component
ATMEGA32U4RC-AU
Public Made by Adomby adom
Microchip Tech MICROCHIP, TQFP-44(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownATMEGA32U4RC-AU
Microchip Tech · MICROCHIP · TQFP-44(10x10)
ATMEGA32U4RC-AU from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE6 | bidirectional | Port E bit 6 bidirectional I/O with internal pull-up, alternate functions INT6 and AIN0. |
| 2 | UVCC | power_in | USB pads internal regulator input supply voltage. |
| 3 | D- | bidirectional | USB full/low speed negative data line, to be connected to the USB D- connector pin with a serial 22 ohm resistor. |
| 4 | D+ | bidirectional | USB full/low speed positive data line, to be connected to the USB D+ connector pin with a serial 22 ohm resistor. |
| 5 | UGND | power_in | USB pads ground. |
| 6 | UCAP | passive | USB pads internal regulator output, to be connected to an external 1uF capacitor. |
| 7 | VBUS | power_in | USB VBUS monitor input. |
| 8 | PB0 | bidirectional | Port B bit 0 bidirectional I/O with internal pull-up, alternate functions SS and PCINT0. |
| 9 | PB1 | bidirectional | Port B bit 1 bidirectional I/O with internal pull-up, alternate functions PCINT1 and SCLK. |
| 10 | PB2 | bidirectional | Port B bit 2 bidirectional I/O with internal pull-up, alternate functions PDI, PCINT2 and MOSI. |
| 11 | PB3 | bidirectional | Port B bit 3 bidirectional I/O with internal pull-up, alternate functions PDO, PCINT3 and MISO. |
| 12 | PB7 | bidirectional | Port B bit 7 bidirectional I/O with internal pull-up, alternate functions PCINT7, OC0A, OC1C and RTS. |
| 13 | RESET | input | Active-low reset input; a low level longer than the minimum pulse length generates a reset even if the clock is not running. |
| 14 | VCC | power_in | Digital supply voltage. |
| 15 | GND | power_in | Ground. |
| 16 | XTAL2 | output | Output from the inverting oscillator amplifier. |
| 17 | XTAL1 | input | Input to the inverting oscillator amplifier and to the internal clock operating circuit. |
| 18 | PD0 | bidirectional | Port D bit 0 bidirectional I/O with internal pull-up, alternate functions OC0B, SCL and INT0. |
| 19 | PD1 | bidirectional | Port D bit 1 bidirectional I/O with internal pull-up, alternate functions SDA and INT1. |
| 20 | PD2 | bidirectional | Port D bit 2 bidirectional I/O with internal pull-up, alternate functions RXD1 and INT2. |
| 21 | PD3 | bidirectional | Port D bit 3 bidirectional I/O with internal pull-up, alternate functions TXD1 and INT3. |
| 22 | PD5 | bidirectional | Port D bit 5 bidirectional I/O with internal pull-up, alternate functions XCK1 and CTS. |
| 23 | GND | power_in | Ground. |
| 24 | AVCC | power_in | Supply voltage for the A/D converter channels; connect to VCC if the ADC is unused, otherwise to VCC through a low-pass filter. |
| 25 | PD4 | bidirectional | Port D bit 4 bidirectional I/O with internal pull-up, alternate functions ICP1 and ADC8. |
| 26 | PD6 | bidirectional | Port D bit 6 bidirectional I/O with internal pull-up, alternate functions T1, OC4D and ADC9. |
| 27 | PD7 | bidirectional | Port D bit 7 bidirectional I/O with internal pull-up, alternate functions T0, OC4D and ADC10. |
| 28 | PB4 | bidirectional | Port B bit 4 bidirectional I/O with internal pull-up, alternate functions PCINT4 and ADC11. |
| 29 | PB5 | bidirectional | Port B bit 5 bidirectional I/O with internal pull-up, alternate functions PCINT5, OC1A, OC4B and ADC12. |
| 30 | PB6 | bidirectional | Port B bit 6 bidirectional I/O with internal pull-up, alternate functions PCINT6, OC1B, OC4B and ADC13. |
| 31 | PC6 | bidirectional | Port C bit 6 bidirectional I/O with internal pull-up, alternate functions OC3A and OC4A. |
| 32 | PC7 | bidirectional | Port C bit 7 bidirectional I/O with internal pull-up, alternate functions ICP3, CLK0 and OC4A. |
| 33 | PE2 | bidirectional | Port E bit 2 bidirectional I/O with internal pull-up, alternate function HWB. |
| 34 | VCC | power_in | Digital supply voltage. |
| 35 | GND | power_in | Ground. |
| 36 | PF7 | bidirectional | Port F bit 7, ADC7 analog input or I/O, also JTAG TDI. |
| 37 | PF6 | bidirectional | Port F bit 6, ADC6 analog input or I/O, also JTAG TDO. |
| 38 | PF5 | bidirectional | Port F bit 5, ADC5 analog input or I/O, also JTAG TMS. |
| 39 | PF4 | bidirectional | Port F bit 4, ADC4 analog input or I/O, also JTAG TCK. |
| 40 | PF1 | bidirectional | Port F bit 1, ADC1 analog input or I/O. |
| 41 | PF0 | bidirectional | Port F bit 0, ADC0 analog input or I/O. |
| 42 | AREF | input | Analog reference input for the A/D converter. |
| 43 | GND | power_in | Ground. |
| 44 | AVCC | power_in | Supply voltage for the A/D converter channels; connect to VCC if the ADC is unused, otherwise to VCC through a low-pass filter. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (Ordering Information, Power Supply column) | 2.7 | 5.5 | V | ATmega32U4RC-AU, 44ML TQFP package, Ordering Information table | 17 | ||
| Operating temperature range (Operation Range, Industrial) | -40 | 85 | °C | ATmega32U4RC-AU, Industrial range, Ordering Information table | 17 | ||
| Speed grade (clock frequency) | 16 | MHz | ATmega32U4RC-AU, Speed column, Ordering Information table | 17 | |||
| USB operation from internal RC oscillator temperature range | 0 | 40 | °C | USB operation from internal RC oscillator is only guaranteed for this range (Ordering Information note 2; applies to the RC-AU variant) | 17 |
CAD (KiCad official)
- Symbol:
ATMEGA32U4RC-AU - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
atmega32u4rc-au-etched.step/atmega32u4rc-au-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);atmega32u4rc-au.step/atmega32u4rc-au.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (27 pp, sha256
65cd582b7eceee5f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).