component
AZ1117CR-5.0TRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AZ1117CR-5.0TRG1
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
AZ1117CR-5.0TRG1 from Diodes Incorporated, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Adjust/ground pin: for the fixed 5.0V version it is connected to GND (A1 and A2 shorted, B open), and the datasheet gives an adjust pin current of 60 µA typical and 120 µA maximum. |
| 2 | OUTPUT | power_out | Regulated 5.0V output; the datasheet requires a minimum 10 µF output capacitor with ESR less than 20 Ω, and the part delivers a current limit of 1.35 A typical (1 A minimum). |
| 3 | INPUT | power_in | Unregulated input supply; recommended VIN maximum is 15 V and the absolute maximum input voltage is 18 V, with VIN required to be at least VOUT + 1.5 V for regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.95 | 5 | 5.05 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Output Voltage (over junction temperature) | VOUT | 4.9 | 5 | 5.1 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Line Regulation | VRLINE | 0.5 | 6 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 | |
| Line Regulation (over junction temperature) | VRLINE | 10 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 | ||
| Load Regulation | VRLOAD | 2 | 15 | mV | 7 | ||
| Current Limit | ILIMIT | 1 | 1.35 | A | 7 | ||
| Quiescent Current | IQ | 4 | 6 | mA | IOUT = 0 | 7 | |
| Input Voltage | VIN | 18 | V | 4 | |||
| Operating Junction Temperature Range | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Thermal Resistance Junction to Ambient (without heatsink), SOT89 | θJA | 170 | °C/W | Without heatsink | 4 | ||
| Thermal Resistance Junction to Ambient (with heatsink), SOT89 | θJA | 150 | °C/W | With heatsink (Note 6) | 4 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 260 | °C | Soldering, 10 sec | 4 | ||
| ESD (Human Body Model) | 4000 | V | Human Body Model | 4 | |||
| Input Voltage (recommended) | VIN | 15 | V | 4 | |||
| Operating Junction Temperature Range (recommended) | TJ | -20 | 125 | °C | 4 | ||
| Thermal Resistance Junction to Case, SOT89 | θJC | 30 | °C/W | Junction to case | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | , ESD (Human Body Model) 4000 V Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and | 4 | |
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 23 |
CAD (KiCad official)
- Symbol:
AZ1117CR-5.0TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
az1117cr-5-0trg1-etched.step/az1117cr-5-0trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);az1117cr-5-0trg1.step/az1117cr-5-0trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (24 pp, sha256
8333717aa7b5f90f, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AZ1117CR-5.0TRG1
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
AZ1117CR-5.0TRG1 from Diodes Incorporated, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Adjust/ground pin: for the fixed 5.0V version it is connected to GND (A1 and A2 shorted, B open), and the datasheet gives an adjust pin current of 60 µA typical and 120 µA maximum. |
| 2 | OUTPUT | power_out | Regulated 5.0V output; the datasheet requires a minimum 10 µF output capacitor with ESR less than 20 Ω, and the part delivers a current limit of 1.35 A typical (1 A minimum). |
| 3 | INPUT | power_in | Unregulated input supply; recommended VIN maximum is 15 V and the absolute maximum input voltage is 18 V, with VIN required to be at least VOUT + 1.5 V for regulation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.95 | 5 | 5.05 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Output Voltage (over junction temperature) | VOUT | 4.9 | 5 | 5.1 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Line Regulation | VRLINE | | 0.5 | 6 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Line Regulation (over junction temperature) | VRLINE | | | 10 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Load Regulation | VRLOAD | | 2 | 15 | mV | | 7 |
| Current Limit | ILIMIT | 1 | 1.35 | | A | | 7 |
| Quiescent Current | IQ | | 4 | 6 | mA | IOUT = 0 | 7 |
| Input Voltage | VIN | | | 18 | V | | 4 |
| Operating Junction Temperature Range | TJ | | | 150 | °C | | 4 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 4 |
| Thermal Resistance Junction to Ambient (without heatsink), SOT89 | θJA | | 170 | | °C/W | Without heatsink | 4 |
| Thermal Resistance Junction to Ambient (with heatsink), SOT89 | θJA | | 150 | | °C/W | With heatsink (Note 6) | 4 |
| Lead Temperature (Soldering, 10 sec) | TLEAD | | | 260 | °C | Soldering, 10 sec | 4 |
| ESD (Human Body Model) | | | | 4000 | V | Human Body Model | 4 |
| Input Voltage (recommended) | VIN | | | 15 | V | | 4 |
| Operating Junction Temperature Range (recommended) | TJ | -20 | | 125 | °C | | 4 |
| Thermal Resistance Junction to Case, SOT89 | θJC | | 30 | | °C/W | Junction to case | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | |, ESD (Human Body Model) 4000 V Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and | 4 |
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 23 |
## CAD (KiCad official)
- Symbol: `AZ1117CR-5.0TRG1`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files: `az1117cr-5-0trg1-etched.step` / `az1117cr-5-0trg1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `az1117cr-5-0trg1.step` / `az1117cr-5-0trg1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835078550654976) (24 pp, sha256 `8333717aa7b5f90f`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/az1117cr-5-0trg1-datasheet.pdf)