component
AZ1117CH2-3.3TRG1
Public Made by Adomby adom
Diodes Incorporated Dropout Regulators(LDO), SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAZ1117CH2-3.3TRG1
Diodes Incorporated · Dropout Regulators(LDO) · SOT-223
AZ1117CH2-3.3TRG1 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Input voltage pin; the absolute maximum VIN is 18V and the recommended maximum input voltage is 15V. |
| 2 | ADJ/GND | power_in | Adjust/ground pin; adjust pin current is 60µA typical and 120µA maximum on the adjustable version, and it serves as GND on the fixed-output versions. |
| 3 | OUTPUT | power_out | Regulated output pin with output voltage accuracy of ±1% (except the 1.2V version) and a typical current limit of 1.35A; a minimum 10µF output capacitor is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.267 | 3.3 | 3.333 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Output Voltage (over junction temperature range -20°C to +125°C) | VOUT | 3.235 | 3.3 | 3.365 | V | 1.5V ≤ VIN-VOUT ≤ 10V | 7 |
| Line Regulation | VRLINE | 0.5 | 6 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 | |
| Line Regulation (over junction temperature range) | VRLINE | 10 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 7 | ||
| Load Regulation | VRLOAD | 2 | 15 | mV | 7 | ||
| Dropout Voltage (SOT223) | VDROP | 1.2 | 1.3 | V | ΔVOUT = 1%, IOUT = 0.8A | 7 | |
| Current Limit | ILIMIT | 1 | 1.35 | A | 7 | ||
| Quiescent Current | IQ | 4 | 6 | mA | IOUT = 0 | 7 | |
| Temperature Stability | 0.5 | % | 7 | ||||
| Input Voltage (recommended operating) | VIN | 15 | V | 4 | |||
| Operating Junction Temperature Range (recommended operating) | TJ | -20 | 125 | °C | 4 | ||
| Input Voltage (absolute maximum) | VIN | 18 | V | 4 | |||
| Operating Junction Temperature Range (absolute maximum) | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Lead Temperature (soldering, 10 sec) | TLEAD | 260 | °C | Soldering, 10 sec | 4 | ||
| ESD (Human Body Model) | 4000 | V | Human Body Model | 4 | |||
| RMS Output Noise (% of VOUT) | 0.003 | % | TA = +25ºC, 10Hz ≤ f ≤ 10kHz | 7 | |||
| Ripple Rejection (PSRR) | PSRR | 70 | dB | f = 120Hz, COUT = 22µF, (VIN-VOUT) = 3V, IOUT = 300mA | 7 | ||
| Thermal Shutdown Junction Temperature | 160 | °C | 7 | ||||
| Thermal Shutdown Hysteresis | 16 | °C | 7 | ||||
| Thermal Resistance Junction to Case (SOT223) | θJC | 15 | °C/W | Junction to Case | 7 | ||
| Thermal Resistance Junction to Ambient, without heatsink (SOT223) | θJA | 125 | °C/W | Without heatsink | 4 | ||
| Thermal Resistance Junction to Ambient, with heatsink (SOT223) | θJA | 100 | °C/W | With heatsink (Note 6) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | , ESD (Human Body Model) 4000 V Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and | 4 | |
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 23 |
CAD (KiCad official)
- Symbol:
AZ1117CH2-3.3TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
az1117ch2-3-3trg1-etched.step/az1117ch2-3-3trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);az1117ch2-3-3trg1.step/az1117ch2-3-3trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (24 pp, sha256
8333717aa7b5f90f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).