main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers atf1502as-10au44: viewers · Ray
atf1502as-10au44-etched.glb atf1502as-10au44: factory component page (tier=mfr) · Ray
atf1502as-10au44-etched.step atf1502as-10au44: factory component page (tier=mfr) · Ray
atf1502as-10au44-hero.glb atf1502as-10au44: hero GLB from the etched model (keeps the MPN mark) · Ray
atf1502as-10au44-hero.overlay.json atf1502as-10au44: hero GLB from the etched model (keeps the MPN mark) · Ray
atf1502as-10au44.glb Publish 0.1.0 · Ray
atf1502as-10au44.kicad_mod Publish 0.1.0 · Ray
atf1502as-10au44.kicad_sym Publish 0.1.0 · Ray
atf1502as-10au44.lbr Publish 0.1.0 · Ray
atf1502as-10au44.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 44 pins · Ray

ATF1502AS-10AU44

Microchip Tech · Programmable Logic Device (CPLDs/FPGAs) · TQFP-44(10x10)

ATF1502AS-10AU44 from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I/O/TDI bidirectional General-purpose I/O (macrocell 4) that doubles as the JTAG TDI input for boundary-scan and ISP, with an optional pull-up.
2 I/O bidirectional General-purpose I/O pin of macrocell 5 in logic block A.
3 I/O bidirectional General-purpose I/O pin of macrocell 6 in logic block A.
4 GND power_in Ground pin.
5 PD1/I/O bidirectional I/O pin that can serve as power-down pin PD1 (high powers the device down, supply current below 5mA); it cannot be used as logic input or output when power-down is enabled.
6 I/O bidirectional General-purpose I/O pin of macrocell 8 in logic block A.
7 TMS/I/O bidirectional General-purpose I/O (macrocell 9) that doubles as the JTAG TMS input, with an optional pull-up.
8 I/O bidirectional General-purpose I/O pin of macrocell 10 in logic block A.
9 VCC power_in +5V supply pin (5V ±10% industrial).
10 I/O bidirectional General-purpose I/O pin of macrocell 11 in logic block A.
11 I/O bidirectional General-purpose I/O pin of macrocell 12 in logic block A.
12 I/O bidirectional General-purpose I/O pin of macrocell 13 in logic block A.
13 I/O bidirectional General-purpose I/O pin of macrocell 14 in logic block A.
14 I/O bidirectional General-purpose I/O pin of macrocell 15 in logic block A.
15 I/O bidirectional General-purpose I/O pin of macrocell 16 in logic block A.
16 GND power_in Ground pin.
17 VCC power_in +5V supply pin (5V ±10% industrial).
18 I/O bidirectional General-purpose I/O pin of macrocell 32 in logic block B.
19 PD2/I/O bidirectional I/O pin that can serve as power-down pin PD2 (high powers the device down, supply current below 5mA); it cannot be used as logic input or output when power-down is enabled.
20 I/O bidirectional General-purpose I/O pin of macrocell 30 in logic block B.
21 I/O bidirectional General-purpose I/O pin of macrocell 29 in logic block B.
22 I/O bidirectional General-purpose I/O pin of macrocell 28 in logic block B.
23 I/O bidirectional General-purpose I/O pin of macrocell 27 in logic block B.
24 GND power_in Ground pin.
25 I/O bidirectional General-purpose I/O pin of macrocell 26 in logic block B.
26 I/O/TCK bidirectional General-purpose I/O (macrocell 25) that doubles as the JTAG TCK clock input for boundary-scan and ISP.
27 I/O bidirectional General-purpose I/O pin of macrocell 24 in logic block B.
28 I/O bidirectional General-purpose I/O pin of macrocell 23 in logic block B.
29 VCC power_in +5V supply pin (5V ±10% industrial).
30 I/O bidirectional General-purpose I/O pin of macrocell 22 in logic block B.
31 I/O bidirectional General-purpose I/O pin of macrocell 21 in logic block B.
32 I/O/TDO bidirectional General-purpose I/O (macrocell 20) that doubles as the JTAG TDO output for boundary-scan and ISP.
33 I/O bidirectional General-purpose I/O pin of macrocell 19 in logic block B.
34 I/O bidirectional General-purpose I/O pin of macrocell 18 in logic block B.
35 GCLK3/I/O bidirectional I/O pin of macrocell 32 that can also serve as global clock input GCLK3 (the datasheet pinout table lists it as I/O / GCLK3 at TQFP pin 35).
36 GND power_in Ground pin.
37 GCLK1/I input Dedicated input that can serve as global clock GCLK1.
38 I/OE1 input Dedicated input that can serve as global output enable OE1.
39 GCLR/I input Dedicated input that can serve as the global clear (register reset) signal GCLR.
40 GCLK2/OE2/I input Dedicated input that can serve as global clock GCLK2 or global output enable OE2.
