component

AZ1117CH-3.3TRG1

Public Made by Adom

by adom

Diodes Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicaz1117ch-3.3trg1
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs az1117ch-3-3trg1: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the pla… · Ray
viewers az1117ch-3-3trg1: footprint pads join the pin-hover bus with the symbol (4 pads) · Ray
az1117ch-3-3trg1-etched.fit.json az1117ch-3-3trg1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
az1117ch-3-3trg1-etched.glb az1117ch-3-3trg1: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the pla… · Ray
az1117ch-3-3trg1-etched.step az1117ch-3-3trg1: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the pla… · Ray
az1117ch-3-3trg1-hero.glb az1117ch-3-3trg1: hero from the plain model · Ray
az1117ch-3-3trg1-hero.overlay.json az1117ch-3-3trg1: hero from the plain model · Ray
az1117ch-3-3trg1.glb Publish 0.1.0 · Ray
az1117ch-3-3trg1.kicad_mod az1117ch-3-3trg1: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs… · Ray
az1117ch-3-3trg1.kicad_sym Publish 0.1.0 · Ray
az1117ch-3-3trg1.lbr az1117ch-3-3trg1: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs… · Ray
az1117ch-3-3trg1.step Publish 0.1.0 · Ray
package.json Publish 0.2.2 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.2 · Ray
README.md az1117ch-3-3trg1: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

AZ1117CH-3.3TRG1

Diodes · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223

AZ1117CH-3.3TRG1 from Diodes, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the regulator. Also acts as the ADJ pin on the adjustable version (AZ1117C-ADJ); for the -3.3V fixed variant this pin is tied internally to set the 3.3V output and is connected to system ground.
2 OUTPUT power_out Regulated 3.3V output (±1%). Requires a minimum 10µF low-ESR ceramic output capacitor (ESR < 20Ω) for stability. Supports up to 1.35A typical current limit with on-chip thermal shutdown at TJ ≈ +160°C.
3 INPUT power_in Unregulated input supply. Absolute maximum 18V; recommended operating maximum 15V. Dropout voltage is 1.2V typical (SOT223) at IOUT = 0.8A. A 10µF input capacitor is recommended.
4 VOUT (TAB) power_out Metal tab electrically connected to OUTPUT (pin 2). Provides the primary thermal path to the PCB copper pour; solder to the OUTPUT net and to a copper heatsink area to reduce θJA (SOT223 θJA = 125°C/W without heatsink, 100°C/W with heatsink).

Key specifications

Parameter Value
Manufacturer Diodes
Package SOT-223
Category PMIC
Pins 4

Ordering variants

  • AZ1117CH-3.3TRG1H
  • AZ1117CH-3.3TRG1H2
  • AZ1117CH-3.3TRG1R
  • AZ1117CH-3.3TRG1R2
  • AZ1117CH-3.3TRG1
  • AZ1117CH-3.3TRG1CJ

CAD (KiCad official)

  • Symbol: AZ1117CH-3.3TRG1
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)
  • 3D model files: az1117ch-3-3trg1-etched.step / az1117ch-3-3trg1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); az1117ch-3-3trg1.step / az1117ch-3-3trg1.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
az1117ch-3-3trg1.step 64 KB You want the bare part, or you mark your own boards.
az1117ch-3-3trg1-etched.step 2.2 MB You want the part with AZ1117CH-3.3TRG1 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 559 faces against 75 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes datasheet (24 pp, sha256 8333717aa7b5f90f, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF