component
ATMEGA164A-AU
Public Made by Adomby adom
Microchip Tech Microcontrollers (MCU/MPU/SOC), TQFP-44(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownATMEGA164A-AU
Microchip Tech · Microcontrollers (MCU/MPU/SOC) · TQFP-44(10x10)
ATMEGA164A-AU from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB5 | bidirectional | Port B bit 5 I/O with internal pull-up; alternate functions MOSI, ICP3, PCINT13. |
| 2 | PB6 | bidirectional | Port B bit 6 I/O with internal pull-up; alternate functions MISO, OC3A, PCINT14. |
| 3 | PB7 | bidirectional | Port B bit 7 I/O with internal pull-up; alternate functions SCK, OC3B, PCINT15. |
| 4 | RESET | input | Active-low reset input; a low level longer than the minimum pulse length generates a reset even if the clock is not running. |
| 5 | VCC | power_in | Digital supply voltage. |
| 6 | GND | power_in | Ground. |
| 7 | XTAL2 | output | Output from the inverting oscillator amplifier. |
| 8 | XTAL1 | input | Input to the inverting oscillator amplifier and input to the internal clock operating circuit. |
| 9 | PD0 | bidirectional | Port D bit 0 I/O with internal pull-up; alternate functions RXD0, PCINT24 (T3 only on ATmega1284/1284P). |
| 10 | PD1 | bidirectional | Port D bit 1 I/O with internal pull-up; alternate functions TXD0, PCINT25. |
| 11 | PD2 | bidirectional | Port D bit 2 I/O with internal pull-up; alternate functions RXD1, INT0, PCINT26. |
| 12 | PD3 | bidirectional | Port D bit 3 I/O with internal pull-up; alternate functions TXD1, INT1, PCINT27. |
| 13 | PD4 | bidirectional | Port D bit 4 I/O with internal pull-up; alternate functions XCK1, OC1B, PCINT28. |
| 14 | PD5 | bidirectional | Port D bit 5 I/O with internal pull-up; alternate functions OC1A, PCINT29. |
| 15 | PD6 | bidirectional | Port D bit 6 I/O with internal pull-up; alternate functions OC2B, ICP1, PCINT30. |
| 16 | PD7 | bidirectional | Port D bit 7 I/O with internal pull-up; alternate functions OC2A, PCINT31. |
| 17 | VCC | power_in | Digital supply voltage. |
| 18 | GND | power_in | Ground. |
| 19 | PC0 | bidirectional | Port C bit 0 I/O with internal pull-up; alternate functions SCL (TWI), PCINT16. |
| 20 | PC1 | bidirectional | Port C bit 1 I/O with internal pull-up; alternate functions SDA (TWI), PCINT17. |
| 21 | PC2 | bidirectional | Port C bit 2 I/O with internal pull-up; alternate functions TCK (JTAG), PCINT18. |
| 22 | PC3 | bidirectional | Port C bit 3 I/O with internal pull-up; alternate functions TMS (JTAG), PCINT19. |
| 23 | PC4 | bidirectional | Port C bit 4 I/O with internal pull-up; alternate functions TDO (JTAG), PCINT20. |
| 24 | PC5 | bidirectional | Port C bit 5 I/O with internal pull-up; alternate functions TDI (JTAG), PCINT21. |
| 25 | PC6 | bidirectional | Port C bit 6 I/O with internal pull-up; alternate functions TOSC1 (Timer/Counter2 oscillator), PCINT22. |
| 26 | PC7 | bidirectional | Port C bit 7 I/O with internal pull-up; alternate functions TOSC2 (Timer/Counter2 oscillator), PCINT23. |
| 27 | AVCC | power_in | Supply voltage for Port A and the ADC; must be connected to VCC even if the ADC is unused, through a low-pass filter if the ADC is used. |
| 28 | GND | power_in | Ground. |
| 29 | AREF | input | Analog reference pin for the analog-to-digital converter. |
| 30 | PA7 | bidirectional | Port A bit 7 I/O with internal pull-up; ADC7 analog input, PCINT7. |
| 31 | PA6 | bidirectional | Port A bit 6 I/O with internal pull-up; ADC6 analog input, PCINT6. |
| 32 | PA5 | bidirectional | Port A bit 5 I/O with internal pull-up; ADC5 analog input, PCINT5. |
| 33 | PA4 | bidirectional | Port A bit 4 I/O with internal pull-up; ADC4 analog input, PCINT4. |
| 34 | PA3 | bidirectional | Port A bit 3 I/O with internal pull-up; ADC3 analog input, PCINT3. |
| 35 | PA2 | bidirectional | Port A bit 2 I/O with internal pull-up; ADC2 analog input, PCINT2. |
| 36 | PA1 | bidirectional | Port A bit 1 I/O with internal pull-up; ADC1 analog input, PCINT1. |
