AT86RF233-ZU

@@ -0,0 +1,132 @@+# AT86RF233-ZU++**Microchip Tech** · RF Transceiver ICs · QFN-32-EP(5x5)++AT86RF233-ZU from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DIG3 | output | Digital output providing the RX/TX indicator (Section 11.5), with pull-down to AVSS enabled when the function is disabled. |+| 2 | DIG4 | output | Digital output providing the RX/TX indicator inverted relative to DIG3 (Section 11.5), with pull-down to AVSS enabled when the function is disabled. |+| 3 | AVSS | power_in | Analog ground for RF signals. |+| 4 | RFP | bidirectional | Differential RF port designed for a 100Ω differential load; a DC path to ground or supply voltage is not allowed. |+| 5 | RFN | bidirectional | Differential RF port designed for a 100Ω differential load; a DC path to ground or supply voltage is not allowed. |+| 6 | AVSS | power_in | Analog ground for RF signals. |+| 7 | DVSS | power_in | Digital ground; analog and digital power domains should be separated on the PCB. |+| 8 | /RST | input | Active-low chip reset input; internal pull-up is active only in P_ON and DEEP_SLEEP states. |+| 9 | DIG1 | output | Digital output for antenna diversity RF switch control (Section 11.4), with pull-down to DVSS enabled when the function is disabled. |+| 10 | DIG2 | output | Digital output for antenna diversity switch control (inverted DIG1), RX and TX frame time stamping (Section 11.6), with pull-down to DVSS when disabled. |+| 11 | SLP_TR | input | Digital input controlling sleep, deep sleep, transmit start and receive states; active high (Section 6.6). |+| 12 | DVSS | power_in | Digital ground. |+| 13 | DVDD | power_out | Regulated 1.8V digital regulator output or regulated voltage input (digital domain); outputs shall be bypassed by 100nF. |+| 14 | DVDD | power_out | Regulated 1.8V digital regulator output or regulated voltage input (digital domain); outputs shall be bypassed by 100nF. |+| 15 | DEVDD | power_in | External supply voltage for the digital domain, specified as 1.8V to 3.6V. |+| 16 | DVSS | power_in | Digital ground. |+| 17 | CLKM | output | Master clock signal output, low when disabled; capacitive load should be no larger than 50pF. |+| 18 | DVSS | power_in | Digital ground. |+| 19 | SCLK | input | SPI clock input. |+| 20 | MISO | output | SPI data output (master input slave output); driver strength is fixed and capacitive load should be no larger than 50pF. |+| 21 | DVSS | power_in | Digital ground. |+| 22 | MOSI | input | SPI data input (master output slave input). |+| 23 | /SEL | input | SPI select input, active low. |+| 24 | IRQ | output | Interrupt request output, configurable as active high or active low; also serves as an active-high Frame Buffer Empty indicator (Section 11.7). |+| 25 | XTAL2 | input | Crystal oscillator pin; parasitic pin capacitance of 3pF must be considered as additional load capacitance on the crystal. |+| 26 | XTAL1 | input | Crystal oscillator input, or external clock supply input when an external reference clock is used. |+| 27 | AVSS | power_in | Analog ground. |+| 28 | EVDD | power_in | External supply voltage for the analog domain, specified as 1.8V to 3.6V. |+| 29 | AVDD | power_out | Regulated 1.8V analog regulator output for the analog domain; output shall be bypassed by 100nF. |+| 30 | AVSS | power_in | Analog ground. |+| 31 | AVSS | power_in | Analog ground. |+| 32 | AVSS | power_in | Analog ground. |+| 33 | AVSS | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-32-EP(5x5) |+| Category | RF & Radio |+| Pins | 33 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Storage temperature | TSTOR | -50 |  | 150 | °C |  | 189 |+| Lead temperature | TLEAD |  |  | 260 | °C | T = 10s (soldering profile compliant with IPC/JEDEC J STD 020B) | 189 |+| ESD robustness, Human Body Model | VESD |  |  | 4 | kV | Human Body Model (HBM) | 189 |+| Input RF level | PRF |  |  | 10 | dBm |  | 189 |+| Voltage on all pins | VDIG | -0.3 |  |  | V | Except pins 4, 5, 13, 14, 29; upper limit printed as VDD+0.3 V | 189 |+| Voltage on pins 4, 5, 13, 14, 29 | VANA | -0.3 |  | 2 | V | Pins 4, 5, 13, 14, 29 | 189 |+| Operating temperature range | TOP | -40 | 25 | 85 | °C |  | 189 |+| Supply voltage | VDD | 1.8 | 3 | 3.6 | V | Voltage on pins 15, 28 | 189 |+| Supply voltage (on pins 13, 14, 29) | VDD1.8 | 1.7 | 1.8 | 1.9 | V | External voltage supply | 189 |+| Low level input voltage | VIL |  |  | 0.4 | V | TOP = +25°C | 190 |+| Low level output voltage | VOL |  |  | 0.4 | V | TOP = +25°C | 190 |+| Capacitive load | CLoad |  |  | 50 | pF | TOP = +25°C; should not be larger than 50pF for all I/Os | 190 |+| SCLK frequency, synchronous operation | fsync |  |  | 8 | MHz | Synchronous operation; TOP = +25°C, VDD = 3.0V, CLoad = 50pF | 190 |+| /SEL falling edge to MISO active | t1 |  |  | 180 | ns | TOP = +25°C, VDD = 3.0V, CLoad = 50pF | 190 |+| MOSI setup time | t3 | 10 |  |  | ns | TOP = +25°C, VDD = 3.0V, CLoad = 50pF | 190 |+| LSB last byte to MSB next byte (SPI read/write, standard SRAM and frame access modes) | t5 | 250 |  |  | ns | TOP = +25°C, VDD = 3.0V, CLoad = 50pF | 190 |+| SLP_TR pulse width, TX start trigger | t7 | 62.5 |  |  | ns | TX start trigger; maximum pulse width less than TX frame length + 16µs | 190 |+| Reset pulse width | t10 | 625 |  |  | ns | ≥ 10 clock cycles at 16MHz | 190 |+| Frame buffer empty indicator latency | t12 |  |  | 750 | ns | Rising edge of last SCLK of Frame Buffer read command byte to rising edge of IRQ | 190 |+| IRQ_2, IRQ_3, IRQ_4 latency | tIRQ |  |  | 9 | µs | Relative to the event to be indicated | 190 |+| Frequency range | fRF | 2405 | 2445 | 2480 | MHz | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; as specified in [1], [2] | 191 |+| Frequency range, 500kHz spacing | fRF | 2322 |  | 2527 | MHz | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; 500kHz spacing | 191 |+| Symbol rate deviation (reference frequency accuracy), 250kb/s | fSRD | -60 |  | 60 | ppm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PSDU bit rate 250kb/s | 191 |+| Symbol rate deviation (reference frequency accuracy), 500kb/s | fSRD | -40 |  | 40 | ppm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PSDU bit rate 500kb/s | 191 |+| Symbol rate deviation (reference frequency accuracy), 1000kb/s | fSRD | -40 |  | 40 | ppm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PSDU bit rate 1000kb/s | 191 |+| Symbol rate deviation (reference frequency accuracy), 2000kb/s | fSRD | -30 |  | 30 | ppm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PSDU bit rate 2000kb/s | 191 |+| TX output power (maximum configurable) | PTX_MAX |  |  | 4 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; register bit TX_PWR = 0 | 192 |+| Output power tolerance | PACC | -2 |  | 2 | dB | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 192 |+| Error vector magnitude | EVM |  |  | 12 | %rms | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 192 |+| 2nd harmonic | PHARM |  |  | -40 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 192 |+| 3rd harmonic | PHARM |  |  | -45 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 192 |+| Spurious emissions, 30 to ≤1000 MHz | PSPUR_TX |  |  | -36 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; 30, ≤1000 MHz | 192 |+| Spurious emissions, >1 to 12.75 GHz | PSPUR_TX |  |  | -30 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; >1, 12.75 GHz | 192 |+| Receiver sensitivity, 250kb/s | PSENS |  |  | -101 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C, fPSDU = 250kb/s; AWGN channel, PER ≤ 1%, PSDU length 20 octets | 192 |+| Receiver sensitivity, 2000kb/s | PSENS |  |  | -88 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; 2000kb/s; AWGN channel, PER ≤ 1%, PSDU length 20 octets | 192 |+| RX return loss | RLRX | 10 |  |  | dB | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; 100Ω differential impedance | 192 |+| Noise figure | NF |  |  | 6 | dB | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 192 |+| Maximum RX input level, 250kb/s | PRX_MAX |  |  | 8 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; 250kb/s | 192 |+| Spurious emissions: LO leakage | PSPUR_RX |  |  | -70 | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; LO leakage | 193 |+| TX/RX carrier frequency offset | fCAR_OFFS | -300 |  | 300 | kHz | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; sensitivity loss ≤ 2dB; offset equals ±120ppm | 193 |+| 3rd-order intercept point (IIP3) | IIP3 | -10 |  |  | dBm | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; at maximum gain; offset freq. interferer 1 = 5MHz, interferer 2 = 10MHz | 193 |+| RSSI tolerance | RSSITOL | -5 |  | 5 | dB | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; tolerance within gain step | 193 |+| RSSI dynamic range | RSSIRANGE | 87 |  |  | dB | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C | 193 |+| Supply current, transmit state, PTX = +4dBm | IBUSY_TX |  |  | 13.8 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PTX = +4dBm | 193 |+| Supply current, transmit state, PTX = +0dBm | IBUSY_TX |  |  | 11.8 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PTX = +0dBm | 193 |+| Supply current, transmit state, PTX = -17dBm | IBUSY_TX |  |  | 7.2 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PTX = -17dBm | 193 |+| Supply current, RX_ON state, high sensitivity | IRX_ON |  |  | 11.8 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; high sensitivity, RX_PDT_LEVEL = [0x0] | 193 |+| Supply current, RX_ON state, with receiver desensitize | IRX_ON_L0 |  |  | 11.3 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; RX_PDT_LEVEL = [0x1, …, 0xE, 0xF] | 193 |+| Supply current, PLL_ON state | IPLL_ON |  |  | 5.2 | mA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; PLL_ON state | 193 |+| Supply current, TRX_OFF state | ITRX_OFF |  |  | 300 | µA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; TRX_OFF state | 193 |+| Supply current, SLEEP state | ISLEEP |  |  | 0.2 | µA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; SLEEP state | 194 |+| Supply current, DEEP_SLEEP state | IDEEP_SLEEP |  |  | 0.02 | µA | VDD = 3.0V, fRF = 2445MHz, TOP = +25°C; DEEP_SLEEP state | 194 |+| Crystal load capacitance | CL | 8 |  | 14 | pF | TOP = +25°C, VDD = 3.0V | 194 |+| Crystal shunt capacitance | C0 |  |  | 7 | pF | TOP = +25°C, VDD = 3.0V | 194 |+| Equivalent series resistance | ESR |  |  | 100 | Ω | TOP = +25°C, VDD = 3.0V | 194 |+| Package thermal resistance, junction to ambient, 0 m/s | Theta ja |  | 40.9 |  | K/W | Air velocity 0 m/s | 208 |++## CAD (KiCad official)++- Symbol: `AT86RF233-ZU`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `at86rf233-zu-etched.step` / `at86rf233-zu-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `at86rf233-zu.step` / `at86rf233-zu.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](docs/at86rf233-zu-datasheet.pdf) (225 pp, sha256 `a10810f104df0459`, retrieved 2026-10-30, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/at86rf233-zu-datasheet.pdf)

@@ -0,0 +1,801 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AT86RF233-ZU",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 33,+      "span_mm": 8.175,+      "dash_mm": 0.2044,+      "gap_mm": 0.1226,+      "pad_stroke_mm": 0.0491+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 32,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.46,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.5,+      2.5,+      -2.5,+      2.5+    ],+    "pads_bbox_mm": [+      -2.875,+      2.875,+      -2.875,+      2.875+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "at86rf233-zu-etched.glb",+    "glb_sha256": "864ebdfd84ca0c1656494703bf62bfe7ef4441e23ee8fcacd601227836e1e492",+    "footprint": "at86rf233-zu.kicad_mod",+    "footprint_sha256": "4ff02f2f15aa6af8f3e69bf3c735aeb163e8e19719f0f68efce66acee2442e41",+    "pins": "page.json component.pins",+    "pins_sha256": "6ae32e070baf4e45cf4d2e00d579c1da5ab69dfc64787c5d7402f2813c78351f"+  },+  "generator": "adom-wiki 1.8.2 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "DIG3",+      "x": -3.57,+      "y": -1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "DIG4",+      "x": -2.975,+      "y": -1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "AVSS",+      "x": -2.975,+      "y": -0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "RFP",+      "x": -2.975,+      "y": -0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "RFN",+      "x": -2.975,+      "y": 0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "AVSS",+      "x": -2.975,+      "y": 0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "DVSS",+      "x": -2.975,+      "y": 1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "/RST",+      "x": -2.975,+      "y": 1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "DIG1",+      "x": -1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "DIG2",+      "x": -1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "SLP_TR",+      "x": -0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "DVSS",+      "x": -0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "DVDD",+      "x": 0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "DVDD",+      "x": 0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "DEVDD",+      "x": 1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "DVSS",+      "x": 1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "CLKM",+      "x": 2.975,+      "y": 1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "DVSS",+      "x": 2.975,+      "y": 1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "SCLK",+      "x": 2.975,+      "y": 0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "MISO",+      "x": 2.975,+      "y": 0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "DVSS",+      "x": 2.975,+      "y": -0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "MOSI",+      "x": 2.975,+      "y": -0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "/SEL",+      "x": 2.975,+      "y": -1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "IRQ",+      "x": 2.975,+      "y": -1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "XTAL2",+      "x": 1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "XTAL1",+      "x": 1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "AVSS",+      "x": 0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "EVDD",+      "x": 0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "29",+      "text": "AVDD",+      "x": -0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "30",+      "text": "AVSS",+      "x": -0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "31",+      "text": "AVSS",+      "x": -1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "32",+      "text": "AVSS",+      "x": -1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        3.3,+        3.3+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,421 @@+(footprint "QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf#page=68)")+	(tags "QFN NoLead")+	(property "Reference" "REF**"+		(at 0 -3.83 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm"+		(at 0 3.83 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/no_lead"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -2.61 -2.61)+		(end -2.135 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -2.61 -2.135)+		(end -2.61 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -2.61 2.61)+		(end -2.61 2.135)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -2.135 2.61)+		(end -2.61 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.135 -2.61)+		(end 2.61 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 -2.61)+		(end 2.61 -2.135)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 2.135)+		(end 2.61 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 2.61)+		(end 2.135 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -3.14 -1.75)+			(xy -3.47 -1.51)+			(xy -3.47 -1.99)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -1.5 -2.5)+			(xy 2.5 -2.5)+			(xy 2.5 2.5)+			(xy -2.5 2.5)+			(xy -2.5 -1.5)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "" smd roundrect+		(at -1.1 -1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at -1.1 0)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at -1.1 1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 -1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 0)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.1 -1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.1 0)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.1 1.1)+		(size 0.89 0.89)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "1" smd roundrect+		(at -2.4375 -1.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -2.4375 -1.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -2.4375 -0.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2.4375 -0.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -2.4375 0.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -2.4375 0.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -2.4375 1.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -2.4375 1.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -1.75 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -1.25 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at -0.75 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at -0.25 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 0.25 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 0.75 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 1.25 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 1.75 2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 2.4375 1.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 2.4375 1.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 2.4375 0.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 2.4375 0.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "21" smd roundrect+		(at 2.4375 -0.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "22" smd roundrect+		(at 2.4375 -0.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "23" smd roundrect+		(at 2.4375 -1.25)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "24" smd roundrect+		(at 2.4375 -1.75)+		(size 0.875 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "25" smd roundrect+		(at 1.75 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "26" smd roundrect+		(at 1.25 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "27" smd roundrect+		(at 0.75 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "28" smd roundrect+		(at 0.25 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "29" smd roundrect+		(at -0.25 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "30" smd roundrect+		(at -0.75 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "31" smd roundrect+		(at -1.25 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "32" smd roundrect+		(at -1.75 -2.4375)+		(size 0.25 0.875)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "33" smd rect+		(at 0 0)+		(size 3.3 3.3)+		(property pad_prop_heatsink)+		(layers "F.Cu" "F.Mask")+		(zone_connect 2)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -3.13 -2.13) (xy -2.75 -2.13) (xy -2.75 -2.75) (xy -2.13 -2.75) (xy -2.13 -3.13) (xy 2.13 -3.13) (xy 2.13 -2.75) (xy 2.75 -2.75) (xy 2.75 -2.13) (xy 3.13 -2.13) (xy 3.13 2.13) (xy 2.75 2.13) (xy 2.75 2.75) (xy 2.13 2.75) (xy 2.13 3.13) (xy -2.13 3.13) (xy -2.13 2.75) (xy -2.75 2.75) (xy -2.75 2.13) (xy -3.13 2.13))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,145 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "AT86RF233-ZU" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 25.40 0) (effects (font (size 1.27 1.27))))+    (property "Value" "AT86RF233-ZU" (at 0 -25.40 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "AT86RF233-ZU_0_1"+    (rectangle (start -12.70 22.86) (end 12.70 -22.86)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "AT86RF233-ZU_1_1"+    (pin output line (at -17.78 20.32 0) (length 5.08)+      (name "DIG3" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 17.78 0) (length 5.08)+      (name "DIG4" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 15.24 0) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+      (name "RFP" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+      (name "RFN" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 7.62 0) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 5.08 0) (length 5.08)+      (name "DVSS" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 2.54 0) (length 5.08)+      (name "/RST" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 0.00 0) (length 5.08)+      (name "DIG1" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 -2.54 0) (length 5.08)+      (name "DIG2" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -5.08 0) (length 5.08)+      (name "SLP_TR" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -7.62 0) (length 5.08)+      (name "DVSS" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at -17.78 -10.16 0) (length 5.08)+      (name "DVDD" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at -17.78 -12.70 0) (length 5.08)+      (name "DVDD" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -15.24 0) (length 5.08)+      (name "DEVDD" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -17.78 0) (length 5.08)+      (name "DVSS" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 -20.32 0) (length 5.08)+      (name "CLKM" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at 17.78 17.78 180) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "33" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 15.24 180) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "32" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 12.70 180) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "31" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 10.16 180) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "30" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at 17.78 7.62 180) (length 5.08)+      (name "AVDD" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 5.08 180) (length 5.08)+      (name "EVDD" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 2.54 180) (length 5.08)+      (name "AVSS" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 0.00 180) (length 5.08)+      (name "XTAL1" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -2.54 180) (length 5.08)+      (name "XTAL2" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 -5.08 180) (length 5.08)+      (name "IRQ" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -7.62 180) (length 5.08)+      (name "/SEL" (effects (font (size 1.27 1.27))))+      (number "23" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -10.16 180) (length 5.08)+      (name "MOSI" (effects (font (size 1.27 1.27))))+      (number "22" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -12.70 180) (length 5.08)+      (name "DVSS" (effects (font (size 1.27 1.27))))+      (number "21" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 -15.24 180) (length 5.08)+      (name "MISO" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -17.78 180) (length 5.08)+      (name "SCLK" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -20.32 180) (length 5.08)+      (name "DVSS" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,207 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm">+  <description>QFN-32-1EP, 5 x 5 mm, 0.5 mm pitch</description>+  <smd name="1" x="-2.4375" y="1.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="2" x="-2.4375" y="1.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="3" x="-2.4375" y="0.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="4" x="-2.4375" y="0.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="5" x="-2.4375" y="-0.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="6" x="-2.4375" y="-0.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="7" x="-2.4375" y="-1.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="8" x="-2.4375" y="-1.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="9" x="-1.7500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="10" x="-1.2500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="11" x="-0.7500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="12" x="-0.2500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="13" x="0.2500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="14" x="0.7500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="15" x="1.2500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="16" x="1.7500" y="-2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="17" x="2.4375" y="-1.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="18" x="2.4375" y="-1.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="19" x="2.4375" y="-0.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="20" x="2.4375" y="-0.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="21" x="2.4375" y="0.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="22" x="2.4375" y="0.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="23" x="2.4375" y="1.2500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="24" x="2.4375" y="1.7500" dx="0.8750" dy="0.2500" layer="1" roundness="50"/>+  <smd name="25" x="1.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="26" x="1.2500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="27" x="0.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="28" x="0.2500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="29" x="-0.2500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="30" x="-0.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="31" x="-1.2500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="32" x="-1.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>+  <smd name="33" x="0.0000" y="-0.0000" dx="3.3000" dy="3.3000" layer="1" cream="no"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-3.1400" y="1.7500"/>+    <vertex x="-3.4700" y="1.5100"/>+    <vertex x="-3.4700" y="1.9900"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-1.5000" y="2.5000"/>+    <vertex x="2.5000" y="2.5000"/>+    <vertex x="2.5000" y="-2.5000"/>+    <vertex x="-2.5000" y="-2.5000"/>+    <vertex x="-2.5000" y="1.5000"/>+  </polygon>+  <wire x1="-2.6100" y1="2.6100" x2="-2.1350" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="-2.6100" y1="2.1350" x2="-2.6100" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="-2.6100" y1="-2.6100" x2="-2.6100" y2="-2.1350" width="0.1200" layer="21"/>+  <wire x1="-2.1350" y1="-2.6100" x2="-2.6100" y2="-2.6100" width="0.1200" layer="21"/>+  <wire x1="2.1350" y1="2.6100" x2="2.6100" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="2.6100" x2="2.6100" y2="2.1350" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="-2.1350" x2="2.6100" y2="-2.6100" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="-2.6100" x2="2.1350" y2="-2.6100" width="0.1200" layer="21"/>+  <text x="0" y="3.475" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-3.475" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="AT86RF233-ZU">+  <wire x1="-12.7" y1="22.86" x2="12.7" y2="22.86" width="0.254" layer="94"/>+  <wire x1="12.7" y1="22.86" x2="12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-22.86" x2="-12.7" y2="22.86" width="0.254" layer="94"/>+  <text x="0.0000" y="25.4000" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-25.4000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="DIG3" x="-17.78" y="20.32" length="middle" direction="out"/>+  <pin name="DIG4" x="-17.78" y="17.78" length="middle" direction="out"/>+  <pin name="AVSS" x="-17.78" y="15.24" length="middle" direction="pwr"/>+  <pin name="RFP" x="-17.78" y="12.7" length="middle" direction="io"/>+  <pin name="RFN" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="AVSS@2" x="-17.78" y="7.62" length="middle" direction="pwr"/>+  <pin name="DVSS" x="-17.78" y="5.08" length="middle" direction="pwr"/>+  <pin name="/RST" x="-17.78" y="2.54" length="middle" direction="in"/>+  <pin name="DIG1" x="-17.78" y="0" length="middle" direction="out"/>+  <pin name="DIG2" x="-17.78" y="-2.54" length="middle" direction="out"/>+  <pin name="SLP_TR" x="-17.78" y="-5.08" length="middle" direction="in"/>+  <pin name="DVSS@2" x="-17.78" y="-7.62" length="middle" direction="pwr"/>+  <pin name="DVDD" x="-17.78" y="-10.16" length="middle" direction="out"/>+  <pin name="DVDD@2" x="-17.78" y="-12.7" length="middle" direction="out"/>+  <pin name="DEVDD" x="-17.78" y="-15.24" length="middle" direction="pwr"/>+  <pin name="DVSS@3" x="-17.78" y="-17.78" length="middle" direction="pwr"/>+  <pin name="CLKM" x="-17.78" y="-20.32" length="middle" direction="out"/>+  <pin name="AVSS@3" x="17.78" y="17.78" length="middle" direction="pas" rot="R180"/>+  <pin name="AVSS@4" x="17.78" y="15.24" length="middle" direction="pwr" rot="R180"/>+  <pin name="AVSS@5" x="17.78" y="12.7" length="middle" direction="pwr" rot="R180"/>+  <pin name="AVSS@6" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>+  <pin name="AVDD" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+  <pin name="EVDD" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>+  <pin name="AVSS@7" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="XTAL1" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+  <pin name="XTAL2" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+  <pin name="IRQ" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+  <pin name="/SEL" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+  <pin name="MOSI" x="17.78" y="-10.16" length="middle" direction="in" rot="R180"/>+  <pin name="DVSS@4" x="17.78" y="-12.7" length="middle" direction="pwr" rot="R180"/>+  <pin name="MISO" x="17.78" y="-15.24" length="middle" direction="out" rot="R180"/>+  <pin name="SCLK" x="17.78" y="-17.78" length="middle" direction="in" rot="R180"/>+  <pin name="DVSS@5" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="AT86RF233-ZU" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="AT86RF233-ZU" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm">+      <connects>+        <connect gate="G$1" pin="DIG3" pad="1"/>+        <connect gate="G$1" pin="DIG4" pad="2"/>+        <connect gate="G$1" pin="AVSS" pad="3"/>+        <connect gate="G$1" pin="RFP" pad="4"/>+        <connect gate="G$1" pin="RFN" pad="5"/>+        <connect gate="G$1" pin="AVSS@2" pad="6"/>+        <connect gate="G$1" pin="DVSS" pad="7"/>+        <connect gate="G$1" pin="/RST" pad="8"/>+        <connect gate="G$1" pin="DIG1" pad="9"/>+        <connect gate="G$1" pin="DIG2" pad="10"/>+        <connect gate="G$1" pin="SLP_TR" pad="11"/>+        <connect gate="G$1" pin="DVSS@2" pad="12"/>+        <connect gate="G$1" pin="DVDD" pad="13"/>+        <connect gate="G$1" pin="DVDD@2" pad="14"/>+        <connect gate="G$1" pin="DEVDD" pad="15"/>+        <connect gate="G$1" pin="DVSS@3" pad="16"/>+        <connect gate="G$1" pin="CLKM" pad="17"/>+        <connect gate="G$1" pin="AVSS@3" pad="33"/>+        <connect gate="G$1" pin="AVSS@4" pad="32"/>+        <connect gate="G$1" pin="AVSS@5" pad="31"/>+        <connect gate="G$1" pin="AVSS@6" pad="30"/>+        <connect gate="G$1" pin="AVDD" pad="29"/>+        <connect gate="G$1" pin="EVDD" pad="28"/>+        <connect gate="G$1" pin="AVSS@7" pad="27"/>+        <connect gate="G$1" pin="XTAL1" pad="26"/>+        <connect gate="G$1" pin="XTAL2" pad="25"/>+        <connect gate="G$1" pin="IRQ" pad="24"/>+        <connect gate="G$1" pin="/SEL" pad="23"/>+        <connect gate="G$1" pin="MOSI" pad="22"/>+        <connect gate="G$1" pin="DVSS@4" pad="21"/>+        <connect gate="G$1" pin="MISO" pad="20"/>+        <connect gate="G$1" pin="SCLK" pad="19"/>+        <connect gate="G$1" pin="DVSS@5" pad="18"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,8341 @@+ISO-10303-21;
