1.25 | 1.262 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Reference Voltage (row 2, full temperature range) | VREF | 1.225 | 1.25 | 1.275 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Line Regulation (row 1) | VRLINE | 0.001 | 0.1 | % | 1.5V ≤ VIN-VOUT ≤ 10V | 3 | |
| Line Regulation (row 2, full temperature range) | VRLINE | 0.2 | % | 1.5V ≤ VIN-VOUT ≤ 10V | 3 | ||
| Load Regulation | VRLOAD | 0.4 | 1 | % | VIN = VOUT+2V, 1mA ≤ IOUT ≤ 1A | 3 | |
| Dropout Voltage (TO252-2) | VDROP | 1.3 | 1.4 | V | ΔVREF = 1%, IOUT = 0.8A | 3 | |
| Current Limit | ILIMIT | 1 | 1.35 | A | 3 | ||
| Adjust Pin Current | 60 | 120 | µA | 3 | |||
| Adjust Pin Current Change | 0.2 | 5 | µA | 1.5 ≤ (VIN-VOUT) ≤ 10V | 3 | ||
| Minimum Load Current | 1.7 | 5 | mA | 1.5 ≤ (VIN-VOUT) ≤ 10V | 3 | ||
| Input Voltage (absolute maximum) | VIN | 18 | V | 3 | |||
| Operating Junction Temperature Range (absolute maximum) | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature (soldering) | TLEAD | 260 | °C | Soldering, 10sec | 3 | ||
| Input Voltage (recommended operating) | VIN | 15 | V | 3 | |||
| Operating Junction Temperature Range (recommended) | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance Junction-to-Ambient, without heatsink (TO252-2) | θJA | 100 | °C/W | Without heatsink | 3 | ||
| Thermal Resistance Junction-to-Ambient, with heatsink (TO252-2) | θJA | 70 | °C/W | With heatsink (Note 6) | 3 | ||
| Thermal Resistance Junction-to-Case (TO252-2) | θJC | 10 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 16 |
CAD (KiCad official)
- Symbol:
AZ1117ID-ADJTRG1 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252 (KiCad packages3D, STEP)
- 3D model files:
az1117id-adjtrg1-etched.step/az1117id-adjtrg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);az1117id-adjtrg1.step/az1117id-adjtrg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
48934059d42aa84f, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AZ1117ID-ADJTRG1
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
AZ1117ID-ADJTRG1 from Diodes Incorporated, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Adjust pin of the ADJ version, which sources about 60 µA typical (120 µA max) into the reference divider; it serves as GND on the fixed-output versions. |
| 2 | OUTPUT | power_out | Regulated output; a minimum 10 µF output capacitor is required, with ESR below 20 Ω. |
| 3 | INPUT | power_in | Unregulated input supply; recommended maximum VIN is 15 V, with an absolute maximum of 18 V, and VIN must exceed VOUT by at least 1.5 V for regulation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-252 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage (row 1, 25°C window) | VREF | 1.238 | 1.25 | 1.262 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Reference Voltage (row 2, full temperature range) | VREF | 1.225 | 1.25 | 1.275 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Line Regulation (row 1) | VRLINE | | 0.001 | 0.1 | % | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Line Regulation (row 2, full temperature range) | VRLINE | | | 0.2 | % | 1.5V ≤ VIN-VOUT ≤ 10V | 3 |
| Load Regulation | VRLOAD | | 0.4 | 1 | % | VIN = VOUT+2V, 1mA ≤ IOUT ≤ 1A | 3 |
| Dropout Voltage (TO252-2) | VDROP | | 1.3 | 1.4 | V | ΔVREF = 1%, IOUT = 0.8A | 3 |
| Current Limit | ILIMIT | 1 | 1.35 | | A | | 3 |
| Adjust Pin Current | | | 60 | 120 | µA | | 3 |
| Adjust Pin Current Change | | | 0.2 | 5 | µA | 1.5 ≤ (VIN-VOUT) ≤ 10V | 3 |
| Minimum Load Current | | | 1.7 | 5 | mA | 1.5 ≤ (VIN-VOUT) ≤ 10V | 3 |
| Input Voltage (absolute maximum) | VIN | | | 18 | V | | 3 |
| Operating Junction Temperature Range (absolute maximum) | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10sec | 3 |
| Input Voltage (recommended operating) | VIN | | | 15 | V | | 3 |
| Operating Junction Temperature Range (recommended) | TJ | -40 | | 125 | °C | | 3 |
| Thermal Resistance Junction-to-Ambient, without heatsink (TO252-2) | θJA | | 100 | | °C/W | Without heatsink | 3 |
| Thermal Resistance Junction-to-Ambient, with heatsink (TO252-2) | θJA | | 70 | | °C/W | With heatsink (Note 6) | 3 |
| Thermal Resistance Junction-to-Case (TO252-2) | θJC | | 10 | | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 16 |
## CAD (KiCad official)
- Symbol: `AZ1117ID-ADJTRG1`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: TO-252 (KiCad packages3D, STEP)
- 3D model files: `az1117id-adjtrg1-etched.step` / `az1117id-adjtrg1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `az1117id-adjtrg1.step` / `az1117id-adjtrg1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8597553966313836544) (17 pp, sha256 `48934059d42aa84f`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/az1117id-adjtrg1-datasheet.pdf)