| 37 | PA0 | bidirectional | Port A bit 0 I/O with internal pull-up; ADC0 analog input, PCINT0. |
| 38 | VCC | power_in | Digital supply voltage. |
| 39 | GND | power_in | Ground. |
| 40 | PB0 | bidirectional | Port B bit 0 I/O with internal pull-up; alternate functions XCK0, T0, PCINT8. |
| 41 | PB1 | bidirectional | Port B bit 1 I/O with internal pull-up; alternate functions CLKO, T1, PCINT9. |
| 42 | PB2 | bidirectional | Port B bit 2 I/O with internal pull-up; alternate functions AIN0, INT2, PCINT10. |
| 43 | PB3 | bidirectional | Port B bit 3 I/O with internal pull-up; alternate functions AIN1, OC0A, PCINT11. |
| 44 | PB4 | bidirectional | Port B bit 4 I/O with internal pull-up; alternate functions SS, OC0B, PCINT12. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Low Voltage, except XTAL1 and RESET pin | VIL | -0.5 | V | VCC = 1.8V - 2.4V | 326 | ||
| Input Low Voltage, XTAL1 pin | VIL1 | -0.5 | V | VCC = 1.8V - 5.5V | 326 | ||
| Input Low Voltage, RESET pin | VIL2 | -0.5 | V | VCC = 1.8V - 5.5V | 326 | ||
| Output Low Voltage | VOL | 0.9 | V | IOL = 20mA, VCC = 5V | 326 | ||
| Output Low Voltage | VOL | 0.6 | V | IOL = 10mA, VCC = 3V | 326 | ||
| Output High Voltage | VOH | 4.2 | V | IOH = -20mA, VCC = 5V | 326 | ||
| Output High Voltage | VOH | 2.3 | V | IOH = -10mA, VCC = 3V | 326 | ||
| Input Leakage Current I/O Pin (absolute value) | IIL | 1 | µA | VCC = 5.5V, pin low | 326 | ||
| Reset Pull-up Resistor | RRST | 30 | 60 | kΩ | 326 | ||
| I/O Pin Pull-up Resistor | RPU | 20 | 50 | kΩ | 326 | ||
| Analog Comparator Input Offset Voltage | VACIO | 40 | mV | VCC = 5V, Vin = VCC/2 | 326 | ||
| Analog Comparator Input Offset Voltage | VACIO | 60 | mV | VCC < 3.6V, Vin < 0.5V | 327 | ||
| Analog Comparator Input Offset Voltage | VACIO | 500 | mV | VCC > 3.6V, Vin < 0.5V | 327 | ||
| Analog Comparator Input Leakage Current | IACLK | -50 | 50 | nA | VCC = 5V, Vin = VCC/2 | 327 | |
| Analog Comparator Propagation Delay | tACID | 750 | ns | VCC = 2.7V | 327 | ||
| Analog Comparator Propagation Delay | tACID | 500 | ns | VCC = 4.0V | 327 | ||
| Power Supply Current, Active mode | ICC | 0.3 | 0.55 | mA | Active 1MHz, VCC = 2V | 328 | |
| Power Supply Current, Active mode | ICC | 1.4 | 3.5 | mA | Active 4MHz, VCC = 3V | 328 | |
| Power Supply Current, Active mode | ICC | 4.8 | 12 | mA | Active 8MHz, VCC = 5V | 328 | |
| Power Supply Current, Idle mode | ICC | 0.07 | 0.5 | mA | Idle 1MHz, VCC = 2V | 328 | |
| Power Supply Current, Idle mode | ICC | 0.25 | 1.5 | mA | Idle 4MHz, VCC = 3V | 328 | |
| Power Supply Current, Idle mode | ICC | 1 | 5.5 | mA | Idle 8MHz, VCC = 5V | 328 | |
| Power Supply Current, Power-down mode | ICC | 5 | 15 | µA | Power-down mode, WDT enabled, VCC = 3V | 328 | |
| Power Supply Current, Power-down mode | ICC | 0.17 | 3 | µA | Power-down mode, WDT disabled, VCC = 3V | 328 | |
| Power Supply Current, Power-save mode | ICC | 0.5 | µA | Power-save mode, 32kHz TOSC enabled, VCC = 1.8V | 328 | ||
| Power Supply Current, Power-save mode | ICC | 0.6 | µA | Power-save mode, 32kHz TOSC enabled, VCC = 3V | 328 | ||
| Operating temperature | -55 | 125 | °C | 326 | |||
| Storage temperature | -65 | 150 | °C | 326 | |||
| Voltage on any pin except RESET with respect to ground | -0.5 | V | 326 | ||||
| Voltage on RESET with respect to ground | -0.5 | 13 | V | 326 | |||
| DC current per I/O pin | 40 | mA | 326 | ||||
| Operating supply voltage | VCC | 1.8 | 5.5 | V | TA = -40°C to 85°C | 326 | |
| Operating temperature range | TA | -40 | 85 | °C | 326 |
CAD (KiCad official)
- Symbol:
ATMEGA164A-AU - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
atmega164a-au-etched.step/atmega164a-au-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);atmega164a-au.step/atmega164a-au.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (672 pp, sha256
b5ee49362803dc70, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).