component
AZ1117CH-2.5TRG1
Public Made by Adomby adom
Diodes Incorporated Linear Voltage Regulators (LDO), SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AZ1117CH-2.5TRG1
Diodes Incorporated · Linear Voltage Regulators (LDO) · SOT-223
AZ1117CH-2.5TRG1 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference (labelled ADJ/GND in the datasheet; for the fixed 2.5V version this pin is GND, as the adjust resistors are integrated). |
| 2 | OUTPUT | power_out | Regulated 2.5V output (±1%), requires a minimum 10µF output capacitor with ESR below 20Ω and delivers a current limit of 1.35A typical. |
| 3 | INPUT | power_in | Unregulated input voltage, recommended maximum 15V and absolute maximum 18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 2.475 | 2.5 | 2.525 | V | 1.5V ≤ VIN-VOUT ≤ 10V, IOUT = 10mA, TJ = +25°C | 6 |
| Output Voltage (over full junction temperature range) | VOUT | 2.455 | 2.5 | 2.545 | V | 1.5V ≤ VIN-VOUT ≤ 10V, TJ = -20°C to +125°C | 6 |
| Line Regulation | VRLINE | 0.5 | 6 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 6 | |
| Line Regulation (over full junction temperature range) | VRLINE | 10 | mV | 1.5V ≤ VIN-VOUT ≤ 10V, TJ = -20°C to +125°C | 6 | ||
| Load Regulation | VRLOAD | 2 | 15 | mV | 6 | ||
| Dropout Voltage SOT223 | VDROP | 1.2 | 1.3 | V | ∆VOUT = 1%, IOUT = 0.8A, SOT223 | 6 | |
| Current Limit | ILIMIT | 1 | 1.35 | A | 6 | ||
| Quiescent Current | IQ | 4 | 6 | mA | IOUT = 0 | 6 | |
| Ripple Rejection | PSRR | 70 | dB | f = 120Hz, COUT = 22µF, (VIN-VOUT) = 3V, IOUT = 300mA | 6 | ||
| Temperature Stability | 0.5 | % | 6 | ||||
| RMS Output Noise (% of VOUT) | 0.003 | % | TA = +25°C, 10Hz ≤ f ≤ 10kHz | 6 | |||
| Thermal Shutdown Junction Temperature | 160 | °C | 6 | ||||
| Thermal Shutdown Hysteresis | 16 | °C | 6 | ||||
| Thermal Resistance Junction to Case SOT223 | θJC | 15 | °C/W | SOT223 | 6 | ||
| Input Voltage | VIN | 18 | V | 4 | |||
| Operating Junction Temperature Range | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Lead Temperature | TLEAD | 260 | °C | Soldering, 10sec | 4 | ||
| ESD (Human Body Model) | 4000 | V | 4 | ||||
| Input Voltage | VIN | 15 | V | 4 | |||
| Operating Junction Temperature Range | TJ | -20 | 125 | °C | 4 | ||
| Thermal Resistance (Without Heatsink) SOT223 | θJA | 125 | °C/W | SOT223, without heatsink | 4 | ||
| Thermal Resistance (With Heatsink) SOT223 | θJA | 100 | °C/W | SOT223, with heatsink (Note 6) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | , ESD (Human Body Model) 4000 V Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and | 4 | |
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 23 |
CAD (KiCad official)
- Symbol:
AZ1117CH-2.5TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
az1117ch-2-5trg1-etched.step/az1117ch-2-5trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);az1117ch-2-5trg1.step/az1117ch-2-5trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (24 pp, sha256
8333717aa7b5f90f, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AZ1117CH-2.5TRG1
**Diodes Incorporated** · Linear Voltage Regulators (LDO) · SOT-223
AZ1117CH-2.5TRG1 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference (labelled ADJ/GND in the datasheet; for the fixed 2.5V version this pin is GND, as the adjust resistors are integrated). |
| 2 | OUTPUT | power_out | Regulated 2.5V output (±1%), requires a minimum 10µF output capacitor with ESR below 20Ω and delivers a current limit of 1.35A typical. |
| 3 | INPUT | power_in | Unregulated input voltage, recommended maximum 15V and absolute maximum 18V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management ICs |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 2.475 | 2.5 | 2.525 | V | 1.5V ≤ VIN-VOUT ≤ 10V, IOUT = 10mA, TJ = +25°C | 6 |
| Output Voltage (over full junction temperature range) | VOUT | 2.455 | 2.5 | 2.545 | V | 1.5V ≤ VIN-VOUT ≤ 10V, TJ = -20°C to +125°C | 6 |
| Line Regulation | VRLINE | | 0.5 | 6 | mV | 1.5V ≤ VIN-VOUT ≤ 10V | 6 |
| Line Regulation (over full junction temperature range) | VRLINE | | | 10 | mV | 1.5V ≤ VIN-VOUT ≤ 10V, TJ = -20°C to +125°C | 6 |
| Load Regulation | VRLOAD | | 2 | 15 | mV | | 6 |
| Dropout Voltage SOT223 | VDROP | | 1.2 | 1.3 | V | ∆VOUT = 1%, IOUT = 0.8A, SOT223 | 6 |
| Current Limit | ILIMIT | 1 | 1.35 | | A | | 6 |
| Quiescent Current | IQ | | 4 | 6 | mA | IOUT = 0 | 6 |
| Ripple Rejection | PSRR | | 70 | | dB | f = 120Hz, COUT = 22µF, (VIN-VOUT) = 3V, IOUT = 300mA | 6 |
| Temperature Stability | | | 0.5 | | % | | 6 |
| RMS Output Noise (% of VOUT) | | | 0.003 | | % | TA = +25°C, 10Hz ≤ f ≤ 10kHz | 6 |
| Thermal Shutdown Junction Temperature | | | 160 | | °C | | 6 |
| Thermal Shutdown Hysteresis | | | 16 | | °C | | 6 |
| Thermal Resistance Junction to Case SOT223 | θJC | | 15 | | °C/W | SOT223 | 6 |
| Input Voltage | VIN | | | 18 | V | | 4 |
| Operating Junction Temperature Range | TJ | | | 150 | °C | | 4 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 4 |
| Lead Temperature | TLEAD | | | 260 | °C | Soldering, 10sec | 4 |
| ESD (Human Body Model) | | | | 4000 | V | | 4 |
| Input Voltage | VIN | | | 15 | V | | 4 |
| Operating Junction Temperature Range | TJ | -20 | | 125 | °C | | 4 |
| Thermal Resistance (Without Heatsink) SOT223 | θJA | | 125 | | °C/W | SOT223, without heatsink | 4 |
| Thermal Resistance (With Heatsink) SOT223 | θJA | | 100 | | °C/W | SOT223, with heatsink (Note 6) | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | |, ESD (Human Body Model) 4000 V Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and | 4 |
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 23 |
## CAD (KiCad official)
- Symbol: `AZ1117CH-2.5TRG1`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `az1117ch-2-5trg1-etched.step` / `az1117ch-2-5trg1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `az1117ch-2-5trg1.step` / `az1117ch-2-5trg1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AZ1117CH-2.5TRG1.pdf) (24 pp, sha256 `8333717aa7b5f90f`, retrieved 2026-10-22, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/az1117ch-2-5trg1-datasheet.pdf)