component
ATTINY13V-10SSU
Public Made by Adomby adom
Microchip Tech Pre-ordered MCUs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownATTINY13V-10SSU
Microchip Tech · Pre-ordered MCUs · SOP-8
ATTINY13V-10SSU from Microchip Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB5 (PCINT5/RESET/ADC0/dW) | bidirectional | Port B bit 5 is a bidirectional I/O with selectable internal pull-up that doubles as RESET, where a low level longer than the minimum pulse length generates a reset. |
| 2 | PB3 | bidirectional | Port B bit 3 is a bidirectional I/O with selectable internal pull-up, with alternate functions CLKI, ADC3 and PCINT3. |
| 3 | PB4 | bidirectional | Port B bit 4 is a bidirectional I/O with selectable internal pull-up, with alternate functions ADC2 and PCINT4. |
| 4 | GND | power_in | Ground. |
| 5 | PB0 (MOSI/AIN0/OC0A/PCINT0) | bidirectional | Port B bit 0 is a bidirectional I/O with selectable internal pull-up, with alternate functions MOSI, AIN0, OC0A and PCINT0. |
| 6 | PB1 (MISO/AIN1/OC0B/INT0/PCINT1) | bidirectional | Port B bit 1 is a bidirectional I/O with selectable internal pull-up, with alternate functions MISO, AIN1, OC0B, INT0 and PCINT1. |
| 7 | PB2 (SCK/ADC1/T0/PCINT2) | bidirectional | Port B bit 2 is a bidirectional I/O with selectable internal pull-up, with alternate functions SCK, ADC1, T0 and PCINT2. |
| 8 | VCC | power_in | Digital supply voltage; the ATtiny13V operates from 1.8 to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 1.8 | 5.5 | V | ATtiny13V | 1 | |
| Speed grade frequency at 1.8-5.5 V | 0 | 4 | MHz | ATtiny13V, 1.8 - 5.5V | 1 | ||
| Speed grade frequency at 2.7-5.5 V | 0 | 10 | MHz | ATtiny13V, 2.7 - 5.5V | 1 | ||
| Operating temperature range | TA | -40 | 85 | °C | Industrial operation range | 11 | |
| Power-down mode supply current | 0.1 | µA | Power-down mode, 1.8V | 1 | |||
| EEPROM write supply voltage | VCC | 1.9 | V | EEPROM write, ATtiny13 Rev. D errata | 17 |
CAD (KiCad official)
- Symbol:
ATTINY13V-10SSU - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
attiny13v-10ssu-etched.step/attiny13v-10ssu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);attiny13v-10ssu.step/attiny13v-10ssu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
8f8a639097cb6f14, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).