component
ATMEGA328P-AUR
Public Made by Adomby adom
Microchip Tech Microcontrollers (MCU/MPU/SOC), TQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ATMEGA328P-AUR
Microchip Tech · Microcontrollers (MCU/MPU/SOC) · TQFP-32(7x7)
ATMEGA328P-AUR from Microchip Tech, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD3 | bidirectional | Port D bit 3 is a bi-directional I/O pin with internal pull-up, also usable as INT1 external interrupt, OC2B Timer/Counter2 compare output, or PCINT19. |
| 2 | PD4 | bidirectional | Port D bit 4 is a bi-directional I/O pin with internal pull-up, also usable as XCK USART external clock, T0 Timer/Counter0 external counter input, or PCINT20. |
| 3 | GND | power_in | Ground. |
| 4 | VCC | power_in | Digital supply voltage; the device operating voltage is stated as 1.8 to 5.5 V. |
| 5 | GND | power_in | Ground. |
| 6 | VCC | power_in | Digital supply voltage; the device operating voltage is stated as 1.8 to 5.5 V. |
| 7 | PB6 | input | Port B bit 6 doubles as XTAL1/TOSC1: depending on clock fuse settings it is the input to the inverting oscillator amplifier and to the internal clock circuit, and it can also serve as PCINT6. |
| 8 | PB7 | output | Port B bit 7 doubles as XTAL2/TOSC2: depending on clock fuse settings it is the output of the inverting oscillator amplifier, and it can also serve as PCINT7. |
| 9 | PD5 | bidirectional | Port D bit 5 is a bi-directional I/O pin with internal pull-up, also usable as T1 Timer/Counter1 external counter input, OC0B Timer/Counter0 compare output, or PCINT21. |
| 10 | PD6 | bidirectional | Port D bit 6 is a bi-directional I/O pin with internal pull-up, also usable as AIN0 analog comparator positive input (pull-up should be switched off in that use), OC0A compare output, or PCINT22. |
| 11 | PD7 | bidirectional | Port D bit 7 is a bi-directional I/O pin with internal pull-up, also usable as AIN1 analog comparator negative input (pull-up should be switched off in that use) or PCINT23. |
| 12 | PB0 | bidirectional | Port B bit 0 is a bi-directional I/O pin with internal pull-up, also usable as ICP1 Timer/Counter1 input capture input, CLKO divided system clock output, or PCINT0. |
| 13 | PB1 | bidirectional | Port B bit 1 is a bi-directional I/O pin with internal pull-up, also usable as OC1A Timer/Counter1 compare match A output or PCINT1. |
| 14 | PB2 | bidirectional | Port B bit 2 is a bi-directional I/O pin with internal pull-up, also usable as SS SPI slave select, OC1B Timer/Counter1 compare match B output, or PCINT2. |
| 15 | PB3 | bidirectional | Port B bit 3 is a bi-directional I/O pin with internal pull-up, also usable as MOSI SPI data line, OC2A Timer/Counter2 compare match A output, or PCINT3. |
| 16 | PB4 | bidirectional | Port B bit 4 is a bi-directional I/O pin with internal pull-up, also usable as MISO SPI data line or PCINT4. |
| 17 | PB5 | bidirectional | Port B bit 5 is a bi-directional I/O pin with internal pull-up, also usable as SCK SPI clock or PCINT5. |
| 18 | AVCC | power_in | Supply voltage pin for the A/D converter, PC3:0 and ADC7:6; it should be connected to VCC even if the ADC is not used, and through a low-pass filter if the ADC is used. |
| 19 | ADC6 | input | Analog input channel 6 of the 10-bit A/D converter (TQFP and VQFN packages only), powered from the analog supply. |
| 20 | AREF | input | Analog reference pin for the A/D converter. |
| 21 | GND | power_in | Ground. |
| 22 | ADC7 | input | Analog input channel 7 of the 10-bit A/D converter (TQFP and VQFN packages only), powered from the analog supply. |
| 23 | PC0 | bidirectional | Port C bit 0 is a 7-bit bi-directional I/O pin with internal pull-up, also usable as ADC0 analog input (analog power) or PCINT8. |