41 VCC power_in +5V supply pin (5V ±10% industrial).
42 I/O bidirectional General-purpose I/O pin of macrocell 1 in logic block A.
43 I/O bidirectional General-purpose I/O pin of macrocell 2 in logic block A.
44 I/O bidirectional General-purpose I/O pin of macrocell 3 in logic block A.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature Under Bias -40 85 °C 10
Storage Temperature -65 150 °C 10
Voltage on Any Pin with Respect to Ground -2 7 V Min -0.6V may undershoot to -2.0V for <20ns; max output pin voltage VCC+0.75V may overshoot to 7.0V for <20ns 10
Voltage on Input Pins with Respect to Ground During Programming -2 14 V During programming 10
Programming Voltage with Respect to Ground -2 14 V 10
Input Pin Capacitance CIN 8 10 pF VIN = 0V; f = 1MHz 10
I/O Pin Capacitance CI/O 8 10 pF VOUT = 0V; f = 1MHz 10
Operating Temperature (Ambient), Industrial -40 85 °C Industrial 10
VCC (5.0V) Power Supply, Industrial VCC -10 5 10 % 5V ± 10%, Industrial 10
Input or I/O Low Leakage Current IIL -2 -10 μA VIN = VCC 11
Input or I/O High Leakage Current IIH 2 10 μA 11
Tri-state Output Off-state Current IOZ -40 40 μA VO = VCC or GND 11
Power Supply Current, Standby (Std Mode, Ind.) ICC1 75 mA VCC = Max; VIN = 0, VCC; Std Mode; Ind. 11
Power Supply Current, Power-down Mode ICC2 1 5 mA VCC = Max; VIN = 0, VCC; PD Mode 11
Reduced-power Mode Supply Current, Standby (Std Mode, Ind.) ICC3 40 mA VCC = Max; VIN = 0, VCC; Std Mode; Ind. 11
Input Low Voltage VIL -0.3 0.8 V 11
Input High Voltage VIH 2 V Max printed as VCCIO + 0.3 V 11
Output Low Voltage (TTL), Ind. VOL 0.45 V VIN = VIH or VIL; VCC = Min, IOL = 12mA; Ind. 11
Output Low Voltage (CMOS), Ind. VOL 0.2 V VIN = VIH or VIL; VCC = Min, IOL = 0.1mA; Ind. 11
Output High Voltage (TTL) VOH 2.4 V VIN = VIH or VIL; VCC = Min, IOH = -4.0mA 11
Input or Feedback to Non-registered Output tPD1 10 ns -10 grade 12
I/O Input or Feedback to Non-registered Feedback tPD2 9 ns -10 grade 12
Global Clock Setup Time tSU 7 ns -10 grade 12
Global Clock Hold Time tH 0 ns -10 grade 12
Global Clock Setup Time of Fast Input tFSU 3 ns -10 grade 12
Global Clock to Output Delay tCOP 5 ns -10 grade 12
Global Clock High Time tCH 4 ns -10 grade 12
Global Clock Low Time tCL 4 ns -10 grade 12
Array Clock Setup Time tASU 3 ns -10 grade 12
Array Clock Hold Time tAH 3 ns -10 grade 12
Array Clock Output Delay tACOP 10 ns -10 grade 12
Array Clock High Time tACH 4 ns -10 grade 12
Array Clock Low Time tACL 4 ns -10 grade 12
Minimum Clock Global Period tCNT 10 ns -10 grade 12
Maximum Internal Global Clock Frequency fCNT 100 MHz -10 grade 12
Minimum Array Clock Period tACNT 10 ns -10 grade 12
Maximum Internal Array Clock Frequency fACNT 100 MHz -10 grade 12
Maximum Clock Frequency fMAX 125 MHz -10 grade 12
Foldback Term Delay tSEXP 5 ns -10 grade 12
Logic Array Delay tLAD 5 ns -10 grade 12
Logic Control Delay tLAC 5 ns -10 grade 12
Internal Output Enable Delay tIOE 2 ns -10 grade 12
Output Buffer and Pad Delay tOD1 1.5 ns Slow slew rate = OFF; VCC = 5.0V; CL = 35pF 12
Output Buffer Enable Delay tZX1 5 ns Slow slew rate = OFF; VCCIO = 5.0V; CL = 35pF 13
Output Buffer Enable Delay tZX2 5.5 ns Slow slew rate = OFF; VCCIO = 3.3V; CL = 35pF 13
Output Buffer Enable Delay tZX3 9 ns Slow slew rate = ON; VCCIO = 5.0V/3.3V; CL = 35pF 13
Output Buffer Disable Delay tXZ 5 ns CL = 5pF 13
Register Setup Time tSU 3 ns -10 grade; Register 13
Register Hold Time tH 3 ns -10 grade; Register 13
Register Setup Time of Fast Input tFSU 3 ns -10 grade; Register 13
Register Delay tRD 2 ns -10 grade 13
Combinatorial Delay tCOMB 2 ns -10 grade 13
Array Clock Delay tIC 5 ns -10 grade 13
Register Enable Time tEN 5 ns -10 grade 13
Register Preset Time tPRE 3 ns -10 grade 13
Register Clear Time tCLR 3 ns -10 grade 13
Reduced-power Adder tRPA 11 ns -10 grade; added to tLAD, tLAC, tIC, tACL, tSEXP in reduced-power mode 13

CAD (KiCad official)

  • Symbol: ATF1502AS-10AU44
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: atf1502as-10au44-etched.step / atf1502as-10au44-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); atf1502as-10au44.step / atf1502as-10au44.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (29 pp, sha256 1abab0d93d034ad0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF