component
AT90PWM2-16SQ
Public Made by Adomby adom
Microchip Tech Pre-ordered MCUs, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAT90PWM2-16SQ
Microchip Tech · Pre-ordered MCUs · SOIC-24-300mil
AT90PWM2-16SQ from Microchip Tech, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD0 | bidirectional | Port D bit 0 with internal pull-up; alternate functions are PSCOUT00 output, XCK (UART transfer clock) and SS_A (alternate SPI slave select). |
| 2 | PE0 | bidirectional | Port E bit 0 used as RESET input when the RSTDISBL fuse is unprogrammed (a low level longer than the minimum pulse length in Table 9-1 generates a reset, shorter pulses are not guaranteed) or as an I/O pin when RSTDISBL is programmed; also OCD on-chip debug I/O. |
| 3 | PD1 | bidirectional | Port D bit 1 with internal pull-up; alternate functions are PSCIN0 (PSC 0 digital input) and CLKO (system clock output). |
| 4 | PD2 | bidirectional | Port D bit 2 with internal pull-up; alternate functions are PSCIN2 (PSC 2 digital input), OC1A (Timer 1 output compare A) and MISO_A (programming and alternate SPI master in/slave out). |
| 5 | PD3 | bidirectional | Port D bit 3 with internal pull-up; alternate functions are TXD (DALI/UART Tx data), OC0A (Timer 0 output compare A), SS (SPI slave select) and MOSI_A (programming and alternate SPI master out/slave in). |
| 6 | VCC | power_in | Digital supply voltage (2.7 V to 5.5 V operating voltage per the summary). |
| 7 | GND | power_in | Ground, 0 V reference. |
| 8 | PB0 | bidirectional | Port B bit 0 with internal pull-up; alternate functions are MISO (SPI master in slave out) and PSCOUT20 output. |
| 9 | PB1 | bidirectional | Port B bit 1 with internal pull-up; alternate functions are MOSI (SPI master out slave in) and PSCOUT21 output. |
| 10 | PE1 | bidirectional | Port E bit 1; depending on the clock selection fuse settings it is the input to the inverting oscillator amplifier and the internal clock operating circuit (XTAL1), and it also serves as OC0B (Timer 0 output compare B). |
| 11 | PE2 | bidirectional | Port E bit 2; depending on the clock selection fuse settings it is the output of the inverting oscillator amplifier (XTAL2), and it also serves as ADC0 analog input channel 0. |
| 12 | PD4 | bidirectional | Port D bit 4 with internal pull-up; alternate functions are ADC1 (analog input channel 1), RXD (DALI/UART Rx data), ICP1A (Timer 1 input capture) and SCK_A (programming and alternate SPI clock). |
| 13 | PD5 | bidirectional | Port D bit 5 with internal pull-up; alternate functions are ADC2 (analog input channel 2) and ACMP2 (analog comparator 2 positive input). |
| 14 | PD6 | bidirectional | Port D bit 6 with internal pull-up; alternate functions are ADC3 (analog input channel 3), ACMPM (reference for analog comparators) and INT0 (external interrupt 0). |
| 15 | PD7 | bidirectional | Port D bit 7 with internal pull-up; alternate function is ACMP0 (analog comparator 0 positive input). |
| 16 | PB2 | bidirectional | Port B bit 2 with internal pull-up; alternate functions are ADC5 (analog input channel 5) and INT1 (external interrupt 1). |
| 17 | AVCC | power_in | Analog supply voltage for the A/D converter; it must be connected to VCC even if the ADC is not used, and through a low-pass filter if the ADC is used. |
| 18 | AGND | power_in | Analog ground, 0 V reference for the analog part. |
| 19 | AREF | passive | Analog reference for the A/D converter (reference voltage of the ADC); as an output it can be used by external analog circuitry. |
| 20 | PB3 | bidirectional | Port B bit 3 with internal pull-up; alternate function is AMP0- (analog differential amplifier 0 negative input channel). |
| 21 | PB4 | bidirectional | Port B bit 4 with internal pull-up; alternate function is AMP0+ (analog differential amplifier 0 positive input channel). |
| 22 | PB5 | bidirectional | Port B bit 5 with internal pull-up; alternate functions are ADC6 (analog input channel 6) and INT2 (external interrupt 2). |
| 23 | PB6 | bidirectional | Port B bit 6 with internal pull-up; alternate functions are ADC7 (analog input channel 7) and ICP1B (Timer 1 alternate input capture); the PSCOUT11 output listed for this pin is not present on the 24-pin package. |
| 24 | PB7 | bidirectional | Port B bit 7 with internal pull-up; alternate functions are PSCOUT01 output, ADC4 (analog input channel 4) and SCK (SPI clock). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-24-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (power supply) | 2.7 | 5.5 | V | Operating voltage, Extended range; ordering table lists 2.7-5.5V for AT90PWM2-16SQ | 2 | ||
| Extended operating temperature | -40 | 105 | °C | Extended operating temperature range | 2 | ||
| Speed grade (clock) | 16 | MHz | Speed (MHz) column of ordering table for AT90PWM2-16SQ; printed as a speed grade, not as a min/max electrical limit | 11 |
CAD (KiCad official)
- Symbol:
AT90PWM2-16SQ - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
at90pwm2-16sq-etched.step/at90pwm2-16sq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at90pwm2-16sq.step/at90pwm2-16sq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (25 pp, sha256
a17c3c1e353ab729, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).