| 24 | PC1 | bidirectional | Port C bit 1 is a bi-directional I/O pin with internal pull-up, also usable as ADC1 analog input (analog power) or PCINT9. |
| 25 | PC2 | bidirectional | Port C bit 2 is a bi-directional I/O pin with internal pull-up, also usable as ADC2 analog input (analog power) or PCINT10. |
| 26 | PC3 | bidirectional | Port C bit 3 is a bi-directional I/O pin with internal pull-up, also usable as ADC3 analog input (analog power) or PCINT11. |
| 27 | PC4 | bidirectional | Port C bit 4 is a bi-directional I/O pin with internal pull-up, also usable as SDA 2-wire serial data I/O, ADC4 analog input (digital power) or PCINT12. |
| 28 | PC5 | bidirectional | Port C bit 5 is a bi-directional I/O pin with internal pull-up, also usable as SCL 2-wire serial clock, ADC5 analog input (digital power) or PCINT13. |
| 29 | PC6 | bidirectional | PC6 is an I/O pin when the RSTDISBL fuse is programmed; when the RSTDISBL fuse is unprogrammed it is the Reset input, and a low level longer than the minimum pulse length generates a Reset (also usable as PCINT14). |
| 30 | PD0 | bidirectional | Port D bit 0 is a bi-directional I/O pin with internal pull-up, and is the RXD USART receive data input when the USART receiver is enabled, or PCINT16. |
| 31 | PD1 | bidirectional | Port D bit 1 is a bi-directional I/O pin with internal pull-up, and is the TXD USART transmit data output when the USART transmitter is enabled, or PCINT17. |
| 32 | PD2 | bidirectional | Port D bit 2 is a bi-directional I/O pin with internal pull-up, also usable as INT0 external interrupt source 0 or PCINT18. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on RESET with respect to Ground | -0.5 | 13 | V | 308 | |||
| Voltage on any pin except RESET with respect to Ground | -0.5 | V | 308 | ||||
| DC Current per I/O Pin | 40 | mA | 308 | ||||
| DC Current VCC and GND Pins | 200 | mA | 308 | ||||
| Operating Temperature | -55 | 125 | °C | 308 | |||
| Storage Temperature | -65 | 150 | °C | 308 | |||
| Power Supply Voltage (VCC) | VCC | 1.8 | 5.5 | V | TA = -40°C to 85°C, VCC = 1.8V to 5.5V (table header) | 312 | |
| Operating Temperature (Industrial range) | -40 | 85 | °C | Operational Range Industrial, ATmega328P-AUR ordering code | 635 | ||
| Speed (maximum clock frequency) | 20 | MHz | Ordering table speed, Power Supply 1.8-5.5 V; max frequency depends on VCC per Figure 29-1 | 635 | |||
| Power Supply Current, Active mode | ICC | 0.3 | 0.5 | mA | Active 1MHz, VCC = 2V | 312 | |
| Power Supply Current, Active mode | ICC | 1.7 | 2.5 | mA | Active 4MHz, VCC = 3V | 312 | |
| Power Supply Current, Active mode | ICC | 5.2 | 9 | mA | Active 8MHz, VCC = 5V | 312 | |
| Power Supply Current, Idle mode | ICC | 0.04 | 0.15 | mA | Idle 1MHz, VCC = 2V | 312 | |
| Power Supply Current, Idle mode | ICC | 0.3 | 0.7 | mA | Idle 4MHz, VCC = 3V | 312 | |
| Power Supply Current, Idle mode | ICC | 1.2 | 2.7 | mA | Idle 8MHz, VCC = 5V | 312 | |
| Power Supply Current, Power-down mode (WDT enabled) | ICC | 4.2 | 8 | µA | WDT enabled, VCC = 3V | 312 | |
| Power Supply Current, Power-down mode (WDT disabled) | ICC | 0.1 | 2 | µA | WDT disabled, VCC = 3V | 312 | |
| Power Supply Current, Power-save mode | ICC | 0.8 | µA | 32kHz TOSC enabled, VCC = 1.8V | 312 | ||
| Power Supply Current, Power-save mode | ICC | 0.9 | µA | 32kHz TOSC enabled, VCC = 3V | 312 |
CAD (KiCad official)
- Symbol:
ATMEGA328P-AUR - Footprint:
Package_QFP:TQFP-32_7x7mm_P0.8mm - 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
atmega328p-aur-etched.step/atmega328p-aur-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);atmega328p-aur.step/atmega328p-aur.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (653 pp, sha256
