component
AT90PWM316-16MU
Public Made by Adomby adom
Microchip Tech Pre-ordered MCUs, QFN-32-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAT90PWM316-16MU
Microchip Tech · Pre-ordered MCUs · QFN-32-EP(7x7)
AT90PWM316-16MU from Microchip Tech, in a QFN-32-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD2 | bidirectional | Port D bit 2 I/O with alternate functions PSCIN2 (PSC 2 digital input), OC1A (Timer 1 output compare A) and MISO_A (programming/alternate SPI MISO). |
| 2 | PD3 | bidirectional | Port D bit 3 I/O with alternate functions TXD (DALI/UART Tx), OC0A, SS (SPI slave select) and MOSI_A (programming/alternate SPI MOSI). |
| 3 | PC1 | bidirectional | Port C bit 1 I/O with alternate functions PSCIN1 (PSC 1 digital input) and OC1B (Timer 1 output compare B). |
| 4 | VCC | power_in | Digital power supply (operating voltage 2.7V to 5.5V). |
| 5 | GND | power_in | Ground, 0V reference. |
| 6 | PC2 | bidirectional | Port C bit 2 I/O with alternate functions T0 (Timer 0 clock input) and PSCOUT22 output. |
| 7 | PC3 | bidirectional | Port C bit 3 I/O with alternate functions T1 (Timer 1 clock input) and PSCOUT23 output. |
| 8 | PB0 | bidirectional | Port B bit 0 I/O with alternate functions MISO (SPI Master In Slave Out) and PSCOUT20 output. |
| 9 | PB1 | bidirectional | Port B bit 1 I/O with alternate functions MOSI (SPI Master Out Slave In) and PSCOUT21 output. |
| 10 | PE1 | bidirectional | Port E bit 1 I/O; XTAL1 oscillator/clock input depending on clock fuse settings, alternate function OC0B (Timer 0 output compare B). |
| 11 | PE2 | bidirectional | Port E bit 2 I/O; XTAL2 oscillator output depending on clock fuse settings, alternate function ADC0 (analog input channel 0). |
| 12 | PD4 | bidirectional | Port D bit 4 I/O with alternate functions ADC1, RXD (DALI/UART Rx), ICP1A (Timer 1 input capture) and SCK_A (programming/alternate SPI clock). |
| 13 | PD5 | bidirectional | Port D bit 5 I/O with alternate functions ADC2 (analog input channel 2) and ACMP2 (analog comparator 2 positive input). |
| 14 | PD6 | bidirectional | Port D bit 6 I/O with alternate functions ADC3 (analog input channel 3), ACMPM (reference for analog comparators) and INT0. |
| 15 | PD7 | bidirectional | Port D bit 7 I/O with alternate function ACMP0 (analog comparator 0 positive input). |
| 16 | PB2 | bidirectional | Port B bit 2 I/O with alternate functions ADC5 (analog input channel 5) and INT1. |
| 17 | PC4 | bidirectional | Port C bit 4 I/O with alternate functions ADC8 (analog input channel 8) and AMP1- (differential amplifier 1 input). |
| 18 | PC5 | bidirectional | Port C bit 5 I/O with alternate functions ADC9 (analog input channel 9) and AMP1+ (differential amplifier 1 input). |
| 19 | AVCC | power_in | Analog power supply for the A/D converter; must be connected externally to VCC (through a low-pass filter if the ADC is used), even if the ADC is not used. |
| 20 | AGND | power_in | Analog ground, 0V reference for the analog part. |
| 21 | AREF | passive | Analog reference voltage of the A/D converter; as output it can be used by external analog circuitry. |
| 22 | PC6 | bidirectional | Port C bit 6 I/O with alternate functions ADC10 (analog input channel 10) and ACMP1 (analog comparator 1 positive input). |
| 23 | PB3 | bidirectional | Port B bit 3 I/O with alternate function AMP0- (differential amplifier 0 input). |
| 24 | PB4 | bidirectional | Port B bit 4 I/O with alternate function AMP0+ (differential amplifier 0 input). |
| 25 | PC7 | bidirectional | Port C bit 7 I/O with alternate function D2A (DAC output). |
| 26 | PB5 | bidirectional | Port B bit 5 I/O with alternate functions ADC6 (analog input channel 6) and INT2. |
| 27 | PB6 | bidirectional | Port B bit 6 I/O with alternate functions ADC7 (analog input channel 7), ICP1B (Timer 1 alternate input capture) and PSCOUT11 output. |
| 28 | PB7 | bidirectional | Port B bit 7 I/O with alternate functions PSCOUT01 output, ADC4 (analog input channel 4) and SCK (SPI clock). |
| 29 | PD0 | bidirectional | Port D bit 0 I/O with alternate functions PSCOUT00 output, XCK (UART transfer clock) and SS_A (alternate SPI slave select). |
| 30 | PC0 | bidirectional | Port C bit 0 I/O with alternate functions PSCOUT10 output and INT3. |
| 31 | PE0 | bidirectional | Port E bit 0: RESET input (low level longer than minimum pulse length generates a reset) unless RSTDISBL fuse is programmed, in which case it is an I/O; also OCD (on-chip debug I/O). |
| 32 | PD1 | bidirectional | Port D bit 1 I/O with alternate functions PSCIN0 (PSC 0 digital input) and CLKO (system clock output). |
| 33 | EP | power_in | Center GND paddle, which has to be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VCC | 2.7 | 5.5 | V | AT90PWM316-16MU, 16 MHz | 18 | |
| Extended Operating Temperature | -40 | 105 | °C | Extended range, QFN32 | 18 |
CAD (KiCad official)
- Symbol:
AT90PWM316-16MU - Footprint:
Package_DFN_QFN:QFN-32-1EP_7x7mm_P0.65mm_EP4.7x4.7mm - 3D model: QFN-32-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
at90pwm316-16mu-etched.step/at90pwm316-16mu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at90pwm316-16mu.step/at90pwm316-16mu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
7359c126d2e451fd, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).