c1d39de244c3b63b, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ATMEGA328P-AUR
**Microchip Tech** · Microcontrollers (MCU/MPU/SOC) · TQFP-32(7x7)
ATMEGA328P-AUR from Microchip Tech, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD3 | bidirectional | Port D bit 3 is a bi-directional I/O pin with internal pull-up, also usable as INT1 external interrupt, OC2B Timer/Counter2 compare output, or PCINT19. |
| 2 | PD4 | bidirectional | Port D bit 4 is a bi-directional I/O pin with internal pull-up, also usable as XCK USART external clock, T0 Timer/Counter0 external counter input, or PCINT20. |
| 3 | GND | power_in | Ground. |
| 4 | VCC | power_in | Digital supply voltage; the device operating voltage is stated as 1.8 to 5.5 V. |
| 5 | GND | power_in | Ground. |
| 6 | VCC | power_in | Digital supply voltage; the device operating voltage is stated as 1.8 to 5.5 V. |
| 7 | PB6 | input | Port B bit 6 doubles as XTAL1/TOSC1: depending on clock fuse settings it is the input to the inverting oscillator amplifier and to the internal clock circuit, and it can also serve as PCINT6. |
| 8 | PB7 | output | Port B bit 7 doubles as XTAL2/TOSC2: depending on clock fuse settings it is the output of the inverting oscillator amplifier, and it can also serve as PCINT7. |
| 9 | PD5 | bidirectional | Port D bit 5 is a bi-directional I/O pin with internal pull-up, also usable as T1 Timer/Counter1 external counter input, OC0B Timer/Counter0 compare output, or PCINT21. |
| 10 | PD6 | bidirectional | Port D bit 6 is a bi-directional I/O pin with internal pull-up, also usable as AIN0 analog comparator positive input (pull-up should be switched off in that use), OC0A compare output, or PCINT22. |
| 11 | PD7 | bidirectional | Port D bit 7 is a bi-directional I/O pin with internal pull-up, also usable as AIN1 analog comparator negative input (pull-up should be switched off in that use) or PCINT23. |
| 12 | PB0 | bidirectional | Port B bit 0 is a bi-directional I/O pin with internal pull-up, also usable as ICP1 Timer/Counter1 input capture input, CLKO divided system clock output, or PCINT0. |
| 13 | PB1 | bidirectional | Port B bit 1 is a bi-directional I/O pin with internal pull-up, also usable as OC1A Timer/Counter1 compare match A output or PCINT1. |
| 14 | PB2 | bidirectional | Port B bit 2 is a bi-directional I/O pin with internal pull-up, also usable as SS SPI slave select, OC1B Timer/Counter1 compare match B output, or PCINT2. |
| 15 | PB3 | bidirectional | Port B bit 3 is a bi-directional I/O pin with internal pull-up, also usable as MOSI SPI data line, OC2A Timer/Counter2 compare match A output, or PCINT3. |
| 16 | PB4 | bidirectional | Port B bit 4 is a bi-directional I/O pin with internal pull-up, also usable as MISO SPI data line or PCINT4. |
| 17 | PB5 | bidirectional | Port B bit 5 is a bi-directional I/O pin with internal pull-up, also usable as SCK SPI clock or PCINT5. |
| 18 | AVCC | power_in | Supply voltage pin for the A/D converter, PC3:0 and ADC7:6; it should be connected to VCC even if the ADC is not used, and through a low-pass filter if the ADC is used. |
| 19 | ADC6 | input | Analog input channel 6 of the 10-bit A/D converter (TQFP and VQFN packages only), powered from the analog supply. |
| 20 | AREF | input | Analog reference pin for the A/D converter. |
| 21 | GND | power_in | Ground. |
| 22 | ADC7 | input | Analog input channel 7 of the 10-bit A/D converter (TQFP and VQFN packages only), powered from the analog supply. |
| 23 | PC0 | bidirectional | Port C bit 0 is a 7-bit bi-directional I/O pin with internal pull-up, also usable as ADC0 analog input (analog power) or PCINT8. |
| 24 | PC1 | bidirectional | Port C bit 1 is a bi-directional I/O pin with internal pull-up, also usable as ADC1 analog input (analog power) or PCINT9. |
| 25 | PC2 | bidirectional | Port C bit 2 is a bi-directional I/O pin with internal pull-up, also usable as ADC2 analog input (analog power) or PCINT10. |
| 26 | PC3 | bidirectional | Port C bit 3 is a bi-directional I/O pin with internal pull-up, also usable as ADC3 analog input (analog power) or PCINT11. |
| 27 | PC4 | bidirectional | Port C bit 4 is a bi-directional I/O pin with internal pull-up, also usable as SDA 2-wire serial data I/O, ADC4 analog input (digital power) or PCINT12. |
| 28 | PC5 | bidirectional | Port C bit 5 is a bi-directional I/O pin with internal pull-up, also usable as SCL 2-wire serial clock, ADC5 analog input (digital power) or PCINT13. |
| 29 | PC6 | bidirectional | PC6 is an I/O pin when the RSTDISBL fuse is programmed; when the RSTDISBL fuse is unprogrammed it is the Reset input, and a low level longer than the minimum pulse length generates a Reset (also usable as PCINT14). |
| 30 | PD0 | bidirectional | Port D bit 0 is a bi-directional I/O pin with internal pull-up, and is the RXD USART receive data input when the USART receiver is enabled, or PCINT16. |
| 31 | PD1 | bidirectional | Port D bit 1 is a bi-directional I/O pin with internal pull-up, and is the TXD USART transmit data output when the USART transmitter is enabled, or PCINT17. |
| 32 | PD2 | bidirectional | Port D bit 2 is a bi-directional I/O pin with internal pull-up, also usable as INT0 external interrupt source 0 or PCINT18. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on RESET with respect to Ground | | -0.5 | | 13 | V | | 308 |
| Voltage on any pin except RESET with respect to Ground | | -0.5 | | | V | | 308 |
| DC Current per I/O Pin | | | | 40 | mA | | 308 |
| DC Current VCC and GND Pins | | | | 200 | mA | | 308 |
| Operating Temperature | | -55 | | 125 | °C | | 308 |
| Storage Temperature | | -65 | | 150 | °C | | 308 |
| Power Supply Voltage (VCC) | VCC | 1.8 | | 5.5 | V | TA = -40°C to 85°C, VCC = 1.8V to 5.5V (table header) | 312 |
| Operating Temperature (Industrial range) | | -40 | | 85 | °C | Operational Range Industrial, ATmega328P-AUR ordering code | 635 |
| Speed (maximum clock frequency) | | | | 20 | MHz | Ordering table speed, Power Supply 1.8-5.5 V; max frequency depends on VCC per Figure 29-1 | 635 |
| Power Supply Current, Active mode | ICC | | 0.3 | 0.5 | mA | Active 1MHz, VCC = 2V | 312 |
| Power Supply Current, Active mode | ICC | | 1.7 | 2.5 | mA | Active 4MHz, VCC = 3V | 312 |
| Power Supply Current, Active mode | ICC | | 5.2 | 9 | mA | Active 8MHz, VCC = 5V | 312 |
| Power Supply Current, Idle mode | ICC | | 0.04 | 0.15 | mA | Idle 1MHz, VCC = 2V | 312 |
| Power Supply Current, Idle mode | ICC | | 0.3 | 0.7 | mA | Idle 4MHz, VCC = 3V | 312 |
| Power Supply Current, Idle mode | ICC | | 1.2 | 2.7 | mA | Idle 8MHz, VCC = 5V | 312 |
| Power Supply Current, Power-down mode (WDT enabled) | ICC | | 4.2 | 8 | µA | WDT enabled, VCC = 3V | 312 |
| Power Supply Current, Power-down mode (WDT disabled) | ICC | | 0.1 | 2 | µA | WDT disabled, VCC = 3V | 312 |
| Power Supply Current, Power-save mode | ICC | | 0.8 | | µA | 32kHz TOSC enabled, VCC = 1.8V | 312 |
| Power Supply Current, Power-save mode | ICC | | 0.9 | | µA | 32kHz TOSC enabled, VCC = 3V | 312 |
## CAD (KiCad official)
- Symbol: `ATMEGA328P-AUR`
- Footprint: `Package_QFP:TQFP-32_7x7mm_P0.8mm`
- 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `atmega328p-aur-etched.step` / `atmega328p-aur-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `atmega328p-aur.step` / `atmega328p-aur.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586207760018493440) (653 pp, sha256 `c1d39de244c3b63b`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/atmega328p-aur-datasheet.pdf)