+HEADER;
+/* QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm.step 3D STEP model for use in ECAD systems
+ * Copyright (C) 2019, kicad StepUp
+ * 
+ * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), 
+ * with the following exception:
+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', 
+ * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided 
+ * as part of the 'Licensed Material'.
+ * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement.
+ * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. 
+ * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception.
+ * Disclaimer of Warranties and Limitation of Liability.
+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.
+ * *USE 3D CAD DATA AT YOUR OWN RISK*
+ * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.*
+ * 
+ */
+
+FILE_DESCRIPTION(
+/* description */ ('model of QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm'),
+/* implementation_level */ '2;1');
+
+FILE_NAME(
+/* name */ 'QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm.step',
+/* time_stamp */ '2019-12-20T11:50:21',
+/* author */ ('kicad StepUp','ksu'),
+/* organization */ ('FreeCAD'),
+/* preprocessor_version */ 'OCC',
+/* originating_system */ 'kicad StepUp',
+/* authorisation */ '');
+
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',
+'automotive_design',2000,#2);
+#2 = APPLICATION_CONTEXT(
+'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('QFN_32_1EP_5x5mm_P05mm_EP33x33mm',
+'QFN_32_1EP_5x5mm_P05mm_EP33x33mm','',(#8));
+#8 = PRODUCT_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#6785);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.,0.,0.));
+#13 = DIRECTION('',(0.,0.,1.));
+#14 = DIRECTION('',(1.,0.,-0.));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#57,#96,#120,#1242,#1259,#1276,#1288,#1503,
+#1543,#1568,#1601,#1641,#1666,#1699,#1739,#1764,#1797,#1837,#1862,
+#1895,#1935,#1960,#1993,#2033,#2058,#2091,#2131,#2156,#2189,#2229,
+#2254,#2287,#2495,#2535,#2560,#2593,#2633,#2658,#2691,#2731,#2756,
+#2789,#2829,#2854,#2887,#2927,#2952,#2985,#3025,#3050,#3083,#3123,
+#3148,#3181,#3221,#3246,#3279,#3487,#3527,#3552,#3585,#3625,#3650,
+#3683,#3723,#3748,#3781,#3821,#3846,#3879,#3919,#3944,#3977,#4017,
+#4042,#4075,#4115,#4140,#4173,#4213,#4238,#4271,#4472,#4512,#4537,
+#4570,#4610,#4635,#4668,#4708,#4733,#4766,#4806,#4831,#4864,#4904,
+#4929,#4962,#5002,#5027,#5060,#5100,#5125,#5158,#5198,#5223,#5256,
+#5279,#5296,#5313,#5330,#5347,#5364,#5381,#5398,#5415,#5432,#5444,
+#5461,#5473,#5490,#5502,#5519,#5531,#5548,#5560,#5577,#5589,#5606,
+#5618,#5635,#5647,#5664,#5681,#5698,#5715,#5732,#5749,#5766,#5783,
+#5800,#5812,#5829,#5841,#5858,#5870,#5887,#5899,#5916,#5928,#5945,
+#5957,#5974,#5986,#6003,#6015,#6032,#6049,#6066,#6083,#6100,#6117,
+#6134,#6151,#6168,#6180,#6197,#6209,#6226,#6238,#6255,#6267,#6284,
+#6296,#6313,#6325,#6342,#6354,#6371,#6383,#6400,#6417,#6434,#6451,
+#6468,#6485,#6502,#6519,#6536,#6548,#6565,#6577,#6594,#6606,#6623,
+#6635,#6652,#6664,#6681,#6693,#6710,#6722,#6739,#6751,#6776));
+#17 = ADVANCED_FACE('',(#18),#52,.F.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#30,#38,#46));
+#20 = ORIENTED_EDGE('',*,*,#21,.F.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(-1.65,1.45,0.));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-1.65,-1.65,0.));
+#26 = LINE('',#27,#28);
+#27 = CARTESIAN_POINT('',(-1.65,1.45,0.));
+#28 = VECTOR('',#29,1.);
+#29 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#30 = ORIENTED_EDGE('',*,*,#31,.T.);
+#31 = EDGE_CURVE('',#22,#32,#34,.T.);
+#32 = VERTEX_POINT('',#33);
+#33 = CARTESIAN_POINT('',(-1.65,1.45,2.5E-02));
+#34 = LINE('',#35,#36);
+#35 = CARTESIAN_POINT('',(-1.65,1.45,0.));
+#36 = VECTOR('',#37,1.);
+#37 = DIRECTION('',(0.,0.,1.));
+#38 = ORIENTED_EDGE('',*,*,#39,.F.);
+#39 = EDGE_CURVE('',#40,#32,#42,.T.);
+#40 = VERTEX_POINT('',#41);
+#41 = CARTESIAN_POINT('',(-1.65,-1.65,2.5E-02));
+#42 = LINE('',#43,#44);
+#43 = CARTESIAN_POINT('',(-1.65,1.96875,2.5E-02));
+#44 = VECTOR('',#45,1.);
+#45 = DIRECTION('',(2.22044604925E-16,1.,0.));
+#46 = ORIENTED_EDGE('',*,*,#47,.F.);
+#47 = EDGE_CURVE('',#24,#40,#48,.T.);
+#48 = LINE('',#49,#50);
+#49 = CARTESIAN_POINT('',(-1.65,-1.65,0.));
+#50 = VECTOR('',#51,1.);
+#51 = DIRECTION('',(0.,0.,1.));
+#52 = PLANE('',#53);
+#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56);
+#54 = CARTESIAN_POINT('',(-1.65,1.45,0.));
+#55 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#56 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#57 = ADVANCED_FACE('',(#58),#91,.F.);
+#58 = FACE_BOUND('',#59,.F.);
+#59 = EDGE_LOOP('',(#60,#61,#69,#77,#85));
+#60 = ORIENTED_EDGE('',*,*,#21,.T.);
+#61 = ORIENTED_EDGE('',*,*,#62,.T.);
+#62 = EDGE_CURVE('',#24,#63,#65,.T.);
+#63 = VERTEX_POINT('',#64);
+#64 = CARTESIAN_POINT('',(1.65,-1.65,0.));
+#65 = LINE('',#66,#67);
+#66 = CARTESIAN_POINT('',(-1.65,-1.65,0.));
+#67 = VECTOR('',#68,1.);
+#68 = DIRECTION('',(1.,-2.893308488417E-16,0.));
+#69 = ORIENTED_EDGE('',*,*,#70,.T.);
+#70 = EDGE_CURVE('',#63,#71,#73,.T.);
+#71 = VERTEX_POINT('',#72);
+#72 = CARTESIAN_POINT('',(1.65,1.65,0.));
+#73 = LINE('',#74,#75);
+#74 = CARTESIAN_POINT('',(1.65,-1.65,0.));
+#75 = VECTOR('',#76,1.);
+#76 = DIRECTION('',(2.22044604925E-16,1.,0.));
+#77 = ORIENTED_EDGE('',*,*,#78,.T.);
+#78 = EDGE_CURVE('',#71,#79,#81,.T.);
+#79 = VERTEX_POINT('',#80);
+#80 = CARTESIAN_POINT('',(-1.45,1.65,0.));
+#81 = LINE('',#82,#83);
+#82 = CARTESIAN_POINT('',(1.65,1.65,0.));
+#83 = VECTOR('',#84,1.);
+#84 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#85 = ORIENTED_EDGE('',*,*,#86,.T.);
+#86 = EDGE_CURVE('',#79,#22,#87,.T.);
+#87 = LINE('',#88,#89);
+#88 = CARTESIAN_POINT('',(-1.45,1.65,0.));
+#89 = VECTOR('',#90,1.);
+#90 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));
+#91 = PLANE('',#92);
+#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95);
+#93 = CARTESIAN_POINT('',(1.540902081412E-02,-1.540902081412E-02,0.));
+#94 = DIRECTION('',(0.,0.,1.));
+#95 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#96 = ADVANCED_FACE('',(#97),#115,.F.);
+#97 = FACE_BOUND('',#98,.F.);
+#98 = EDGE_LOOP('',(#99,#100,#101,#109));
+#99 = ORIENTED_EDGE('',*,*,#62,.F.);
+#100 = ORIENTED_EDGE('',*,*,#47,.T.);
+#101 = ORIENTED_EDGE('',*,*,#102,.F.);
+#102 = EDGE_CURVE('',#103,#40,#105,.T.);
+#103 = VERTEX_POINT('',#104);
+#104 = CARTESIAN_POINT('',(1.65,-1.65,2.5E-02));
+#105 = LINE('',#106,#107);
+#106 = CARTESIAN_POINT('',(-2.06875,-1.65,2.5E-02));
+#107 = VECTOR('',#108,1.);
+#108 = DIRECTION('',(-1.,2.893308488417E-16,0.));
+#109 = ORIENTED_EDGE('',*,*,#110,.F.);
+#110 = EDGE_CURVE('',#63,#103,#111,.T.);
+#111 = LINE('',#112,#113);
+#112 = CARTESIAN_POINT('',(1.65,-1.65,0.));
+#113 = VECTOR('',#114,1.);
+#114 = DIRECTION('',(0.,0.,1.));
+#115 = PLANE('',#116);
+#116 = AXIS2_PLACEMENT_3D('',#117,#118,#119);
+#117 = CARTESIAN_POINT('',(-1.65,-1.65,0.));
+#118 = DIRECTION('',(2.893308488417E-16,1.,0.));
+#119 = DIRECTION('',(1.,-2.893308488417E-16,0.));
+#120 = ADVANCED_FACE('',(#121,#1211),#1237,.F.);
+#121 = FACE_BOUND('',#122,.F.);
+#122 = EDGE_LOOP('',(#123,#133,#141,#149,#158,#166,#174,#182,#191,#199,
+#207,#215,#224,#232,#240,#248,#257,#265,#273,#281,#290,#298,#306,
+#314,#323,#331,#339,#347,#356,#364,#372,#380,#389,#397,#405,#413,
+#421,#430,#438,#446,#454,#463,#471,#479,#487,#496,#504,#512,#520,
+#529,#537,#545,#553,#562,#570,#578,#586,#595,#603,#611,#619,#628,
+#636,#644,#652,#661,#669,#677,#685,#693,#702,#710,#718,#726,#735,
+#743,#751,#759,#768,#776,#784,#792,#801,#809,#817,#825,#834,#842,
+#850,#858,#867,#875,#883,#891,#900,#908,#916,#924,#933,#941,#949,
+#957,#965,#974,#982,#990,#998,#1007,#1015,#1023,#1031,#1040,#1048,
+#1056,#1064,#1073,#1081,#1089,#1097,#1106,#1114,#1122,#1130,#1139,
+#1147,#1155,#1163,#1172,#1180,#1188,#1196,#1205));
+#123 = ORIENTED_EDGE('',*,*,#124,.F.);
+#124 = EDGE_CURVE('',#125,#127,#129,.T.);
+#125 = VERTEX_POINT('',#126);
+#126 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#127 = VERTEX_POINT('',#128);
+#128 = CARTESIAN_POINT('',(-1.875,2.4875,2.5E-02));
+#129 = LINE('',#130,#131);
+#130 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#131 = VECTOR('',#132,1.);
+#132 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#133 = ORIENTED_EDGE('',*,*,#134,.T.);
+#134 = EDGE_CURVE('',#125,#135,#137,.T.);
+#135 = VERTEX_POINT('',#136);
+#136 = CARTESIAN_POINT('',(-2.4875,1.875,2.5E-02));
+#137 = LINE('',#138,#139);
+#138 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#139 = VECTOR('',#140,1.);
+#140 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#141 = ORIENTED_EDGE('',*,*,#142,.T.);
+#142 = EDGE_CURVE('',#135,#143,#145,.T.);
+#143 = VERTEX_POINT('',#144);
+#144 = CARTESIAN_POINT('',(-2.225,1.875,2.5E-02));
+#145 = LINE('',#146,#147);
+#146 = CARTESIAN_POINT('',(-2.35625,1.875,2.5E-02));
+#147 = VECTOR('',#148,1.);
+#148 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#149 = ORIENTED_EDGE('',*,*,#150,.T.);
+#150 = EDGE_CURVE('',#143,#151,#153,.T.);
+#151 = VERTEX_POINT('',#152);
+#152 = CARTESIAN_POINT('',(-2.225,1.625,2.5E-02));
+#153 = CIRCLE('',#154,0.125);
+#154 = AXIS2_PLACEMENT_3D('',#155,#156,#157);
+#155 = CARTESIAN_POINT('',(-2.225,1.75,2.5E-02));
+#156 = DIRECTION('',(-0.,0.,-1.));
+#157 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#158 = ORIENTED_EDGE('',*,*,#159,.T.);
+#159 = EDGE_CURVE('',#151,#160,#162,.T.);
+#160 = VERTEX_POINT('',#161);
+#161 = CARTESIAN_POINT('',(-2.4875,1.625,2.5E-02));
+#162 = LINE('',#163,#164);
+#163 = CARTESIAN_POINT('',(-2.49375,1.625,2.5E-02));
+#164 = VECTOR('',#165,1.);
+#165 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#166 = ORIENTED_EDGE('',*,*,#167,.T.);
+#167 = EDGE_CURVE('',#160,#168,#170,.T.);
+#168 = VERTEX_POINT('',#169);
+#169 = CARTESIAN_POINT('',(-2.4875,1.375,2.5E-02));
+#170 = LINE('',#171,#172);
+#171 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#172 = VECTOR('',#173,1.);
+#173 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#174 = ORIENTED_EDGE('',*,*,#175,.T.);
+#175 = EDGE_CURVE('',#168,#176,#178,.T.);
+#176 = VERTEX_POINT('',#177);
+#177 = CARTESIAN_POINT('',(-2.225,1.375,2.5E-02));
+#178 = LINE('',#179,#180);
+#179 = CARTESIAN_POINT('',(-2.35625,1.375,2.5E-02));
+#180 = VECTOR('',#181,1.);
+#181 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#182 = ORIENTED_EDGE('',*,*,#183,.T.);
+#183 = EDGE_CURVE('',#176,#184,#186,.T.);
+#184 = VERTEX_POINT('',#185);
+#185 = CARTESIAN_POINT('',(-2.225,1.125,2.5E-02));
+#186 = CIRCLE('',#187,0.125);
+#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190);
+#188 = CARTESIAN_POINT('',(-2.225,1.25,2.5E-02));
+#189 = DIRECTION('',(-0.,0.,-1.));
+#190 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#191 = ORIENTED_EDGE('',*,*,#192,.T.);
+#192 = EDGE_CURVE('',#184,#193,#195,.T.);
+#193 = VERTEX_POINT('',#194);
+#194 = CARTESIAN_POINT('',(-2.4875,1.125,2.5E-02));
+#195 = LINE('',#196,#197);
+#196 = CARTESIAN_POINT('',(-2.49375,1.125,2.5E-02));
+#197 = VECTOR('',#198,1.);
+#198 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#199 = ORIENTED_EDGE('',*,*,#200,.T.);
+#200 = EDGE_CURVE('',#193,#201,#203,.T.);
+#201 = VERTEX_POINT('',#202);
+#202 = CARTESIAN_POINT('',(-2.4875,0.875,2.5E-02));
+#203 = LINE('',#204,#205);
+#204 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#205 = VECTOR('',#206,1.);
+#206 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#207 = ORIENTED_EDGE('',*,*,#208,.T.);
+#208 = EDGE_CURVE('',#201,#209,#211,.T.);
+#209 = VERTEX_POINT('',#210);
+#210 = CARTESIAN_POINT('',(-2.225,0.875,2.5E-02));
+#211 = LINE('',#212,#213);
+#212 = CARTESIAN_POINT('',(-2.35625,0.875,2.5E-02));
+#213 = VECTOR('',#214,1.);
+#214 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#215 = ORIENTED_EDGE('',*,*,#216,.T.);
+#216 = EDGE_CURVE('',#209,#217,#219,.T.);
+#217 = VERTEX_POINT('',#218);
+#218 = CARTESIAN_POINT('',(-2.225,0.625,2.5E-02));
+#219 = CIRCLE('',#220,0.125);
+#220 = AXIS2_PLACEMENT_3D('',#221,#222,#223);
+#221 = CARTESIAN_POINT('',(-2.225,0.75,2.5E-02));
+#222 = DIRECTION('',(-0.,0.,-1.));
+#223 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#224 = ORIENTED_EDGE('',*,*,#225,.T.);
+#225 = EDGE_CURVE('',#217,#226,#228,.T.);
+#226 = VERTEX_POINT('',#227);
+#227 = CARTESIAN_POINT('',(-2.4875,0.625,2.5E-02));
+#228 = LINE('',#229,#230);
+#229 = CARTESIAN_POINT('',(-2.49375,0.625,2.5E-02));
+#230 = VECTOR('',#231,1.);
+#231 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#232 = ORIENTED_EDGE('',*,*,#233,.T.);
+#233 = EDGE_CURVE('',#226,#234,#236,.T.);
+#234 = VERTEX_POINT('',#235);
+#235 = CARTESIAN_POINT('',(-2.4875,0.375,2.5E-02));
+#236 = LINE('',#237,#238);
+#237 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#238 = VECTOR('',#239,1.);
+#239 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#240 = ORIENTED_EDGE('',*,*,#241,.T.);
+#241 = EDGE_CURVE('',#234,#242,#244,.T.);
+#242 = VERTEX_POINT('',#243);
+#243 = CARTESIAN_POINT('',(-2.225,0.375,2.5E-02));
+#244 = LINE('',#245,#246);
+#245 = CARTESIAN_POINT('',(-2.35625,0.375,2.5E-02));
+#246 = VECTOR('',#247,1.);
+#247 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#248 = ORIENTED_EDGE('',*,*,#249,.T.);
+#249 = EDGE_CURVE('',#242,#250,#252,.T.);
+#250 = VERTEX_POINT('',#251);
+#251 = CARTESIAN_POINT('',(-2.225,0.125,2.5E-02));
+#252 = CIRCLE('',#253,0.125);
+#253 = AXIS2_PLACEMENT_3D('',#254,#255,#256);
+#254 = CARTESIAN_POINT('',(-2.225,0.25,2.5E-02));
+#255 = DIRECTION('',(-0.,0.,-1.));
+#256 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#257 = ORIENTED_EDGE('',*,*,#258,.T.);
+#258 = EDGE_CURVE('',#250,#259,#261,.T.);
+#259 = VERTEX_POINT('',#260);
+#260 = CARTESIAN_POINT('',(-2.4875,0.125,2.5E-02));
+#261 = LINE('',#262,#263);
+#262 = CARTESIAN_POINT('',(-2.49375,0.125,2.5E-02));
+#263 = VECTOR('',#264,1.);
+#264 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#265 = ORIENTED_EDGE('',*,*,#266,.T.);
+#266 = EDGE_CURVE('',#259,#267,#269,.T.);
+#267 = VERTEX_POINT('',#268);
+#268 = CARTESIAN_POINT('',(-2.4875,-0.125,2.5E-02));
+#269 = LINE('',#270,#271);
+#270 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#271 = VECTOR('',#272,1.);
+#272 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#273 = ORIENTED_EDGE('',*,*,#274,.T.);
+#274 = EDGE_CURVE('',#267,#275,#277,.T.);
+#275 = VERTEX_POINT('',#276);
+#276 = CARTESIAN_POINT('',(-2.225,-0.125,2.5E-02));
+#277 = LINE('',#278,#279);
+#278 = CARTESIAN_POINT('',(-2.35625,-0.125,2.5E-02));
+#279 = VECTOR('',#280,1.);
+#280 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#281 = ORIENTED_EDGE('',*,*,#282,.T.);
+#282 = EDGE_CURVE('',#275,#283,#285,.T.);
+#283 = VERTEX_POINT('',#284);
+#284 = CARTESIAN_POINT('',(-2.225,-0.375,2.5E-02));
+#285 = CIRCLE('',#286,0.125);
+#286 = AXIS2_PLACEMENT_3D('',#287,#288,#289);
+#287 = CARTESIAN_POINT('',(-2.225,-0.25,2.5E-02));
+#288 = DIRECTION('',(-0.,0.,-1.));
+#289 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#290 = ORIENTED_EDGE('',*,*,#291,.T.);
+#291 = EDGE_CURVE('',#283,#292,#294,.T.);
+#292 = VERTEX_POINT('',#293);
+#293 = CARTESIAN_POINT('',(-2.4875,-0.375,2.5E-02));
+#294 = LINE('',#295,#296);
+#295 = CARTESIAN_POINT('',(-2.49375,-0.375,2.5E-02));
+#296 = VECTOR('',#297,1.);
+#297 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#298 = ORIENTED_EDGE('',*,*,#299,.T.);
+#299 = EDGE_CURVE('',#292,#300,#302,.T.);
+#300 = VERTEX_POINT('',#301);
+#301 = CARTESIAN_POINT('',(-2.4875,-0.625,2.5E-02));
+#302 = LINE('',#303,#304);
+#303 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#304 = VECTOR('',#305,1.);
+#305 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#306 = ORIENTED_EDGE('',*,*,#307,.T.);
+#307 = EDGE_CURVE('',#300,#308,#310,.T.);
+#308 = VERTEX_POINT('',#309);
+#309 = CARTESIAN_POINT('',(-2.225,-0.625,2.5E-02));
+#310 = LINE('',#311,#312);
+#311 = CARTESIAN_POINT('',(-2.35625,-0.625,2.5E-02));
+#312 = VECTOR('',#313,1.);
+#313 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#314 = ORIENTED_EDGE('',*,*,#315,.T.);
+#315 = EDGE_CURVE('',#308,#316,#318,.T.);
+#316 = VERTEX_POINT('',#317);
+#317 = CARTESIAN_POINT('',(-2.225,-0.875,2.5E-02));
+#318 = CIRCLE('',#319,0.125);
+#319 = AXIS2_PLACEMENT_3D('',#320,#321,#322);
+#320 = CARTESIAN_POINT('',(-2.225,-0.75,2.5E-02));
+#321 = DIRECTION('',(-0.,0.,-1.));
+#322 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#323 = ORIENTED_EDGE('',*,*,#324,.T.);
+#324 = EDGE_CURVE('',#316,#325,#327,.T.);
+#325 = VERTEX_POINT('',#326);
+#326 = CARTESIAN_POINT('',(-2.4875,-0.875,2.5E-02));
+#327 = LINE('',#328,#329);
+#328 = CARTESIAN_POINT('',(-2.49375,-0.875,2.5E-02));
+#329 = VECTOR('',#330,1.);
+#330 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#331 = ORIENTED_EDGE('',*,*,#332,.T.);
+#332 = EDGE_CURVE('',#325,#333,#335,.T.);
+#333 = VERTEX_POINT('',#334);
+#334 = CARTESIAN_POINT('',(-2.4875,-1.125,2.5E-02));
+#335 = LINE('',#336,#337);
+#336 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#337 = VECTOR('',#338,1.);
+#338 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#339 = ORIENTED_EDGE('',*,*,#340,.T.);
+#340 = EDGE_CURVE('',#333,#341,#343,.T.);
+#341 = VERTEX_POINT('',#342);
+#342 = CARTESIAN_POINT('',(-2.225,-1.125,2.5E-02));
+#343 = LINE('',#344,#345);
+#344 = CARTESIAN_POINT('',(-2.35625,-1.125,2.5E-02));
+#345 = VECTOR('',#346,1.);
+#346 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#347 = ORIENTED_EDGE('',*,*,#348,.T.);
+#348 = EDGE_CURVE('',#341,#349,#351,.T.);
+#349 = VERTEX_POINT('',#350);
+#350 = CARTESIAN_POINT('',(-2.225,-1.375,2.5E-02));
+#351 = CIRCLE('',#352,0.125);
+#352 = AXIS2_PLACEMENT_3D('',#353,#354,#355);
+#353 = CARTESIAN_POINT('',(-2.225,-1.25,2.5E-02));
+#354 = DIRECTION('',(-0.,0.,-1.));
+#355 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#356 = ORIENTED_EDGE('',*,*,#357,.T.);
+#357 = EDGE_CURVE('',#349,#358,#360,.T.);
+#358 = VERTEX_POINT('',#359);
+#359 = CARTESIAN_POINT('',(-2.4875,-1.375,2.5E-02));
+#360 = LINE('',#361,#362);
+#361 = CARTESIAN_POINT('',(-2.49375,-1.375,2.5E-02));
+#362 = VECTOR('',#363,1.);
+#363 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#364 = ORIENTED_EDGE('',*,*,#365,.T.);
+#365 = EDGE_CURVE('',#358,#366,#368,.T.);
+#366 = VERTEX_POINT('',#367);
+#367 = CARTESIAN_POINT('',(-2.4875,-1.625,2.5E-02));
+#368 = LINE('',#369,#370);
+#369 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#370 = VECTOR('',#371,1.);
+#371 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#372 = ORIENTED_EDGE('',*,*,#373,.T.);
+#373 = EDGE_CURVE('',#366,#374,#376,.T.);
+#374 = VERTEX_POINT('',#375);
+#375 = CARTESIAN_POINT('',(-2.225,-1.625,2.5E-02));
+#376 = LINE('',#377,#378);
+#377 = CARTESIAN_POINT('',(-2.35625,-1.625,2.5E-02));
+#378 = VECTOR('',#379,1.);
+#379 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#380 = ORIENTED_EDGE('',*,*,#381,.T.);
+#381 = EDGE_CURVE('',#374,#382,#384,.T.);
+#382 = VERTEX_POINT('',#383);
+#383 = CARTESIAN_POINT('',(-2.225,-1.875,2.5E-02));
+#384 = CIRCLE('',#385,0.125);
+#385 = AXIS2_PLACEMENT_3D('',#386,#387,#388);
+#386 = CARTESIAN_POINT('',(-2.225,-1.75,2.5E-02));
+#387 = DIRECTION('',(-0.,0.,-1.));
+#388 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#389 = ORIENTED_EDGE('',*,*,#390,.T.);
+#390 = EDGE_CURVE('',#382,#391,#393,.T.);
+#391 = VERTEX_POINT('',#392);
+#392 = CARTESIAN_POINT('',(-2.4875,-1.875,2.5E-02));
+#393 = LINE('',#394,#395);
+#394 = CARTESIAN_POINT('',(-2.49375,-1.875,2.5E-02));
+#395 = VECTOR('',#396,1.);
+#396 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#397 = ORIENTED_EDGE('',*,*,#398,.T.);
+#398 = EDGE_CURVE('',#391,#399,#401,.T.);
+#399 = VERTEX_POINT('',#400);
+#400 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#401 = LINE('',#402,#403);
+#402 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#403 = VECTOR('',#404,1.);
+#404 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#405 = ORIENTED_EDGE('',*,*,#406,.T.);
+#406 = EDGE_CURVE('',#399,#407,#409,.T.);
+#407 = VERTEX_POINT('',#408);
+#408 = CARTESIAN_POINT('',(-1.875,-2.4875,2.5E-02));
+#409 = LINE('',#410,#411);
+#410 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#411 = VECTOR('',#412,1.);
+#412 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#413 = ORIENTED_EDGE('',*,*,#414,.T.);
+#414 = EDGE_CURVE('',#407,#415,#417,.T.);
+#415 = VERTEX_POINT('',#416);
+#416 = CARTESIAN_POINT('',(-1.875,-2.225,2.5E-02));
+#417 = LINE('',#418,#419);
+#418 = CARTESIAN_POINT('',(-1.875,0.13125,2.5E-02));
+#419 = VECTOR('',#420,1.);
+#420 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#421 = ORIENTED_EDGE('',*,*,#422,.T.);
+#422 = EDGE_CURVE('',#415,#423,#425,.T.);
+#423 = VERTEX_POINT('',#424);
+#424 = CARTESIAN_POINT('',(-1.625,-2.225,2.5E-02));
+#425 = CIRCLE('',#426,0.125);
+#426 = AXIS2_PLACEMENT_3D('',#427,#428,#429);
+#427 = CARTESIAN_POINT('',(-1.75,-2.225,2.5E-02));
+#428 = DIRECTION('',(0.,-0.,-1.));
+#429 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#430 = ORIENTED_EDGE('',*,*,#431,.T.);
+#431 = EDGE_CURVE('',#423,#432,#434,.T.);
+#432 = VERTEX_POINT('',#433);
+#433 = CARTESIAN_POINT('',(-1.625,-2.4875,2.5E-02));
+#434 = LINE('',#435,#436);
+#435 = CARTESIAN_POINT('',(-1.625,-6.25E-03,2.5E-02));
+#436 = VECTOR('',#437,1.);
+#437 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#438 = ORIENTED_EDGE('',*,*,#439,.T.);
+#439 = EDGE_CURVE('',#432,#440,#442,.T.);
+#440 = VERTEX_POINT('',#441);
+#441 = CARTESIAN_POINT('',(-1.375,-2.4875,2.5E-02));
+#442 = LINE('',#443,#444);
+#443 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#444 = VECTOR('',#445,1.);
+#445 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#446 = ORIENTED_EDGE('',*,*,#447,.T.);
+#447 = EDGE_CURVE('',#440,#448,#450,.T.);
+#448 = VERTEX_POINT('',#449);
+#449 = CARTESIAN_POINT('',(-1.375,-2.225,2.5E-02));
+#450 = LINE('',#451,#452);
+#451 = CARTESIAN_POINT('',(-1.375,0.13125,2.5E-02));
+#452 = VECTOR('',#453,1.);
+#453 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#454 = ORIENTED_EDGE('',*,*,#455,.T.);
+#455 = EDGE_CURVE('',#448,#456,#458,.T.);
+#456 = VERTEX_POINT('',#457);
+#457 = CARTESIAN_POINT('',(-1.125,-2.225,2.5E-02));
+#458 = CIRCLE('',#459,0.125);
+#459 = AXIS2_PLACEMENT_3D('',#460,#461,#462);
+#460 = CARTESIAN_POINT('',(-1.25,-2.225,2.5E-02));
+#461 = DIRECTION('',(0.,-0.,-1.));
+#462 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#463 = ORIENTED_EDGE('',*,*,#464,.T.);
+#464 = EDGE_CURVE('',#456,#465,#467,.T.);
+#465 = VERTEX_POINT('',#466);
+#466 = CARTESIAN_POINT('',(-1.125,-2.4875,2.5E-02));
+#467 = LINE('',#468,#469);
+#468 = CARTESIAN_POINT('',(-1.125,-6.25E-03,2.5E-02));
+#469 = VECTOR('',#470,1.);
+#470 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#471 = ORIENTED_EDGE('',*,*,#472,.T.);
+#472 = EDGE_CURVE('',#465,#473,#475,.T.);
+#473 = VERTEX_POINT('',#474);
+#474 = CARTESIAN_POINT('',(-0.875,-2.4875,2.5E-02));
+#475 = LINE('',#476,#477);
+#476 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#477 = VECTOR('',#478,1.);
+#478 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#479 = ORIENTED_EDGE('',*,*,#480,.T.);
+#480 = EDGE_CURVE('',#473,#481,#483,.T.);
+#481 = VERTEX_POINT('',#482);
+#482 = CARTESIAN_POINT('',(-0.875,-2.225,2.5E-02));
+#483 = LINE('',#484,#485);
+#484 = CARTESIAN_POINT('',(-0.875,0.13125,2.5E-02));
+#485 = VECTOR('',#486,1.);
+#486 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#487 = ORIENTED_EDGE('',*,*,#488,.T.);
+#488 = EDGE_CURVE('',#481,#489,#491,.T.);
+#489 = VERTEX_POINT('',#490);
+#490 = CARTESIAN_POINT('',(-0.625,-2.225,2.5E-02));
+#491 = CIRCLE('',#492,0.125);
+#492 = AXIS2_PLACEMENT_3D('',#493,#494,#495);
+#493 = CARTESIAN_POINT('',(-0.75,-2.225,2.5E-02));
+#494 = DIRECTION('',(0.,-0.,-1.));
+#495 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#496 = ORIENTED_EDGE('',*,*,#497,.T.);
+#497 = EDGE_CURVE('',#489,#498,#500,.T.);
+#498 = VERTEX_POINT('',#499);
+#499 = CARTESIAN_POINT('',(-0.625,-2.4875,2.5E-02));
+#500 = LINE('',#501,#502);
+#501 = CARTESIAN_POINT('',(-0.625,-6.25E-03,2.5E-02));
+#502 = VECTOR('',#503,1.);
+#503 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#504 = ORIENTED_EDGE('',*,*,#505,.T.);
+#505 = EDGE_CURVE('',#498,#506,#508,.T.);
+#506 = VERTEX_POINT('',#507);
+#507 = CARTESIAN_POINT('',(-0.375,-2.4875,2.5E-02));
+#508 = LINE('',#509,#510);
+#509 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#510 = VECTOR('',#511,1.);
+#511 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#512 = ORIENTED_EDGE('',*,*,#513,.T.);
+#513 = EDGE_CURVE('',#506,#514,#516,.T.);
+#514 = VERTEX_POINT('',#515);
+#515 = CARTESIAN_POINT('',(-0.375,-2.225,2.5E-02));
+#516 = LINE('',#517,#518);
+#517 = CARTESIAN_POINT('',(-0.375,0.13125,2.5E-02));
+#518 = VECTOR('',#519,1.);
+#519 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#520 = ORIENTED_EDGE('',*,*,#521,.T.);
+#521 = EDGE_CURVE('',#514,#522,#524,.T.);
+#522 = VERTEX_POINT('',#523);
+#523 = CARTESIAN_POINT('',(-0.125,-2.225,2.5E-02));
+#524 = CIRCLE('',#525,0.125);
+#525 = AXIS2_PLACEMENT_3D('',#526,#527,#528);
+#526 = CARTESIAN_POINT('',(-0.25,-2.225,2.5E-02));
+#527 = DIRECTION('',(0.,-0.,-1.));
+#528 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#529 = ORIENTED_EDGE('',*,*,#530,.T.);
+#530 = EDGE_CURVE('',#522,#531,#533,.T.);
+#531 = VERTEX_POINT('',#532);
+#532 = CARTESIAN_POINT('',(-0.125,-2.4875,2.5E-02));
+#533 = LINE('',#534,#535);
+#534 = CARTESIAN_POINT('',(-0.125,-6.250000000001E-03,2.5E-02));
+#535 = VECTOR('',#536,1.);
+#536 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#537 = ORIENTED_EDGE('',*,*,#538,.T.);
+#538 = EDGE_CURVE('',#531,#539,#541,.T.);
+#539 = VERTEX_POINT('',#540);
+#540 = CARTESIAN_POINT('',(0.125,-2.4875,2.5E-02));
+#541 = LINE('',#542,#543);
+#542 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#543 = VECTOR('',#544,1.);
+#544 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#545 = ORIENTED_EDGE('',*,*,#546,.T.);
+#546 = EDGE_CURVE('',#539,#547,#549,.T.);
+#547 = VERTEX_POINT('',#548);
+#548 = CARTESIAN_POINT('',(0.125,-2.225,2.5E-02));
+#549 = LINE('',#550,#551);
+#550 = CARTESIAN_POINT('',(0.125,0.13125,2.5E-02));
+#551 = VECTOR('',#552,1.);
+#552 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#553 = ORIENTED_EDGE('',*,*,#554,.T.);
+#554 = EDGE_CURVE('',#547,#555,#557,.T.);
+#555 = VERTEX_POINT('',#556);
+#556 = CARTESIAN_POINT('',(0.375,-2.225,2.5E-02));
+#557 = CIRCLE('',#558,0.125);
+#558 = AXIS2_PLACEMENT_3D('',#559,#560,#561);
+#559 = CARTESIAN_POINT('',(0.25,-2.225,2.5E-02));
+#560 = DIRECTION('',(0.,-0.,-1.));
+#561 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#562 = ORIENTED_EDGE('',*,*,#563,.T.);
+#563 = EDGE_CURVE('',#555,#564,#566,.T.);
+#564 = VERTEX_POINT('',#565);
+#565 = CARTESIAN_POINT('',(0.375,-2.4875,2.5E-02));
+#566 = LINE('',#567,#568);
+#567 = CARTESIAN_POINT('',(0.375,-6.250000000001E-03,2.5E-02));
+#568 = VECTOR('',#569,1.);
+#569 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#570 = ORIENTED_EDGE('',*,*,#571,.T.);
+#571 = EDGE_CURVE('',#564,#572,#574,.T.);
+#572 = VERTEX_POINT('',#573);
+#573 = CARTESIAN_POINT('',(0.625,-2.4875,2.5E-02));
+#574 = LINE('',#575,#576);
+#575 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#576 = VECTOR('',#577,1.);
+#577 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#578 = ORIENTED_EDGE('',*,*,#579,.T.);
+#579 = EDGE_CURVE('',#572,#580,#582,.T.);
+#580 = VERTEX_POINT('',#581);
+#581 = CARTESIAN_POINT('',(0.625,-2.225,2.5E-02));
+#582 = LINE('',#583,#584);
+#583 = CARTESIAN_POINT('',(0.625,0.13125,2.5E-02));
+#584 = VECTOR('',#585,1.);
+#585 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#586 = ORIENTED_EDGE('',*,*,#587,.T.);
+#587 = EDGE_CURVE('',#580,#588,#590,.T.);
+#588 = VERTEX_POINT('',#589);
+#589 = CARTESIAN_POINT('',(0.875,-2.225,2.5E-02));
+#590 = CIRCLE('',#591,0.125);
+#591 = AXIS2_PLACEMENT_3D('',#592,#593,#594);
+#592 = CARTESIAN_POINT('',(0.75,-2.225,2.5E-02));
+#593 = DIRECTION('',(0.,-0.,-1.));
+#594 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#595 = ORIENTED_EDGE('',*,*,#596,.T.);
+#596 = EDGE_CURVE('',#588,#597,#599,.T.);
+#597 = VERTEX_POINT('',#598);
+#598 = CARTESIAN_POINT('',(0.875,-2.4875,2.5E-02));
+#599 = LINE('',#600,#601);
+#600 = CARTESIAN_POINT('',(0.875,-6.250000000001E-03,2.5E-02));
+#601 = VECTOR('',#602,1.);
+#602 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#603 = ORIENTED_EDGE('',*,*,#604,.T.);
+#604 = EDGE_CURVE('',#597,#605,#607,.T.);
+#605 = VERTEX_POINT('',#606);
+#606 = CARTESIAN_POINT('',(1.125,-2.4875,2.5E-02));
+#607 = LINE('',#608,#609);
+#608 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#609 = VECTOR('',#610,1.);
+#610 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#611 = ORIENTED_EDGE('',*,*,#612,.T.);
+#612 = EDGE_CURVE('',#605,#613,#615,.T.);
+#613 = VERTEX_POINT('',#614);
+#614 = CARTESIAN_POINT('',(1.125,-2.225,2.5E-02));
+#615 = LINE('',#616,#617);
+#616 = CARTESIAN_POINT('',(1.125,0.13125,2.5E-02));
+#617 = VECTOR('',#618,1.);
+#618 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#619 = ORIENTED_EDGE('',*,*,#620,.T.);
+#620 = EDGE_CURVE('',#613,#621,#623,.T.);
+#621 = VERTEX_POINT('',#622);
+#622 = CARTESIAN_POINT('',(1.375,-2.225,2.5E-02));
+#623 = CIRCLE('',#624,0.125);
+#624 = AXIS2_PLACEMENT_3D('',#625,#626,#627);
+#625 = CARTESIAN_POINT('',(1.25,-2.225,2.5E-02));
+#626 = DIRECTION('',(0.,-0.,-1.));
+#627 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#628 = ORIENTED_EDGE('',*,*,#629,.T.);
+#629 = EDGE_CURVE('',#621,#630,#632,.T.);
+#630 = VERTEX_POINT('',#631);
+#631 = CARTESIAN_POINT('',(1.375,-2.4875,2.5E-02));
+#632 = LINE('',#633,#634);
+#633 = CARTESIAN_POINT('',(1.375,-6.250000000001E-03,2.5E-02));
+#634 = VECTOR('',#635,1.);
+#635 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#636 = ORIENTED_EDGE('',*,*,#637,.T.);
+#637 = EDGE_CURVE('',#630,#638,#640,.T.);
+#638 = VERTEX_POINT('',#639);
+#639 = CARTESIAN_POINT('',(1.625,-2.4875,2.5E-02));
+#640 = LINE('',#641,#642);
+#641 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#642 = VECTOR('',#643,1.);
+#643 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#644 = ORIENTED_EDGE('',*,*,#645,.T.);
+#645 = EDGE_CURVE('',#638,#646,#648,.T.);
+#646 = VERTEX_POINT('',#647);
+#647 = CARTESIAN_POINT('',(1.625,-2.225,2.5E-02));
+#648 = LINE('',#649,#650);
+#649 = CARTESIAN_POINT('',(1.625,0.13125,2.5E-02));
+#650 = VECTOR('',#651,1.);
+#651 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#652 = ORIENTED_EDGE('',*,*,#653,.T.);
+#653 = EDGE_CURVE('',#646,#654,#656,.T.);
+#654 = VERTEX_POINT('',#655);
+#655 = CARTESIAN_POINT('',(1.875,-2.225,2.5E-02));
+#656 = CIRCLE('',#657,0.125);
+#657 = AXIS2_PLACEMENT_3D('',#658,#659,#660);
+#658 = CARTESIAN_POINT('',(1.75,-2.225,2.5E-02));
+#659 = DIRECTION('',(0.,-0.,-1.));
+#660 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#661 = ORIENTED_EDGE('',*,*,#662,.T.);
+#662 = EDGE_CURVE('',#654,#663,#665,.T.);
+#663 = VERTEX_POINT('',#664);
+#664 = CARTESIAN_POINT('',(1.875,-2.4875,2.5E-02));
+#665 = LINE('',#666,#667);
+#666 = CARTESIAN_POINT('',(1.875,-6.250000000001E-03,2.5E-02));
+#667 = VECTOR('',#668,1.);
+#668 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#669 = ORIENTED_EDGE('',*,*,#670,.T.);
+#670 = EDGE_CURVE('',#663,#671,#673,.T.);
+#671 = VERTEX_POINT('',#672);
+#672 = CARTESIAN_POINT('',(2.4875,-2.4875,2.5E-02));
+#673 = LINE('',#674,#675);
+#674 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#675 = VECTOR('',#676,1.);
+#676 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#677 = ORIENTED_EDGE('',*,*,#678,.F.);
+#678 = EDGE_CURVE('',#679,#671,#681,.T.);
+#679 = VERTEX_POINT('',#680);
+#680 = CARTESIAN_POINT('',(2.4875,-1.875,2.5E-02));
+#681 = LINE('',#682,#683);
+#682 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#683 = VECTOR('',#684,1.);
+#684 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#685 = ORIENTED_EDGE('',*,*,#686,.T.);
+#686 = EDGE_CURVE('',#679,#687,#689,.T.);
+#687 = VERTEX_POINT('',#688);
+#688 = CARTESIAN_POINT('',(2.225,-1.875,2.5E-02));
+#689 = LINE('',#690,#691);
+#690 = CARTESIAN_POINT('',(-0.13125,-1.875,2.5E-02));
+#691 = VECTOR('',#692,1.);
+#692 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#693 = ORIENTED_EDGE('',*,*,#694,.T.);
+#694 = EDGE_CURVE('',#687,#695,#697,.T.);
+#695 = VERTEX_POINT('',#696);
+#696 = CARTESIAN_POINT('',(2.225,-1.625,2.5E-02));
+#697 = CIRCLE('',#698,0.125);
+#698 = AXIS2_PLACEMENT_3D('',#699,#700,#701);
+#699 = CARTESIAN_POINT('',(2.225,-1.75,2.5E-02));
+#700 = DIRECTION('',(0.,0.,-1.));
+#701 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#702 = ORIENTED_EDGE('',*,*,#703,.T.);
+#703 = EDGE_CURVE('',#695,#704,#706,.T.);
+#704 = VERTEX_POINT('',#705);
+#705 = CARTESIAN_POINT('',(2.4875,-1.625,2.5E-02));
+#706 = LINE('',#707,#708);
+#707 = CARTESIAN_POINT('',(6.25E-03,-1.625,2.5E-02));
+#708 = VECTOR('',#709,1.);
+#709 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#710 = ORIENTED_EDGE('',*,*,#711,.F.);
+#711 = EDGE_CURVE('',#712,#704,#714,.T.);
+#712 = VERTEX_POINT('',#713);
+#713 = CARTESIAN_POINT('',(2.4875,-1.375,2.5E-02));
+#714 = LINE('',#715,#716);
+#715 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#716 = VECTOR('',#717,1.);
+#717 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#718 = ORIENTED_EDGE('',*,*,#719,.T.);
+#719 = EDGE_CURVE('',#712,#720,#722,.T.);
+#720 = VERTEX_POINT('',#721);
+#721 = CARTESIAN_POINT('',(2.225,-1.375,2.5E-02));
+#722 = LINE('',#723,#724);
+#723 = CARTESIAN_POINT('',(-0.13125,-1.375,2.5E-02));
+#724 = VECTOR('',#725,1.);
+#725 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#726 = ORIENTED_EDGE('',*,*,#727,.T.);
+#727 = EDGE_CURVE('',#720,#728,#730,.T.);
+#728 = VERTEX_POINT('',#729);
+#729 = CARTESIAN_POINT('',(2.225,-1.125,2.5E-02));
+#730 = CIRCLE('',#731,0.125);
+#731 = AXIS2_PLACEMENT_3D('',#732,#733,#734);
+#732 = CARTESIAN_POINT('',(2.225,-1.25,2.5E-02));
+#733 = DIRECTION('',(0.,0.,-1.));
+#734 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#735 = ORIENTED_EDGE('',*,*,#736,.T.);
+#736 = EDGE_CURVE('',#728,#737,#739,.T.);
+#737 = VERTEX_POINT('',#738);
+#738 = CARTESIAN_POINT('',(2.4875,-1.125,2.5E-02));
+#739 = LINE('',#740,#741);
+#740 = CARTESIAN_POINT('',(6.25E-03,-1.125,2.5E-02));
+#741 = VECTOR('',#742,1.);
+#742 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#743 = ORIENTED_EDGE('',*,*,#744,.F.);
+#744 = EDGE_CURVE('',#745,#737,#747,.T.);
+#745 = VERTEX_POINT('',#746);
+#746 = CARTESIAN_POINT('',(2.4875,-0.875,2.5E-02));
+#747 = LINE('',#748,#749);
+#748 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#749 = VECTOR('',#750,1.);
+#750 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#751 = ORIENTED_EDGE('',*,*,#752,.T.);
+#752 = EDGE_CURVE('',#745,#753,#755,.T.);
+#753 = VERTEX_POINT('',#754);
+#754 = CARTESIAN_POINT('',(2.225,-0.875,2.5E-02));
+#755 = LINE('',#756,#757);
+#756 = CARTESIAN_POINT('',(-0.13125,-0.875,2.5E-02));
+#757 = VECTOR('',#758,1.);
+#758 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#759 = ORIENTED_EDGE('',*,*,#760,.T.);
+#760 = EDGE_CURVE('',#753,#761,#763,.T.);
+#761 = VERTEX_POINT('',#762);
+#762 = CARTESIAN_POINT('',(2.225,-0.625,2.5E-02));
+#763 = CIRCLE('',#764,0.125);
+#764 = AXIS2_PLACEMENT_3D('',#765,#766,#767);
+#765 = CARTESIAN_POINT('',(2.225,-0.75,2.5E-02));
+#766 = DIRECTION('',(0.,0.,-1.));
+#767 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#768 = ORIENTED_EDGE('',*,*,#769,.T.);
+#769 = EDGE_CURVE('',#761,#770,#772,.T.);
+#770 = VERTEX_POINT('',#771);
+#771 = CARTESIAN_POINT('',(2.4875,-0.625,2.5E-02));
+#772 = LINE('',#773,#774);
+#773 = CARTESIAN_POINT('',(6.25E-03,-0.625,2.5E-02));
+#774 = VECTOR('',#775,1.);
+#775 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#776 = ORIENTED_EDGE('',*,*,#777,.F.);
+#777 = EDGE_CURVE('',#778,#770,#780,.T.);
+#778 = VERTEX_POINT('',#779);
+#779 = CARTESIAN_POINT('',(2.4875,-0.375,2.5E-02));
+#780 = LINE('',#781,#782);
+#781 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#782 = VECTOR('',#783,1.);
+#783 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#784 = ORIENTED_EDGE('',*,*,#785,.T.);
+#785 = EDGE_CURVE('',#778,#786,#788,.T.);
+#786 = VERTEX_POINT('',#787);
+#787 = CARTESIAN_POINT('',(2.225,-0.375,2.5E-02));
+#788 = LINE('',#789,#790);
+#789 = CARTESIAN_POINT('',(-0.13125,-0.375,2.5E-02));
+#790 = VECTOR('',#791,1.);
+#791 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#792 = ORIENTED_EDGE('',*,*,#793,.T.);
+#793 = EDGE_CURVE('',#786,#794,#796,.T.);
+#794 = VERTEX_POINT('',#795);
+#795 = CARTESIAN_POINT('',(2.225,-0.125,2.5E-02));
+#796 = CIRCLE('',#797,0.125);
+#797 = AXIS2_PLACEMENT_3D('',#798,#799,#800);
+#798 = CARTESIAN_POINT('',(2.225,-0.25,2.5E-02));
+#799 = DIRECTION('',(0.,0.,-1.));
+#800 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#801 = ORIENTED_EDGE('',*,*,#802,.T.);
+#802 = EDGE_CURVE('',#794,#803,#805,.T.);
+#803 = VERTEX_POINT('',#804);
+#804 = CARTESIAN_POINT('',(2.4875,-0.125,2.5E-02));
+#805 = LINE('',#806,#807);
+#806 = CARTESIAN_POINT('',(6.25E-03,-0.125,2.5E-02));
+#807 = VECTOR('',#808,1.);
+#808 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#809 = ORIENTED_EDGE('',*,*,#810,.F.);
+#810 = EDGE_CURVE('',#811,#803,#813,.T.);
+#811 = VERTEX_POINT('',#812);
+#812 = CARTESIAN_POINT('',(2.4875,0.125,2.5E-02));
+#813 = LINE('',#814,#815);
+#814 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#815 = VECTOR('',#816,1.);
+#816 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#817 = ORIENTED_EDGE('',*,*,#818,.T.);
+#818 = EDGE_CURVE('',#811,#819,#821,.T.);
+#819 = VERTEX_POINT('',#820);
+#820 = CARTESIAN_POINT('',(2.225,0.125,2.5E-02));
+#821 = LINE('',#822,#823);
+#822 = CARTESIAN_POINT('',(-0.13125,0.125,2.5E-02));
+#823 = VECTOR('',#824,1.);
+#824 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#825 = ORIENTED_EDGE('',*,*,#826,.T.);
+#826 = EDGE_CURVE('',#819,#827,#829,.T.);
+#827 = VERTEX_POINT('',#828);
+#828 = CARTESIAN_POINT('',(2.225,0.375,2.5E-02));
+#829 = CIRCLE('',#830,0.125);
+#830 = AXIS2_PLACEMENT_3D('',#831,#832,#833);
+#831 = CARTESIAN_POINT('',(2.225,0.25,2.5E-02));
+#832 = DIRECTION('',(0.,0.,-1.));
+#833 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#834 = ORIENTED_EDGE('',*,*,#835,.T.);
+#835 = EDGE_CURVE('',#827,#836,#838,.T.);
+#836 = VERTEX_POINT('',#837);
+#837 = CARTESIAN_POINT('',(2.4875,0.375,2.5E-02));
+#838 = LINE('',#839,#840);
+#839 = CARTESIAN_POINT('',(6.25E-03,0.375,2.5E-02));
+#840 = VECTOR('',#841,1.);
+#841 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#842 = ORIENTED_EDGE('',*,*,#843,.F.);
+#843 = EDGE_CURVE('',#844,#836,#846,.T.);
+#844 = VERTEX_POINT('',#845);
+#845 = CARTESIAN_POINT('',(2.4875,0.625,2.5E-02));
+#846 = LINE('',#847,#848);
+#847 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#848 = VECTOR('',#849,1.);
+#849 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#850 = ORIENTED_EDGE('',*,*,#851,.T.);
+#851 = EDGE_CURVE('',#844,#852,#854,.T.);
+#852 = VERTEX_POINT('',#853);
+#853 = CARTESIAN_POINT('',(2.225,0.625,2.5E-02));
+#854 = LINE('',#855,#856);
+#855 = CARTESIAN_POINT('',(-0.13125,0.625,2.5E-02));
+#856 = VECTOR('',#857,1.);
+#857 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#858 = ORIENTED_EDGE('',*,*,#859,.T.);
+#859 = EDGE_CURVE('',#852,#860,#862,.T.);
+#860 = VERTEX_POINT('',#861);
+#861 = CARTESIAN_POINT('',(2.225,0.875,2.5E-02));
+#862 = CIRCLE('',#863,0.125);
+#863 = AXIS2_PLACEMENT_3D('',#864,#865,#866);
+#864 = CARTESIAN_POINT('',(2.225,0.75,2.5E-02));
+#865 = DIRECTION('',(0.,0.,-1.));
+#866 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#867 = ORIENTED_EDGE('',*,*,#868,.T.);
+#868 = EDGE_CURVE('',#860,#869,#871,.T.);
+#869 = VERTEX_POINT('',#870);
+#870 = CARTESIAN_POINT('',(2.4875,0.875,2.5E-02));
+#871 = LINE('',#872,#873);
+#872 = CARTESIAN_POINT('',(6.25E-03,0.875,2.5E-02));
+#873 = VECTOR('',#874,1.);
+#874 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#875 = ORIENTED_EDGE('',*,*,#876,.F.);
+#876 = EDGE_CURVE('',#877,#869,#879,.T.);
+#877 = VERTEX_POINT('',#878);
+#878 = CARTESIAN_POINT('',(2.4875,1.125,2.5E-02));
+#879 = LINE('',#880,#881);
+#880 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#881 = VECTOR('',#882,1.);
+#882 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#883 = ORIENTED_EDGE('',*,*,#884,.T.);
+#884 = EDGE_CURVE('',#877,#885,#887,.T.);
+#885 = VERTEX_POINT('',#886);
+#886 = CARTESIAN_POINT('',(2.225,1.125,2.5E-02));
+#887 = LINE('',#888,#889);
+#888 = CARTESIAN_POINT('',(-0.13125,1.125,2.5E-02));
+#889 = VECTOR('',#890,1.);
+#890 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#891 = ORIENTED_EDGE('',*,*,#892,.T.);
+#892 = EDGE_CURVE('',#885,#893,#895,.T.);
+#893 = VERTEX_POINT('',#894);
+#894 = CARTESIAN_POINT('',(2.225,1.375,2.5E-02));
+#895 = CIRCLE('',#896,0.125);
+#896 = AXIS2_PLACEMENT_3D('',#897,#898,#899);
+#897 = CARTESIAN_POINT('',(2.225,1.25,2.5E-02));
+#898 = DIRECTION('',(0.,0.,-1.));
+#899 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#900 = ORIENTED_EDGE('',*,*,#901,.T.);
+#901 = EDGE_CURVE('',#893,#902,#904,.T.);
+#902 = VERTEX_POINT('',#903);
+#903 = CARTESIAN_POINT('',(2.4875,1.375,2.5E-02));
+#904 = LINE('',#905,#906);
+#905 = CARTESIAN_POINT('',(6.25E-03,1.375,2.5E-02));
+#906 = VECTOR('',#907,1.);
+#907 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#908 = ORIENTED_EDGE('',*,*,#909,.F.);
+#909 = EDGE_CURVE('',#910,#902,#912,.T.);
+#910 = VERTEX_POINT('',#911);
+#911 = CARTESIAN_POINT('',(2.4875,1.625,2.5E-02));
+#912 = LINE('',#913,#914);
+#913 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#914 = VECTOR('',#915,1.);
+#915 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#916 = ORIENTED_EDGE('',*,*,#917,.T.);
+#917 = EDGE_CURVE('',#910,#918,#920,.T.);
+#918 = VERTEX_POINT('',#919);
+#919 = CARTESIAN_POINT('',(2.225,1.625,2.5E-02));
+#920 = LINE('',#921,#922);
+#921 = CARTESIAN_POINT('',(-0.13125,1.625,2.5E-02));
+#922 = VECTOR('',#923,1.);
+#923 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#924 = ORIENTED_EDGE('',*,*,#925,.T.);
+#925 = EDGE_CURVE('',#918,#926,#928,.T.);
+#926 = VERTEX_POINT('',#927);
+#927 = CARTESIAN_POINT('',(2.225,1.875,2.5E-02));
+#928 = CIRCLE('',#929,0.125);
+#929 = AXIS2_PLACEMENT_3D('',#930,#931,#932);
+#930 = CARTESIAN_POINT('',(2.225,1.75,2.5E-02));
+#931 = DIRECTION('',(0.,0.,-1.));
+#932 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#933 = ORIENTED_EDGE('',*,*,#934,.T.);
+#934 = EDGE_CURVE('',#926,#935,#937,.T.);
+#935 = VERTEX_POINT('',#936);
+#936 = CARTESIAN_POINT('',(2.4875,1.875,2.5E-02));
+#937 = LINE('',#938,#939);
+#938 = CARTESIAN_POINT('',(6.250000000001E-03,1.875,2.5E-02));
+#939 = VECTOR('',#940,1.);
+#940 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#941 = ORIENTED_EDGE('',*,*,#942,.F.);
+#942 = EDGE_CURVE('',#943,#935,#945,.T.);
+#943 = VERTEX_POINT('',#944);
+#944 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#945 = LINE('',#946,#947);
+#946 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#947 = VECTOR('',#948,1.);
+#948 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#949 = ORIENTED_EDGE('',*,*,#950,.F.);
+#950 = EDGE_CURVE('',#951,#943,#953,.T.);
+#951 = VERTEX_POINT('',#952);
+#952 = CARTESIAN_POINT('',(1.875,2.4875,2.5E-02));
+#953 = LINE('',#954,#955);
+#954 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#955 = VECTOR('',#956,1.);
+#956 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#957 = ORIENTED_EDGE('',*,*,#958,.T.);
+#958 = EDGE_CURVE('',#951,#959,#961,.T.);
+#959 = VERTEX_POINT('',#960);
+#960 = CARTESIAN_POINT('',(1.875,2.225,2.5E-02));
+#961 = LINE('',#962,#963);
+#962 = CARTESIAN_POINT('',(1.875,2.35625,2.5E-02));
+#963 = VECTOR('',#964,1.);
+#964 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#965 = ORIENTED_EDGE('',*,*,#966,.T.);
+#966 = EDGE_CURVE('',#959,#967,#969,.T.);
+#967 = VERTEX_POINT('',#968);
+#968 = CARTESIAN_POINT('',(1.625,2.225,2.5E-02));
+#969 = CIRCLE('',#970,0.125);
+#970 = AXIS2_PLACEMENT_3D('',#971,#972,#973);
+#971 = CARTESIAN_POINT('',(1.75,2.225,2.5E-02));
+#972 = DIRECTION('',(0.,0.,-1.));
+#973 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#974 = ORIENTED_EDGE('',*,*,#975,.T.);
+#975 = EDGE_CURVE('',#967,#976,#978,.T.);
+#976 = VERTEX_POINT('',#977);
+#977 = CARTESIAN_POINT('',(1.625,2.4875,2.5E-02));
+#978 = LINE('',#979,#980);
+#979 = CARTESIAN_POINT('',(1.625,2.49375,2.5E-02));
+#980 = VECTOR('',#981,1.);
+#981 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#982 = ORIENTED_EDGE('',*,*,#983,.F.);
+#983 = EDGE_CURVE('',#984,#976,#986,.T.);
+#984 = VERTEX_POINT('',#985);
+#985 = CARTESIAN_POINT('',(1.375,2.4875,2.5E-02));
+#986 = LINE('',#987,#988);
+#987 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#988 = VECTOR('',#989,1.);
+#989 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#990 = ORIENTED_EDGE('',*,*,#991,.T.);
+#991 = EDGE_CURVE('',#984,#992,#994,.T.);
+#992 = VERTEX_POINT('',#993);
+#993 = CARTESIAN_POINT('',(1.375,2.225,2.5E-02));
+#994 = LINE('',#995,#996);
+#995 = CARTESIAN_POINT('',(1.375,2.35625,2.5E-02));
+#996 = VECTOR('',#997,1.);
+#997 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#998 = ORIENTED_EDGE('',*,*,#999,.T.);
+#999 = EDGE_CURVE('',#992,#1000,#1002,.T.);
+#1000 = VERTEX_POINT('',#1001);
+#1001 = CARTESIAN_POINT('',(1.125,2.225,2.5E-02));
+#1002 = CIRCLE('',#1003,0.125);
+#1003 = AXIS2_PLACEMENT_3D('',#1004,#1005,#1006);
+#1004 = CARTESIAN_POINT('',(1.25,2.225,2.5E-02));
+#1005 = DIRECTION('',(0.,0.,-1.));
+#1006 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1007 = ORIENTED_EDGE('',*,*,#1008,.T.);
+#1008 = EDGE_CURVE('',#1000,#1009,#1011,.T.);
+#1009 = VERTEX_POINT('',#1010);
+#1010 = CARTESIAN_POINT('',(1.125,2.4875,2.5E-02));
+#1011 = LINE('',#1012,#1013);
+#1012 = CARTESIAN_POINT('',(1.125,2.49375,2.5E-02));
+#1013 = VECTOR('',#1014,1.);
+#1014 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1015 = ORIENTED_EDGE('',*,*,#1016,.F.);
+#1016 = EDGE_CURVE('',#1017,#1009,#1019,.T.);
+#1017 = VERTEX_POINT('',#1018);
+#1018 = CARTESIAN_POINT('',(0.875,2.4875,2.5E-02));
+#1019 = LINE('',#1020,#1021);
+#1020 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1021 = VECTOR('',#1022,1.);
+#1022 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1023 = ORIENTED_EDGE('',*,*,#1024,.T.);
+#1024 = EDGE_CURVE('',#1017,#1025,#1027,.T.);
+#1025 = VERTEX_POINT('',#1026);
+#1026 = CARTESIAN_POINT('',(0.875,2.225,2.5E-02));
+#1027 = LINE('',#1028,#1029);
+#1028 = CARTESIAN_POINT('',(0.875,2.35625,2.5E-02));
+#1029 = VECTOR('',#1030,1.);
+#1030 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1031 = ORIENTED_EDGE('',*,*,#1032,.T.);
+#1032 = EDGE_CURVE('',#1025,#1033,#1035,.T.);
+#1033 = VERTEX_POINT('',#1034);
+#1034 = CARTESIAN_POINT('',(0.625,2.225,2.5E-02));
+#1035 = CIRCLE('',#1036,0.125);
+#1036 = AXIS2_PLACEMENT_3D('',#1037,#1038,#1039);
+#1037 = CARTESIAN_POINT('',(0.75,2.225,2.5E-02));
+#1038 = DIRECTION('',(0.,0.,-1.));
+#1039 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1040 = ORIENTED_EDGE('',*,*,#1041,.T.);
+#1041 = EDGE_CURVE('',#1033,#1042,#1044,.T.);
+#1042 = VERTEX_POINT('',#1043);
+#1043 = CARTESIAN_POINT('',(0.625,2.4875,2.5E-02));
+#1044 = LINE('',#1045,#1046);
+#1045 = CARTESIAN_POINT('',(0.625,2.49375,2.5E-02));
+#1046 = VECTOR('',#1047,1.);
+#1047 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1048 = ORIENTED_EDGE('',*,*,#1049,.F.);
+#1049 = EDGE_CURVE('',#1050,#1042,#1052,.T.);
+#1050 = VERTEX_POINT('',#1051);
+#1051 = CARTESIAN_POINT('',(0.375,2.4875,2.5E-02));
+#1052 = LINE('',#1053,#1054);
+#1053 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1054 = VECTOR('',#1055,1.);
+#1055 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1056 = ORIENTED_EDGE('',*,*,#1057,.T.);
+#1057 = EDGE_CURVE('',#1050,#1058,#1060,.T.);
+#1058 = VERTEX_POINT('',#1059);
+#1059 = CARTESIAN_POINT('',(0.375,2.225,2.5E-02));
+#1060 = LINE('',#1061,#1062);
+#1061 = CARTESIAN_POINT('',(0.375,2.35625,2.5E-02));
+#1062 = VECTOR('',#1063,1.);
+#1063 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1064 = ORIENTED_EDGE('',*,*,#1065,.T.);
+#1065 = EDGE_CURVE('',#1058,#1066,#1068,.T.);
+#1066 = VERTEX_POINT('',#1067);
+#1067 = CARTESIAN_POINT('',(0.125,2.225,2.5E-02));
+#1068 = CIRCLE('',#1069,0.125);
+#1069 = AXIS2_PLACEMENT_3D('',#1070,#1071,#1072);
+#1070 = CARTESIAN_POINT('',(0.25,2.225,2.5E-02));
+#1071 = DIRECTION('',(0.,0.,-1.));
+#1072 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1073 = ORIENTED_EDGE('',*,*,#1074,.T.);
+#1074 = EDGE_CURVE('',#1066,#1075,#1077,.T.);
+#1075 = VERTEX_POINT('',#1076);
+#1076 = CARTESIAN_POINT('',(0.125,2.4875,2.5E-02));
+#1077 = LINE('',#1078,#1079);
+#1078 = CARTESIAN_POINT('',(0.125,2.49375,2.5E-02));
+#1079 = VECTOR('',#1080,1.);
+#1080 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1081 = ORIENTED_EDGE('',*,*,#1082,.F.);
+#1082 = EDGE_CURVE('',#1083,#1075,#1085,.T.);
+#1083 = VERTEX_POINT('',#1084);
+#1084 = CARTESIAN_POINT('',(-0.125,2.4875,2.5E-02));
+#1085 = LINE('',#1086,#1087);
+#1086 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1087 = VECTOR('',#1088,1.);
+#1088 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1089 = ORIENTED_EDGE('',*,*,#1090,.T.);
+#1090 = EDGE_CURVE('',#1083,#1091,#1093,.T.);
+#1091 = VERTEX_POINT('',#1092);
+#1092 = CARTESIAN_POINT('',(-0.125,2.225,2.5E-02));
+#1093 = LINE('',#1094,#1095);
+#1094 = CARTESIAN_POINT('',(-0.125,2.35625,2.5E-02));
+#1095 = VECTOR('',#1096,1.);
+#1096 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1097 = ORIENTED_EDGE('',*,*,#1098,.T.);
+#1098 = EDGE_CURVE('',#1091,#1099,#1101,.T.);
+#1099 = VERTEX_POINT('',#1100);
+#1100 = CARTESIAN_POINT('',(-0.375,2.225,2.5E-02));
+#1101 = CIRCLE('',#1102,0.125);
+#1102 = AXIS2_PLACEMENT_3D('',#1103,#1104,#1105);
+#1103 = CARTESIAN_POINT('',(-0.25,2.225,2.5E-02));
+#1104 = DIRECTION('',(0.,0.,-1.));
+#1105 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1106 = ORIENTED_EDGE('',*,*,#1107,.T.);
+#1107 = EDGE_CURVE('',#1099,#1108,#1110,.T.);
+#1108 = VERTEX_POINT('',#1109);
+#1109 = CARTESIAN_POINT('',(-0.375,2.4875,2.5E-02));
+#1110 = LINE('',#1111,#1112);
+#1111 = CARTESIAN_POINT('',(-0.375,2.49375,2.5E-02));
+#1112 = VECTOR('',#1113,1.);
+#1113 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1114 = ORIENTED_EDGE('',*,*,#1115,.F.);
+#1115 = EDGE_CURVE('',#1116,#1108,#1118,.T.);
+#1116 = VERTEX_POINT('',#1117);
+#1117 = CARTESIAN_POINT('',(-0.625,2.4875,2.5E-02));
+#1118 = LINE('',#1119,#1120);
+#1119 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1120 = VECTOR('',#1121,1.);
+#1121 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1122 = ORIENTED_EDGE('',*,*,#1123,.T.);
+#1123 = EDGE_CURVE('',#1116,#1124,#1126,.T.);
+#1124 = VERTEX_POINT('',#1125);
+#1125 = CARTESIAN_POINT('',(-0.625,2.225,2.5E-02));
+#1126 = LINE('',#1127,#1128);
+#1127 = CARTESIAN_POINT('',(-0.625,2.35625,2.5E-02));
+#1128 = VECTOR('',#1129,1.);
+#1129 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1130 = ORIENTED_EDGE('',*,*,#1131,.T.);
+#1131 = EDGE_CURVE('',#1124,#1132,#1134,.T.);
+#1132 = VERTEX_POINT('',#1133);
+#1133 = CARTESIAN_POINT('',(-0.875,2.225,2.5E-02));
+#1134 = CIRCLE('',#1135,0.125);
+#1135 = AXIS2_PLACEMENT_3D('',#1136,#1137,#1138);
+#1136 = CARTESIAN_POINT('',(-0.75,2.225,2.5E-02));
+#1137 = DIRECTION('',(0.,0.,-1.));
+#1138 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1139 = ORIENTED_EDGE('',*,*,#1140,.T.);
+#1140 = EDGE_CURVE('',#1132,#1141,#1143,.T.);
+#1141 = VERTEX_POINT('',#1142);
+#1142 = CARTESIAN_POINT('',(-0.875,2.4875,2.5E-02));
+#1143 = LINE('',#1144,#1145);
+#1144 = CARTESIAN_POINT('',(-0.875,2.49375,2.5E-02));
+#1145 = VECTOR('',#1146,1.);
+#1146 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1147 = ORIENTED_EDGE('',*,*,#1148,.F.);
+#1148 = EDGE_CURVE('',#1149,#1141,#1151,.T.);
+#1149 = VERTEX_POINT('',#1150);
+#1150 = CARTESIAN_POINT('',(-1.125,2.4875,2.5E-02));
+#1151 = LINE('',#1152,#1153);
+#1152 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1153 = VECTOR('',#1154,1.);
+#1154 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1155 = ORIENTED_EDGE('',*,*,#1156,.T.);
+#1156 = EDGE_CURVE('',#1149,#1157,#1159,.T.);
+#1157 = VERTEX_POINT('',#1158);
+#1158 = CARTESIAN_POINT('',(-1.125,2.225,2.5E-02));
+#1159 = LINE('',#1160,#1161);
+#1160 = CARTESIAN_POINT('',(-1.125,2.35625,2.5E-02));
+#1161 = VECTOR('',#1162,1.);
+#1162 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1163 = ORIENTED_EDGE('',*,*,#1164,.T.);
+#1164 = EDGE_CURVE('',#1157,#1165,#1167,.T.);
+#1165 = VERTEX_POINT('',#1166);
+#1166 = CARTESIAN_POINT('',(-1.375,2.225,2.5E-02));
+#1167 = CIRCLE('',#1168,0.125);
+#1168 = AXIS2_PLACEMENT_3D('',#1169,#1170,#1171);
+#1169 = CARTESIAN_POINT('',(-1.25,2.225,2.5E-02));
+#1170 = DIRECTION('',(0.,0.,-1.));
+#1171 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1172 = ORIENTED_EDGE('',*,*,#1173,.T.);
+#1173 = EDGE_CURVE('',#1165,#1174,#1176,.T.);
+#1174 = VERTEX_POINT('',#1175);
+#1175 = CARTESIAN_POINT('',(-1.375,2.4875,2.5E-02));
+#1176 = LINE('',#1177,#1178);
+#1177 = CARTESIAN_POINT('',(-1.375,2.49375,2.5E-02));
+#1178 = VECTOR('',#1179,1.);
+#1179 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1180 = ORIENTED_EDGE('',*,*,#1181,.F.);
+#1181 = EDGE_CURVE('',#1182,#1174,#1184,.T.);
+#1182 = VERTEX_POINT('',#1183);
+#1183 = CARTESIAN_POINT('',(-1.625,2.4875,2.5E-02));
+#1184 = LINE('',#1185,#1186);
+#1185 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1186 = VECTOR('',#1187,1.);
+#1187 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1188 = ORIENTED_EDGE('',*,*,#1189,.T.);
+#1189 = EDGE_CURVE('',#1182,#1190,#1192,.T.);
+#1190 = VERTEX_POINT('',#1191);
+#1191 = CARTESIAN_POINT('',(-1.625,2.225,2.5E-02));
+#1192 = LINE('',#1193,#1194);
+#1193 = CARTESIAN_POINT('',(-1.625,2.35625,2.5E-02));
+#1194 = VECTOR('',#1195,1.);
+#1195 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1196 = ORIENTED_EDGE('',*,*,#1197,.T.);
+#1197 = EDGE_CURVE('',#1190,#1198,#1200,.T.);
+#1198 = VERTEX_POINT('',#1199);
+#1199 = CARTESIAN_POINT('',(-1.875,2.225,2.5E-02));
+#1200 = CIRCLE('',#1201,0.125);
+#1201 = AXIS2_PLACEMENT_3D('',#1202,#1203,#1204);
+#1202 = CARTESIAN_POINT('',(-1.75,2.225,2.5E-02));
+#1203 = DIRECTION('',(0.,0.,-1.));
+#1204 = DIRECTION('',(-1.,4.555315873023E-16,-0.));
+#1205 = ORIENTED_EDGE('',*,*,#1206,.T.);
+#1206 = EDGE_CURVE('',#1198,#127,#1207,.T.);
+#1207 = LINE('',#1208,#1209);
+#1208 = CARTESIAN_POINT('',(-1.875,2.49375,2.5E-02));
+#1209 = VECTOR('',#1210,1.);
+#1210 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1211 = FACE_BOUND('',#1212,.F.);
+#1212 = EDGE_LOOP('',(#1213,#1214,#1215,#1223,#1231));
+#1213 = ORIENTED_EDGE('',*,*,#102,.T.);
+#1214 = ORIENTED_EDGE('',*,*,#39,.T.);
+#1215 = ORIENTED_EDGE('',*,*,#1216,.T.);
+#1216 = EDGE_CURVE('',#32,#1217,#1219,.T.);
+#1217 = VERTEX_POINT('',#1218);
+#1218 = CARTESIAN_POINT('',(-1.45,1.65,2.5E-02));
+#1219 = LINE('',#1220,#1221);
+#1220 = CARTESIAN_POINT('',(-1.5,1.6,2.5E-02));
+#1221 = VECTOR('',#1222,1.);
+#1222 = DIRECTION('',(0.707106781187,0.707106781187,0.));
+#1223 = ORIENTED_EDGE('',*,*,#1224,.T.);
+#1224 = EDGE_CURVE('',#1217,#1225,#1227,.T.);
+#1225 = VERTEX_POINT('',#1226);
+#1226 = CARTESIAN_POINT('',(1.65,1.65,2.5E-02));
+#1227 = LINE('',#1228,#1229);
+#1228 = CARTESIAN_POINT('',(-0.41875,1.65,2.5E-02));
+#1229 = VECTOR('',#1230,1.);
+#1230 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1231 = ORIENTED_EDGE('',*,*,#1232,.T.);
+#1232 = EDGE_CURVE('',#1225,#103,#1233,.T.);
+#1233 = LINE('',#1234,#1235);
+#1234 = CARTESIAN_POINT('',(1.65,0.41875,2.5E-02));
+#1235 = VECTOR('',#1236,1.);
+#1236 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#1237 = PLANE('',#1238);
+#1238 = AXIS2_PLACEMENT_3D('',#1239,#1240,#1241);
+#1239 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1240 = DIRECTION('',(0.,0.,1.));
+#1241 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#1242 = ADVANCED_FACE('',(#1243),#1254,.F.);
+#1243 = FACE_BOUND('',#1244,.F.);
+#1244 = EDGE_LOOP('',(#1245,#1246,#1252,#1253));
+#1245 = ORIENTED_EDGE('',*,*,#86,.F.);
+#1246 = ORIENTED_EDGE('',*,*,#1247,.T.);
+#1247 = EDGE_CURVE('',#79,#1217,#1248,.T.);
+#1248 = LINE('',#1249,#1250);
+#1249 = CARTESIAN_POINT('',(-1.45,1.65,0.));
+#1250 = VECTOR('',#1251,1.);
+#1251 = DIRECTION('',(0.,0.,1.));
+#1252 = ORIENTED_EDGE('',*,*,#1216,.F.);
+#1253 = ORIENTED_EDGE('',*,*,#31,.F.);
+#1254 = PLANE('',#1255);
+#1255 = AXIS2_PLACEMENT_3D('',#1256,#1257,#1258);
+#1256 = CARTESIAN_POINT('',(-1.45,1.65,0.));
+#1257 = DIRECTION('',(0.707106781187,-0.707106781187,0.));
+#1258 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));
+#1259 = ADVANCED_FACE('',(#1260),#1271,.F.);
+#1260 = FACE_BOUND('',#1261,.F.);
+#1261 = EDGE_LOOP('',(#1262,#1263,#1264,#1265));
+#1262 = ORIENTED_EDGE('',*,*,#70,.F.);
+#1263 = ORIENTED_EDGE('',*,*,#110,.T.);
+#1264 = ORIENTED_EDGE('',*,*,#1232,.F.);
+#1265 = ORIENTED_EDGE('',*,*,#1266,.F.);
+#1266 = EDGE_CURVE('',#71,#1225,#1267,.T.);
+#1267 = LINE('',#1268,#1269);
+#1268 = CARTESIAN_POINT('',(1.65,1.65,0.));
+#1269 = VECTOR('',#1270,1.);
+#1270 = DIRECTION('',(0.,0.,1.));
+#1271 = PLANE('',#1272);
+#1272 = AXIS2_PLACEMENT_3D('',#1273,#1274,#1275);
+#1273 = CARTESIAN_POINT('',(1.65,-1.65,0.));
+#1274 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1275 = DIRECTION('',(2.22044604925E-16,1.,0.));
+#1276 = ADVANCED_FACE('',(#1277),#1283,.F.);
+#1277 = FACE_BOUND('',#1278,.F.);
+#1278 = EDGE_LOOP('',(#1279,#1280,#1281,#1282));
+#1279 = ORIENTED_EDGE('',*,*,#78,.F.);
+#1280 = ORIENTED_EDGE('',*,*,#1266,.T.);
+#1281 = ORIENTED_EDGE('',*,*,#1224,.F.);
+#1282 = ORIENTED_EDGE('',*,*,#1247,.F.);
+#1283 = PLANE('',#1284);
+#1284 = AXIS2_PLACEMENT_3D('',#1285,#1286,#1287);
+#1285 = CARTESIAN_POINT('',(1.65,1.65,0.));
+#1286 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#1287 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1288 = ADVANCED_FACE('',(#1289),#1498,.F.);
+#1289 = FACE_BOUND('',#1290,.F.);
+#1290 = EDGE_LOOP('',(#1291,#1301,#1307,#1308,#1316,#1324,#1330,#1331,
+#1339,#1347,#1353,#1354,#1362,#1370,#1376,#1377,#1385,#1393,#1399,
+#1400,#1408,#1416,#1422,#1423,#1431,#1439,#1445,#1446,#1454,#1462,
+#1468,#1469,#1477,#1485,#1491,#1492));
+#1291 = ORIENTED_EDGE('',*,*,#1292,.F.);
+#1292 = EDGE_CURVE('',#1293,#1295,#1297,.T.);
+#1293 = VERTEX_POINT('',#1294);
+#1294 = CARTESIAN_POINT('',(-2.4875,2.4875,0.875));
+#1295 = VERTEX_POINT('',#1296);
+#1296 = CARTESIAN_POINT('',(2.4875,2.4875,0.875));
+#1297 = LINE('',#1298,#1299);
+#1298 = CARTESIAN_POINT('',(-2.4875,2.4875,0.875));
+#1299 = VECTOR('',#1300,1.);
+#1300 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#1301 = ORIENTED_EDGE('',*,*,#1302,.F.);
+#1302 = EDGE_CURVE('',#125,#1293,#1303,.T.);
+#1303 = LINE('',#1304,#1305);
+#1304 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1305 = VECTOR('',#1306,1.);
+#1306 = DIRECTION('',(0.,0.,1.));
+#1307 = ORIENTED_EDGE('',*,*,#124,.T.);
+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);
+#1309 = EDGE_CURVE('',#127,#1310,#1312,.T.);
+#1310 = VERTEX_POINT('',#1311);
+#1311 = CARTESIAN_POINT('',(-1.875,2.4875,0.2));
+#1312 = LINE('',#1313,#1314);
+#1313 = CARTESIAN_POINT('',(-1.875,2.4875,1.25E-02));
+#1314 = VECTOR('',#1315,1.);
+#1315 = DIRECTION('',(0.,0.,1.));
+#1316 = ORIENTED_EDGE('',*,*,#1317,.F.);
+#1317 = EDGE_CURVE('',#1318,#1310,#1320,.T.);
+#1318 = VERTEX_POINT('',#1319);
+#1319 = CARTESIAN_POINT('',(-1.625,2.4875,0.2));
+#1320 = LINE('',#1321,#1322);
+#1321 = CARTESIAN_POINT('',(-2.11875,2.4875,0.2));
+#1322 = VECTOR('',#1323,1.);
+#1323 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1324 = ORIENTED_EDGE('',*,*,#1325,.T.);
+#1325 = EDGE_CURVE('',#1318,#1182,#1326,.T.);
+#1326 = LINE('',#1327,#1328);
+#1327 = CARTESIAN_POINT('',(-1.625,2.4875,1.25E-02));
+#1328 = VECTOR('',#1329,1.);
+#1329 = DIRECTION('',(-0.,0.,-1.));
+#1330 = ORIENTED_EDGE('',*,*,#1181,.T.);
+#1331 = ORIENTED_EDGE('',*,*,#1332,.T.);
+#1332 = EDGE_CURVE('',#1174,#1333,#1335,.T.);
+#1333 = VERTEX_POINT('',#1334);
+#1334 = CARTESIAN_POINT('',(-1.375,2.4875,0.2));
+#1335 = LINE('',#1336,#1337);
+#1336 = CARTESIAN_POINT('',(-1.375,2.4875,1.25E-02));
+#1337 = VECTOR('',#1338,1.);
+#1338 = DIRECTION('',(0.,0.,1.));
+#1339 = ORIENTED_EDGE('',*,*,#1340,.F.);
+#1340 = EDGE_CURVE('',#1341,#1333,#1343,.T.);
+#1341 = VERTEX_POINT('',#1342);
+#1342 = CARTESIAN_POINT('',(-1.125,2.4875,0.2));
+#1343 = LINE('',#1344,#1345);
+#1344 = CARTESIAN_POINT('',(-1.86875,2.4875,0.2));
+#1345 = VECTOR('',#1346,1.);
+#1346 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1347 = ORIENTED_EDGE('',*,*,#1348,.T.);
+#1348 = EDGE_CURVE('',#1341,#1149,#1349,.T.);
+#1349 = LINE('',#1350,#1351);
+#1350 = CARTESIAN_POINT('',(-1.125,2.4875,1.25E-02));
+#1351 = VECTOR('',#1352,1.);
+#1352 = DIRECTION('',(-0.,0.,-1.));
+#1353 = ORIENTED_EDGE('',*,*,#1148,.T.);
+#1354 = ORIENTED_EDGE('',*,*,#1355,.T.);
+#1355 = EDGE_CURVE('',#1141,#1356,#1358,.T.);
+#1356 = VERTEX_POINT('',#1357);
+#1357 = CARTESIAN_POINT('',(-0.875,2.4875,0.2));
+#1358 = LINE('',#1359,#1360);
+#1359 = CARTESIAN_POINT('',(-0.875,2.4875,1.25E-02));
+#1360 = VECTOR('',#1361,1.);
+#1361 = DIRECTION('',(0.,0.,1.));
+#1362 = ORIENTED_EDGE('',*,*,#1363,.F.);
+#1363 = EDGE_CURVE('',#1364,#1356,#1366,.T.);
+#1364 = VERTEX_POINT('',#1365);
+#1365 = CARTESIAN_POINT('',(-0.625,2.4875,0.2));
+#1366 = LINE('',#1367,#1368);
+#1367 = CARTESIAN_POINT('',(-1.61875,2.4875,0.2));
+#1368 = VECTOR('',#1369,1.);
+#1369 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1370 = ORIENTED_EDGE('',*,*,#1371,.T.);
+#1371 = EDGE_CURVE('',#1364,#1116,#1372,.T.);
+#1372 = LINE('',#1373,#1374);
+#1373 = CARTESIAN_POINT('',(-0.625,2.4875,1.25E-02));
+#1374 = VECTOR('',#1375,1.);
+#1375 = DIRECTION('',(-0.,0.,-1.));
+#1376 = ORIENTED_EDGE('',*,*,#1115,.T.);
+#1377 = ORIENTED_EDGE('',*,*,#1378,.T.);
+#1378 = EDGE_CURVE('',#1108,#1379,#1381,.T.);
+#1379 = VERTEX_POINT('',#1380);
+#1380 = CARTESIAN_POINT('',(-0.375,2.4875,0.2));
+#1381 = LINE('',#1382,#1383);
+#1382 = CARTESIAN_POINT('',(-0.375,2.4875,1.25E-02));
+#1383 = VECTOR('',#1384,1.);
+#1384 = DIRECTION('',(0.,0.,1.));
+#1385 = ORIENTED_EDGE('',*,*,#1386,.F.);
+#1386 = EDGE_CURVE('',#1387,#1379,#1389,.T.);
+#1387 = VERTEX_POINT('',#1388);
+#1388 = CARTESIAN_POINT('',(-0.125,2.4875,0.2));
+#1389 = LINE('',#1390,#1391);
+#1390 = CARTESIAN_POINT('',(-1.36875,2.4875,0.2));
+#1391 = VECTOR('',#1392,1.);
+#1392 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1393 = ORIENTED_EDGE('',*,*,#1394,.T.);
+#1394 = EDGE_CURVE('',#1387,#1083,#1395,.T.);
+#1395 = LINE('',#1396,#1397);
+#1396 = CARTESIAN_POINT('',(-0.125,2.4875,1.25E-02));
+#1397 = VECTOR('',#1398,1.);
+#1398 = DIRECTION('',(-0.,0.,-1.));
+#1399 = ORIENTED_EDGE('',*,*,#1082,.T.);
+#1400 = ORIENTED_EDGE('',*,*,#1401,.T.);
+#1401 = EDGE_CURVE('',#1075,#1402,#1404,.T.);
+#1402 = VERTEX_POINT('',#1403);
+#1403 = CARTESIAN_POINT('',(0.125,2.4875,0.2));
+#1404 = LINE('',#1405,#1406);
+#1405 = CARTESIAN_POINT('',(0.125,2.4875,1.25E-02));
+#1406 = VECTOR('',#1407,1.);
+#1407 = DIRECTION('',(0.,0.,1.));
+#1408 = ORIENTED_EDGE('',*,*,#1409,.F.);
+#1409 = EDGE_CURVE('',#1410,#1402,#1412,.T.);
+#1410 = VERTEX_POINT('',#1411);
+#1411 = CARTESIAN_POINT('',(0.375,2.4875,0.2));
+#1412 = LINE('',#1413,#1414);
+#1413 = CARTESIAN_POINT('',(-1.11875,2.4875,0.2));
+#1414 = VECTOR('',#1415,1.);
+#1415 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1416 = ORIENTED_EDGE('',*,*,#1417,.T.);
+#1417 = EDGE_CURVE('',#1410,#1050,#1418,.T.);
+#1418 = LINE('',#1419,#1420);
+#1419 = CARTESIAN_POINT('',(0.375,2.4875,1.25E-02));
+#1420 = VECTOR('',#1421,1.);
+#1421 = DIRECTION('',(-0.,0.,-1.));
+#1422 = ORIENTED_EDGE('',*,*,#1049,.T.);
+#1423 = ORIENTED_EDGE('',*,*,#1424,.T.);
+#1424 = EDGE_CURVE('',#1042,#1425,#1427,.T.);
+#1425 = VERTEX_POINT('',#1426);
+#1426 = CARTESIAN_POINT('',(0.625,2.4875,0.2));
+#1427 = LINE('',#1428,#1429);
+#1428 = CARTESIAN_POINT('',(0.625,2.4875,1.25E-02));
+#1429 = VECTOR('',#1430,1.);
+#1430 = DIRECTION('',(0.,0.,1.));
+#1431 = ORIENTED_EDGE('',*,*,#1432,.F.);
+#1432 = EDGE_CURVE('',#1433,#1425,#1435,.T.);
+#1433 = VERTEX_POINT('',#1434);
+#1434 = CARTESIAN_POINT('',(0.875,2.4875,0.2));
+#1435 = LINE('',#1436,#1437);
+#1436 = CARTESIAN_POINT('',(-0.86875,2.4875,0.2));
+#1437 = VECTOR('',#1438,1.);
+#1438 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1439 = ORIENTED_EDGE('',*,*,#1440,.T.);
+#1440 = EDGE_CURVE('',#1433,#1017,#1441,.T.);
+#1441 = LINE('',#1442,#1443);
+#1442 = CARTESIAN_POINT('',(0.875,2.4875,1.25E-02));
+#1443 = VECTOR('',#1444,1.);
+#1444 = DIRECTION('',(-0.,0.,-1.));
+#1445 = ORIENTED_EDGE('',*,*,#1016,.T.);
+#1446 = ORIENTED_EDGE('',*,*,#1447,.T.);
+#1447 = EDGE_CURVE('',#1009,#1448,#1450,.T.);
+#1448 = VERTEX_POINT('',#1449);
+#1449 = CARTESIAN_POINT('',(1.125,2.4875,0.2));
+#1450 = LINE('',#1451,#1452);
+#1451 = CARTESIAN_POINT('',(1.125,2.4875,1.25E-02));
+#1452 = VECTOR('',#1453,1.);
+#1453 = DIRECTION('',(0.,0.,1.));
+#1454 = ORIENTED_EDGE('',*,*,#1455,.F.);
+#1455 = EDGE_CURVE('',#1456,#1448,#1458,.T.);
+#1456 = VERTEX_POINT('',#1457);
+#1457 = CARTESIAN_POINT('',(1.375,2.4875,0.2));
+#1458 = LINE('',#1459,#1460);
+#1459 = CARTESIAN_POINT('',(-0.61875,2.4875,0.2));
+#1460 = VECTOR('',#1461,1.);
+#1461 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1462 = ORIENTED_EDGE('',*,*,#1463,.T.);
+#1463 = EDGE_CURVE('',#1456,#984,#1464,.T.);
+#1464 = LINE('',#1465,#1466);
+#1465 = CARTESIAN_POINT('',(1.375,2.4875,1.25E-02));
+#1466 = VECTOR('',#1467,1.);
+#1467 = DIRECTION('',(-0.,0.,-1.));
+#1468 = ORIENTED_EDGE('',*,*,#983,.T.);
+#1469 = ORIENTED_EDGE('',*,*,#1470,.T.);
+#1470 = EDGE_CURVE('',#976,#1471,#1473,.T.);
+#1471 = VERTEX_POINT('',#1472);
+#1472 = CARTESIAN_POINT('',(1.625,2.4875,0.2));
+#1473 = LINE('',#1474,#1475);
+#1474 = CARTESIAN_POINT('',(1.625,2.4875,1.25E-02));
+#1475 = VECTOR('',#1476,1.);
+#1476 = DIRECTION('',(0.,0.,1.));
+#1477 = ORIENTED_EDGE('',*,*,#1478,.F.);
+#1478 = EDGE_CURVE('',#1479,#1471,#1481,.T.);
+#1479 = VERTEX_POINT('',#1480);
+#1480 = CARTESIAN_POINT('',(1.875,2.4875,0.2));
+#1481 = LINE('',#1482,#1483);
+#1482 = CARTESIAN_POINT('',(-0.36875,2.4875,0.2));
+#1483 = VECTOR('',#1484,1.);
+#1484 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#1485 = ORIENTED_EDGE('',*,*,#1486,.T.);
+#1486 = EDGE_CURVE('',#1479,#951,#1487,.T.);
+#1487 = LINE('',#1488,#1489);
+#1488 = CARTESIAN_POINT('',(1.875,2.4875,1.25E-02));
+#1489 = VECTOR('',#1490,1.);
+#1490 = DIRECTION('',(-0.,0.,-1.));
+#1491 = ORIENTED_EDGE('',*,*,#950,.T.);
+#1492 = ORIENTED_EDGE('',*,*,#1493,.T.);
+#1493 = EDGE_CURVE('',#943,#1295,#1494,.T.);
+#1494 = LINE('',#1495,#1496);
+#1495 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#1496 = VECTOR('',#1497,1.);
+#1497 = DIRECTION('',(0.,0.,1.));
+#1498 = PLANE('',#1499);
+#1499 = AXIS2_PLACEMENT_3D('',#1500,#1501,#1502);
+#1500 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#1501 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#1502 = DIRECTION('',(0.,0.,1.));
+#1503 = ADVANCED_FACE('',(#1504),#1538,.F.);
+#1504 = FACE_BOUND('',#1505,.F.);
+#1505 = EDGE_LOOP('',(#1506,#1516,#1524,#1530,#1531,#1532));
+#1506 = ORIENTED_EDGE('',*,*,#1507,.F.);
+#1507 = EDGE_CURVE('',#1508,#1510,#1512,.T.);
+#1508 = VERTEX_POINT('',#1509);
+#1509 = CARTESIAN_POINT('',(-1.875,2.5,0.));
+#1510 = VERTEX_POINT('',#1511);
+#1511 = CARTESIAN_POINT('',(-1.875,2.225,0.));
+#1512 = LINE('',#1513,#1514);
+#1513 = CARTESIAN_POINT('',(-1.875,2.5,0.));
+#1514 = VECTOR('',#1515,1.);
+#1515 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1516 = ORIENTED_EDGE('',*,*,#1517,.T.);
+#1517 = EDGE_CURVE('',#1508,#1518,#1520,.T.);
+#1518 = VERTEX_POINT('',#1519);
+#1519 = CARTESIAN_POINT('',(-1.875,2.5,0.2));
+#1520 = LINE('',#1521,#1522);
+#1521 = CARTESIAN_POINT('',(-1.875,2.5,0.));
+#1522 = VECTOR('',#1523,1.);
+#1523 = DIRECTION('',(0.,0.,1.));
+#1524 = ORIENTED_EDGE('',*,*,#1525,.T.);
+#1525 = EDGE_CURVE('',#1518,#1310,#1526,.T.);
+#1526 = LINE('',#1527,#1528);
+#1527 = CARTESIAN_POINT('',(-1.875,2.5,0.2));
+#1528 = VECTOR('',#1529,1.);
+#1529 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1530 = ORIENTED_EDGE('',*,*,#1309,.F.);
+#1531 = ORIENTED_EDGE('',*,*,#1206,.F.);
+#1532 = ORIENTED_EDGE('',*,*,#1533,.F.);
+#1533 = EDGE_CURVE('',#1510,#1198,#1534,.T.);
+#1534 = LINE('',#1535,#1536);
+#1535 = CARTESIAN_POINT('',(-1.875,2.225,0.));
+#1536 = VECTOR('',#1537,1.);
+#1537 = DIRECTION('',(0.,0.,1.));
+#1538 = PLANE('',#1539);
+#1539 = AXIS2_PLACEMENT_3D('',#1540,#1541,#1542);
+#1540 = CARTESIAN_POINT('',(-1.875,2.5,0.));
+#1541 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#1542 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1543 = ADVANCED_FACE('',(#1544),#1563,.T.);
+#1544 = FACE_BOUND('',#1545,.F.);
+#1545 = EDGE_LOOP('',(#1546,#1555,#1556,#1557));
+#1546 = ORIENTED_EDGE('',*,*,#1547,.F.);
+#1547 = EDGE_CURVE('',#1510,#1548,#1550,.T.);
+#1548 = VERTEX_POINT('',#1549);
+#1549 = CARTESIAN_POINT('',(-1.625,2.225,0.));
+#1550 = CIRCLE('',#1551,0.125);
+#1551 = AXIS2_PLACEMENT_3D('',#1552,#1553,#1554);
+#1552 = CARTESIAN_POINT('',(-1.75,2.225,0.));
+#1553 = DIRECTION('',(0.,0.,1.));
+#1554 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1555 = ORIENTED_EDGE('',*,*,#1533,.T.);
+#1556 = ORIENTED_EDGE('',*,*,#1197,.F.);
+#1557 = ORIENTED_EDGE('',*,*,#1558,.F.);
+#1558 = EDGE_CURVE('',#1548,#1190,#1559,.T.);
+#1559 = LINE('',#1560,#1561);
+#1560 = CARTESIAN_POINT('',(-1.625,2.225,0.));
+#1561 = VECTOR('',#1562,1.);
+#1562 = DIRECTION('',(0.,0.,1.));
+#1563 = CYLINDRICAL_SURFACE('',#1564,0.125);
+#1564 = AXIS2_PLACEMENT_3D('',#1565,#1566,#1567);
+#1565 = CARTESIAN_POINT('',(-1.75,2.225,0.));
+#1566 = DIRECTION('',(0.,0.,-1.));
+#1567 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1568 = ADVANCED_FACE('',(#1569),#1596,.F.);
+#1569 = FACE_BOUND('',#1570,.F.);
+#1570 = EDGE_LOOP('',(#1571,#1579,#1580,#1581,#1582,#1590));
+#1571 = ORIENTED_EDGE('',*,*,#1572,.F.);
+#1572 = EDGE_CURVE('',#1548,#1573,#1575,.T.);
+#1573 = VERTEX_POINT('',#1574);
+#1574 = CARTESIAN_POINT('',(-1.625,2.5,0.));
+#1575 = LINE('',#1576,#1577);
+#1576 = CARTESIAN_POINT('',(-1.625,2.225,0.));
+#1577 = VECTOR('',#1578,1.);
+#1578 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1579 = ORIENTED_EDGE('',*,*,#1558,.T.);
+#1580 = ORIENTED_EDGE('',*,*,#1189,.F.);
+#1581 = ORIENTED_EDGE('',*,*,#1325,.F.);
+#1582 = ORIENTED_EDGE('',*,*,#1583,.T.);
+#1583 = EDGE_CURVE('',#1318,#1584,#1586,.T.);
+#1584 = VERTEX_POINT('',#1585);
+#1585 = CARTESIAN_POINT('',(-1.625,2.5,0.2));
+#1586 = LINE('',#1587,#1588);
+#1587 = CARTESIAN_POINT('',(-1.625,2.225,0.2));
+#1588 = VECTOR('',#1589,1.);
+#1589 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1590 = ORIENTED_EDGE('',*,*,#1591,.F.);
+#1591 = EDGE_CURVE('',#1573,#1584,#1592,.T.);
+#1592 = LINE('',#1593,#1594);
+#1593 = CARTESIAN_POINT('',(-1.625,2.5,0.));
+#1594 = VECTOR('',#1595,1.);
+#1595 = DIRECTION('',(0.,0.,1.));
+#1596 = PLANE('',#1597);
+#1597 = AXIS2_PLACEMENT_3D('',#1598,#1599,#1600);
+#1598 = CARTESIAN_POINT('',(-1.625,2.225,0.));
+#1599 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1600 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1601 = ADVANCED_FACE('',(#1602),#1636,.F.);
+#1602 = FACE_BOUND('',#1603,.F.);
+#1603 = EDGE_LOOP('',(#1604,#1614,#1622,#1628,#1629,#1630));
+#1604 = ORIENTED_EDGE('',*,*,#1605,.F.);
+#1605 = EDGE_CURVE('',#1606,#1608,#1610,.T.);
+#1606 = VERTEX_POINT('',#1607);
+#1607 = CARTESIAN_POINT('',(-1.375,2.5,0.));
+#1608 = VERTEX_POINT('',#1609);
+#1609 = CARTESIAN_POINT('',(-1.375,2.225,0.));
+#1610 = LINE('',#1611,#1612);
+#1611 = CARTESIAN_POINT('',(-1.375,2.5,0.));
+#1612 = VECTOR('',#1613,1.);
+#1613 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1614 = ORIENTED_EDGE('',*,*,#1615,.T.);
+#1615 = EDGE_CURVE('',#1606,#1616,#1618,.T.);
+#1616 = VERTEX_POINT('',#1617);
+#1617 = CARTESIAN_POINT('',(-1.375,2.5,0.2));
+#1618 = LINE('',#1619,#1620);
+#1619 = CARTESIAN_POINT('',(-1.375,2.5,0.));
+#1620 = VECTOR('',#1621,1.);
+#1621 = DIRECTION('',(0.,0.,1.));
+#1622 = ORIENTED_EDGE('',*,*,#1623,.T.);
+#1623 = EDGE_CURVE('',#1616,#1333,#1624,.T.);
+#1624 = LINE('',#1625,#1626);
+#1625 = CARTESIAN_POINT('',(-1.375,2.5,0.2));
+#1626 = VECTOR('',#1627,1.);
+#1627 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1628 = ORIENTED_EDGE('',*,*,#1332,.F.);
+#1629 = ORIENTED_EDGE('',*,*,#1173,.F.);
+#1630 = ORIENTED_EDGE('',*,*,#1631,.F.);
+#1631 = EDGE_CURVE('',#1608,#1165,#1632,.T.);
+#1632 = LINE('',#1633,#1634);
+#1633 = CARTESIAN_POINT('',(-1.375,2.225,0.));
+#1634 = VECTOR('',#1635,1.);
+#1635 = DIRECTION('',(0.,0.,1.));
+#1636 = PLANE('',#1637);
+#1637 = AXIS2_PLACEMENT_3D('',#1638,#1639,#1640);
+#1638 = CARTESIAN_POINT('',(-1.375,2.5,0.));
+#1639 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#1640 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1641 = ADVANCED_FACE('',(#1642),#1661,.T.);
+#1642 = FACE_BOUND('',#1643,.F.);
+#1643 = EDGE_LOOP('',(#1644,#1653,#1654,#1655));
+#1644 = ORIENTED_EDGE('',*,*,#1645,.F.);
+#1645 = EDGE_CURVE('',#1608,#1646,#1648,.T.);
+#1646 = VERTEX_POINT('',#1647);
+#1647 = CARTESIAN_POINT('',(-1.125,2.225,0.));
+#1648 = CIRCLE('',#1649,0.125);
+#1649 = AXIS2_PLACEMENT_3D('',#1650,#1651,#1652);
+#1650 = CARTESIAN_POINT('',(-1.25,2.225,0.));
+#1651 = DIRECTION('',(0.,0.,1.));
+#1652 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1653 = ORIENTED_EDGE('',*,*,#1631,.T.);
+#1654 = ORIENTED_EDGE('',*,*,#1164,.F.);
+#1655 = ORIENTED_EDGE('',*,*,#1656,.F.);
+#1656 = EDGE_CURVE('',#1646,#1157,#1657,.T.);
+#1657 = LINE('',#1658,#1659);
+#1658 = CARTESIAN_POINT('',(-1.125,2.225,0.));
+#1659 = VECTOR('',#1660,1.);
+#1660 = DIRECTION('',(0.,0.,1.));
+#1661 = CYLINDRICAL_SURFACE('',#1662,0.125);
+#1662 = AXIS2_PLACEMENT_3D('',#1663,#1664,#1665);
+#1663 = CARTESIAN_POINT('',(-1.25,2.225,0.));
+#1664 = DIRECTION('',(0.,0.,-1.));
+#1665 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1666 = ADVANCED_FACE('',(#1667),#1694,.F.);
+#1667 = FACE_BOUND('',#1668,.F.);
+#1668 = EDGE_LOOP('',(#1669,#1677,#1678,#1679,#1680,#1688));
+#1669 = ORIENTED_EDGE('',*,*,#1670,.F.);
+#1670 = EDGE_CURVE('',#1646,#1671,#1673,.T.);
+#1671 = VERTEX_POINT('',#1672);
+#1672 = CARTESIAN_POINT('',(-1.125,2.5,0.));
+#1673 = LINE('',#1674,#1675);
+#1674 = CARTESIAN_POINT('',(-1.125,2.225,0.));
+#1675 = VECTOR('',#1676,1.);
+#1676 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1677 = ORIENTED_EDGE('',*,*,#1656,.T.);
+#1678 = ORIENTED_EDGE('',*,*,#1156,.F.);
+#1679 = ORIENTED_EDGE('',*,*,#1348,.F.);
+#1680 = ORIENTED_EDGE('',*,*,#1681,.T.);
+#1681 = EDGE_CURVE('',#1341,#1682,#1684,.T.);
+#1682 = VERTEX_POINT('',#1683);
+#1683 = CARTESIAN_POINT('',(-1.125,2.5,0.2));
+#1684 = LINE('',#1685,#1686);
+#1685 = CARTESIAN_POINT('',(-1.125,2.225,0.2));
+#1686 = VECTOR('',#1687,1.);
+#1687 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1688 = ORIENTED_EDGE('',*,*,#1689,.F.);
+#1689 = EDGE_CURVE('',#1671,#1682,#1690,.T.);
+#1690 = LINE('',#1691,#1692);
+#1691 = CARTESIAN_POINT('',(-1.125,2.5,0.));
+#1692 = VECTOR('',#1693,1.);
+#1693 = DIRECTION('',(0.,0.,1.));
+#1694 = PLANE('',#1695);
+#1695 = AXIS2_PLACEMENT_3D('',#1696,#1697,#1698);
+#1696 = CARTESIAN_POINT('',(-1.125,2.225,0.));
+#1697 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1698 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1699 = ADVANCED_FACE('',(#1700),#1734,.F.);
+#1700 = FACE_BOUND('',#1701,.F.);
+#1701 = EDGE_LOOP('',(#1702,#1712,#1720,#1726,#1727,#1728));
+#1702 = ORIENTED_EDGE('',*,*,#1703,.F.);
+#1703 = EDGE_CURVE('',#1704,#1706,#1708,.T.);
+#1704 = VERTEX_POINT('',#1705);
+#1705 = CARTESIAN_POINT('',(-0.875,2.5,0.));
+#1706 = VERTEX_POINT('',#1707);
+#1707 = CARTESIAN_POINT('',(-0.875,2.225,0.));
+#1708 = LINE('',#1709,#1710);
+#1709 = CARTESIAN_POINT('',(-0.875,2.5,0.));
+#1710 = VECTOR('',#1711,1.);
+#1711 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1712 = ORIENTED_EDGE('',*,*,#1713,.T.);
+#1713 = EDGE_CURVE('',#1704,#1714,#1716,.T.);
+#1714 = VERTEX_POINT('',#1715);
+#1715 = CARTESIAN_POINT('',(-0.875,2.5,0.2));
+#1716 = LINE('',#1717,#1718);
+#1717 = CARTESIAN_POINT('',(-0.875,2.5,0.));
+#1718 = VECTOR('',#1719,1.);
+#1719 = DIRECTION('',(0.,0.,1.));
+#1720 = ORIENTED_EDGE('',*,*,#1721,.T.);
+#1721 = EDGE_CURVE('',#1714,#1356,#1722,.T.);
+#1722 = LINE('',#1723,#1724);
+#1723 = CARTESIAN_POINT('',(-0.875,2.5,0.2));
+#1724 = VECTOR('',#1725,1.);
+#1725 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1726 = ORIENTED_EDGE('',*,*,#1355,.F.);
+#1727 = ORIENTED_EDGE('',*,*,#1140,.F.);
+#1728 = ORIENTED_EDGE('',*,*,#1729,.F.);
+#1729 = EDGE_CURVE('',#1706,#1132,#1730,.T.);
+#1730 = LINE('',#1731,#1732);
+#1731 = CARTESIAN_POINT('',(-0.875,2.225,0.));
+#1732 = VECTOR('',#1733,1.);
+#1733 = DIRECTION('',(0.,0.,1.));
+#1734 = PLANE('',#1735);
+#1735 = AXIS2_PLACEMENT_3D('',#1736,#1737,#1738);
+#1736 = CARTESIAN_POINT('',(-0.875,2.5,0.));
+#1737 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#1738 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1739 = ADVANCED_FACE('',(#1740),#1759,.T.);
+#1740 = FACE_BOUND('',#1741,.F.);
+#1741 = EDGE_LOOP('',(#1742,#1751,#1752,#1753));
+#1742 = ORIENTED_EDGE('',*,*,#1743,.F.);
+#1743 = EDGE_CURVE('',#1706,#1744,#1746,.T.);
+#1744 = VERTEX_POINT('',#1745);
+#1745 = CARTESIAN_POINT('',(-0.625,2.225,0.));
+#1746 = CIRCLE('',#1747,0.125);
+#1747 = AXIS2_PLACEMENT_3D('',#1748,#1749,#1750);
+#1748 = CARTESIAN_POINT('',(-0.75,2.225,0.));
+#1749 = DIRECTION('',(0.,0.,1.));
+#1750 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1751 = ORIENTED_EDGE('',*,*,#1729,.T.);
+#1752 = ORIENTED_EDGE('',*,*,#1131,.F.);
+#1753 = ORIENTED_EDGE('',*,*,#1754,.F.);
+#1754 = EDGE_CURVE('',#1744,#1124,#1755,.T.);
+#1755 = LINE('',#1756,#1757);
+#1756 = CARTESIAN_POINT('',(-0.625,2.225,0.));
+#1757 = VECTOR('',#1758,1.);
+#1758 = DIRECTION('',(0.,0.,1.));
+#1759 = CYLINDRICAL_SURFACE('',#1760,0.125);
+#1760 = AXIS2_PLACEMENT_3D('',#1761,#1762,#1763);
+#1761 = CARTESIAN_POINT('',(-0.75,2.225,0.));
+#1762 = DIRECTION('',(0.,0.,-1.));
+#1763 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1764 = ADVANCED_FACE('',(#1765),#1792,.F.);
+#1765 = FACE_BOUND('',#1766,.F.);
+#1766 = EDGE_LOOP('',(#1767,#1775,#1776,#1777,#1778,#1786));
+#1767 = ORIENTED_EDGE('',*,*,#1768,.F.);
+#1768 = EDGE_CURVE('',#1744,#1769,#1771,.T.);
+#1769 = VERTEX_POINT('',#1770);
+#1770 = CARTESIAN_POINT('',(-0.625,2.5,0.));
+#1771 = LINE('',#1772,#1773);
+#1772 = CARTESIAN_POINT('',(-0.625,2.225,0.));
+#1773 = VECTOR('',#1774,1.);
+#1774 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1775 = ORIENTED_EDGE('',*,*,#1754,.T.);
+#1776 = ORIENTED_EDGE('',*,*,#1123,.F.);
+#1777 = ORIENTED_EDGE('',*,*,#1371,.F.);
+#1778 = ORIENTED_EDGE('',*,*,#1779,.T.);
+#1779 = EDGE_CURVE('',#1364,#1780,#1782,.T.);
+#1780 = VERTEX_POINT('',#1781);
+#1781 = CARTESIAN_POINT('',(-0.625,2.5,0.2));
+#1782 = LINE('',#1783,#1784);
+#1783 = CARTESIAN_POINT('',(-0.625,2.225,0.2));
+#1784 = VECTOR('',#1785,1.);
+#1785 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1786 = ORIENTED_EDGE('',*,*,#1787,.F.);
+#1787 = EDGE_CURVE('',#1769,#1780,#1788,.T.);
+#1788 = LINE('',#1789,#1790);
+#1789 = CARTESIAN_POINT('',(-0.625,2.5,0.));
+#1790 = VECTOR('',#1791,1.);
+#1791 = DIRECTION('',(0.,0.,1.));
+#1792 = PLANE('',#1793);
+#1793 = AXIS2_PLACEMENT_3D('',#1794,#1795,#1796);
+#1794 = CARTESIAN_POINT('',(-0.625,2.225,0.));
+#1795 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1796 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1797 = ADVANCED_FACE('',(#1798),#1832,.F.);
+#1798 = FACE_BOUND('',#1799,.F.);
+#1799 = EDGE_LOOP('',(#1800,#1810,#1818,#1824,#1825,#1826));
+#1800 = ORIENTED_EDGE('',*,*,#1801,.F.);
+#1801 = EDGE_CURVE('',#1802,#1804,#1806,.T.);
+#1802 = VERTEX_POINT('',#1803);
+#1803 = CARTESIAN_POINT('',(-0.375,2.5,0.));
+#1804 = VERTEX_POINT('',#1805);
+#1805 = CARTESIAN_POINT('',(-0.375,2.225,0.));
+#1806 = LINE('',#1807,#1808);
+#1807 = CARTESIAN_POINT('',(-0.375,2.5,0.));
+#1808 = VECTOR('',#1809,1.);
+#1809 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1810 = ORIENTED_EDGE('',*,*,#1811,.T.);
+#1811 = EDGE_CURVE('',#1802,#1812,#1814,.T.);
+#1812 = VERTEX_POINT('',#1813);
+#1813 = CARTESIAN_POINT('',(-0.375,2.5,0.2));
+#1814 = LINE('',#1815,#1816);
+#1815 = CARTESIAN_POINT('',(-0.375,2.5,0.));
+#1816 = VECTOR('',#1817,1.);
+#1817 = DIRECTION('',(0.,0.,1.));
+#1818 = ORIENTED_EDGE('',*,*,#1819,.T.);
+#1819 = EDGE_CURVE('',#1812,#1379,#1820,.T.);
+#1820 = LINE('',#1821,#1822);
+#1821 = CARTESIAN_POINT('',(-0.375,2.5,0.2));
+#1822 = VECTOR('',#1823,1.);
+#1823 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1824 = ORIENTED_EDGE('',*,*,#1378,.F.);
+#1825 = ORIENTED_EDGE('',*,*,#1107,.F.);
+#1826 = ORIENTED_EDGE('',*,*,#1827,.F.);
+#1827 = EDGE_CURVE('',#1804,#1099,#1828,.T.);
+#1828 = LINE('',#1829,#1830);
+#1829 = CARTESIAN_POINT('',(-0.375,2.225,0.));
+#1830 = VECTOR('',#1831,1.);
+#1831 = DIRECTION('',(0.,0.,1.));
+#1832 = PLANE('',#1833);
+#1833 = AXIS2_PLACEMENT_3D('',#1834,#1835,#1836);
+#1834 = CARTESIAN_POINT('',(-0.375,2.5,0.));
+#1835 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#1836 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1837 = ADVANCED_FACE('',(#1838),#1857,.T.);
+#1838 = FACE_BOUND('',#1839,.F.);
+#1839 = EDGE_LOOP('',(#1840,#1849,#1850,#1851));
+#1840 = ORIENTED_EDGE('',*,*,#1841,.F.);
+#1841 = EDGE_CURVE('',#1804,#1842,#1844,.T.);
+#1842 = VERTEX_POINT('',#1843);
+#1843 = CARTESIAN_POINT('',(-0.125,2.225,0.));
+#1844 = CIRCLE('',#1845,0.125);
+#1845 = AXIS2_PLACEMENT_3D('',#1846,#1847,#1848);
+#1846 = CARTESIAN_POINT('',(-0.25,2.225,0.));
+#1847 = DIRECTION('',(0.,0.,1.));
+#1848 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1849 = ORIENTED_EDGE('',*,*,#1827,.T.);
+#1850 = ORIENTED_EDGE('',*,*,#1098,.F.);
+#1851 = ORIENTED_EDGE('',*,*,#1852,.F.);
+#1852 = EDGE_CURVE('',#1842,#1091,#1853,.T.);
+#1853 = LINE('',#1854,#1855);
+#1854 = CARTESIAN_POINT('',(-0.125,2.225,0.));
+#1855 = VECTOR('',#1856,1.);
+#1856 = DIRECTION('',(0.,0.,1.));
+#1857 = CYLINDRICAL_SURFACE('',#1858,0.125);
+#1858 = AXIS2_PLACEMENT_3D('',#1859,#1860,#1861);
+#1859 = CARTESIAN_POINT('',(-0.25,2.225,0.));
+#1860 = DIRECTION('',(0.,0.,-1.));
+#1861 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1862 = ADVANCED_FACE('',(#1863),#1890,.F.);
+#1863 = FACE_BOUND('',#1864,.F.);
+#1864 = EDGE_LOOP('',(#1865,#1873,#1874,#1875,#1876,#1884));
+#1865 = ORIENTED_EDGE('',*,*,#1866,.F.);
+#1866 = EDGE_CURVE('',#1842,#1867,#1869,.T.);
+#1867 = VERTEX_POINT('',#1868);
+#1868 = CARTESIAN_POINT('',(-0.125,2.5,0.));
+#1869 = LINE('',#1870,#1871);
+#1870 = CARTESIAN_POINT('',(-0.125,2.225,0.));
+#1871 = VECTOR('',#1872,1.);
+#1872 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1873 = ORIENTED_EDGE('',*,*,#1852,.T.);
+#1874 = ORIENTED_EDGE('',*,*,#1090,.F.);
+#1875 = ORIENTED_EDGE('',*,*,#1394,.F.);
+#1876 = ORIENTED_EDGE('',*,*,#1877,.T.);
+#1877 = EDGE_CURVE('',#1387,#1878,#1880,.T.);
+#1878 = VERTEX_POINT('',#1879);
+#1879 = CARTESIAN_POINT('',(-0.125,2.5,0.2));
+#1880 = LINE('',#1881,#1882);
+#1881 = CARTESIAN_POINT('',(-0.125,2.225,0.2));
+#1882 = VECTOR('',#1883,1.);
+#1883 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1884 = ORIENTED_EDGE('',*,*,#1885,.F.);
+#1885 = EDGE_CURVE('',#1867,#1878,#1886,.T.);
+#1886 = LINE('',#1887,#1888);
+#1887 = CARTESIAN_POINT('',(-0.125,2.5,0.));
+#1888 = VECTOR('',#1889,1.);
+#1889 = DIRECTION('',(0.,0.,1.));
+#1890 = PLANE('',#1891);
+#1891 = AXIS2_PLACEMENT_3D('',#1892,#1893,#1894);
+#1892 = CARTESIAN_POINT('',(-0.125,2.225,0.));
+#1893 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1894 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1895 = ADVANCED_FACE('',(#1896),#1930,.F.);
+#1896 = FACE_BOUND('',#1897,.F.);
+#1897 = EDGE_LOOP('',(#1898,#1908,#1916,#1922,#1923,#1924));
+#1898 = ORIENTED_EDGE('',*,*,#1899,.F.);
+#1899 = EDGE_CURVE('',#1900,#1902,#1904,.T.);
+#1900 = VERTEX_POINT('',#1901);
+#1901 = CARTESIAN_POINT('',(0.125,2.5,0.));
+#1902 = VERTEX_POINT('',#1903);
+#1903 = CARTESIAN_POINT('',(0.125,2.225,0.));
+#1904 = LINE('',#1905,#1906);
+#1905 = CARTESIAN_POINT('',(0.125,2.5,0.));
+#1906 = VECTOR('',#1907,1.);
+#1907 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1908 = ORIENTED_EDGE('',*,*,#1909,.T.);
+#1909 = EDGE_CURVE('',#1900,#1910,#1912,.T.);
+#1910 = VERTEX_POINT('',#1911);
+#1911 = CARTESIAN_POINT('',(0.125,2.5,0.2));
+#1912 = LINE('',#1913,#1914);
+#1913 = CARTESIAN_POINT('',(0.125,2.5,0.));
+#1914 = VECTOR('',#1915,1.);
+#1915 = DIRECTION('',(0.,0.,1.));
+#1916 = ORIENTED_EDGE('',*,*,#1917,.T.);
+#1917 = EDGE_CURVE('',#1910,#1402,#1918,.T.);
+#1918 = LINE('',#1919,#1920);
+#1919 = CARTESIAN_POINT('',(0.125,2.5,0.2));
+#1920 = VECTOR('',#1921,1.);
+#1921 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1922 = ORIENTED_EDGE('',*,*,#1401,.F.);
+#1923 = ORIENTED_EDGE('',*,*,#1074,.F.);
+#1924 = ORIENTED_EDGE('',*,*,#1925,.F.);
+#1925 = EDGE_CURVE('',#1902,#1066,#1926,.T.);
+#1926 = LINE('',#1927,#1928);
+#1927 = CARTESIAN_POINT('',(0.125,2.225,0.));
+#1928 = VECTOR('',#1929,1.);
+#1929 = DIRECTION('',(0.,0.,1.));
+#1930 = PLANE('',#1931);
+#1931 = AXIS2_PLACEMENT_3D('',#1932,#1933,#1934);
+#1932 = CARTESIAN_POINT('',(0.125,2.5,0.));
+#1933 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#1934 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#1935 = ADVANCED_FACE('',(#1936),#1955,.T.);
+#1936 = FACE_BOUND('',#1937,.F.);
+#1937 = EDGE_LOOP('',(#1938,#1947,#1948,#1949));
+#1938 = ORIENTED_EDGE('',*,*,#1939,.F.);
+#1939 = EDGE_CURVE('',#1902,#1940,#1942,.T.);
+#1940 = VERTEX_POINT('',#1941);
+#1941 = CARTESIAN_POINT('',(0.375,2.225,0.));
+#1942 = CIRCLE('',#1943,0.125);
+#1943 = AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);
+#1944 = CARTESIAN_POINT('',(0.25,2.225,0.));
+#1945 = DIRECTION('',(0.,0.,1.));
+#1946 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1947 = ORIENTED_EDGE('',*,*,#1925,.T.);
+#1948 = ORIENTED_EDGE('',*,*,#1065,.F.);
+#1949 = ORIENTED_EDGE('',*,*,#1950,.F.);
+#1950 = EDGE_CURVE('',#1940,#1058,#1951,.T.);
+#1951 = LINE('',#1952,#1953);
+#1952 = CARTESIAN_POINT('',(0.375,2.225,0.));
+#1953 = VECTOR('',#1954,1.);
+#1954 = DIRECTION('',(0.,0.,1.));
+#1955 = CYLINDRICAL_SURFACE('',#1956,0.125);
+#1956 = AXIS2_PLACEMENT_3D('',#1957,#1958,#1959);
+#1957 = CARTESIAN_POINT('',(0.25,2.225,0.));
+#1958 = DIRECTION('',(0.,0.,-1.));
+#1959 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1960 = ADVANCED_FACE('',(#1961),#1988,.F.);
+#1961 = FACE_BOUND('',#1962,.F.);
+#1962 = EDGE_LOOP('',(#1963,#1971,#1972,#1973,#1974,#1982));
+#1963 = ORIENTED_EDGE('',*,*,#1964,.F.);
+#1964 = EDGE_CURVE('',#1940,#1965,#1967,.T.);
+#1965 = VERTEX_POINT('',#1966);
+#1966 = CARTESIAN_POINT('',(0.375,2.5,0.));
+#1967 = LINE('',#1968,#1969);
+#1968 = CARTESIAN_POINT('',(0.375,2.225,0.));
+#1969 = VECTOR('',#1970,1.);
+#1970 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1971 = ORIENTED_EDGE('',*,*,#1950,.T.);
+#1972 = ORIENTED_EDGE('',*,*,#1057,.F.);
+#1973 = ORIENTED_EDGE('',*,*,#1417,.F.);
+#1974 = ORIENTED_EDGE('',*,*,#1975,.T.);
+#1975 = EDGE_CURVE('',#1410,#1976,#1978,.T.);
+#1976 = VERTEX_POINT('',#1977);
+#1977 = CARTESIAN_POINT('',(0.375,2.5,0.2));
+#1978 = LINE('',#1979,#1980);
+#1979 = CARTESIAN_POINT('',(0.375,2.225,0.2));
+#1980 = VECTOR('',#1981,1.);
+#1981 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1982 = ORIENTED_EDGE('',*,*,#1983,.F.);
+#1983 = EDGE_CURVE('',#1965,#1976,#1984,.T.);
+#1984 = LINE('',#1985,#1986);
+#1985 = CARTESIAN_POINT('',(0.375,2.5,0.));
+#1986 = VECTOR('',#1987,1.);
+#1987 = DIRECTION('',(0.,0.,1.));
+#1988 = PLANE('',#1989);
+#1989 = AXIS2_PLACEMENT_3D('',#1990,#1991,#1992);
+#1990 = CARTESIAN_POINT('',(0.375,2.225,0.));
+#1991 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#1992 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#1993 = ADVANCED_FACE('',(#1994),#2028,.F.);
+#1994 = FACE_BOUND('',#1995,.F.);
+#1995 = EDGE_LOOP('',(#1996,#2006,#2014,#2020,#2021,#2022));
+#1996 = ORIENTED_EDGE('',*,*,#1997,.F.);
+#1997 = EDGE_CURVE('',#1998,#2000,#2002,.T.);
+#1998 = VERTEX_POINT('',#1999);
+#1999 = CARTESIAN_POINT('',(0.625,2.5,0.));
+#2000 = VERTEX_POINT('',#2001);
+#2001 = CARTESIAN_POINT('',(0.625,2.225,0.));
+#2002 = LINE('',#2003,#2004);
+#2003 = CARTESIAN_POINT('',(0.625,2.5,0.));
+#2004 = VECTOR('',#2005,1.);
+#2005 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2006 = ORIENTED_EDGE('',*,*,#2007,.T.);
+#2007 = EDGE_CURVE('',#1998,#2008,#2010,.T.);
+#2008 = VERTEX_POINT('',#2009);
+#2009 = CARTESIAN_POINT('',(0.625,2.5,0.2));
+#2010 = LINE('',#2011,#2012);
+#2011 = CARTESIAN_POINT('',(0.625,2.5,0.));
+#2012 = VECTOR('',#2013,1.);
+#2013 = DIRECTION('',(0.,0.,1.));
+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);
+#2015 = EDGE_CURVE('',#2008,#1425,#2016,.T.);
+#2016 = LINE('',#2017,#2018);
+#2017 = CARTESIAN_POINT('',(0.625,2.5,0.2));
+#2018 = VECTOR('',#2019,1.);
+#2019 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2020 = ORIENTED_EDGE('',*,*,#1424,.F.);
+#2021 = ORIENTED_EDGE('',*,*,#1041,.F.);
+#2022 = ORIENTED_EDGE('',*,*,#2023,.F.);
+#2023 = EDGE_CURVE('',#2000,#1033,#2024,.T.);
+#2024 = LINE('',#2025,#2026);
+#2025 = CARTESIAN_POINT('',(0.625,2.225,0.));
+#2026 = VECTOR('',#2027,1.);
+#2027 = DIRECTION('',(0.,0.,1.));
+#2028 = PLANE('',#2029);
+#2029 = AXIS2_PLACEMENT_3D('',#2030,#2031,#2032);
+#2030 = CARTESIAN_POINT('',(0.625,2.5,0.));
+#2031 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#2032 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2033 = ADVANCED_FACE('',(#2034),#2053,.T.);
+#2034 = FACE_BOUND('',#2035,.F.);
+#2035 = EDGE_LOOP('',(#2036,#2045,#2046,#2047));
+#2036 = ORIENTED_EDGE('',*,*,#2037,.F.);
+#2037 = EDGE_CURVE('',#2000,#2038,#2040,.T.);
+#2038 = VERTEX_POINT('',#2039);
+#2039 = CARTESIAN_POINT('',(0.875,2.225,0.));
+#2040 = CIRCLE('',#2041,0.125);
+#2041 = AXIS2_PLACEMENT_3D('',#2042,#2043,#2044);
+#2042 = CARTESIAN_POINT('',(0.75,2.225,0.));
+#2043 = DIRECTION('',(0.,0.,1.));
+#2044 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2045 = ORIENTED_EDGE('',*,*,#2023,.T.);
+#2046 = ORIENTED_EDGE('',*,*,#1032,.F.);
+#2047 = ORIENTED_EDGE('',*,*,#2048,.F.);
+#2048 = EDGE_CURVE('',#2038,#1025,#2049,.T.);
+#2049 = LINE('',#2050,#2051);
+#2050 = CARTESIAN_POINT('',(0.875,2.225,0.));
+#2051 = VECTOR('',#2052,1.);
+#2052 = DIRECTION('',(0.,0.,1.));
+#2053 = CYLINDRICAL_SURFACE('',#2054,0.125);
+#2054 = AXIS2_PLACEMENT_3D('',#2055,#2056,#2057);
+#2055 = CARTESIAN_POINT('',(0.75,2.225,0.));
+#2056 = DIRECTION('',(0.,0.,-1.));
+#2057 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2058 = ADVANCED_FACE('',(#2059),#2086,.F.);
+#2059 = FACE_BOUND('',#2060,.F.);
+#2060 = EDGE_LOOP('',(#2061,#2069,#2070,#2071,#2072,#2080));
+#2061 = ORIENTED_EDGE('',*,*,#2062,.F.);
+#2062 = EDGE_CURVE('',#2038,#2063,#2065,.T.);
+#2063 = VERTEX_POINT('',#2064);
+#2064 = CARTESIAN_POINT('',(0.875,2.5,0.));
+#2065 = LINE('',#2066,#2067);
+#2066 = CARTESIAN_POINT('',(0.875,2.225,0.));
+#2067 = VECTOR('',#2068,1.);
+#2068 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2069 = ORIENTED_EDGE('',*,*,#2048,.T.);
+#2070 = ORIENTED_EDGE('',*,*,#1024,.F.);
+#2071 = ORIENTED_EDGE('',*,*,#1440,.F.);
+#2072 = ORIENTED_EDGE('',*,*,#2073,.T.);
+#2073 = EDGE_CURVE('',#1433,#2074,#2076,.T.);
+#2074 = VERTEX_POINT('',#2075);
+#2075 = CARTESIAN_POINT('',(0.875,2.5,0.2));
+#2076 = LINE('',#2077,#2078);
+#2077 = CARTESIAN_POINT('',(0.875,2.225,0.2));
+#2078 = VECTOR('',#2079,1.);
+#2079 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2080 = ORIENTED_EDGE('',*,*,#2081,.F.);
+#2081 = EDGE_CURVE('',#2063,#2074,#2082,.T.);
+#2082 = LINE('',#2083,#2084);
+#2083 = CARTESIAN_POINT('',(0.875,2.5,0.));
+#2084 = VECTOR('',#2085,1.);
+#2085 = DIRECTION('',(0.,0.,1.));
+#2086 = PLANE('',#2087);
+#2087 = AXIS2_PLACEMENT_3D('',#2088,#2089,#2090);
+#2088 = CARTESIAN_POINT('',(0.875,2.225,0.));
+#2089 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2090 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2091 = ADVANCED_FACE('',(#2092),#2126,.F.);
+#2092 = FACE_BOUND('',#2093,.F.);
+#2093 = EDGE_LOOP('',(#2094,#2104,#2112,#2118,#2119,#2120));
+#2094 = ORIENTED_EDGE('',*,*,#2095,.F.);
+#2095 = EDGE_CURVE('',#2096,#2098,#2100,.T.);
+#2096 = VERTEX_POINT('',#2097);
+#2097 = CARTESIAN_POINT('',(1.125,2.5,0.));
+#2098 = VERTEX_POINT('',#2099);
+#2099 = CARTESIAN_POINT('',(1.125,2.225,0.));
+#2100 = LINE('',#2101,#2102);
+#2101 = CARTESIAN_POINT('',(1.125,2.5,0.));
+#2102 = VECTOR('',#2103,1.);
+#2103 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2104 = ORIENTED_EDGE('',*,*,#2105,.T.);
+#2105 = EDGE_CURVE('',#2096,#2106,#2108,.T.);
+#2106 = VERTEX_POINT('',#2107);
+#2107 = CARTESIAN_POINT('',(1.125,2.5,0.2));
+#2108 = LINE('',#2109,#2110);
+#2109 = CARTESIAN_POINT('',(1.125,2.5,0.));
+#2110 = VECTOR('',#2111,1.);
+#2111 = DIRECTION('',(0.,0.,1.));
+#2112 = ORIENTED_EDGE('',*,*,#2113,.T.);
+#2113 = EDGE_CURVE('',#2106,#1448,#2114,.T.);
+#2114 = LINE('',#2115,#2116);
+#2115 = CARTESIAN_POINT('',(1.125,2.5,0.2));
+#2116 = VECTOR('',#2117,1.);
+#2117 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2118 = ORIENTED_EDGE('',*,*,#1447,.F.);
+#2119 = ORIENTED_EDGE('',*,*,#1008,.F.);
+#2120 = ORIENTED_EDGE('',*,*,#2121,.F.);
+#2121 = EDGE_CURVE('',#2098,#1000,#2122,.T.);
+#2122 = LINE('',#2123,#2124);
+#2123 = CARTESIAN_POINT('',(1.125,2.225,0.));
+#2124 = VECTOR('',#2125,1.);
+#2125 = DIRECTION('',(0.,0.,1.));
+#2126 = PLANE('',#2127);
+#2127 = AXIS2_PLACEMENT_3D('',#2128,#2129,#2130);
+#2128 = CARTESIAN_POINT('',(1.125,2.5,0.));
+#2129 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#2130 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2131 = ADVANCED_FACE('',(#2132),#2151,.T.);
+#2132 = FACE_BOUND('',#2133,.F.);
+#2133 = EDGE_LOOP('',(#2134,#2143,#2144,#2145));
+#2134 = ORIENTED_EDGE('',*,*,#2135,.F.);
+#2135 = EDGE_CURVE('',#2098,#2136,#2138,.T.);
+#2136 = VERTEX_POINT('',#2137);
+#2137 = CARTESIAN_POINT('',(1.375,2.225,0.));
+#2138 = CIRCLE('',#2139,0.125);
+#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);
+#2140 = CARTESIAN_POINT('',(1.25,2.225,0.));
+#2141 = DIRECTION('',(0.,0.,1.));
+#2142 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2143 = ORIENTED_EDGE('',*,*,#2121,.T.);
+#2144 = ORIENTED_EDGE('',*,*,#999,.F.);
+#2145 = ORIENTED_EDGE('',*,*,#2146,.F.);
+#2146 = EDGE_CURVE('',#2136,#992,#2147,.T.);
+#2147 = LINE('',#2148,#2149);
+#2148 = CARTESIAN_POINT('',(1.375,2.225,0.));
+#2149 = VECTOR('',#2150,1.);
+#2150 = DIRECTION('',(0.,0.,1.));
+#2151 = CYLINDRICAL_SURFACE('',#2152,0.125);
+#2152 = AXIS2_PLACEMENT_3D('',#2153,#2154,#2155);
+#2153 = CARTESIAN_POINT('',(1.25,2.225,0.));
+#2154 = DIRECTION('',(0.,0.,-1.));
+#2155 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2156 = ADVANCED_FACE('',(#2157),#2184,.F.);
+#2157 = FACE_BOUND('',#2158,.F.);
+#2158 = EDGE_LOOP('',(#2159,#2167,#2168,#2169,#2170,#2178));
+#2159 = ORIENTED_EDGE('',*,*,#2160,.F.);
+#2160 = EDGE_CURVE('',#2136,#2161,#2163,.T.);
+#2161 = VERTEX_POINT('',#2162);
+#2162 = CARTESIAN_POINT('',(1.375,2.5,0.));
+#2163 = LINE('',#2164,#2165);
+#2164 = CARTESIAN_POINT('',(1.375,2.225,0.));
+#2165 = VECTOR('',#2166,1.);
+#2166 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2167 = ORIENTED_EDGE('',*,*,#2146,.T.);
+#2168 = ORIENTED_EDGE('',*,*,#991,.F.);
+#2169 = ORIENTED_EDGE('',*,*,#1463,.F.);
+#2170 = ORIENTED_EDGE('',*,*,#2171,.T.);
+#2171 = EDGE_CURVE('',#1456,#2172,#2174,.T.);
+#2172 = VERTEX_POINT('',#2173);
+#2173 = CARTESIAN_POINT('',(1.375,2.5,0.2));
+#2174 = LINE('',#2175,#2176);
+#2175 = CARTESIAN_POINT('',(1.375,2.225,0.2));
+#2176 = VECTOR('',#2177,1.);
+#2177 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2178 = ORIENTED_EDGE('',*,*,#2179,.F.);
+#2179 = EDGE_CURVE('',#2161,#2172,#2180,.T.);
+#2180 = LINE('',#2181,#2182);
+#2181 = CARTESIAN_POINT('',(1.375,2.5,0.));
+#2182 = VECTOR('',#2183,1.);
+#2183 = DIRECTION('',(0.,0.,1.));
+#2184 = PLANE('',#2185);
+#2185 = AXIS2_PLACEMENT_3D('',#2186,#2187,#2188);
+#2186 = CARTESIAN_POINT('',(1.375,2.225,0.));
+#2187 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2188 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2189 = ADVANCED_FACE('',(#2190),#2224,.F.);
+#2190 = FACE_BOUND('',#2191,.F.);
+#2191 = EDGE_LOOP('',(#2192,#2202,#2210,#2216,#2217,#2218));
+#2192 = ORIENTED_EDGE('',*,*,#2193,.F.);
+#2193 = EDGE_CURVE('',#2194,#2196,#2198,.T.);
+#2194 = VERTEX_POINT('',#2195);
+#2195 = CARTESIAN_POINT('',(1.625,2.5,0.));
+#2196 = VERTEX_POINT('',#2197);
+#2197 = CARTESIAN_POINT('',(1.625,2.225,0.));
+#2198 = LINE('',#2199,#2200);
+#2199 = CARTESIAN_POINT('',(1.625,2.5,0.));
+#2200 = VECTOR('',#2201,1.);
+#2201 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2202 = ORIENTED_EDGE('',*,*,#2203,.T.);
+#2203 = EDGE_CURVE('',#2194,#2204,#2206,.T.);
+#2204 = VERTEX_POINT('',#2205);
+#2205 = CARTESIAN_POINT('',(1.625,2.5,0.2));
+#2206 = LINE('',#2207,#2208);
+#2207 = CARTESIAN_POINT('',(1.625,2.5,0.));
+#2208 = VECTOR('',#2209,1.);
+#2209 = DIRECTION('',(0.,0.,1.));
+#2210 = ORIENTED_EDGE('',*,*,#2211,.T.);
+#2211 = EDGE_CURVE('',#2204,#1471,#2212,.T.);
+#2212 = LINE('',#2213,#2214);
+#2213 = CARTESIAN_POINT('',(1.625,2.5,0.2));
+#2214 = VECTOR('',#2215,1.);
+#2215 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2216 = ORIENTED_EDGE('',*,*,#1470,.F.);
+#2217 = ORIENTED_EDGE('',*,*,#975,.F.);
+#2218 = ORIENTED_EDGE('',*,*,#2219,.F.);
+#2219 = EDGE_CURVE('',#2196,#967,#2220,.T.);
+#2220 = LINE('',#2221,#2222);
+#2221 = CARTESIAN_POINT('',(1.625,2.225,0.));
+#2222 = VECTOR('',#2223,1.);
+#2223 = DIRECTION('',(0.,0.,1.));
+#2224 = PLANE('',#2225);
+#2225 = AXIS2_PLACEMENT_3D('',#2226,#2227,#2228);
+#2226 = CARTESIAN_POINT('',(1.625,2.5,0.));
+#2227 = DIRECTION('',(1.,-4.555315873023E-16,0.));
+#2228 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#2229 = ADVANCED_FACE('',(#2230),#2249,.T.);
+#2230 = FACE_BOUND('',#2231,.F.);
+#2231 = EDGE_LOOP('',(#2232,#2241,#2242,#2243));
+#2232 = ORIENTED_EDGE('',*,*,#2233,.F.);
+#2233 = EDGE_CURVE('',#2196,#2234,#2236,.T.);
+#2234 = VERTEX_POINT('',#2235);
+#2235 = CARTESIAN_POINT('',(1.875,2.225,0.));
+#2236 = CIRCLE('',#2237,0.125);
+#2237 = AXIS2_PLACEMENT_3D('',#2238,#2239,#2240);
+#2238 = CARTESIAN_POINT('',(1.75,2.225,0.));
+#2239 = DIRECTION('',(0.,0.,1.));
+#2240 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2241 = ORIENTED_EDGE('',*,*,#2219,.T.);
+#2242 = ORIENTED_EDGE('',*,*,#966,.F.);
+#2243 = ORIENTED_EDGE('',*,*,#2244,.F.);
+#2244 = EDGE_CURVE('',#2234,#959,#2245,.T.);
+#2245 = LINE('',#2246,#2247);
+#2246 = CARTESIAN_POINT('',(1.875,2.225,0.));
+#2247 = VECTOR('',#2248,1.);
+#2248 = DIRECTION('',(0.,0.,1.));
+#2249 = CYLINDRICAL_SURFACE('',#2250,0.125);
+#2250 = AXIS2_PLACEMENT_3D('',#2251,#2252,#2253);
+#2251 = CARTESIAN_POINT('',(1.75,2.225,0.));
+#2252 = DIRECTION('',(0.,0.,-1.));
+#2253 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2254 = ADVANCED_FACE('',(#2255),#2282,.F.);
+#2255 = FACE_BOUND('',#2256,.F.);
+#2256 = EDGE_LOOP('',(#2257,#2265,#2266,#2267,#2268,#2276));
+#2257 = ORIENTED_EDGE('',*,*,#2258,.F.);
+#2258 = EDGE_CURVE('',#2234,#2259,#2261,.T.);
+#2259 = VERTEX_POINT('',#2260);
+#2260 = CARTESIAN_POINT('',(1.875,2.5,0.));
+#2261 = LINE('',#2262,#2263);
+#2262 = CARTESIAN_POINT('',(1.875,2.225,0.));
+#2263 = VECTOR('',#2264,1.);
+#2264 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2265 = ORIENTED_EDGE('',*,*,#2244,.T.);
+#2266 = ORIENTED_EDGE('',*,*,#958,.F.);
+#2267 = ORIENTED_EDGE('',*,*,#1486,.F.);
+#2268 = ORIENTED_EDGE('',*,*,#2269,.T.);
+#2269 = EDGE_CURVE('',#1479,#2270,#2272,.T.);
+#2270 = VERTEX_POINT('',#2271);
+#2271 = CARTESIAN_POINT('',(1.875,2.5,0.2));
+#2272 = LINE('',#2273,#2274);
+#2273 = CARTESIAN_POINT('',(1.875,2.225,0.2));
+#2274 = VECTOR('',#2275,1.);
+#2275 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2276 = ORIENTED_EDGE('',*,*,#2277,.F.);
+#2277 = EDGE_CURVE('',#2259,#2270,#2278,.T.);
+#2278 = LINE('',#2279,#2280);
+#2279 = CARTESIAN_POINT('',(1.875,2.5,0.));
+#2280 = VECTOR('',#2281,1.);
+#2281 = DIRECTION('',(0.,0.,1.));
+#2282 = PLANE('',#2283);
+#2283 = AXIS2_PLACEMENT_3D('',#2284,#2285,#2286);
+#2284 = CARTESIAN_POINT('',(1.875,2.225,0.));
+#2285 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#2286 = DIRECTION('',(4.555315873023E-16,1.,0.));
+#2287 = ADVANCED_FACE('',(#2288),#2490,.T.);
+#2288 = FACE_BOUND('',#2289,.T.);
+#2289 = EDGE_LOOP('',(#2290,#2291,#2292,#2300,#2306,#2307,#2315,#2323,
+#2329,#2330,#2338,#2346,#2352,#2353,#2361,#2369,#2375,#2376,#2384,
+#2392,#2398,#2399,#2407,#2415,#2421,#2422,#2430,#2438,#2444,#2445,
+#2453,#2461,#2467,#2468,#2476,#2484));
+#2290 = ORIENTED_EDGE('',*,*,#942,.F.);
+#2291 = ORIENTED_EDGE('',*,*,#1493,.T.);
+#2292 = ORIENTED_EDGE('',*,*,#2293,.T.);
+#2293 = EDGE_CURVE('',#1295,#2294,#2296,.T.);
+#2294 = VERTEX_POINT('',#2295);
+#2295 = CARTESIAN_POINT('',(2.4875,-2.4875,0.875));
+#2296 = LINE('',#2297,#2298);
+#2297 = CARTESIAN_POINT('',(2.4875,2.4875,0.875));
+#2298 = VECTOR('',#2299,1.);
+#2299 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2300 = ORIENTED_EDGE('',*,*,#2301,.F.);
+#2301 = EDGE_CURVE('',#671,#2294,#2302,.T.);
+#2302 = LINE('',#2303,#2304);
+#2303 = CARTESIAN_POINT('',(2.4875,-2.4875,2.5E-02));
+#2304 = VECTOR('',#2305,1.);
+#2305 = DIRECTION('',(0.,0.,1.));
+#2306 = ORIENTED_EDGE('',*,*,#678,.F.);
+#2307 = ORIENTED_EDGE('',*,*,#2308,.T.);
+#2308 = EDGE_CURVE('',#679,#2309,#2311,.T.);
+#2309 = VERTEX_POINT('',#2310);
+#2310 = CARTESIAN_POINT('',(2.4875,-1.875,0.2));
+#2311 = LINE('',#2312,#2313);
+#2312 = CARTESIAN_POINT('',(2.4875,-1.875,1.25E-02));
+#2313 = VECTOR('',#2314,1.);
+#2314 = DIRECTION('',(0.,0.,1.));
+#2315 = ORIENTED_EDGE('',*,*,#2316,.F.);
+#2316 = EDGE_CURVE('',#2317,#2309,#2319,.T.);
+#2317 = VERTEX_POINT('',#2318);
+#2318 = CARTESIAN_POINT('',(2.4875,-1.625,0.2));
+#2319 = LINE('',#2320,#2321);
+#2320 = CARTESIAN_POINT('',(2.4875,0.36875,0.2));
+#2321 = VECTOR('',#2322,1.);
+#2322 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2323 = ORIENTED_EDGE('',*,*,#2324,.T.);
+#2324 = EDGE_CURVE('',#2317,#704,#2325,.T.);
+#2325 = LINE('',#2326,#2327);
+#2326 = CARTESIAN_POINT('',(2.4875,-1.625,1.25E-02));
+#2327 = VECTOR('',#2328,1.);
+#2328 = DIRECTION('',(0.,-0.,-1.));
+#2329 = ORIENTED_EDGE('',*,*,#711,.F.);
+#2330 = ORIENTED_EDGE('',*,*,#2331,.T.);
+#2331 = EDGE_CURVE('',#712,#2332,#2334,.T.);
+#2332 = VERTEX_POINT('',#2333);
+#2333 = CARTESIAN_POINT('',(2.4875,-1.375,0.2));
+#2334 = LINE('',#2335,#2336);
+#2335 = CARTESIAN_POINT('',(2.4875,-1.375,1.25E-02));
+#2336 = VECTOR('',#2337,1.);
+#2337 = DIRECTION('',(0.,0.,1.));
+#2338 = ORIENTED_EDGE('',*,*,#2339,.F.);
+#2339 = EDGE_CURVE('',#2340,#2332,#2342,.T.);
+#2340 = VERTEX_POINT('',#2341);
+#2341 = CARTESIAN_POINT('',(2.4875,-1.125,0.2));
+#2342 = LINE('',#2343,#2344);
+#2343 = CARTESIAN_POINT('',(2.4875,0.61875,0.2));
+#2344 = VECTOR('',#2345,1.);
+#2345 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2346 = ORIENTED_EDGE('',*,*,#2347,.T.);
+#2347 = EDGE_CURVE('',#2340,#737,#2348,.T.);
+#2348 = LINE('',#2349,#2350);
+#2349 = CARTESIAN_POINT('',(2.4875,-1.125,1.25E-02));
+#2350 = VECTOR('',#2351,1.);
+#2351 = DIRECTION('',(0.,-0.,-1.));
+#2352 = ORIENTED_EDGE('',*,*,#744,.F.);
+#2353 = ORIENTED_EDGE('',*,*,#2354,.T.);
+#2354 = EDGE_CURVE('',#745,#2355,#2357,.T.);
+#2355 = VERTEX_POINT('',#2356);
+#2356 = CARTESIAN_POINT('',(2.4875,-0.875,0.2));
+#2357 = LINE('',#2358,#2359);
+#2358 = CARTESIAN_POINT('',(2.4875,-0.875,1.25E-02));
+#2359 = VECTOR('',#2360,1.);
+#2360 = DIRECTION('',(0.,0.,1.));
+#2361 = ORIENTED_EDGE('',*,*,#2362,.F.);
+#2362 = EDGE_CURVE('',#2363,#2355,#2365,.T.);
+#2363 = VERTEX_POINT('',#2364);
+#2364 = CARTESIAN_POINT('',(2.4875,-0.625,0.2));
+#2365 = LINE('',#2366,#2367);
+#2366 = CARTESIAN_POINT('',(2.4875,0.86875,0.2));
+#2367 = VECTOR('',#2368,1.);
+#2368 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2369 = ORIENTED_EDGE('',*,*,#2370,.T.);
+#2370 = EDGE_CURVE('',#2363,#770,#2371,.T.);
+#2371 = LINE('',#2372,#2373);
+#2372 = CARTESIAN_POINT('',(2.4875,-0.625,1.25E-02));
+#2373 = VECTOR('',#2374,1.);
+#2374 = DIRECTION('',(0.,-0.,-1.));
+#2375 = ORIENTED_EDGE('',*,*,#777,.F.);
+#2376 = ORIENTED_EDGE('',*,*,#2377,.T.);
+#2377 = EDGE_CURVE('',#778,#2378,#2380,.T.);
+#2378 = VERTEX_POINT('',#2379);
+#2379 = CARTESIAN_POINT('',(2.4875,-0.375,0.2));
+#2380 = LINE('',#2381,#2382);
+#2381 = CARTESIAN_POINT('',(2.4875,-0.375,1.25E-02));
+#2382 = VECTOR('',#2383,1.);
+#2383 = DIRECTION('',(0.,0.,1.));
+#2384 = ORIENTED_EDGE('',*,*,#2385,.F.);
+#2385 = EDGE_CURVE('',#2386,#2378,#2388,.T.);
+#2386 = VERTEX_POINT('',#2387);
+#2387 = CARTESIAN_POINT('',(2.4875,-0.125,0.2));
+#2388 = LINE('',#2389,#2390);
+#2389 = CARTESIAN_POINT('',(2.4875,1.11875,0.2));
+#2390 = VECTOR('',#2391,1.);
+#2391 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2392 = ORIENTED_EDGE('',*,*,#2393,.T.);
+#2393 = EDGE_CURVE('',#2386,#803,#2394,.T.);
+#2394 = LINE('',#2395,#2396);
+#2395 = CARTESIAN_POINT('',(2.4875,-0.125,1.25E-02));
+#2396 = VECTOR('',#2397,1.);
+#2397 = DIRECTION('',(0.,-0.,-1.));
+#2398 = ORIENTED_EDGE('',*,*,#810,.F.);
+#2399 = ORIENTED_EDGE('',*,*,#2400,.T.);
+#2400 = EDGE_CURVE('',#811,#2401,#2403,.T.);
+#2401 = VERTEX_POINT('',#2402);
+#2402 = CARTESIAN_POINT('',(2.4875,0.125,0.2));
+#2403 = LINE('',#2404,#2405);
+#2404 = CARTESIAN_POINT('',(2.4875,0.125,1.25E-02));
+#2405 = VECTOR('',#2406,1.);
+#2406 = DIRECTION('',(0.,0.,1.));
+#2407 = ORIENTED_EDGE('',*,*,#2408,.F.);
+#2408 = EDGE_CURVE('',#2409,#2401,#2411,.T.);
+#2409 = VERTEX_POINT('',#2410);
+#2410 = CARTESIAN_POINT('',(2.4875,0.375,0.2));
+#2411 = LINE('',#2412,#2413);
+#2412 = CARTESIAN_POINT('',(2.4875,1.36875,0.2));
+#2413 = VECTOR('',#2414,1.);
+#2414 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2415 = ORIENTED_EDGE('',*,*,#2416,.T.);
+#2416 = EDGE_CURVE('',#2409,#836,#2417,.T.);
+#2417 = LINE('',#2418,#2419);
+#2418 = CARTESIAN_POINT('',(2.4875,0.375,1.25E-02));
+#2419 = VECTOR('',#2420,1.);
+#2420 = DIRECTION('',(0.,-0.,-1.));
+#2421 = ORIENTED_EDGE('',*,*,#843,.F.);
+#2422 = ORIENTED_EDGE('',*,*,#2423,.T.);
+#2423 = EDGE_CURVE('',#844,#2424,#2426,.T.);
+#2424 = VERTEX_POINT('',#2425);
+#2425 = CARTESIAN_POINT('',(2.4875,0.625,0.2));
+#2426 = LINE('',#2427,#2428);
+#2427 = CARTESIAN_POINT('',(2.4875,0.625,1.25E-02));
+#2428 = VECTOR('',#2429,1.);
+#2429 = DIRECTION('',(0.,0.,1.));
+#2430 = ORIENTED_EDGE('',*,*,#2431,.F.);
+#2431 = EDGE_CURVE('',#2432,#2424,#2434,.T.);
+#2432 = VERTEX_POINT('',#2433);
+#2433 = CARTESIAN_POINT('',(2.4875,0.875,0.2));
+#2434 = LINE('',#2435,#2436);
+#2435 = CARTESIAN_POINT('',(2.4875,1.61875,0.2));
+#2436 = VECTOR('',#2437,1.);
+#2437 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2438 = ORIENTED_EDGE('',*,*,#2439,.T.);
+#2439 = EDGE_CURVE('',#2432,#869,#2440,.T.);
+#2440 = LINE('',#2441,#2442);
+#2441 = CARTESIAN_POINT('',(2.4875,0.875,1.25E-02));
+#2442 = VECTOR('',#2443,1.);
+#2443 = DIRECTION('',(0.,-0.,-1.));
+#2444 = ORIENTED_EDGE('',*,*,#876,.F.);
+#2445 = ORIENTED_EDGE('',*,*,#2446,.T.);
+#2446 = EDGE_CURVE('',#877,#2447,#2449,.T.);
+#2447 = VERTEX_POINT('',#2448);
+#2448 = CARTESIAN_POINT('',(2.4875,1.125,0.2));
+#2449 = LINE('',#2450,#2451);
+#2450 = CARTESIAN_POINT('',(2.4875,1.125,1.25E-02));
+#2451 = VECTOR('',#2452,1.);
+#2452 = DIRECTION('',(0.,0.,1.));
+#2453 = ORIENTED_EDGE('',*,*,#2454,.F.);
+#2454 = EDGE_CURVE('',#2455,#2447,#2457,.T.);
+#2455 = VERTEX_POINT('',#2456);
+#2456 = CARTESIAN_POINT('',(2.4875,1.375,0.2));
+#2457 = LINE('',#2458,#2459);
+#2458 = CARTESIAN_POINT('',(2.4875,1.86875,0.2));
+#2459 = VECTOR('',#2460,1.);
+#2460 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2461 = ORIENTED_EDGE('',*,*,#2462,.T.);
+#2462 = EDGE_CURVE('',#2455,#902,#2463,.T.);
+#2463 = LINE('',#2464,#2465);
+#2464 = CARTESIAN_POINT('',(2.4875,1.375,1.25E-02));
+#2465 = VECTOR('',#2466,1.);
+#2466 = DIRECTION('',(0.,-0.,-1.));
+#2467 = ORIENTED_EDGE('',*,*,#909,.F.);
+#2468 = ORIENTED_EDGE('',*,*,#2469,.T.);
+#2469 = EDGE_CURVE('',#910,#2470,#2472,.T.);
+#2470 = VERTEX_POINT('',#2471);
+#2471 = CARTESIAN_POINT('',(2.4875,1.625,0.2));
+#2472 = LINE('',#2473,#2474);
+#2473 = CARTESIAN_POINT('',(2.4875,1.625,1.25E-02));
+#2474 = VECTOR('',#2475,1.);
+#2475 = DIRECTION('',(0.,0.,1.));
+#2476 = ORIENTED_EDGE('',*,*,#2477,.F.);
+#2477 = EDGE_CURVE('',#2478,#2470,#2480,.T.);
+#2478 = VERTEX_POINT('',#2479);
+#2479 = CARTESIAN_POINT('',(2.4875,1.875,0.2));
+#2480 = LINE('',#2481,#2482);
+#2481 = CARTESIAN_POINT('',(2.4875,2.11875,0.2));
+#2482 = VECTOR('',#2483,1.);
+#2483 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#2484 = ORIENTED_EDGE('',*,*,#2485,.T.);
+#2485 = EDGE_CURVE('',#2478,#935,#2486,.T.);
+#2486 = LINE('',#2487,#2488);
+#2487 = CARTESIAN_POINT('',(2.4875,1.875,1.25E-02));
+#2488 = VECTOR('',#2489,1.);
+#2489 = DIRECTION('',(0.,-0.,-1.));
+#2490 = PLANE('',#2491);
+#2491 = AXIS2_PLACEMENT_3D('',#2492,#2493,#2494);
+#2492 = CARTESIAN_POINT('',(2.4875,2.4875,2.5E-02));
+#2493 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#2494 = DIRECTION('',(0.,0.,1.));
+#2495 = ADVANCED_FACE('',(#2496),#2530,.F.);
+#2496 = FACE_BOUND('',#2497,.F.);
+#2497 = EDGE_LOOP('',(#2498,#2508,#2516,#2522,#2523,#2524));
+#2498 = ORIENTED_EDGE('',*,*,#2499,.F.);
+#2499 = EDGE_CURVE('',#2500,#2502,#2504,.T.);
+#2500 = VERTEX_POINT('',#2501);
+#2501 = CARTESIAN_POINT('',(2.5,1.875,0.));
+#2502 = VERTEX_POINT('',#2503);
+#2503 = CARTESIAN_POINT('',(2.225,1.875,0.));
+#2504 = LINE('',#2505,#2506);
+#2505 = CARTESIAN_POINT('',(2.5,1.875,0.));
+#2506 = VECTOR('',#2507,1.);
+#2507 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2508 = ORIENTED_EDGE('',*,*,#2509,.T.);
+#2509 = EDGE_CURVE('',#2500,#2510,#2512,.T.);
+#2510 = VERTEX_POINT('',#2511);
+#2511 = CARTESIAN_POINT('',(2.5,1.875,0.2));
+#2512 = LINE('',#2513,#2514);
+#2513 = CARTESIAN_POINT('',(2.5,1.875,0.));
+#2514 = VECTOR('',#2515,1.);
+#2515 = DIRECTION('',(0.,0.,1.));
+#2516 = ORIENTED_EDGE('',*,*,#2517,.T.);
+#2517 = EDGE_CURVE('',#2510,#2478,#2518,.T.);
+#2518 = LINE('',#2519,#2520);
+#2519 = CARTESIAN_POINT('',(2.5,1.875,0.2));
+#2520 = VECTOR('',#2521,1.);
+#2521 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2522 = ORIENTED_EDGE('',*,*,#2485,.T.);
+#2523 = ORIENTED_EDGE('',*,*,#934,.F.);
+#2524 = ORIENTED_EDGE('',*,*,#2525,.F.);
+#2525 = EDGE_CURVE('',#2502,#926,#2526,.T.);
+#2526 = LINE('',#2527,#2528);
+#2527 = CARTESIAN_POINT('',(2.225,1.875,0.));
+#2528 = VECTOR('',#2529,1.);
+#2529 = DIRECTION('',(0.,0.,1.));
+#2530 = PLANE('',#2531);
+#2531 = AXIS2_PLACEMENT_3D('',#2532,#2533,#2534);
+#2532 = CARTESIAN_POINT('',(2.5,1.875,0.));
+#2533 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#2534 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2535 = ADVANCED_FACE('',(#2536),#2555,.T.);
+#2536 = FACE_BOUND('',#2537,.F.);
+#2537 = EDGE_LOOP('',(#2538,#2547,#2548,#2549));
+#2538 = ORIENTED_EDGE('',*,*,#2539,.F.);
+#2539 = EDGE_CURVE('',#2502,#2540,#2542,.T.);
+#2540 = VERTEX_POINT('',#2541);
+#2541 = CARTESIAN_POINT('',(2.225,1.625,0.));
+#2542 = CIRCLE('',#2543,0.125);
+#2543 = AXIS2_PLACEMENT_3D('',#2544,#2545,#2546);
+#2544 = CARTESIAN_POINT('',(2.225,1.75,0.));
+#2545 = DIRECTION('',(0.,-0.,1.));
+#2546 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2547 = ORIENTED_EDGE('',*,*,#2525,.T.);
+#2548 = ORIENTED_EDGE('',*,*,#925,.F.);
+#2549 = ORIENTED_EDGE('',*,*,#2550,.F.);
+#2550 = EDGE_CURVE('',#2540,#918,#2551,.T.);
+#2551 = LINE('',#2552,#2553);
+#2552 = CARTESIAN_POINT('',(2.225,1.625,0.));
+#2553 = VECTOR('',#2554,1.);
+#2554 = DIRECTION('',(0.,0.,1.));
+#2555 = CYLINDRICAL_SURFACE('',#2556,0.125);
+#2556 = AXIS2_PLACEMENT_3D('',#2557,#2558,#2559);
+#2557 = CARTESIAN_POINT('',(2.225,1.75,0.));
+#2558 = DIRECTION('',(0.,-0.,-1.));
+#2559 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2560 = ADVANCED_FACE('',(#2561),#2588,.F.);
+#2561 = FACE_BOUND('',#2562,.F.);
+#2562 = EDGE_LOOP('',(#2563,#2571,#2572,#2573,#2574,#2582));
+#2563 = ORIENTED_EDGE('',*,*,#2564,.F.);
+#2564 = EDGE_CURVE('',#2540,#2565,#2567,.T.);
+#2565 = VERTEX_POINT('',#2566);
+#2566 = CARTESIAN_POINT('',(2.5,1.625,0.));
+#2567 = LINE('',#2568,#2569);
+#2568 = CARTESIAN_POINT('',(2.225,1.625,0.));
+#2569 = VECTOR('',#2570,1.);
+#2570 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2571 = ORIENTED_EDGE('',*,*,#2550,.T.);
+#2572 = ORIENTED_EDGE('',*,*,#917,.F.);
+#2573 = ORIENTED_EDGE('',*,*,#2469,.T.);
+#2574 = ORIENTED_EDGE('',*,*,#2575,.T.);
+#2575 = EDGE_CURVE('',#2470,#2576,#2578,.T.);
+#2576 = VERTEX_POINT('',#2577);
+#2577 = CARTESIAN_POINT('',(2.5,1.625,0.2));
+#2578 = LINE('',#2579,#2580);
+#2579 = CARTESIAN_POINT('',(2.225,1.625,0.2));
+#2580 = VECTOR('',#2581,1.);
+#2581 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2582 = ORIENTED_EDGE('',*,*,#2583,.F.);
+#2583 = EDGE_CURVE('',#2565,#2576,#2584,.T.);
+#2584 = LINE('',#2585,#2586);
+#2585 = CARTESIAN_POINT('',(2.5,1.625,0.));
+#2586 = VECTOR('',#2587,1.);
+#2587 = DIRECTION('',(0.,0.,1.));
+#2588 = PLANE('',#2589);
+#2589 = AXIS2_PLACEMENT_3D('',#2590,#2591,#2592);
+#2590 = CARTESIAN_POINT('',(2.225,1.625,0.));
+#2591 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2592 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2593 = ADVANCED_FACE('',(#2594),#2628,.F.);
+#2594 = FACE_BOUND('',#2595,.F.);
+#2595 = EDGE_LOOP('',(#2596,#2606,#2614,#2620,#2621,#2622));
+#2596 = ORIENTED_EDGE('',*,*,#2597,.F.);
+#2597 = EDGE_CURVE('',#2598,#2600,#2602,.T.);
+#2598 = VERTEX_POINT('',#2599);
+#2599 = CARTESIAN_POINT('',(2.5,1.375,0.));
+#2600 = VERTEX_POINT('',#2601);
+#2601 = CARTESIAN_POINT('',(2.225,1.375,0.));
+#2602 = LINE('',#2603,#2604);
+#2603 = CARTESIAN_POINT('',(2.5,1.375,0.));
+#2604 = VECTOR('',#2605,1.);
+#2605 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2606 = ORIENTED_EDGE('',*,*,#2607,.T.);
+#2607 = EDGE_CURVE('',#2598,#2608,#2610,.T.);
+#2608 = VERTEX_POINT('',#2609);
+#2609 = CARTESIAN_POINT('',(2.5,1.375,0.2));
+#2610 = LINE('',#2611,#2612);
+#2611 = CARTESIAN_POINT('',(2.5,1.375,0.));
+#2612 = VECTOR('',#2613,1.);
+#2613 = DIRECTION('',(0.,0.,1.));
+#2614 = ORIENTED_EDGE('',*,*,#2615,.T.);
+#2615 = EDGE_CURVE('',#2608,#2455,#2616,.T.);
+#2616 = LINE('',#2617,#2618);
+#2617 = CARTESIAN_POINT('',(2.5,1.375,0.2));
+#2618 = VECTOR('',#2619,1.);
+#2619 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2620 = ORIENTED_EDGE('',*,*,#2462,.T.);
+#2621 = ORIENTED_EDGE('',*,*,#901,.F.);
+#2622 = ORIENTED_EDGE('',*,*,#2623,.F.);
+#2623 = EDGE_CURVE('',#2600,#893,#2624,.T.);
+#2624 = LINE('',#2625,#2626);
+#2625 = CARTESIAN_POINT('',(2.225,1.375,0.));
+#2626 = VECTOR('',#2627,1.);
+#2627 = DIRECTION('',(0.,0.,1.));
+#2628 = PLANE('',#2629);
+#2629 = AXIS2_PLACEMENT_3D('',#2630,#2631,#2632);
+#2630 = CARTESIAN_POINT('',(2.5,1.375,0.));
+#2631 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#2632 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2633 = ADVANCED_FACE('',(#2634),#2653,.T.);
+#2634 = FACE_BOUND('',#2635,.F.);
+#2635 = EDGE_LOOP('',(#2636,#2645,#2646,#2647));
+#2636 = ORIENTED_EDGE('',*,*,#2637,.F.);
+#2637 = EDGE_CURVE('',#2600,#2638,#2640,.T.);
+#2638 = VERTEX_POINT('',#2639);
+#2639 = CARTESIAN_POINT('',(2.225,1.125,0.));
+#2640 = CIRCLE('',#2641,0.125);
+#2641 = AXIS2_PLACEMENT_3D('',#2642,#2643,#2644);
+#2642 = CARTESIAN_POINT('',(2.225,1.25,0.));
+#2643 = DIRECTION('',(0.,-0.,1.));
+#2644 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2645 = ORIENTED_EDGE('',*,*,#2623,.T.);
+#2646 = ORIENTED_EDGE('',*,*,#892,.F.);
+#2647 = ORIENTED_EDGE('',*,*,#2648,.F.);
+#2648 = EDGE_CURVE('',#2638,#885,#2649,.T.);
+#2649 = LINE('',#2650,#2651);
+#2650 = CARTESIAN_POINT('',(2.225,1.125,0.));
+#2651 = VECTOR('',#2652,1.);
+#2652 = DIRECTION('',(0.,0.,1.));
+#2653 = CYLINDRICAL_SURFACE('',#2654,0.125);
+#2654 = AXIS2_PLACEMENT_3D('',#2655,#2656,#2657);
+#2655 = CARTESIAN_POINT('',(2.225,1.25,0.));
+#2656 = DIRECTION('',(0.,-0.,-1.));
+#2657 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2658 = ADVANCED_FACE('',(#2659),#2686,.F.);
+#2659 = FACE_BOUND('',#2660,.F.);
+#2660 = EDGE_LOOP('',(#2661,#2669,#2670,#2671,#2672,#2680));
+#2661 = ORIENTED_EDGE('',*,*,#2662,.F.);
+#2662 = EDGE_CURVE('',#2638,#2663,#2665,.T.);
+#2663 = VERTEX_POINT('',#2664);
+#2664 = CARTESIAN_POINT('',(2.5,1.125,0.));
+#2665 = LINE('',#2666,#2667);
+#2666 = CARTESIAN_POINT('',(2.225,1.125,0.));
+#2667 = VECTOR('',#2668,1.);
+#2668 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2669 = ORIENTED_EDGE('',*,*,#2648,.T.);
+#2670 = ORIENTED_EDGE('',*,*,#884,.F.);
+#2671 = ORIENTED_EDGE('',*,*,#2446,.T.);
+#2672 = ORIENTED_EDGE('',*,*,#2673,.T.);
+#2673 = EDGE_CURVE('',#2447,#2674,#2676,.T.);
+#2674 = VERTEX_POINT('',#2675);
+#2675 = CARTESIAN_POINT('',(2.5,1.125,0.2));
+#2676 = LINE('',#2677,#2678);
+#2677 = CARTESIAN_POINT('',(2.225,1.125,0.2));
+#2678 = VECTOR('',#2679,1.);
+#2679 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2680 = ORIENTED_EDGE('',*,*,#2681,.F.);
+#2681 = EDGE_CURVE('',#2663,#2674,#2682,.T.);
+#2682 = LINE('',#2683,#2684);
+#2683 = CARTESIAN_POINT('',(2.5,1.125,0.));
+#2684 = VECTOR('',#2685,1.);
+#2685 = DIRECTION('',(0.,0.,1.));
+#2686 = PLANE('',#2687);
+#2687 = AXIS2_PLACEMENT_3D('',#2688,#2689,#2690);
+#2688 = CARTESIAN_POINT('',(2.225,1.125,0.));
+#2689 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2690 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2691 = ADVANCED_FACE('',(#2692),#2726,.F.);
+#2692 = FACE_BOUND('',#2693,.F.);
+#2693 = EDGE_LOOP('',(#2694,#2704,#2712,#2718,#2719,#2720));
+#2694 = ORIENTED_EDGE('',*,*,#2695,.F.);
+#2695 = EDGE_CURVE('',#2696,#2698,#2700,.T.);
+#2696 = VERTEX_POINT('',#2697);
+#2697 = CARTESIAN_POINT('',(2.5,0.875,0.));
+#2698 = VERTEX_POINT('',#2699);
+#2699 = CARTESIAN_POINT('',(2.225,0.875,0.));
+#2700 = LINE('',#2701,#2702);
+#2701 = CARTESIAN_POINT('',(2.5,0.875,0.));
+#2702 = VECTOR('',#2703,1.);
+#2703 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2704 = ORIENTED_EDGE('',*,*,#2705,.T.);
+#2705 = EDGE_CURVE('',#2696,#2706,#2708,.T.);
+#2706 = VERTEX_POINT('',#2707);
+#2707 = CARTESIAN_POINT('',(2.5,0.875,0.2));
+#2708 = LINE('',#2709,#2710);
+#2709 = CARTESIAN_POINT('',(2.5,0.875,0.));
+#2710 = VECTOR('',#2711,1.);
+#2711 = DIRECTION('',(0.,0.,1.));
+#2712 = ORIENTED_EDGE('',*,*,#2713,.T.);
+#2713 = EDGE_CURVE('',#2706,#2432,#2714,.T.);
+#2714 = LINE('',#2715,#2716);
+#2715 = CARTESIAN_POINT('',(2.5,0.875,0.2));
+#2716 = VECTOR('',#2717,1.);
+#2717 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2718 = ORIENTED_EDGE('',*,*,#2439,.T.);
+#2719 = ORIENTED_EDGE('',*,*,#868,.F.);
+#2720 = ORIENTED_EDGE('',*,*,#2721,.F.);
+#2721 = EDGE_CURVE('',#2698,#860,#2722,.T.);
+#2722 = LINE('',#2723,#2724);
+#2723 = CARTESIAN_POINT('',(2.225,0.875,0.));
+#2724 = VECTOR('',#2725,1.);
+#2725 = DIRECTION('',(0.,0.,1.));
+#2726 = PLANE('',#2727);
+#2727 = AXIS2_PLACEMENT_3D('',#2728,#2729,#2730);
+#2728 = CARTESIAN_POINT('',(2.5,0.875,0.));
+#2729 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#2730 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2731 = ADVANCED_FACE('',(#2732),#2751,.T.);
+#2732 = FACE_BOUND('',#2733,.F.);
+#2733 = EDGE_LOOP('',(#2734,#2743,#2744,#2745));
+#2734 = ORIENTED_EDGE('',*,*,#2735,.F.);
+#2735 = EDGE_CURVE('',#2698,#2736,#2738,.T.);
+#2736 = VERTEX_POINT('',#2737);
+#2737 = CARTESIAN_POINT('',(2.225,0.625,0.));
+#2738 = CIRCLE('',#2739,0.125);
+#2739 = AXIS2_PLACEMENT_3D('',#2740,#2741,#2742);
+#2740 = CARTESIAN_POINT('',(2.225,0.75,0.));
+#2741 = DIRECTION('',(0.,-0.,1.));
+#2742 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2743 = ORIENTED_EDGE('',*,*,#2721,.T.);
+#2744 = ORIENTED_EDGE('',*,*,#859,.F.);
+#2745 = ORIENTED_EDGE('',*,*,#2746,.F.);
+#2746 = EDGE_CURVE('',#2736,#852,#2747,.T.);
+#2747 = LINE('',#2748,#2749);
+#2748 = CARTESIAN_POINT('',(2.225,0.625,0.));
+#2749 = VECTOR('',#2750,1.);
+#2750 = DIRECTION('',(0.,0.,1.));
+#2751 = CYLINDRICAL_SURFACE('',#2752,0.125);
+#2752 = AXIS2_PLACEMENT_3D('',#2753,#2754,#2755);
+#2753 = CARTESIAN_POINT('',(2.225,0.75,0.));
+#2754 = DIRECTION('',(0.,-0.,-1.));
+#2755 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2756 = ADVANCED_FACE('',(#2757),#2784,.F.);
+#2757 = FACE_BOUND('',#2758,.F.);
+#2758 = EDGE_LOOP('',(#2759,#2767,#2768,#2769,#2770,#2778));
+#2759 = ORIENTED_EDGE('',*,*,#2760,.F.);
+#2760 = EDGE_CURVE('',#2736,#2761,#2763,.T.);
+#2761 = VERTEX_POINT('',#2762);
+#2762 = CARTESIAN_POINT('',(2.5,0.625,0.));
+#2763 = LINE('',#2764,#2765);
+#2764 = CARTESIAN_POINT('',(2.225,0.625,0.));
+#2765 = VECTOR('',#2766,1.);
+#2766 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2767 = ORIENTED_EDGE('',*,*,#2746,.T.);
+#2768 = ORIENTED_EDGE('',*,*,#851,.F.);
+#2769 = ORIENTED_EDGE('',*,*,#2423,.T.);
+#2770 = ORIENTED_EDGE('',*,*,#2771,.T.);
+#2771 = EDGE_CURVE('',#2424,#2772,#2774,.T.);
+#2772 = VERTEX_POINT('',#2773);
+#2773 = CARTESIAN_POINT('',(2.5,0.625,0.2));
+#2774 = LINE('',#2775,#2776);
+#2775 = CARTESIAN_POINT('',(2.225,0.625,0.2));
+#2776 = VECTOR('',#2777,1.);
+#2777 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2778 = ORIENTED_EDGE('',*,*,#2779,.F.);
+#2779 = EDGE_CURVE('',#2761,#2772,#2780,.T.);
+#2780 = LINE('',#2781,#2782);
+#2781 = CARTESIAN_POINT('',(2.5,0.625,0.));
+#2782 = VECTOR('',#2783,1.);
+#2783 = DIRECTION('',(0.,0.,1.));
+#2784 = PLANE('',#2785);
+#2785 = AXIS2_PLACEMENT_3D('',#2786,#2787,#2788);
+#2786 = CARTESIAN_POINT('',(2.225,0.625,0.));
+#2787 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2788 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2789 = ADVANCED_FACE('',(#2790),#2824,.F.);
+#2790 = FACE_BOUND('',#2791,.F.);
+#2791 = EDGE_LOOP('',(#2792,#2802,#2810,#2816,#2817,#2818));
+#2792 = ORIENTED_EDGE('',*,*,#2793,.F.);
+#2793 = EDGE_CURVE('',#2794,#2796,#2798,.T.);
+#2794 = VERTEX_POINT('',#2795);
+#2795 = CARTESIAN_POINT('',(2.5,0.375,0.));
+#2796 = VERTEX_POINT('',#2797);
+#2797 = CARTESIAN_POINT('',(2.225,0.375,0.));
+#2798 = LINE('',#2799,#2800);
+#2799 = CARTESIAN_POINT('',(2.5,0.375,0.));
+#2800 = VECTOR('',#2801,1.);
+#2801 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2802 = ORIENTED_EDGE('',*,*,#2803,.T.);
+#2803 = EDGE_CURVE('',#2794,#2804,#2806,.T.);
+#2804 = VERTEX_POINT('',#2805);
+#2805 = CARTESIAN_POINT('',(2.5,0.375,0.2));
+#2806 = LINE('',#2807,#2808);
+#2807 = CARTESIAN_POINT('',(2.5,0.375,0.));
+#2808 = VECTOR('',#2809,1.);
+#2809 = DIRECTION('',(0.,0.,1.));
+#2810 = ORIENTED_EDGE('',*,*,#2811,.T.);
+#2811 = EDGE_CURVE('',#2804,#2409,#2812,.T.);
+#2812 = LINE('',#2813,#2814);
+#2813 = CARTESIAN_POINT('',(2.5,0.375,0.2));
+#2814 = VECTOR('',#2815,1.);
+#2815 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2816 = ORIENTED_EDGE('',*,*,#2416,.T.);
+#2817 = ORIENTED_EDGE('',*,*,#835,.F.);
+#2818 = ORIENTED_EDGE('',*,*,#2819,.F.);
+#2819 = EDGE_CURVE('',#2796,#827,#2820,.T.);
+#2820 = LINE('',#2821,#2822);
+#2821 = CARTESIAN_POINT('',(2.225,0.375,0.));
+#2822 = VECTOR('',#2823,1.);
+#2823 = DIRECTION('',(0.,0.,1.));
+#2824 = PLANE('',#2825);
+#2825 = AXIS2_PLACEMENT_3D('',#2826,#2827,#2828);
+#2826 = CARTESIAN_POINT('',(2.5,0.375,0.));
+#2827 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#2828 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2829 = ADVANCED_FACE('',(#2830),#2849,.T.);
+#2830 = FACE_BOUND('',#2831,.F.);
+#2831 = EDGE_LOOP('',(#2832,#2841,#2842,#2843));
+#2832 = ORIENTED_EDGE('',*,*,#2833,.F.);
+#2833 = EDGE_CURVE('',#2796,#2834,#2836,.T.);
+#2834 = VERTEX_POINT('',#2835);
+#2835 = CARTESIAN_POINT('',(2.225,0.125,0.));
+#2836 = CIRCLE('',#2837,0.125);
+#2837 = AXIS2_PLACEMENT_3D('',#2838,#2839,#2840);
+#2838 = CARTESIAN_POINT('',(2.225,0.25,0.));
+#2839 = DIRECTION('',(0.,-0.,1.));
+#2840 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2841 = ORIENTED_EDGE('',*,*,#2819,.T.);
+#2842 = ORIENTED_EDGE('',*,*,#826,.F.);
+#2843 = ORIENTED_EDGE('',*,*,#2844,.F.);
+#2844 = EDGE_CURVE('',#2834,#819,#2845,.T.);
+#2845 = LINE('',#2846,#2847);
+#2846 = CARTESIAN_POINT('',(2.225,0.125,0.));
+#2847 = VECTOR('',#2848,1.);
+#2848 = DIRECTION('',(0.,0.,1.));
+#2849 = CYLINDRICAL_SURFACE('',#2850,0.125);
+#2850 = AXIS2_PLACEMENT_3D('',#2851,#2852,#2853);
+#2851 = CARTESIAN_POINT('',(2.225,0.25,0.));
+#2852 = DIRECTION('',(0.,-0.,-1.));
+#2853 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2854 = ADVANCED_FACE('',(#2855),#2882,.F.);
+#2855 = FACE_BOUND('',#2856,.F.);
+#2856 = EDGE_LOOP('',(#2857,#2865,#2866,#2867,#2868,#2876));
+#2857 = ORIENTED_EDGE('',*,*,#2858,.F.);
+#2858 = EDGE_CURVE('',#2834,#2859,#2861,.T.);
+#2859 = VERTEX_POINT('',#2860);
+#2860 = CARTESIAN_POINT('',(2.5,0.125,0.));
+#2861 = LINE('',#2862,#2863);
+#2862 = CARTESIAN_POINT('',(2.225,0.125,0.));
+#2863 = VECTOR('',#2864,1.);
+#2864 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2865 = ORIENTED_EDGE('',*,*,#2844,.T.);
+#2866 = ORIENTED_EDGE('',*,*,#818,.F.);
+#2867 = ORIENTED_EDGE('',*,*,#2400,.T.);
+#2868 = ORIENTED_EDGE('',*,*,#2869,.T.);
+#2869 = EDGE_CURVE('',#2401,#2870,#2872,.T.);
+#2870 = VERTEX_POINT('',#2871);
+#2871 = CARTESIAN_POINT('',(2.5,0.125,0.2));
+#2872 = LINE('',#2873,#2874);
+#2873 = CARTESIAN_POINT('',(2.225,0.125,0.2));
+#2874 = VECTOR('',#2875,1.);
+#2875 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2876 = ORIENTED_EDGE('',*,*,#2877,.F.);
+#2877 = EDGE_CURVE('',#2859,#2870,#2878,.T.);
+#2878 = LINE('',#2879,#2880);
+#2879 = CARTESIAN_POINT('',(2.5,0.125,0.));
+#2880 = VECTOR('',#2881,1.);
+#2881 = DIRECTION('',(0.,0.,1.));
+#2882 = PLANE('',#2883);
+#2883 = AXIS2_PLACEMENT_3D('',#2884,#2885,#2886);
+#2884 = CARTESIAN_POINT('',(2.225,0.125,0.));
+#2885 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2886 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2887 = ADVANCED_FACE('',(#2888),#2922,.F.);
+#2888 = FACE_BOUND('',#2889,.F.);
+#2889 = EDGE_LOOP('',(#2890,#2900,#2908,#2914,#2915,#2916));
+#2890 = ORIENTED_EDGE('',*,*,#2891,.F.);
+#2891 = EDGE_CURVE('',#2892,#2894,#2896,.T.);
+#2892 = VERTEX_POINT('',#2893);
+#2893 = CARTESIAN_POINT('',(2.5,-0.125,0.));
+#2894 = VERTEX_POINT('',#2895);
+#2895 = CARTESIAN_POINT('',(2.225,-0.125,0.));
+#2896 = LINE('',#2897,#2898);
+#2897 = CARTESIAN_POINT('',(2.5,-0.125,0.));
+#2898 = VECTOR('',#2899,1.);
+#2899 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2900 = ORIENTED_EDGE('',*,*,#2901,.T.);
+#2901 = EDGE_CURVE('',#2892,#2902,#2904,.T.);
+#2902 = VERTEX_POINT('',#2903);
+#2903 = CARTESIAN_POINT('',(2.5,-0.125,0.2));
+#2904 = LINE('',#2905,#2906);
+#2905 = CARTESIAN_POINT('',(2.5,-0.125,0.));
+#2906 = VECTOR('',#2907,1.);
+#2907 = DIRECTION('',(0.,0.,1.));
+#2908 = ORIENTED_EDGE('',*,*,#2909,.T.);
+#2909 = EDGE_CURVE('',#2902,#2386,#2910,.T.);
+#2910 = LINE('',#2911,#2912);
+#2911 = CARTESIAN_POINT('',(2.5,-0.125,0.2));
+#2912 = VECTOR('',#2913,1.);
+#2913 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2914 = ORIENTED_EDGE('',*,*,#2393,.T.);
+#2915 = ORIENTED_EDGE('',*,*,#802,.F.);
+#2916 = ORIENTED_EDGE('',*,*,#2917,.F.);
+#2917 = EDGE_CURVE('',#2894,#794,#2918,.T.);
+#2918 = LINE('',#2919,#2920);
+#2919 = CARTESIAN_POINT('',(2.225,-0.125,0.));
+#2920 = VECTOR('',#2921,1.);
+#2921 = DIRECTION('',(0.,0.,1.));
+#2922 = PLANE('',#2923);
+#2923 = AXIS2_PLACEMENT_3D('',#2924,#2925,#2926);
+#2924 = CARTESIAN_POINT('',(2.5,-0.125,0.));
+#2925 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#2926 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2927 = ADVANCED_FACE('',(#2928),#2947,.T.);
+#2928 = FACE_BOUND('',#2929,.F.);
+#2929 = EDGE_LOOP('',(#2930,#2939,#2940,#2941));
+#2930 = ORIENTED_EDGE('',*,*,#2931,.F.);
+#2931 = EDGE_CURVE('',#2894,#2932,#2934,.T.);
+#2932 = VERTEX_POINT('',#2933);
+#2933 = CARTESIAN_POINT('',(2.225,-0.375,0.));
+#2934 = CIRCLE('',#2935,0.125);
+#2935 = AXIS2_PLACEMENT_3D('',#2936,#2937,#2938);
+#2936 = CARTESIAN_POINT('',(2.225,-0.25,0.));
+#2937 = DIRECTION('',(0.,-0.,1.));
+#2938 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2939 = ORIENTED_EDGE('',*,*,#2917,.T.);
+#2940 = ORIENTED_EDGE('',*,*,#793,.F.);
+#2941 = ORIENTED_EDGE('',*,*,#2942,.F.);
+#2942 = EDGE_CURVE('',#2932,#786,#2943,.T.);
+#2943 = LINE('',#2944,#2945);
+#2944 = CARTESIAN_POINT('',(2.225,-0.375,0.));
+#2945 = VECTOR('',#2946,1.);
+#2946 = DIRECTION('',(0.,0.,1.));
+#2947 = CYLINDRICAL_SURFACE('',#2948,0.125);
+#2948 = AXIS2_PLACEMENT_3D('',#2949,#2950,#2951);
+#2949 = CARTESIAN_POINT('',(2.225,-0.25,0.));
+#2950 = DIRECTION('',(0.,-0.,-1.));
+#2951 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2952 = ADVANCED_FACE('',(#2953),#2980,.F.);
+#2953 = FACE_BOUND('',#2954,.F.);
+#2954 = EDGE_LOOP('',(#2955,#2963,#2964,#2965,#2966,#2974));
+#2955 = ORIENTED_EDGE('',*,*,#2956,.F.);
+#2956 = EDGE_CURVE('',#2932,#2957,#2959,.T.);
+#2957 = VERTEX_POINT('',#2958);
+#2958 = CARTESIAN_POINT('',(2.5,-0.375,0.));
+#2959 = LINE('',#2960,#2961);
+#2960 = CARTESIAN_POINT('',(2.225,-0.375,0.));
+#2961 = VECTOR('',#2962,1.);
+#2962 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2963 = ORIENTED_EDGE('',*,*,#2942,.T.);
+#2964 = ORIENTED_EDGE('',*,*,#785,.F.);
+#2965 = ORIENTED_EDGE('',*,*,#2377,.T.);
+#2966 = ORIENTED_EDGE('',*,*,#2967,.T.);
+#2967 = EDGE_CURVE('',#2378,#2968,#2970,.T.);
+#2968 = VERTEX_POINT('',#2969);
+#2969 = CARTESIAN_POINT('',(2.5,-0.375,0.2));
+#2970 = LINE('',#2971,#2972);
+#2971 = CARTESIAN_POINT('',(2.225,-0.375,0.2));
+#2972 = VECTOR('',#2973,1.);
+#2973 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2974 = ORIENTED_EDGE('',*,*,#2975,.F.);
+#2975 = EDGE_CURVE('',#2957,#2968,#2976,.T.);
+#2976 = LINE('',#2977,#2978);
+#2977 = CARTESIAN_POINT('',(2.5,-0.375,0.));
+#2978 = VECTOR('',#2979,1.);
+#2979 = DIRECTION('',(0.,0.,1.));
+#2980 = PLANE('',#2981);
+#2981 = AXIS2_PLACEMENT_3D('',#2982,#2983,#2984);
+#2982 = CARTESIAN_POINT('',(2.225,-0.375,0.));
+#2983 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#2984 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#2985 = ADVANCED_FACE('',(#2986),#3020,.F.);
+#2986 = FACE_BOUND('',#2987,.F.);
+#2987 = EDGE_LOOP('',(#2988,#2998,#3006,#3012,#3013,#3014));
+#2988 = ORIENTED_EDGE('',*,*,#2989,.F.);
+#2989 = EDGE_CURVE('',#2990,#2992,#2994,.T.);
+#2990 = VERTEX_POINT('',#2991);
+#2991 = CARTESIAN_POINT('',(2.5,-0.625,0.));
+#2992 = VERTEX_POINT('',#2993);
+#2993 = CARTESIAN_POINT('',(2.225,-0.625,0.));
+#2994 = LINE('',#2995,#2996);
+#2995 = CARTESIAN_POINT('',(2.5,-0.625,0.));
+#2996 = VECTOR('',#2997,1.);
+#2997 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#2998 = ORIENTED_EDGE('',*,*,#2999,.T.);
+#2999 = EDGE_CURVE('',#2990,#3000,#3002,.T.);
+#3000 = VERTEX_POINT('',#3001);
+#3001 = CARTESIAN_POINT('',(2.5,-0.625,0.2));
+#3002 = LINE('',#3003,#3004);
+#3003 = CARTESIAN_POINT('',(2.5,-0.625,0.));
+#3004 = VECTOR('',#3005,1.);
+#3005 = DIRECTION('',(0.,0.,1.));
+#3006 = ORIENTED_EDGE('',*,*,#3007,.T.);
+#3007 = EDGE_CURVE('',#3000,#2363,#3008,.T.);
+#3008 = LINE('',#3009,#3010);
+#3009 = CARTESIAN_POINT('',(2.5,-0.625,0.2));
+#3010 = VECTOR('',#3011,1.);
+#3011 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3012 = ORIENTED_EDGE('',*,*,#2370,.T.);
+#3013 = ORIENTED_EDGE('',*,*,#769,.F.);
+#3014 = ORIENTED_EDGE('',*,*,#3015,.F.);
+#3015 = EDGE_CURVE('',#2992,#761,#3016,.T.);
+#3016 = LINE('',#3017,#3018);
+#3017 = CARTESIAN_POINT('',(2.225,-0.625,0.));
+#3018 = VECTOR('',#3019,1.);
+#3019 = DIRECTION('',(0.,0.,1.));
+#3020 = PLANE('',#3021);
+#3021 = AXIS2_PLACEMENT_3D('',#3022,#3023,#3024);
+#3022 = CARTESIAN_POINT('',(2.5,-0.625,0.));
+#3023 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#3024 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3025 = ADVANCED_FACE('',(#3026),#3045,.T.);
+#3026 = FACE_BOUND('',#3027,.F.);
+#3027 = EDGE_LOOP('',(#3028,#3037,#3038,#3039));
+#3028 = ORIENTED_EDGE('',*,*,#3029,.F.);
+#3029 = EDGE_CURVE('',#2992,#3030,#3032,.T.);
+#3030 = VERTEX_POINT('',#3031);
+#3031 = CARTESIAN_POINT('',(2.225,-0.875,0.));
+#3032 = CIRCLE('',#3033,0.125);
+#3033 = AXIS2_PLACEMENT_3D('',#3034,#3035,#3036);
+#3034 = CARTESIAN_POINT('',(2.225,-0.75,0.));
+#3035 = DIRECTION('',(0.,-0.,1.));
+#3036 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3037 = ORIENTED_EDGE('',*,*,#3015,.T.);
+#3038 = ORIENTED_EDGE('',*,*,#760,.F.);
+#3039 = ORIENTED_EDGE('',*,*,#3040,.F.);
+#3040 = EDGE_CURVE('',#3030,#753,#3041,.T.);
+#3041 = LINE('',#3042,#3043);
+#3042 = CARTESIAN_POINT('',(2.225,-0.875,0.));
+#3043 = VECTOR('',#3044,1.);
+#3044 = DIRECTION('',(0.,0.,1.));
+#3045 = CYLINDRICAL_SURFACE('',#3046,0.125);
+#3046 = AXIS2_PLACEMENT_3D('',#3047,#3048,#3049);
+#3047 = CARTESIAN_POINT('',(2.225,-0.75,0.));
+#3048 = DIRECTION('',(0.,-0.,-1.));
+#3049 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3050 = ADVANCED_FACE('',(#3051),#3078,.F.);
+#3051 = FACE_BOUND('',#3052,.F.);
+#3052 = EDGE_LOOP('',(#3053,#3061,#3062,#3063,#3064,#3072));
+#3053 = ORIENTED_EDGE('',*,*,#3054,.F.);
+#3054 = EDGE_CURVE('',#3030,#3055,#3057,.T.);
+#3055 = VERTEX_POINT('',#3056);
+#3056 = CARTESIAN_POINT('',(2.5,-0.875,0.));
+#3057 = LINE('',#3058,#3059);
+#3058 = CARTESIAN_POINT('',(2.225,-0.875,0.));
+#3059 = VECTOR('',#3060,1.);
+#3060 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3061 = ORIENTED_EDGE('',*,*,#3040,.T.);
+#3062 = ORIENTED_EDGE('',*,*,#752,.F.);
+#3063 = ORIENTED_EDGE('',*,*,#2354,.T.);
+#3064 = ORIENTED_EDGE('',*,*,#3065,.T.);
+#3065 = EDGE_CURVE('',#2355,#3066,#3068,.T.);
+#3066 = VERTEX_POINT('',#3067);
+#3067 = CARTESIAN_POINT('',(2.5,-0.875,0.2));
+#3068 = LINE('',#3069,#3070);
+#3069 = CARTESIAN_POINT('',(2.225,-0.875,0.2));
+#3070 = VECTOR('',#3071,1.);
+#3071 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3072 = ORIENTED_EDGE('',*,*,#3073,.F.);
+#3073 = EDGE_CURVE('',#3055,#3066,#3074,.T.);
+#3074 = LINE('',#3075,#3076);
+#3075 = CARTESIAN_POINT('',(2.5,-0.875,0.));
+#3076 = VECTOR('',#3077,1.);
+#3077 = DIRECTION('',(0.,0.,1.));
+#3078 = PLANE('',#3079);
+#3079 = AXIS2_PLACEMENT_3D('',#3080,#3081,#3082);
+#3080 = CARTESIAN_POINT('',(2.225,-0.875,0.));
+#3081 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3082 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3083 = ADVANCED_FACE('',(#3084),#3118,.F.);
+#3084 = FACE_BOUND('',#3085,.F.);
+#3085 = EDGE_LOOP('',(#3086,#3096,#3104,#3110,#3111,#3112));
+#3086 = ORIENTED_EDGE('',*,*,#3087,.F.);
+#3087 = EDGE_CURVE('',#3088,#3090,#3092,.T.);
+#3088 = VERTEX_POINT('',#3089);
+#3089 = CARTESIAN_POINT('',(2.5,-1.125,0.));
+#3090 = VERTEX_POINT('',#3091);
+#3091 = CARTESIAN_POINT('',(2.225,-1.125,0.));
+#3092 = LINE('',#3093,#3094);
+#3093 = CARTESIAN_POINT('',(2.5,-1.125,0.));
+#3094 = VECTOR('',#3095,1.);
+#3095 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3096 = ORIENTED_EDGE('',*,*,#3097,.T.);
+#3097 = EDGE_CURVE('',#3088,#3098,#3100,.T.);
+#3098 = VERTEX_POINT('',#3099);
+#3099 = CARTESIAN_POINT('',(2.5,-1.125,0.2));
+#3100 = LINE('',#3101,#3102);
+#3101 = CARTESIAN_POINT('',(2.5,-1.125,0.));
+#3102 = VECTOR('',#3103,1.);
+#3103 = DIRECTION('',(0.,0.,1.));
+#3104 = ORIENTED_EDGE('',*,*,#3105,.T.);
+#3105 = EDGE_CURVE('',#3098,#2340,#3106,.T.);
+#3106 = LINE('',#3107,#3108);
+#3107 = CARTESIAN_POINT('',(2.5,-1.125,0.2));
+#3108 = VECTOR('',#3109,1.);
+#3109 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3110 = ORIENTED_EDGE('',*,*,#2347,.T.);
+#3111 = ORIENTED_EDGE('',*,*,#736,.F.);
+#3112 = ORIENTED_EDGE('',*,*,#3113,.F.);
+#3113 = EDGE_CURVE('',#3090,#728,#3114,.T.);
+#3114 = LINE('',#3115,#3116);
+#3115 = CARTESIAN_POINT('',(2.225,-1.125,0.));
+#3116 = VECTOR('',#3117,1.);
+#3117 = DIRECTION('',(0.,0.,1.));
+#3118 = PLANE('',#3119);
+#3119 = AXIS2_PLACEMENT_3D('',#3120,#3121,#3122);
+#3120 = CARTESIAN_POINT('',(2.5,-1.125,0.));
+#3121 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#3122 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3123 = ADVANCED_FACE('',(#3124),#3143,.T.);
+#3124 = FACE_BOUND('',#3125,.F.);
+#3125 = EDGE_LOOP('',(#3126,#3135,#3136,#3137));
+#3126 = ORIENTED_EDGE('',*,*,#3127,.F.);
+#3127 = EDGE_CURVE('',#3090,#3128,#3130,.T.);
+#3128 = VERTEX_POINT('',#3129);
+#3129 = CARTESIAN_POINT('',(2.225,-1.375,0.));
+#3130 = CIRCLE('',#3131,0.125);
+#3131 = AXIS2_PLACEMENT_3D('',#3132,#3133,#3134);
+#3132 = CARTESIAN_POINT('',(2.225,-1.25,0.));
+#3133 = DIRECTION('',(0.,-0.,1.));
+#3134 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3135 = ORIENTED_EDGE('',*,*,#3113,.T.);
+#3136 = ORIENTED_EDGE('',*,*,#727,.F.);
+#3137 = ORIENTED_EDGE('',*,*,#3138,.F.);
+#3138 = EDGE_CURVE('',#3128,#720,#3139,.T.);
+#3139 = LINE('',#3140,#3141);
+#3140 = CARTESIAN_POINT('',(2.225,-1.375,0.));
+#3141 = VECTOR('',#3142,1.);
+#3142 = DIRECTION('',(0.,0.,1.));
+#3143 = CYLINDRICAL_SURFACE('',#3144,0.125);
+#3144 = AXIS2_PLACEMENT_3D('',#3145,#3146,#3147);
+#3145 = CARTESIAN_POINT('',(2.225,-1.25,0.));
+#3146 = DIRECTION('',(0.,-0.,-1.));
+#3147 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3148 = ADVANCED_FACE('',(#3149),#3176,.F.);
+#3149 = FACE_BOUND('',#3150,.F.);
+#3150 = EDGE_LOOP('',(#3151,#3159,#3160,#3161,#3162,#3170));
+#3151 = ORIENTED_EDGE('',*,*,#3152,.F.);
+#3152 = EDGE_CURVE('',#3128,#3153,#3155,.T.);
+#3153 = VERTEX_POINT('',#3154);
+#3154 = CARTESIAN_POINT('',(2.5,-1.375,0.));
+#3155 = LINE('',#3156,#3157);
+#3156 = CARTESIAN_POINT('',(2.225,-1.375,0.));
+#3157 = VECTOR('',#3158,1.);
+#3158 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3159 = ORIENTED_EDGE('',*,*,#3138,.T.);
+#3160 = ORIENTED_EDGE('',*,*,#719,.F.);
+#3161 = ORIENTED_EDGE('',*,*,#2331,.T.);
+#3162 = ORIENTED_EDGE('',*,*,#3163,.T.);
+#3163 = EDGE_CURVE('',#2332,#3164,#3166,.T.);
+#3164 = VERTEX_POINT('',#3165);
+#3165 = CARTESIAN_POINT('',(2.5,-1.375,0.2));
+#3166 = LINE('',#3167,#3168);
+#3167 = CARTESIAN_POINT('',(2.225,-1.375,0.2));
+#3168 = VECTOR('',#3169,1.);
+#3169 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3170 = ORIENTED_EDGE('',*,*,#3171,.F.);
+#3171 = EDGE_CURVE('',#3153,#3164,#3172,.T.);
+#3172 = LINE('',#3173,#3174);
+#3173 = CARTESIAN_POINT('',(2.5,-1.375,0.));
+#3174 = VECTOR('',#3175,1.);
+#3175 = DIRECTION('',(0.,0.,1.));
+#3176 = PLANE('',#3177);
+#3177 = AXIS2_PLACEMENT_3D('',#3178,#3179,#3180);
+#3178 = CARTESIAN_POINT('',(2.225,-1.375,0.));
+#3179 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3180 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3181 = ADVANCED_FACE('',(#3182),#3216,.F.);
+#3182 = FACE_BOUND('',#3183,.F.);
+#3183 = EDGE_LOOP('',(#3184,#3194,#3202,#3208,#3209,#3210));
+#3184 = ORIENTED_EDGE('',*,*,#3185,.F.);
+#3185 = EDGE_CURVE('',#3186,#3188,#3190,.T.);
+#3186 = VERTEX_POINT('',#3187);
+#3187 = CARTESIAN_POINT('',(2.5,-1.625,0.));
+#3188 = VERTEX_POINT('',#3189);
+#3189 = CARTESIAN_POINT('',(2.225,-1.625,0.));
+#3190 = LINE('',#3191,#3192);
+#3191 = CARTESIAN_POINT('',(2.5,-1.625,0.));
+#3192 = VECTOR('',#3193,1.);
+#3193 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3194 = ORIENTED_EDGE('',*,*,#3195,.T.);
+#3195 = EDGE_CURVE('',#3186,#3196,#3198,.T.);
+#3196 = VERTEX_POINT('',#3197);
+#3197 = CARTESIAN_POINT('',(2.5,-1.625,0.2));
+#3198 = LINE('',#3199,#3200);
+#3199 = CARTESIAN_POINT('',(2.5,-1.625,0.));
+#3200 = VECTOR('',#3201,1.);
+#3201 = DIRECTION('',(0.,0.,1.));
+#3202 = ORIENTED_EDGE('',*,*,#3203,.T.);
+#3203 = EDGE_CURVE('',#3196,#2317,#3204,.T.);
+#3204 = LINE('',#3205,#3206);
+#3205 = CARTESIAN_POINT('',(2.5,-1.625,0.2));
+#3206 = VECTOR('',#3207,1.);
+#3207 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3208 = ORIENTED_EDGE('',*,*,#2324,.T.);
+#3209 = ORIENTED_EDGE('',*,*,#703,.F.);
+#3210 = ORIENTED_EDGE('',*,*,#3211,.F.);
+#3211 = EDGE_CURVE('',#3188,#695,#3212,.T.);
+#3212 = LINE('',#3213,#3214);
+#3213 = CARTESIAN_POINT('',(2.225,-1.625,0.));
+#3214 = VECTOR('',#3215,1.);
+#3215 = DIRECTION('',(0.,0.,1.));
+#3216 = PLANE('',#3217);
+#3217 = AXIS2_PLACEMENT_3D('',#3218,#3219,#3220);
+#3218 = CARTESIAN_POINT('',(2.5,-1.625,0.));
+#3219 = DIRECTION('',(-3.445092848398E-16,-1.,0.));
+#3220 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#3221 = ADVANCED_FACE('',(#3222),#3241,.T.);
+#3222 = FACE_BOUND('',#3223,.F.);
+#3223 = EDGE_LOOP('',(#3224,#3233,#3234,#3235));
+#3224 = ORIENTED_EDGE('',*,*,#3225,.F.);
+#3225 = EDGE_CURVE('',#3188,#3226,#3228,.T.);
+#3226 = VERTEX_POINT('',#3227);
+#3227 = CARTESIAN_POINT('',(2.225,-1.875,0.));
+#3228 = CIRCLE('',#3229,0.125);
+#3229 = AXIS2_PLACEMENT_3D('',#3230,#3231,#3232);
+#3230 = CARTESIAN_POINT('',(2.225,-1.75,0.));
+#3231 = DIRECTION('',(0.,-0.,1.));
+#3232 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3233 = ORIENTED_EDGE('',*,*,#3211,.T.);
+#3234 = ORIENTED_EDGE('',*,*,#694,.F.);
+#3235 = ORIENTED_EDGE('',*,*,#3236,.F.);
+#3236 = EDGE_CURVE('',#3226,#687,#3237,.T.);
+#3237 = LINE('',#3238,#3239);
+#3238 = CARTESIAN_POINT('',(2.225,-1.875,0.));
+#3239 = VECTOR('',#3240,1.);
+#3240 = DIRECTION('',(0.,0.,1.));
+#3241 = CYLINDRICAL_SURFACE('',#3242,0.125);
+#3242 = AXIS2_PLACEMENT_3D('',#3243,#3244,#3245);
+#3243 = CARTESIAN_POINT('',(2.225,-1.75,0.));
+#3244 = DIRECTION('',(0.,-0.,-1.));
+#3245 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3246 = ADVANCED_FACE('',(#3247),#3274,.F.);
+#3247 = FACE_BOUND('',#3248,.F.);
+#3248 = EDGE_LOOP('',(#3249,#3257,#3258,#3259,#3260,#3268));
+#3249 = ORIENTED_EDGE('',*,*,#3250,.F.);
+#3250 = EDGE_CURVE('',#3226,#3251,#3253,.T.);
+#3251 = VERTEX_POINT('',#3252);
+#3252 = CARTESIAN_POINT('',(2.5,-1.875,0.));
+#3253 = LINE('',#3254,#3255);
+#3254 = CARTESIAN_POINT('',(2.225,-1.875,0.));
+#3255 = VECTOR('',#3256,1.);
+#3256 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3257 = ORIENTED_EDGE('',*,*,#3236,.T.);
+#3258 = ORIENTED_EDGE('',*,*,#686,.F.);
+#3259 = ORIENTED_EDGE('',*,*,#2308,.T.);
+#3260 = ORIENTED_EDGE('',*,*,#3261,.T.);
+#3261 = EDGE_CURVE('',#2309,#3262,#3264,.T.);
+#3262 = VERTEX_POINT('',#3263);
+#3263 = CARTESIAN_POINT('',(2.5,-1.875,0.2));
+#3264 = LINE('',#3265,#3266);
+#3265 = CARTESIAN_POINT('',(2.225,-1.875,0.2));
+#3266 = VECTOR('',#3267,1.);
+#3267 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3268 = ORIENTED_EDGE('',*,*,#3269,.F.);
+#3269 = EDGE_CURVE('',#3251,#3262,#3270,.T.);
+#3270 = LINE('',#3271,#3272);
+#3271 = CARTESIAN_POINT('',(2.5,-1.875,0.));
+#3272 = VECTOR('',#3273,1.);
+#3273 = DIRECTION('',(0.,0.,1.));
+#3274 = PLANE('',#3275);
+#3275 = AXIS2_PLACEMENT_3D('',#3276,#3277,#3278);
+#3276 = CARTESIAN_POINT('',(2.225,-1.875,0.));
+#3277 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#3278 = DIRECTION('',(1.,-3.445092848398E-16,0.));
+#3279 = ADVANCED_FACE('',(#3280),#3482,.T.);
+#3280 = FACE_BOUND('',#3281,.T.);
+#3281 = EDGE_LOOP('',(#3282,#3290,#3296,#3297,#3305,#3313,#3319,#3320,
+#3328,#3336,#3342,#3343,#3351,#3359,#3365,#3366,#3374,#3382,#3388,
+#3389,#3397,#3405,#3411,#3412,#3420,#3428,#3434,#3435,#3443,#3451,
+#3457,#3458,#3466,#3474,#3480,#3481));
+#3282 = ORIENTED_EDGE('',*,*,#3283,.F.);
+#3283 = EDGE_CURVE('',#3284,#2294,#3286,.T.);
+#3284 = VERTEX_POINT('',#3285);
+#3285 = CARTESIAN_POINT('',(-2.4875,-2.4875,0.875));
+#3286 = LINE('',#3287,#3288);
+#3287 = CARTESIAN_POINT('',(-2.4875,-2.4875,0.875));
+#3288 = VECTOR('',#3289,1.);
+#3289 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#3290 = ORIENTED_EDGE('',*,*,#3291,.F.);
+#3291 = EDGE_CURVE('',#399,#3284,#3292,.T.);
+#3292 = LINE('',#3293,#3294);
+#3293 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#3294 = VECTOR('',#3295,1.);
+#3295 = DIRECTION('',(0.,0.,1.));
+#3296 = ORIENTED_EDGE('',*,*,#406,.T.);
+#3297 = ORIENTED_EDGE('',*,*,#3298,.T.);
+#3298 = EDGE_CURVE('',#407,#3299,#3301,.T.);
+#3299 = VERTEX_POINT('',#3300);
+#3300 = CARTESIAN_POINT('',(-1.875,-2.4875,0.2));
+#3301 = LINE('',#3302,#3303);
+#3302 = CARTESIAN_POINT('',(-1.875,-2.4875,1.25E-02));
+#3303 = VECTOR('',#3304,1.);
+#3304 = DIRECTION('',(0.,0.,1.));
+#3305 = ORIENTED_EDGE('',*,*,#3306,.F.);
+#3306 = EDGE_CURVE('',#3307,#3299,#3309,.T.);
+#3307 = VERTEX_POINT('',#3308);
+#3308 = CARTESIAN_POINT('',(-1.625,-2.4875,0.2));
+#3309 = LINE('',#3310,#3311);
+#3310 = CARTESIAN_POINT('',(-2.11875,-2.4875,0.2));
+#3311 = VECTOR('',#3312,1.);
+#3312 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3313 = ORIENTED_EDGE('',*,*,#3314,.T.);
+#3314 = EDGE_CURVE('',#3307,#432,#3315,.T.);
+#3315 = LINE('',#3316,#3317);
+#3316 = CARTESIAN_POINT('',(-1.625,-2.4875,1.25E-02));
+#3317 = VECTOR('',#3318,1.);
+#3318 = DIRECTION('',(-0.,0.,-1.));
+#3319 = ORIENTED_EDGE('',*,*,#439,.T.);
+#3320 = ORIENTED_EDGE('',*,*,#3321,.T.);
+#3321 = EDGE_CURVE('',#440,#3322,#3324,.T.);
+#3322 = VERTEX_POINT('',#3323);
+#3323 = CARTESIAN_POINT('',(-1.375,-2.4875,0.2));
+#3324 = LINE('',#3325,#3326);
+#3325 = CARTESIAN_POINT('',(-1.375,-2.4875,1.25E-02));
+#3326 = VECTOR('',#3327,1.);
+#3327 = DIRECTION('',(0.,0.,1.));
+#3328 = ORIENTED_EDGE('',*,*,#3329,.F.);
+#3329 = EDGE_CURVE('',#3330,#3322,#3332,.T.);
+#3330 = VERTEX_POINT('',#3331);
+#3331 = CARTESIAN_POINT('',(-1.125,-2.4875,0.2));
+#3332 = LINE('',#3333,#3334);
+#3333 = CARTESIAN_POINT('',(-1.86875,-2.4875,0.2));
+#3334 = VECTOR('',#3335,1.);
+#3335 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3336 = ORIENTED_EDGE('',*,*,#3337,.T.);
+#3337 = EDGE_CURVE('',#3330,#465,#3338,.T.);
+#3338 = LINE('',#3339,#3340);
+#3339 = CARTESIAN_POINT('',(-1.125,-2.4875,1.25E-02));
+#3340 = VECTOR('',#3341,1.);
+#3341 = DIRECTION('',(-0.,0.,-1.));
+#3342 = ORIENTED_EDGE('',*,*,#472,.T.);
+#3343 = ORIENTED_EDGE('',*,*,#3344,.T.);
+#3344 = EDGE_CURVE('',#473,#3345,#3347,.T.);
+#3345 = VERTEX_POINT('',#3346);
+#3346 = CARTESIAN_POINT('',(-0.875,-2.4875,0.2));
+#3347 = LINE('',#3348,#3349);
+#3348 = CARTESIAN_POINT('',(-0.875,-2.4875,1.25E-02));
+#3349 = VECTOR('',#3350,1.);
+#3350 = DIRECTION('',(0.,0.,1.));
+#3351 = ORIENTED_EDGE('',*,*,#3352,.F.);
+#3352 = EDGE_CURVE('',#3353,#3345,#3355,.T.);
+#3353 = VERTEX_POINT('',#3354);
+#3354 = CARTESIAN_POINT('',(-0.625,-2.4875,0.2));
+#3355 = LINE('',#3356,#3357);
+#3356 = CARTESIAN_POINT('',(-1.61875,-2.4875,0.2));
+#3357 = VECTOR('',#3358,1.);
+#3358 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3359 = ORIENTED_EDGE('',*,*,#3360,.T.);
+#3360 = EDGE_CURVE('',#3353,#498,#3361,.T.);
+#3361 = LINE('',#3362,#3363);
+#3362 = CARTESIAN_POINT('',(-0.625,-2.4875,1.25E-02));
+#3363 = VECTOR('',#3364,1.);
+#3364 = DIRECTION('',(-0.,0.,-1.));
+#3365 = ORIENTED_EDGE('',*,*,#505,.T.);
+#3366 = ORIENTED_EDGE('',*,*,#3367,.T.);
+#3367 = EDGE_CURVE('',#506,#3368,#3370,.T.);
+#3368 = VERTEX_POINT('',#3369);
+#3369 = CARTESIAN_POINT('',(-0.375,-2.4875,0.2));
+#3370 = LINE('',#3371,#3372);
+#3371 = CARTESIAN_POINT('',(-0.375,-2.4875,1.25E-02));
+#3372 = VECTOR('',#3373,1.);
+#3373 = DIRECTION('',(0.,0.,1.));
+#3374 = ORIENTED_EDGE('',*,*,#3375,.F.);
+#3375 = EDGE_CURVE('',#3376,#3368,#3378,.T.);
+#3376 = VERTEX_POINT('',#3377);
+#3377 = CARTESIAN_POINT('',(-0.125,-2.4875,0.2));
+#3378 = LINE('',#3379,#3380);
+#3379 = CARTESIAN_POINT('',(-1.36875,-2.4875,0.2));
+#3380 = VECTOR('',#3381,1.);
+#3381 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3382 = ORIENTED_EDGE('',*,*,#3383,.T.);
+#3383 = EDGE_CURVE('',#3376,#531,#3384,.T.);
+#3384 = LINE('',#3385,#3386);
+#3385 = CARTESIAN_POINT('',(-0.125,-2.4875,1.25E-02));
+#3386 = VECTOR('',#3387,1.);
+#3387 = DIRECTION('',(-0.,0.,-1.));
+#3388 = ORIENTED_EDGE('',*,*,#538,.T.);
+#3389 = ORIENTED_EDGE('',*,*,#3390,.T.);
+#3390 = EDGE_CURVE('',#539,#3391,#3393,.T.);
+#3391 = VERTEX_POINT('',#3392);
+#3392 = CARTESIAN_POINT('',(0.125,-2.4875,0.2));
+#3393 = LINE('',#3394,#3395);
+#3394 = CARTESIAN_POINT('',(0.125,-2.4875,1.25E-02));
+#3395 = VECTOR('',#3396,1.);
+#3396 = DIRECTION('',(0.,0.,1.));
+#3397 = ORIENTED_EDGE('',*,*,#3398,.F.);
+#3398 = EDGE_CURVE('',#3399,#3391,#3401,.T.);
+#3399 = VERTEX_POINT('',#3400);
+#3400 = CARTESIAN_POINT('',(0.375,-2.4875,0.2));
+#3401 = LINE('',#3402,#3403);
+#3402 = CARTESIAN_POINT('',(-1.11875,-2.4875,0.2));
+#3403 = VECTOR('',#3404,1.);
+#3404 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3405 = ORIENTED_EDGE('',*,*,#3406,.T.);
+#3406 = EDGE_CURVE('',#3399,#564,#3407,.T.);
+#3407 = LINE('',#3408,#3409);
+#3408 = CARTESIAN_POINT('',(0.375,-2.4875,1.25E-02));
+#3409 = VECTOR('',#3410,1.);
+#3410 = DIRECTION('',(-0.,0.,-1.));
+#3411 = ORIENTED_EDGE('',*,*,#571,.T.);
+#3412 = ORIENTED_EDGE('',*,*,#3413,.T.);
+#3413 = EDGE_CURVE('',#572,#3414,#3416,.T.);
+#3414 = VERTEX_POINT('',#3415);
+#3415 = CARTESIAN_POINT('',(0.625,-2.4875,0.2));
+#3416 = LINE('',#3417,#3418);
+#3417 = CARTESIAN_POINT('',(0.625,-2.4875,1.25E-02));
+#3418 = VECTOR('',#3419,1.);
+#3419 = DIRECTION('',(0.,0.,1.));
+#3420 = ORIENTED_EDGE('',*,*,#3421,.F.);
+#3421 = EDGE_CURVE('',#3422,#3414,#3424,.T.);
+#3422 = VERTEX_POINT('',#3423);
+#3423 = CARTESIAN_POINT('',(0.875,-2.4875,0.2));
+#3424 = LINE('',#3425,#3426);
+#3425 = CARTESIAN_POINT('',(-0.86875,-2.4875,0.2));
+#3426 = VECTOR('',#3427,1.);
+#3427 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3428 = ORIENTED_EDGE('',*,*,#3429,.T.);
+#3429 = EDGE_CURVE('',#3422,#597,#3430,.T.);
+#3430 = LINE('',#3431,#3432);
+#3431 = CARTESIAN_POINT('',(0.875,-2.4875,1.25E-02));
+#3432 = VECTOR('',#3433,1.);
+#3433 = DIRECTION('',(-0.,0.,-1.));
+#3434 = ORIENTED_EDGE('',*,*,#604,.T.);
+#3435 = ORIENTED_EDGE('',*,*,#3436,.T.);
+#3436 = EDGE_CURVE('',#605,#3437,#3439,.T.);
+#3437 = VERTEX_POINT('',#3438);
+#3438 = CARTESIAN_POINT('',(1.125,-2.4875,0.2));
+#3439 = LINE('',#3440,#3441);
+#3440 = CARTESIAN_POINT('',(1.125,-2.4875,1.25E-02));
+#3441 = VECTOR('',#3442,1.);
+#3442 = DIRECTION('',(0.,0.,1.));
+#3443 = ORIENTED_EDGE('',*,*,#3444,.F.);
+#3444 = EDGE_CURVE('',#3445,#3437,#3447,.T.);
+#3445 = VERTEX_POINT('',#3446);
+#3446 = CARTESIAN_POINT('',(1.375,-2.4875,0.2));
+#3447 = LINE('',#3448,#3449);
+#3448 = CARTESIAN_POINT('',(-0.61875,-2.4875,0.2));
+#3449 = VECTOR('',#3450,1.);
+#3450 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3451 = ORIENTED_EDGE('',*,*,#3452,.T.);
+#3452 = EDGE_CURVE('',#3445,#630,#3453,.T.);
+#3453 = LINE('',#3454,#3455);
+#3454 = CARTESIAN_POINT('',(1.375,-2.4875,1.25E-02));
+#3455 = VECTOR('',#3456,1.);
+#3456 = DIRECTION('',(-0.,0.,-1.));
+#3457 = ORIENTED_EDGE('',*,*,#637,.T.);
+#3458 = ORIENTED_EDGE('',*,*,#3459,.T.);
+#3459 = EDGE_CURVE('',#638,#3460,#3462,.T.);
+#3460 = VERTEX_POINT('',#3461);
+#3461 = CARTESIAN_POINT('',(1.625,-2.4875,0.2));
+#3462 = LINE('',#3463,#3464);
+#3463 = CARTESIAN_POINT('',(1.625,-2.4875,1.25E-02));
+#3464 = VECTOR('',#3465,1.);
+#3465 = DIRECTION('',(0.,0.,1.));
+#3466 = ORIENTED_EDGE('',*,*,#3467,.F.);
+#3467 = EDGE_CURVE('',#3468,#3460,#3470,.T.);
+#3468 = VERTEX_POINT('',#3469);
+#3469 = CARTESIAN_POINT('',(1.875,-2.4875,0.2));
+#3470 = LINE('',#3471,#3472);
+#3471 = CARTESIAN_POINT('',(-0.36875,-2.4875,0.2));
+#3472 = VECTOR('',#3473,1.);
+#3473 = DIRECTION('',(-1.,2.22044604925E-16,0.));
+#3474 = ORIENTED_EDGE('',*,*,#3475,.T.);
+#3475 = EDGE_CURVE('',#3468,#663,#3476,.T.);
+#3476 = LINE('',#3477,#3478);
+#3477 = CARTESIAN_POINT('',(1.875,-2.4875,1.25E-02));
+#3478 = VECTOR('',#3479,1.);
+#3479 = DIRECTION('',(-0.,0.,-1.));
+#3480 = ORIENTED_EDGE('',*,*,#670,.T.);
+#3481 = ORIENTED_EDGE('',*,*,#2301,.T.);
+#3482 = PLANE('',#3483);
+#3483 = AXIS2_PLACEMENT_3D('',#3484,#3485,#3486);
+#3484 = CARTESIAN_POINT('',(-2.4875,-2.4875,2.5E-02));
+#3485 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#3486 = DIRECTION('',(0.,0.,1.));
+#3487 = ADVANCED_FACE('',(#3488),#3522,.F.);
+#3488 = FACE_BOUND('',#3489,.F.);
+#3489 = EDGE_LOOP('',(#3490,#3500,#3508,#3514,#3515,#3516));
+#3490 = ORIENTED_EDGE('',*,*,#3491,.F.);
+#3491 = EDGE_CURVE('',#3492,#3494,#3496,.T.);
+#3492 = VERTEX_POINT('',#3493);
+#3493 = CARTESIAN_POINT('',(1.875,-2.5,0.));
+#3494 = VERTEX_POINT('',#3495);
+#3495 = CARTESIAN_POINT('',(1.875,-2.225,0.));
+#3496 = LINE('',#3497,#3498);
+#3497 = CARTESIAN_POINT('',(1.875,-2.5,0.));
+#3498 = VECTOR('',#3499,1.);
+#3499 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3500 = ORIENTED_EDGE('',*,*,#3501,.T.);
+#3501 = EDGE_CURVE('',#3492,#3502,#3504,.T.);
+#3502 = VERTEX_POINT('',#3503);
+#3503 = CARTESIAN_POINT('',(1.875,-2.5,0.2));
+#3504 = LINE('',#3505,#3506);
+#3505 = CARTESIAN_POINT('',(1.875,-2.5,0.));
+#3506 = VECTOR('',#3507,1.);
+#3507 = DIRECTION('',(0.,0.,1.));
+#3508 = ORIENTED_EDGE('',*,*,#3509,.T.);
+#3509 = EDGE_CURVE('',#3502,#3468,#3510,.T.);
+#3510 = LINE('',#3511,#3512);
+#3511 = CARTESIAN_POINT('',(1.875,-2.5,0.2));
+#3512 = VECTOR('',#3513,1.);
+#3513 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3514 = ORIENTED_EDGE('',*,*,#3475,.T.);
+#3515 = ORIENTED_EDGE('',*,*,#662,.F.);
+#3516 = ORIENTED_EDGE('',*,*,#3517,.F.);
+#3517 = EDGE_CURVE('',#3494,#654,#3518,.T.);
+#3518 = LINE('',#3519,#3520);
+#3519 = CARTESIAN_POINT('',(1.875,-2.225,0.));
+#3520 = VECTOR('',#3521,1.);
+#3521 = DIRECTION('',(0.,0.,1.));
+#3522 = PLANE('',#3523);
+#3523 = AXIS2_PLACEMENT_3D('',#3524,#3525,#3526);
+#3524 = CARTESIAN_POINT('',(1.875,-2.5,0.));
+#3525 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#3526 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3527 = ADVANCED_FACE('',(#3528),#3547,.T.);
+#3528 = FACE_BOUND('',#3529,.F.);
+#3529 = EDGE_LOOP('',(#3530,#3539,#3540,#3541));
+#3530 = ORIENTED_EDGE('',*,*,#3531,.F.);
+#3531 = EDGE_CURVE('',#3494,#3532,#3534,.T.);
+#3532 = VERTEX_POINT('',#3533);
+#3533 = CARTESIAN_POINT('',(1.625,-2.225,0.));
+#3534 = CIRCLE('',#3535,0.125);
+#3535 = AXIS2_PLACEMENT_3D('',#3536,#3537,#3538);
+#3536 = CARTESIAN_POINT('',(1.75,-2.225,0.));
+#3537 = DIRECTION('',(-0.,0.,1.));
+#3538 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3539 = ORIENTED_EDGE('',*,*,#3517,.T.);
+#3540 = ORIENTED_EDGE('',*,*,#653,.F.);
+#3541 = ORIENTED_EDGE('',*,*,#3542,.F.);
+#3542 = EDGE_CURVE('',#3532,#646,#3543,.T.);
+#3543 = LINE('',#3544,#3545);
+#3544 = CARTESIAN_POINT('',(1.625,-2.225,0.));
+#3545 = VECTOR('',#3546,1.);
+#3546 = DIRECTION('',(0.,0.,1.));
+#3547 = CYLINDRICAL_SURFACE('',#3548,0.125);
+#3548 = AXIS2_PLACEMENT_3D('',#3549,#3550,#3551);
+#3549 = CARTESIAN_POINT('',(1.75,-2.225,0.));
+#3550 = DIRECTION('',(-0.,0.,-1.));
+#3551 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3552 = ADVANCED_FACE('',(#3553),#3580,.F.);
+#3553 = FACE_BOUND('',#3554,.F.);
+#3554 = EDGE_LOOP('',(#3555,#3563,#3564,#3565,#3566,#3574));
+#3555 = ORIENTED_EDGE('',*,*,#3556,.F.);
+#3556 = EDGE_CURVE('',#3532,#3557,#3559,.T.);
+#3557 = VERTEX_POINT('',#3558);
+#3558 = CARTESIAN_POINT('',(1.625,-2.5,0.));
+#3559 = LINE('',#3560,#3561);
+#3560 = CARTESIAN_POINT('',(1.625,-2.225,0.));
+#3561 = VECTOR('',#3562,1.);
+#3562 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3563 = ORIENTED_EDGE('',*,*,#3542,.T.);
+#3564 = ORIENTED_EDGE('',*,*,#645,.F.);
+#3565 = ORIENTED_EDGE('',*,*,#3459,.T.);
+#3566 = ORIENTED_EDGE('',*,*,#3567,.T.);
+#3567 = EDGE_CURVE('',#3460,#3568,#3570,.T.);
+#3568 = VERTEX_POINT('',#3569);
+#3569 = CARTESIAN_POINT('',(1.625,-2.5,0.2));
+#3570 = LINE('',#3571,#3572);
+#3571 = CARTESIAN_POINT('',(1.625,-2.225,0.2));
+#3572 = VECTOR('',#3573,1.);
+#3573 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3574 = ORIENTED_EDGE('',*,*,#3575,.F.);
+#3575 = EDGE_CURVE('',#3557,#3568,#3576,.T.);
+#3576 = LINE('',#3577,#3578);
+#3577 = CARTESIAN_POINT('',(1.625,-2.5,0.));
+#3578 = VECTOR('',#3579,1.);
+#3579 = DIRECTION('',(0.,0.,1.));
+#3580 = PLANE('',#3581);
+#3581 = AXIS2_PLACEMENT_3D('',#3582,#3583,#3584);
+#3582 = CARTESIAN_POINT('',(1.625,-2.225,0.));
+#3583 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3584 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3585 = ADVANCED_FACE('',(#3586),#3620,.F.);
+#3586 = FACE_BOUND('',#3587,.F.);
+#3587 = EDGE_LOOP('',(#3588,#3598,#3606,#3612,#3613,#3614));
+#3588 = ORIENTED_EDGE('',*,*,#3589,.F.);
+#3589 = EDGE_CURVE('',#3590,#3592,#3594,.T.);
+#3590 = VERTEX_POINT('',#3591);
+#3591 = CARTESIAN_POINT('',(1.375,-2.5,0.));
+#3592 = VERTEX_POINT('',#3593);
+#3593 = CARTESIAN_POINT('',(1.375,-2.225,0.));
+#3594 = LINE('',#3595,#3596);
+#3595 = CARTESIAN_POINT('',(1.375,-2.5,0.));
+#3596 = VECTOR('',#3597,1.);
+#3597 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3598 = ORIENTED_EDGE('',*,*,#3599,.T.);
+#3599 = EDGE_CURVE('',#3590,#3600,#3602,.T.);
+#3600 = VERTEX_POINT('',#3601);
+#3601 = CARTESIAN_POINT('',(1.375,-2.5,0.2));
+#3602 = LINE('',#3603,#3604);
+#3603 = CARTESIAN_POINT('',(1.375,-2.5,0.));
+#3604 = VECTOR('',#3605,1.);
+#3605 = DIRECTION('',(0.,0.,1.));
+#3606 = ORIENTED_EDGE('',*,*,#3607,.T.);
+#3607 = EDGE_CURVE('',#3600,#3445,#3608,.T.);
+#3608 = LINE('',#3609,#3610);
+#3609 = CARTESIAN_POINT('',(1.375,-2.5,0.2));
+#3610 = VECTOR('',#3611,1.);
+#3611 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3612 = ORIENTED_EDGE('',*,*,#3452,.T.);
+#3613 = ORIENTED_EDGE('',*,*,#629,.F.);
+#3614 = ORIENTED_EDGE('',*,*,#3615,.F.);
+#3615 = EDGE_CURVE('',#3592,#621,#3616,.T.);
+#3616 = LINE('',#3617,#3618);
+#3617 = CARTESIAN_POINT('',(1.375,-2.225,0.));
+#3618 = VECTOR('',#3619,1.);
+#3619 = DIRECTION('',(0.,0.,1.));
+#3620 = PLANE('',#3621);
+#3621 = AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);
+#3622 = CARTESIAN_POINT('',(1.375,-2.5,0.));
+#3623 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#3624 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3625 = ADVANCED_FACE('',(#3626),#3645,.T.);
+#3626 = FACE_BOUND('',#3627,.F.);
+#3627 = EDGE_LOOP('',(#3628,#3637,#3638,#3639));
+#3628 = ORIENTED_EDGE('',*,*,#3629,.F.);
+#3629 = EDGE_CURVE('',#3592,#3630,#3632,.T.);
+#3630 = VERTEX_POINT('',#3631);
+#3631 = CARTESIAN_POINT('',(1.125,-2.225,0.));
+#3632 = CIRCLE('',#3633,0.125);
+#3633 = AXIS2_PLACEMENT_3D('',#3634,#3635,#3636);
+#3634 = CARTESIAN_POINT('',(1.25,-2.225,0.));
+#3635 = DIRECTION('',(-0.,0.,1.));
+#3636 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3637 = ORIENTED_EDGE('',*,*,#3615,.T.);
+#3638 = ORIENTED_EDGE('',*,*,#620,.F.);
+#3639 = ORIENTED_EDGE('',*,*,#3640,.F.);
+#3640 = EDGE_CURVE('',#3630,#613,#3641,.T.);
+#3641 = LINE('',#3642,#3643);
+#3642 = CARTESIAN_POINT('',(1.125,-2.225,0.));
+#3643 = VECTOR('',#3644,1.);
+#3644 = DIRECTION('',(0.,0.,1.));
+#3645 = CYLINDRICAL_SURFACE('',#3646,0.125);
+#3646 = AXIS2_PLACEMENT_3D('',#3647,#3648,#3649);
+#3647 = CARTESIAN_POINT('',(1.25,-2.225,0.));
+#3648 = DIRECTION('',(-0.,0.,-1.));
+#3649 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3650 = ADVANCED_FACE('',(#3651),#3678,.F.);
+#3651 = FACE_BOUND('',#3652,.F.);
+#3652 = EDGE_LOOP('',(#3653,#3661,#3662,#3663,#3664,#3672));
+#3653 = ORIENTED_EDGE('',*,*,#3654,.F.);
+#3654 = EDGE_CURVE('',#3630,#3655,#3657,.T.);
+#3655 = VERTEX_POINT('',#3656);
+#3656 = CARTESIAN_POINT('',(1.125,-2.5,0.));
+#3657 = LINE('',#3658,#3659);
+#3658 = CARTESIAN_POINT('',(1.125,-2.225,0.));
+#3659 = VECTOR('',#3660,1.);
+#3660 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3661 = ORIENTED_EDGE('',*,*,#3640,.T.);
+#3662 = ORIENTED_EDGE('',*,*,#612,.F.);
+#3663 = ORIENTED_EDGE('',*,*,#3436,.T.);
+#3664 = ORIENTED_EDGE('',*,*,#3665,.T.);
+#3665 = EDGE_CURVE('',#3437,#3666,#3668,.T.);
+#3666 = VERTEX_POINT('',#3667);
+#3667 = CARTESIAN_POINT('',(1.125,-2.5,0.2));
+#3668 = LINE('',#3669,#3670);
+#3669 = CARTESIAN_POINT('',(1.125,-2.225,0.2));
+#3670 = VECTOR('',#3671,1.);
+#3671 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3672 = ORIENTED_EDGE('',*,*,#3673,.F.);
+#3673 = EDGE_CURVE('',#3655,#3666,#3674,.T.);
+#3674 = LINE('',#3675,#3676);
+#3675 = CARTESIAN_POINT('',(1.125,-2.5,0.));
+#3676 = VECTOR('',#3677,1.);
+#3677 = DIRECTION('',(0.,0.,1.));
+#3678 = PLANE('',#3679);
+#3679 = AXIS2_PLACEMENT_3D('',#3680,#3681,#3682);
+#3680 = CARTESIAN_POINT('',(1.125,-2.225,0.));
+#3681 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3682 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3683 = ADVANCED_FACE('',(#3684),#3718,.F.);
+#3684 = FACE_BOUND('',#3685,.F.);
+#3685 = EDGE_LOOP('',(#3686,#3696,#3704,#3710,#3711,#3712));
+#3686 = ORIENTED_EDGE('',*,*,#3687,.F.);
+#3687 = EDGE_CURVE('',#3688,#3690,#3692,.T.);
+#3688 = VERTEX_POINT('',#3689);
+#3689 = CARTESIAN_POINT('',(0.875,-2.5,0.));
+#3690 = VERTEX_POINT('',#3691);
+#3691 = CARTESIAN_POINT('',(0.875,-2.225,0.));
+#3692 = LINE('',#3693,#3694);
+#3693 = CARTESIAN_POINT('',(0.875,-2.5,0.));
+#3694 = VECTOR('',#3695,1.);
+#3695 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3696 = ORIENTED_EDGE('',*,*,#3697,.T.);
+#3697 = EDGE_CURVE('',#3688,#3698,#3700,.T.);
+#3698 = VERTEX_POINT('',#3699);
+#3699 = CARTESIAN_POINT('',(0.875,-2.5,0.2));
+#3700 = LINE('',#3701,#3702);
+#3701 = CARTESIAN_POINT('',(0.875,-2.5,0.));
+#3702 = VECTOR('',#3703,1.);
+#3703 = DIRECTION('',(0.,0.,1.));
+#3704 = ORIENTED_EDGE('',*,*,#3705,.T.);
+#3705 = EDGE_CURVE('',#3698,#3422,#3706,.T.);
+#3706 = LINE('',#3707,#3708);
+#3707 = CARTESIAN_POINT('',(0.875,-2.5,0.2));
+#3708 = VECTOR('',#3709,1.);
+#3709 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3710 = ORIENTED_EDGE('',*,*,#3429,.T.);
+#3711 = ORIENTED_EDGE('',*,*,#596,.F.);
+#3712 = ORIENTED_EDGE('',*,*,#3713,.F.);
+#3713 = EDGE_CURVE('',#3690,#588,#3714,.T.);
+#3714 = LINE('',#3715,#3716);
+#3715 = CARTESIAN_POINT('',(0.875,-2.225,0.));
+#3716 = VECTOR('',#3717,1.);
+#3717 = DIRECTION('',(0.,0.,1.));
+#3718 = PLANE('',#3719);
+#3719 = AXIS2_PLACEMENT_3D('',#3720,#3721,#3722);
+#3720 = CARTESIAN_POINT('',(0.875,-2.5,0.));
+#3721 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#3722 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3723 = ADVANCED_FACE('',(#3724),#3743,.T.);
+#3724 = FACE_BOUND('',#3725,.F.);
+#3725 = EDGE_LOOP('',(#3726,#3735,#3736,#3737));
+#3726 = ORIENTED_EDGE('',*,*,#3727,.F.);
+#3727 = EDGE_CURVE('',#3690,#3728,#3730,.T.);
+#3728 = VERTEX_POINT('',#3729);
+#3729 = CARTESIAN_POINT('',(0.625,-2.225,0.));
+#3730 = CIRCLE('',#3731,0.125);
+#3731 = AXIS2_PLACEMENT_3D('',#3732,#3733,#3734);
+#3732 = CARTESIAN_POINT('',(0.75,-2.225,0.));
+#3733 = DIRECTION('',(-0.,0.,1.));
+#3734 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3735 = ORIENTED_EDGE('',*,*,#3713,.T.);
+#3736 = ORIENTED_EDGE('',*,*,#587,.F.);
+#3737 = ORIENTED_EDGE('',*,*,#3738,.F.);
+#3738 = EDGE_CURVE('',#3728,#580,#3739,.T.);
+#3739 = LINE('',#3740,#3741);
+#3740 = CARTESIAN_POINT('',(0.625,-2.225,0.));
+#3741 = VECTOR('',#3742,1.);
+#3742 = DIRECTION('',(0.,0.,1.));
+#3743 = CYLINDRICAL_SURFACE('',#3744,0.125);
+#3744 = AXIS2_PLACEMENT_3D('',#3745,#3746,#3747);
+#3745 = CARTESIAN_POINT('',(0.75,-2.225,0.));
+#3746 = DIRECTION('',(-0.,0.,-1.));
+#3747 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3748 = ADVANCED_FACE('',(#3749),#3776,.F.);
+#3749 = FACE_BOUND('',#3750,.F.);
+#3750 = EDGE_LOOP('',(#3751,#3759,#3760,#3761,#3762,#3770));
+#3751 = ORIENTED_EDGE('',*,*,#3752,.F.);
+#3752 = EDGE_CURVE('',#3728,#3753,#3755,.T.);
+#3753 = VERTEX_POINT('',#3754);
+#3754 = CARTESIAN_POINT('',(0.625,-2.5,0.));
+#3755 = LINE('',#3756,#3757);
+#3756 = CARTESIAN_POINT('',(0.625,-2.225,0.));
+#3757 = VECTOR('',#3758,1.);
+#3758 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3759 = ORIENTED_EDGE('',*,*,#3738,.T.);
+#3760 = ORIENTED_EDGE('',*,*,#579,.F.);
+#3761 = ORIENTED_EDGE('',*,*,#3413,.T.);
+#3762 = ORIENTED_EDGE('',*,*,#3763,.T.);
+#3763 = EDGE_CURVE('',#3414,#3764,#3766,.T.);
+#3764 = VERTEX_POINT('',#3765);
+#3765 = CARTESIAN_POINT('',(0.625,-2.5,0.2));
+#3766 = LINE('',#3767,#3768);
+#3767 = CARTESIAN_POINT('',(0.625,-2.225,0.2));
+#3768 = VECTOR('',#3769,1.);
+#3769 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3770 = ORIENTED_EDGE('',*,*,#3771,.F.);
+#3771 = EDGE_CURVE('',#3753,#3764,#3772,.T.);
+#3772 = LINE('',#3773,#3774);
+#3773 = CARTESIAN_POINT('',(0.625,-2.5,0.));
+#3774 = VECTOR('',#3775,1.);
+#3775 = DIRECTION('',(0.,0.,1.));
+#3776 = PLANE('',#3777);
+#3777 = AXIS2_PLACEMENT_3D('',#3778,#3779,#3780);
+#3778 = CARTESIAN_POINT('',(0.625,-2.225,0.));
+#3779 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3780 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3781 = ADVANCED_FACE('',(#3782),#3816,.F.);
+#3782 = FACE_BOUND('',#3783,.F.);
+#3783 = EDGE_LOOP('',(#3784,#3794,#3802,#3808,#3809,#3810));
+#3784 = ORIENTED_EDGE('',*,*,#3785,.F.);
+#3785 = EDGE_CURVE('',#3786,#3788,#3790,.T.);
+#3786 = VERTEX_POINT('',#3787);
+#3787 = CARTESIAN_POINT('',(0.375,-2.5,0.));
+#3788 = VERTEX_POINT('',#3789);
+#3789 = CARTESIAN_POINT('',(0.375,-2.225,0.));
+#3790 = LINE('',#3791,#3792);
+#3791 = CARTESIAN_POINT('',(0.375,-2.5,0.));
+#3792 = VECTOR('',#3793,1.);
+#3793 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3794 = ORIENTED_EDGE('',*,*,#3795,.T.);
+#3795 = EDGE_CURVE('',#3786,#3796,#3798,.T.);
+#3796 = VERTEX_POINT('',#3797);
+#3797 = CARTESIAN_POINT('',(0.375,-2.5,0.2));
+#3798 = LINE('',#3799,#3800);
+#3799 = CARTESIAN_POINT('',(0.375,-2.5,0.));
+#3800 = VECTOR('',#3801,1.);
+#3801 = DIRECTION('',(0.,0.,1.));
+#3802 = ORIENTED_EDGE('',*,*,#3803,.T.);
+#3803 = EDGE_CURVE('',#3796,#3399,#3804,.T.);
+#3804 = LINE('',#3805,#3806);
+#3805 = CARTESIAN_POINT('',(0.375,-2.5,0.2));
+#3806 = VECTOR('',#3807,1.);
+#3807 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3808 = ORIENTED_EDGE('',*,*,#3406,.T.);
+#3809 = ORIENTED_EDGE('',*,*,#563,.F.);
+#3810 = ORIENTED_EDGE('',*,*,#3811,.F.);
+#3811 = EDGE_CURVE('',#3788,#555,#3812,.T.);
+#3812 = LINE('',#3813,#3814);
+#3813 = CARTESIAN_POINT('',(0.375,-2.225,0.));
+#3814 = VECTOR('',#3815,1.);
+#3815 = DIRECTION('',(0.,0.,1.));
+#3816 = PLANE('',#3817);
+#3817 = AXIS2_PLACEMENT_3D('',#3818,#3819,#3820);
+#3818 = CARTESIAN_POINT('',(0.375,-2.5,0.));
+#3819 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#3820 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3821 = ADVANCED_FACE('',(#3822),#3841,.T.);
+#3822 = FACE_BOUND('',#3823,.F.);
+#3823 = EDGE_LOOP('',(#3824,#3833,#3834,#3835));
+#3824 = ORIENTED_EDGE('',*,*,#3825,.F.);
+#3825 = EDGE_CURVE('',#3788,#3826,#3828,.T.);
+#3826 = VERTEX_POINT('',#3827);
+#3827 = CARTESIAN_POINT('',(0.125,-2.225,0.));
+#3828 = CIRCLE('',#3829,0.125);
+#3829 = AXIS2_PLACEMENT_3D('',#3830,#3831,#3832);
+#3830 = CARTESIAN_POINT('',(0.25,-2.225,0.));
+#3831 = DIRECTION('',(-0.,0.,1.));
+#3832 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3833 = ORIENTED_EDGE('',*,*,#3811,.T.);
+#3834 = ORIENTED_EDGE('',*,*,#554,.F.);
+#3835 = ORIENTED_EDGE('',*,*,#3836,.F.);
+#3836 = EDGE_CURVE('',#3826,#547,#3837,.T.);
+#3837 = LINE('',#3838,#3839);
+#3838 = CARTESIAN_POINT('',(0.125,-2.225,0.));
+#3839 = VECTOR('',#3840,1.);
+#3840 = DIRECTION('',(0.,0.,1.));
+#3841 = CYLINDRICAL_SURFACE('',#3842,0.125);
+#3842 = AXIS2_PLACEMENT_3D('',#3843,#3844,#3845);
+#3843 = CARTESIAN_POINT('',(0.25,-2.225,0.));
+#3844 = DIRECTION('',(-0.,0.,-1.));
+#3845 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3846 = ADVANCED_FACE('',(#3847),#3874,.F.);
+#3847 = FACE_BOUND('',#3848,.F.);
+#3848 = EDGE_LOOP('',(#3849,#3857,#3858,#3859,#3860,#3868));
+#3849 = ORIENTED_EDGE('',*,*,#3850,.F.);
+#3850 = EDGE_CURVE('',#3826,#3851,#3853,.T.);
+#3851 = VERTEX_POINT('',#3852);
+#3852 = CARTESIAN_POINT('',(0.125,-2.5,0.));
+#3853 = LINE('',#3854,#3855);
+#3854 = CARTESIAN_POINT('',(0.125,-2.225,0.));
+#3855 = VECTOR('',#3856,1.);
+#3856 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3857 = ORIENTED_EDGE('',*,*,#3836,.T.);
+#3858 = ORIENTED_EDGE('',*,*,#546,.F.);
+#3859 = ORIENTED_EDGE('',*,*,#3390,.T.);
+#3860 = ORIENTED_EDGE('',*,*,#3861,.T.);
+#3861 = EDGE_CURVE('',#3391,#3862,#3864,.T.);
+#3862 = VERTEX_POINT('',#3863);
+#3863 = CARTESIAN_POINT('',(0.125,-2.5,0.2));
+#3864 = LINE('',#3865,#3866);
+#3865 = CARTESIAN_POINT('',(0.125,-2.225,0.2));
+#3866 = VECTOR('',#3867,1.);
+#3867 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3868 = ORIENTED_EDGE('',*,*,#3869,.F.);
+#3869 = EDGE_CURVE('',#3851,#3862,#3870,.T.);
+#3870 = LINE('',#3871,#3872);
+#3871 = CARTESIAN_POINT('',(0.125,-2.5,0.));
+#3872 = VECTOR('',#3873,1.);
+#3873 = DIRECTION('',(0.,0.,1.));
+#3874 = PLANE('',#3875);
+#3875 = AXIS2_PLACEMENT_3D('',#3876,#3877,#3878);
+#3876 = CARTESIAN_POINT('',(0.125,-2.225,0.));
+#3877 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3878 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3879 = ADVANCED_FACE('',(#3880),#3914,.F.);
+#3880 = FACE_BOUND('',#3881,.F.);
+#3881 = EDGE_LOOP('',(#3882,#3892,#3900,#3906,#3907,#3908));
+#3882 = ORIENTED_EDGE('',*,*,#3883,.F.);
+#3883 = EDGE_CURVE('',#3884,#3886,#3888,.T.);
+#3884 = VERTEX_POINT('',#3885);
+#3885 = CARTESIAN_POINT('',(-0.125,-2.5,0.));
+#3886 = VERTEX_POINT('',#3887);
+#3887 = CARTESIAN_POINT('',(-0.125,-2.225,0.));
+#3888 = LINE('',#3889,#3890);
+#3889 = CARTESIAN_POINT('',(-0.125,-2.5,0.));
+#3890 = VECTOR('',#3891,1.);
+#3891 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3892 = ORIENTED_EDGE('',*,*,#3893,.T.);
+#3893 = EDGE_CURVE('',#3884,#3894,#3896,.T.);
+#3894 = VERTEX_POINT('',#3895);
+#3895 = CARTESIAN_POINT('',(-0.125,-2.5,0.2));
+#3896 = LINE('',#3897,#3898);
+#3897 = CARTESIAN_POINT('',(-0.125,-2.5,0.));
+#3898 = VECTOR('',#3899,1.);
+#3899 = DIRECTION('',(0.,0.,1.));
+#3900 = ORIENTED_EDGE('',*,*,#3901,.T.);
+#3901 = EDGE_CURVE('',#3894,#3376,#3902,.T.);
+#3902 = LINE('',#3903,#3904);
+#3903 = CARTESIAN_POINT('',(-0.125,-2.5,0.2));
+#3904 = VECTOR('',#3905,1.);
+#3905 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3906 = ORIENTED_EDGE('',*,*,#3383,.T.);
+#3907 = ORIENTED_EDGE('',*,*,#530,.F.);
+#3908 = ORIENTED_EDGE('',*,*,#3909,.F.);
+#3909 = EDGE_CURVE('',#3886,#522,#3910,.T.);
+#3910 = LINE('',#3911,#3912);
+#3911 = CARTESIAN_POINT('',(-0.125,-2.225,0.));
+#3912 = VECTOR('',#3913,1.);
+#3913 = DIRECTION('',(0.,0.,1.));
+#3914 = PLANE('',#3915);
+#3915 = AXIS2_PLACEMENT_3D('',#3916,#3917,#3918);
+#3916 = CARTESIAN_POINT('',(-0.125,-2.5,0.));
+#3917 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#3918 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3919 = ADVANCED_FACE('',(#3920),#3939,.T.);
+#3920 = FACE_BOUND('',#3921,.F.);
+#3921 = EDGE_LOOP('',(#3922,#3931,#3932,#3933));
+#3922 = ORIENTED_EDGE('',*,*,#3923,.F.);
+#3923 = EDGE_CURVE('',#3886,#3924,#3926,.T.);
+#3924 = VERTEX_POINT('',#3925);
+#3925 = CARTESIAN_POINT('',(-0.375,-2.225,0.));
+#3926 = CIRCLE('',#3927,0.125);
+#3927 = AXIS2_PLACEMENT_3D('',#3928,#3929,#3930);
+#3928 = CARTESIAN_POINT('',(-0.25,-2.225,0.));
+#3929 = DIRECTION('',(-0.,0.,1.));
+#3930 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3931 = ORIENTED_EDGE('',*,*,#3909,.T.);
+#3932 = ORIENTED_EDGE('',*,*,#521,.F.);
+#3933 = ORIENTED_EDGE('',*,*,#3934,.F.);
+#3934 = EDGE_CURVE('',#3924,#514,#3935,.T.);
+#3935 = LINE('',#3936,#3937);
+#3936 = CARTESIAN_POINT('',(-0.375,-2.225,0.));
+#3937 = VECTOR('',#3938,1.);
+#3938 = DIRECTION('',(0.,0.,1.));
+#3939 = CYLINDRICAL_SURFACE('',#3940,0.125);
+#3940 = AXIS2_PLACEMENT_3D('',#3941,#3942,#3943);
+#3941 = CARTESIAN_POINT('',(-0.25,-2.225,0.));
+#3942 = DIRECTION('',(-0.,0.,-1.));
+#3943 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3944 = ADVANCED_FACE('',(#3945),#3972,.F.);
+#3945 = FACE_BOUND('',#3946,.F.);
+#3946 = EDGE_LOOP('',(#3947,#3955,#3956,#3957,#3958,#3966));
+#3947 = ORIENTED_EDGE('',*,*,#3948,.F.);
+#3948 = EDGE_CURVE('',#3924,#3949,#3951,.T.);
+#3949 = VERTEX_POINT('',#3950);
+#3950 = CARTESIAN_POINT('',(-0.375,-2.5,0.));
+#3951 = LINE('',#3952,#3953);
+#3952 = CARTESIAN_POINT('',(-0.375,-2.225,0.));
+#3953 = VECTOR('',#3954,1.);
+#3954 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3955 = ORIENTED_EDGE('',*,*,#3934,.T.);
+#3956 = ORIENTED_EDGE('',*,*,#513,.F.);
+#3957 = ORIENTED_EDGE('',*,*,#3367,.T.);
+#3958 = ORIENTED_EDGE('',*,*,#3959,.T.);
+#3959 = EDGE_CURVE('',#3368,#3960,#3962,.T.);
+#3960 = VERTEX_POINT('',#3961);
+#3961 = CARTESIAN_POINT('',(-0.375,-2.5,0.2));
+#3962 = LINE('',#3963,#3964);
+#3963 = CARTESIAN_POINT('',(-0.375,-2.225,0.2));
+#3964 = VECTOR('',#3965,1.);
+#3965 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3966 = ORIENTED_EDGE('',*,*,#3967,.F.);
+#3967 = EDGE_CURVE('',#3949,#3960,#3968,.T.);
+#3968 = LINE('',#3969,#3970);
+#3969 = CARTESIAN_POINT('',(-0.375,-2.5,0.));
+#3970 = VECTOR('',#3971,1.);
+#3971 = DIRECTION('',(0.,0.,1.));
+#3972 = PLANE('',#3973);
+#3973 = AXIS2_PLACEMENT_3D('',#3974,#3975,#3976);
+#3974 = CARTESIAN_POINT('',(-0.375,-2.225,0.));
+#3975 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#3976 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#3977 = ADVANCED_FACE('',(#3978),#4012,.F.);
+#3978 = FACE_BOUND('',#3979,.F.);
+#3979 = EDGE_LOOP('',(#3980,#3990,#3998,#4004,#4005,#4006));
+#3980 = ORIENTED_EDGE('',*,*,#3981,.F.);
+#3981 = EDGE_CURVE('',#3982,#3984,#3986,.T.);
+#3982 = VERTEX_POINT('',#3983);
+#3983 = CARTESIAN_POINT('',(-0.625,-2.5,0.));
+#3984 = VERTEX_POINT('',#3985);
+#3985 = CARTESIAN_POINT('',(-0.625,-2.225,0.));
+#3986 = LINE('',#3987,#3988);
+#3987 = CARTESIAN_POINT('',(-0.625,-2.5,0.));
+#3988 = VECTOR('',#3989,1.);
+#3989 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#3990 = ORIENTED_EDGE('',*,*,#3991,.T.);
+#3991 = EDGE_CURVE('',#3982,#3992,#3994,.T.);
+#3992 = VERTEX_POINT('',#3993);
+#3993 = CARTESIAN_POINT('',(-0.625,-2.5,0.2));
+#3994 = LINE('',#3995,#3996);
+#3995 = CARTESIAN_POINT('',(-0.625,-2.5,0.));
+#3996 = VECTOR('',#3997,1.);
+#3997 = DIRECTION('',(0.,0.,1.));
+#3998 = ORIENTED_EDGE('',*,*,#3999,.T.);
+#3999 = EDGE_CURVE('',#3992,#3353,#4000,.T.);
+#4000 = LINE('',#4001,#4002);
+#4001 = CARTESIAN_POINT('',(-0.625,-2.5,0.2));
+#4002 = VECTOR('',#4003,1.);
+#4003 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4004 = ORIENTED_EDGE('',*,*,#3360,.T.);
+#4005 = ORIENTED_EDGE('',*,*,#497,.F.);
+#4006 = ORIENTED_EDGE('',*,*,#4007,.F.);
+#4007 = EDGE_CURVE('',#3984,#489,#4008,.T.);
+#4008 = LINE('',#4009,#4010);
+#4009 = CARTESIAN_POINT('',(-0.625,-2.225,0.));
+#4010 = VECTOR('',#4011,1.);
+#4011 = DIRECTION('',(0.,0.,1.));
+#4012 = PLANE('',#4013);
+#4013 = AXIS2_PLACEMENT_3D('',#4014,#4015,#4016);
+#4014 = CARTESIAN_POINT('',(-0.625,-2.5,0.));
+#4015 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#4016 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4017 = ADVANCED_FACE('',(#4018),#4037,.T.);
+#4018 = FACE_BOUND('',#4019,.F.);
+#4019 = EDGE_LOOP('',(#4020,#4029,#4030,#4031));
+#4020 = ORIENTED_EDGE('',*,*,#4021,.F.);
+#4021 = EDGE_CURVE('',#3984,#4022,#4024,.T.);
+#4022 = VERTEX_POINT('',#4023);
+#4023 = CARTESIAN_POINT('',(-0.875,-2.225,0.));
+#4024 = CIRCLE('',#4025,0.125);
+#4025 = AXIS2_PLACEMENT_3D('',#4026,#4027,#4028);
+#4026 = CARTESIAN_POINT('',(-0.75,-2.225,0.));
+#4027 = DIRECTION('',(-0.,0.,1.));
+#4028 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4029 = ORIENTED_EDGE('',*,*,#4007,.T.);
+#4030 = ORIENTED_EDGE('',*,*,#488,.F.);
+#4031 = ORIENTED_EDGE('',*,*,#4032,.F.);
+#4032 = EDGE_CURVE('',#4022,#481,#4033,.T.);
+#4033 = LINE('',#4034,#4035);
+#4034 = CARTESIAN_POINT('',(-0.875,-2.225,0.));
+#4035 = VECTOR('',#4036,1.);
+#4036 = DIRECTION('',(0.,0.,1.));
+#4037 = CYLINDRICAL_SURFACE('',#4038,0.125);
+#4038 = AXIS2_PLACEMENT_3D('',#4039,#4040,#4041);
+#4039 = CARTESIAN_POINT('',(-0.75,-2.225,0.));
+#4040 = DIRECTION('',(-0.,0.,-1.));
+#4041 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4042 = ADVANCED_FACE('',(#4043),#4070,.F.);
+#4043 = FACE_BOUND('',#4044,.F.);
+#4044 = EDGE_LOOP('',(#4045,#4053,#4054,#4055,#4056,#4064));
+#4045 = ORIENTED_EDGE('',*,*,#4046,.F.);
+#4046 = EDGE_CURVE('',#4022,#4047,#4049,.T.);
+#4047 = VERTEX_POINT('',#4048);
+#4048 = CARTESIAN_POINT('',(-0.875,-2.5,0.));
+#4049 = LINE('',#4050,#4051);
+#4050 = CARTESIAN_POINT('',(-0.875,-2.225,0.));
+#4051 = VECTOR('',#4052,1.);
+#4052 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4053 = ORIENTED_EDGE('',*,*,#4032,.T.);
+#4054 = ORIENTED_EDGE('',*,*,#480,.F.);
+#4055 = ORIENTED_EDGE('',*,*,#3344,.T.);
+#4056 = ORIENTED_EDGE('',*,*,#4057,.T.);
+#4057 = EDGE_CURVE('',#3345,#4058,#4060,.T.);
+#4058 = VERTEX_POINT('',#4059);
+#4059 = CARTESIAN_POINT('',(-0.875,-2.5,0.2));
+#4060 = LINE('',#4061,#4062);
+#4061 = CARTESIAN_POINT('',(-0.875,-2.225,0.2));
+#4062 = VECTOR('',#4063,1.);
+#4063 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4064 = ORIENTED_EDGE('',*,*,#4065,.F.);
+#4065 = EDGE_CURVE('',#4047,#4058,#4066,.T.);
+#4066 = LINE('',#4067,#4068);
+#4067 = CARTESIAN_POINT('',(-0.875,-2.5,0.));
+#4068 = VECTOR('',#4069,1.);
+#4069 = DIRECTION('',(0.,0.,1.));
+#4070 = PLANE('',#4071);
+#4071 = AXIS2_PLACEMENT_3D('',#4072,#4073,#4074);
+#4072 = CARTESIAN_POINT('',(-0.875,-2.225,0.));
+#4073 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4074 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4075 = ADVANCED_FACE('',(#4076),#4110,.F.);
+#4076 = FACE_BOUND('',#4077,.F.);
+#4077 = EDGE_LOOP('',(#4078,#4088,#4096,#4102,#4103,#4104));
+#4078 = ORIENTED_EDGE('',*,*,#4079,.F.);
+#4079 = EDGE_CURVE('',#4080,#4082,#4084,.T.);
+#4080 = VERTEX_POINT('',#4081);
+#4081 = CARTESIAN_POINT('',(-1.125,-2.5,0.));
+#4082 = VERTEX_POINT('',#4083);
+#4083 = CARTESIAN_POINT('',(-1.125,-2.225,0.));
+#4084 = LINE('',#4085,#4086);
+#4085 = CARTESIAN_POINT('',(-1.125,-2.5,0.));
+#4086 = VECTOR('',#4087,1.);
+#4087 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4088 = ORIENTED_EDGE('',*,*,#4089,.T.);
+#4089 = EDGE_CURVE('',#4080,#4090,#4092,.T.);
+#4090 = VERTEX_POINT('',#4091);
+#4091 = CARTESIAN_POINT('',(-1.125,-2.5,0.2));
+#4092 = LINE('',#4093,#4094);
+#4093 = CARTESIAN_POINT('',(-1.125,-2.5,0.));
+#4094 = VECTOR('',#4095,1.);
+#4095 = DIRECTION('',(0.,0.,1.));
+#4096 = ORIENTED_EDGE('',*,*,#4097,.T.);
+#4097 = EDGE_CURVE('',#4090,#3330,#4098,.T.);
+#4098 = LINE('',#4099,#4100);
+#4099 = CARTESIAN_POINT('',(-1.125,-2.5,0.2));
+#4100 = VECTOR('',#4101,1.);
+#4101 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4102 = ORIENTED_EDGE('',*,*,#3337,.T.);
+#4103 = ORIENTED_EDGE('',*,*,#464,.F.);
+#4104 = ORIENTED_EDGE('',*,*,#4105,.F.);
+#4105 = EDGE_CURVE('',#4082,#456,#4106,.T.);
+#4106 = LINE('',#4107,#4108);
+#4107 = CARTESIAN_POINT('',(-1.125,-2.225,0.));
+#4108 = VECTOR('',#4109,1.);
+#4109 = DIRECTION('',(0.,0.,1.));
+#4110 = PLANE('',#4111);
+#4111 = AXIS2_PLACEMENT_3D('',#4112,#4113,#4114);
+#4112 = CARTESIAN_POINT('',(-1.125,-2.5,0.));
+#4113 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#4114 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4115 = ADVANCED_FACE('',(#4116),#4135,.T.);
+#4116 = FACE_BOUND('',#4117,.F.);
+#4117 = EDGE_LOOP('',(#4118,#4127,#4128,#4129));
+#4118 = ORIENTED_EDGE('',*,*,#4119,.F.);
+#4119 = EDGE_CURVE('',#4082,#4120,#4122,.T.);
+#4120 = VERTEX_POINT('',#4121);
+#4121 = CARTESIAN_POINT('',(-1.375,-2.225,0.));
+#4122 = CIRCLE('',#4123,0.125);
+#4123 = AXIS2_PLACEMENT_3D('',#4124,#4125,#4126);
+#4124 = CARTESIAN_POINT('',(-1.25,-2.225,0.));
+#4125 = DIRECTION('',(-0.,0.,1.));
+#4126 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4127 = ORIENTED_EDGE('',*,*,#4105,.T.);
+#4128 = ORIENTED_EDGE('',*,*,#455,.F.);
+#4129 = ORIENTED_EDGE('',*,*,#4130,.F.);
+#4130 = EDGE_CURVE('',#4120,#448,#4131,.T.);
+#4131 = LINE('',#4132,#4133);
+#4132 = CARTESIAN_POINT('',(-1.375,-2.225,0.));
+#4133 = VECTOR('',#4134,1.);
+#4134 = DIRECTION('',(0.,0.,1.));
+#4135 = CYLINDRICAL_SURFACE('',#4136,0.125);
+#4136 = AXIS2_PLACEMENT_3D('',#4137,#4138,#4139);
+#4137 = CARTESIAN_POINT('',(-1.25,-2.225,0.));
+#4138 = DIRECTION('',(-0.,0.,-1.));
+#4139 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4140 = ADVANCED_FACE('',(#4141),#4168,.F.);
+#4141 = FACE_BOUND('',#4142,.F.);
+#4142 = EDGE_LOOP('',(#4143,#4151,#4152,#4153,#4154,#4162));
+#4143 = ORIENTED_EDGE('',*,*,#4144,.F.);
+#4144 = EDGE_CURVE('',#4120,#4145,#4147,.T.);
+#4145 = VERTEX_POINT('',#4146);
+#4146 = CARTESIAN_POINT('',(-1.375,-2.5,0.));
+#4147 = LINE('',#4148,#4149);
+#4148 = CARTESIAN_POINT('',(-1.375,-2.225,0.));
+#4149 = VECTOR('',#4150,1.);
+#4150 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4151 = ORIENTED_EDGE('',*,*,#4130,.T.);
+#4152 = ORIENTED_EDGE('',*,*,#447,.F.);
+#4153 = ORIENTED_EDGE('',*,*,#3321,.T.);
+#4154 = ORIENTED_EDGE('',*,*,#4155,.T.);
+#4155 = EDGE_CURVE('',#3322,#4156,#4158,.T.);
+#4156 = VERTEX_POINT('',#4157);
+#4157 = CARTESIAN_POINT('',(-1.375,-2.5,0.2));
+#4158 = LINE('',#4159,#4160);
+#4159 = CARTESIAN_POINT('',(-1.375,-2.225,0.2));
+#4160 = VECTOR('',#4161,1.);
+#4161 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4162 = ORIENTED_EDGE('',*,*,#4163,.F.);
+#4163 = EDGE_CURVE('',#4145,#4156,#4164,.T.);
+#4164 = LINE('',#4165,#4166);
+#4165 = CARTESIAN_POINT('',(-1.375,-2.5,0.));
+#4166 = VECTOR('',#4167,1.);
+#4167 = DIRECTION('',(0.,0.,1.));
+#4168 = PLANE('',#4169);
+#4169 = AXIS2_PLACEMENT_3D('',#4170,#4171,#4172);
+#4170 = CARTESIAN_POINT('',(-1.375,-2.225,0.));
+#4171 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4172 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4173 = ADVANCED_FACE('',(#4174),#4208,.F.);
+#4174 = FACE_BOUND('',#4175,.F.);
+#4175 = EDGE_LOOP('',(#4176,#4186,#4194,#4200,#4201,#4202));
+#4176 = ORIENTED_EDGE('',*,*,#4177,.F.);
+#4177 = EDGE_CURVE('',#4178,#4180,#4182,.T.);
+#4178 = VERTEX_POINT('',#4179);
+#4179 = CARTESIAN_POINT('',(-1.625,-2.5,0.));
+#4180 = VERTEX_POINT('',#4181);
+#4181 = CARTESIAN_POINT('',(-1.625,-2.225,0.));
+#4182 = LINE('',#4183,#4184);
+#4183 = CARTESIAN_POINT('',(-1.625,-2.5,0.));
+#4184 = VECTOR('',#4185,1.);
+#4185 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4186 = ORIENTED_EDGE('',*,*,#4187,.T.);
+#4187 = EDGE_CURVE('',#4178,#4188,#4190,.T.);
+#4188 = VERTEX_POINT('',#4189);
+#4189 = CARTESIAN_POINT('',(-1.625,-2.5,0.2));
+#4190 = LINE('',#4191,#4192);
+#4191 = CARTESIAN_POINT('',(-1.625,-2.5,0.));
+#4192 = VECTOR('',#4193,1.);
+#4193 = DIRECTION('',(0.,0.,1.));
+#4194 = ORIENTED_EDGE('',*,*,#4195,.T.);
+#4195 = EDGE_CURVE('',#4188,#3307,#4196,.T.);
+#4196 = LINE('',#4197,#4198);
+#4197 = CARTESIAN_POINT('',(-1.625,-2.5,0.2));
+#4198 = VECTOR('',#4199,1.);
+#4199 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4200 = ORIENTED_EDGE('',*,*,#3314,.T.);
+#4201 = ORIENTED_EDGE('',*,*,#431,.F.);
+#4202 = ORIENTED_EDGE('',*,*,#4203,.F.);
+#4203 = EDGE_CURVE('',#4180,#423,#4204,.T.);
+#4204 = LINE('',#4205,#4206);
+#4205 = CARTESIAN_POINT('',(-1.625,-2.225,0.));
+#4206 = VECTOR('',#4207,1.);
+#4207 = DIRECTION('',(0.,0.,1.));
+#4208 = PLANE('',#4209);
+#4209 = AXIS2_PLACEMENT_3D('',#4210,#4211,#4212);
+#4210 = CARTESIAN_POINT('',(-1.625,-2.5,0.));
+#4211 = DIRECTION('',(-1.,5.665538897648E-16,0.));
+#4212 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#4213 = ADVANCED_FACE('',(#4214),#4233,.T.);
+#4214 = FACE_BOUND('',#4215,.F.);
+#4215 = EDGE_LOOP('',(#4216,#4225,#4226,#4227));
+#4216 = ORIENTED_EDGE('',*,*,#4217,.F.);
+#4217 = EDGE_CURVE('',#4180,#4218,#4220,.T.);
+#4218 = VERTEX_POINT('',#4219);
+#4219 = CARTESIAN_POINT('',(-1.875,-2.225,0.));
+#4220 = CIRCLE('',#4221,0.125);
+#4221 = AXIS2_PLACEMENT_3D('',#4222,#4223,#4224);
+#4222 = CARTESIAN_POINT('',(-1.75,-2.225,0.));
+#4223 = DIRECTION('',(-0.,0.,1.));
+#4224 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4225 = ORIENTED_EDGE('',*,*,#4203,.T.);
+#4226 = ORIENTED_EDGE('',*,*,#422,.F.);
+#4227 = ORIENTED_EDGE('',*,*,#4228,.F.);
+#4228 = EDGE_CURVE('',#4218,#415,#4229,.T.);
+#4229 = LINE('',#4230,#4231);
+#4230 = CARTESIAN_POINT('',(-1.875,-2.225,0.));
+#4231 = VECTOR('',#4232,1.);
+#4232 = DIRECTION('',(0.,0.,1.));
+#4233 = CYLINDRICAL_SURFACE('',#4234,0.125);
+#4234 = AXIS2_PLACEMENT_3D('',#4235,#4236,#4237);
+#4235 = CARTESIAN_POINT('',(-1.75,-2.225,0.));
+#4236 = DIRECTION('',(-0.,0.,-1.));
+#4237 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4238 = ADVANCED_FACE('',(#4239),#4266,.F.);
+#4239 = FACE_BOUND('',#4240,.F.);
+#4240 = EDGE_LOOP('',(#4241,#4249,#4250,#4251,#4252,#4260));
+#4241 = ORIENTED_EDGE('',*,*,#4242,.F.);
+#4242 = EDGE_CURVE('',#4218,#4243,#4245,.T.);
+#4243 = VERTEX_POINT('',#4244);
+#4244 = CARTESIAN_POINT('',(-1.875,-2.5,0.));
+#4245 = LINE('',#4246,#4247);
+#4246 = CARTESIAN_POINT('',(-1.875,-2.225,0.));
+#4247 = VECTOR('',#4248,1.);
+#4248 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4249 = ORIENTED_EDGE('',*,*,#4228,.T.);
+#4250 = ORIENTED_EDGE('',*,*,#414,.F.);
+#4251 = ORIENTED_EDGE('',*,*,#3298,.T.);
+#4252 = ORIENTED_EDGE('',*,*,#4253,.T.);
+#4253 = EDGE_CURVE('',#3299,#4254,#4256,.T.);
+#4254 = VERTEX_POINT('',#4255);
+#4255 = CARTESIAN_POINT('',(-1.875,-2.5,0.2));
+#4256 = LINE('',#4257,#4258);
+#4257 = CARTESIAN_POINT('',(-1.875,-2.225,0.2));
+#4258 = VECTOR('',#4259,1.);
+#4259 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4260 = ORIENTED_EDGE('',*,*,#4261,.F.);
+#4261 = EDGE_CURVE('',#4243,#4254,#4262,.T.);
+#4262 = LINE('',#4263,#4264);
+#4263 = CARTESIAN_POINT('',(-1.875,-2.5,0.));
+#4264 = VECTOR('',#4265,1.);
+#4265 = DIRECTION('',(0.,0.,1.));
+#4266 = PLANE('',#4267);
+#4267 = AXIS2_PLACEMENT_3D('',#4268,#4269,#4270);
+#4268 = CARTESIAN_POINT('',(-1.875,-2.225,0.));
+#4269 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#4270 = DIRECTION('',(-5.665538897648E-16,-1.,0.));
+#4271 = ADVANCED_FACE('',(#4272),#4467,.F.);
+#4272 = FACE_BOUND('',#4273,.F.);
+#4273 = EDGE_LOOP('',(#4274,#4275,#4276,#4282,#4283,#4284,#4292,#4300,
+#4306,#4307,#4315,#4323,#4329,#4330,#4338,#4346,#4352,#4353,#4361,
+#4369,#4375,#4376,#4384,#4392,#4398,#4399,#4407,#4415,#4421,#4422,
+#4430,#4438,#4444,#4445,#4453,#4461));
+#4274 = ORIENTED_EDGE('',*,*,#134,.F.);
+#4275 = ORIENTED_EDGE('',*,*,#1302,.T.);
+#4276 = ORIENTED_EDGE('',*,*,#4277,.T.);
+#4277 = EDGE_CURVE('',#1293,#3284,#4278,.T.);
+#4278 = LINE('',#4279,#4280);
+#4279 = CARTESIAN_POINT('',(-2.4875,2.4875,0.875));
+#4280 = VECTOR('',#4281,1.);
+#4281 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4282 = ORIENTED_EDGE('',*,*,#3291,.F.);
+#4283 = ORIENTED_EDGE('',*,*,#398,.F.);
+#4284 = ORIENTED_EDGE('',*,*,#4285,.T.);
+#4285 = EDGE_CURVE('',#391,#4286,#4288,.T.);
+#4286 = VERTEX_POINT('',#4287);
+#4287 = CARTESIAN_POINT('',(-2.4875,-1.875,0.2));
+#4288 = LINE('',#4289,#4290);
+#4289 = CARTESIAN_POINT('',(-2.4875,-1.875,1.25E-02));
+#4290 = VECTOR('',#4291,1.);
+#4291 = DIRECTION('',(0.,0.,1.));
+#4292 = ORIENTED_EDGE('',*,*,#4293,.F.);
+#4293 = EDGE_CURVE('',#4294,#4286,#4296,.T.);
+#4294 = VERTEX_POINT('',#4295);
+#4295 = CARTESIAN_POINT('',(-2.4875,-1.625,0.2));
+#4296 = LINE('',#4297,#4298);
+#4297 = CARTESIAN_POINT('',(-2.4875,0.36875,0.2));
+#4298 = VECTOR('',#4299,1.);
+#4299 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4300 = ORIENTED_EDGE('',*,*,#4301,.T.);
+#4301 = EDGE_CURVE('',#4294,#366,#4302,.T.);
+#4302 = LINE('',#4303,#4304);
+#4303 = CARTESIAN_POINT('',(-2.4875,-1.625,1.25E-02));
+#4304 = VECTOR('',#4305,1.);
+#4305 = DIRECTION('',(0.,-0.,-1.));
+#4306 = ORIENTED_EDGE('',*,*,#365,.F.);
+#4307 = ORIENTED_EDGE('',*,*,#4308,.T.);
+#4308 = EDGE_CURVE('',#358,#4309,#4311,.T.);
+#4309 = VERTEX_POINT('',#4310);
+#4310 = CARTESIAN_POINT('',(-2.4875,-1.375,0.2));
+#4311 = LINE('',#4312,#4313);
+#4312 = CARTESIAN_POINT('',(-2.4875,-1.375,1.25E-02));
+#4313 = VECTOR('',#4314,1.);
+#4314 = DIRECTION('',(0.,0.,1.));
+#4315 = ORIENTED_EDGE('',*,*,#4316,.F.);
+#4316 = EDGE_CURVE('',#4317,#4309,#4319,.T.);
+#4317 = VERTEX_POINT('',#4318);
+#4318 = CARTESIAN_POINT('',(-2.4875,-1.125,0.2));
+#4319 = LINE('',#4320,#4321);
+#4320 = CARTESIAN_POINT('',(-2.4875,0.61875,0.2));
+#4321 = VECTOR('',#4322,1.);
+#4322 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4323 = ORIENTED_EDGE('',*,*,#4324,.T.);
+#4324 = EDGE_CURVE('',#4317,#333,#4325,.T.);
+#4325 = LINE('',#4326,#4327);
+#4326 = CARTESIAN_POINT('',(-2.4875,-1.125,1.25E-02));
+#4327 = VECTOR('',#4328,1.);
+#4328 = DIRECTION('',(0.,-0.,-1.));
+#4329 = ORIENTED_EDGE('',*,*,#332,.F.);
+#4330 = ORIENTED_EDGE('',*,*,#4331,.T.);
+#4331 = EDGE_CURVE('',#325,#4332,#4334,.T.);
+#4332 = VERTEX_POINT('',#4333);
+#4333 = CARTESIAN_POINT('',(-2.4875,-0.875,0.2));
+#4334 = LINE('',#4335,#4336);
+#4335 = CARTESIAN_POINT('',(-2.4875,-0.875,1.25E-02));
+#4336 = VECTOR('',#4337,1.);
+#4337 = DIRECTION('',(0.,0.,1.));
+#4338 = ORIENTED_EDGE('',*,*,#4339,.F.);
+#4339 = EDGE_CURVE('',#4340,#4332,#4342,.T.);
+#4340 = VERTEX_POINT('',#4341);
+#4341 = CARTESIAN_POINT('',(-2.4875,-0.625,0.2));
+#4342 = LINE('',#4343,#4344);
+#4343 = CARTESIAN_POINT('',(-2.4875,0.86875,0.2));
+#4344 = VECTOR('',#4345,1.);
+#4345 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4346 = ORIENTED_EDGE('',*,*,#4347,.T.);
+#4347 = EDGE_CURVE('',#4340,#300,#4348,.T.);
+#4348 = LINE('',#4349,#4350);
+#4349 = CARTESIAN_POINT('',(-2.4875,-0.625,1.25E-02));
+#4350 = VECTOR('',#4351,1.);
+#4351 = DIRECTION('',(0.,-0.,-1.));
+#4352 = ORIENTED_EDGE('',*,*,#299,.F.);
+#4353 = ORIENTED_EDGE('',*,*,#4354,.T.);
+#4354 = EDGE_CURVE('',#292,#4355,#4357,.T.);
+#4355 = VERTEX_POINT('',#4356);
+#4356 = CARTESIAN_POINT('',(-2.4875,-0.375,0.2));
+#4357 = LINE('',#4358,#4359);
+#4358 = CARTESIAN_POINT('',(-2.4875,-0.375,1.25E-02));
+#4359 = VECTOR('',#4360,1.);
+#4360 = DIRECTION('',(0.,0.,1.));
+#4361 = ORIENTED_EDGE('',*,*,#4362,.F.);
+#4362 = EDGE_CURVE('',#4363,#4355,#4365,.T.);
+#4363 = VERTEX_POINT('',#4364);
+#4364 = CARTESIAN_POINT('',(-2.4875,-0.125,0.2));
+#4365 = LINE('',#4366,#4367);
+#4366 = CARTESIAN_POINT('',(-2.4875,1.11875,0.2));
+#4367 = VECTOR('',#4368,1.);
+#4368 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4369 = ORIENTED_EDGE('',*,*,#4370,.T.);
+#4370 = EDGE_CURVE('',#4363,#267,#4371,.T.);
+#4371 = LINE('',#4372,#4373);
+#4372 = CARTESIAN_POINT('',(-2.4875,-0.125,1.25E-02));
+#4373 = VECTOR('',#4374,1.);
+#4374 = DIRECTION('',(0.,-0.,-1.));
+#4375 = ORIENTED_EDGE('',*,*,#266,.F.);
+#4376 = ORIENTED_EDGE('',*,*,#4377,.T.);
+#4377 = EDGE_CURVE('',#259,#4378,#4380,.T.);
+#4378 = VERTEX_POINT('',#4379);
+#4379 = CARTESIAN_POINT('',(-2.4875,0.125,0.2));
+#4380 = LINE('',#4381,#4382);
+#4381 = CARTESIAN_POINT('',(-2.4875,0.125,1.25E-02));
+#4382 = VECTOR('',#4383,1.);
+#4383 = DIRECTION('',(0.,0.,1.));
+#4384 = ORIENTED_EDGE('',*,*,#4385,.F.);
+#4385 = EDGE_CURVE('',#4386,#4378,#4388,.T.);
+#4386 = VERTEX_POINT('',#4387);
+#4387 = CARTESIAN_POINT('',(-2.4875,0.375,0.2));
+#4388 = LINE('',#4389,#4390);
+#4389 = CARTESIAN_POINT('',(-2.4875,1.36875,0.2));
+#4390 = VECTOR('',#4391,1.);
+#4391 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4392 = ORIENTED_EDGE('',*,*,#4393,.T.);
+#4393 = EDGE_CURVE('',#4386,#234,#4394,.T.);
+#4394 = LINE('',#4395,#4396);
+#4395 = CARTESIAN_POINT('',(-2.4875,0.375,1.25E-02));
+#4396 = VECTOR('',#4397,1.);
+#4397 = DIRECTION('',(0.,-0.,-1.));
+#4398 = ORIENTED_EDGE('',*,*,#233,.F.);
+#4399 = ORIENTED_EDGE('',*,*,#4400,.T.);
+#4400 = EDGE_CURVE('',#226,#4401,#4403,.T.);
+#4401 = VERTEX_POINT('',#4402);
+#4402 = CARTESIAN_POINT('',(-2.4875,0.625,0.2));
+#4403 = LINE('',#4404,#4405);
+#4404 = CARTESIAN_POINT('',(-2.4875,0.625,1.25E-02));
+#4405 = VECTOR('',#4406,1.);
+#4406 = DIRECTION('',(0.,0.,1.));
+#4407 = ORIENTED_EDGE('',*,*,#4408,.F.);
+#4408 = EDGE_CURVE('',#4409,#4401,#4411,.T.);
+#4409 = VERTEX_POINT('',#4410);
+#4410 = CARTESIAN_POINT('',(-2.4875,0.875,0.2));
+#4411 = LINE('',#4412,#4413);
+#4412 = CARTESIAN_POINT('',(-2.4875,1.61875,0.2));
+#4413 = VECTOR('',#4414,1.);
+#4414 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4415 = ORIENTED_EDGE('',*,*,#4416,.T.);
+#4416 = EDGE_CURVE('',#4409,#201,#4417,.T.);
+#4417 = LINE('',#4418,#4419);
+#4418 = CARTESIAN_POINT('',(-2.4875,0.875,1.25E-02));
+#4419 = VECTOR('',#4420,1.);
+#4420 = DIRECTION('',(0.,-0.,-1.));
+#4421 = ORIENTED_EDGE('',*,*,#200,.F.);
+#4422 = ORIENTED_EDGE('',*,*,#4423,.T.);
+#4423 = EDGE_CURVE('',#193,#4424,#4426,.T.);
+#4424 = VERTEX_POINT('',#4425);
+#4425 = CARTESIAN_POINT('',(-2.4875,1.125,0.2));
+#4426 = LINE('',#4427,#4428);
+#4427 = CARTESIAN_POINT('',(-2.4875,1.125,1.25E-02));
+#4428 = VECTOR('',#4429,1.);
+#4429 = DIRECTION('',(0.,0.,1.));
+#4430 = ORIENTED_EDGE('',*,*,#4431,.F.);
+#4431 = EDGE_CURVE('',#4432,#4424,#4434,.T.);
+#4432 = VERTEX_POINT('',#4433);
+#4433 = CARTESIAN_POINT('',(-2.4875,1.375,0.2));
+#4434 = LINE('',#4435,#4436);
+#4435 = CARTESIAN_POINT('',(-2.4875,1.86875,0.2));
+#4436 = VECTOR('',#4437,1.);
+#4437 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4438 = ORIENTED_EDGE('',*,*,#4439,.T.);
+#4439 = EDGE_CURVE('',#4432,#168,#4440,.T.);
+#4440 = LINE('',#4441,#4442);
+#4441 = CARTESIAN_POINT('',(-2.4875,1.375,1.25E-02));
+#4442 = VECTOR('',#4443,1.);
+#4443 = DIRECTION('',(0.,-0.,-1.));
+#4444 = ORIENTED_EDGE('',*,*,#167,.F.);
+#4445 = ORIENTED_EDGE('',*,*,#4446,.T.);
+#4446 = EDGE_CURVE('',#160,#4447,#4449,.T.);
+#4447 = VERTEX_POINT('',#4448);
+#4448 = CARTESIAN_POINT('',(-2.4875,1.625,0.2));
+#4449 = LINE('',#4450,#4451);
+#4450 = CARTESIAN_POINT('',(-2.4875,1.625,1.25E-02));
+#4451 = VECTOR('',#4452,1.);
+#4452 = DIRECTION('',(0.,0.,1.));
+#4453 = ORIENTED_EDGE('',*,*,#4454,.F.);
+#4454 = EDGE_CURVE('',#4455,#4447,#4457,.T.);
+#4455 = VERTEX_POINT('',#4456);
+#4456 = CARTESIAN_POINT('',(-2.4875,1.875,0.2));
+#4457 = LINE('',#4458,#4459);
+#4458 = CARTESIAN_POINT('',(-2.4875,2.11875,0.2));
+#4459 = VECTOR('',#4460,1.);
+#4460 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#4461 = ORIENTED_EDGE('',*,*,#4462,.T.);
+#4462 = EDGE_CURVE('',#4455,#135,#4463,.T.);
+#4463 = LINE('',#4464,#4465);
+#4464 = CARTESIAN_POINT('',(-2.4875,1.875,1.25E-02));
+#4465 = VECTOR('',#4466,1.);
+#4466 = DIRECTION('',(0.,-0.,-1.));
+#4467 = PLANE('',#4468);
+#4468 = AXIS2_PLACEMENT_3D('',#4469,#4470,#4471);
+#4469 = CARTESIAN_POINT('',(-2.4875,2.4875,2.5E-02));
+#4470 = DIRECTION('',(1.,-2.22044604925E-16,0.));
+#4471 = DIRECTION('',(0.,0.,1.));
+#4472 = ADVANCED_FACE('',(#4473),#4507,.F.);
+#4473 = FACE_BOUND('',#4474,.F.);
+#4474 = EDGE_LOOP('',(#4475,#4485,#4493,#4499,#4500,#4501));
+#4475 = ORIENTED_EDGE('',*,*,#4476,.F.);
+#4476 = EDGE_CURVE('',#4477,#4479,#4481,.T.);
+#4477 = VERTEX_POINT('',#4478);
+#4478 = CARTESIAN_POINT('',(-2.5,-1.875,0.));
+#4479 = VERTEX_POINT('',#4480);
+#4480 = CARTESIAN_POINT('',(-2.225,-1.875,0.));
+#4481 = LINE('',#4482,#4483);
+#4482 = CARTESIAN_POINT('',(-2.5,-1.875,0.));
+#4483 = VECTOR('',#4484,1.);
+#4484 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4485 = ORIENTED_EDGE('',*,*,#4486,.T.);
+#4486 = EDGE_CURVE('',#4477,#4487,#4489,.T.);
+#4487 = VERTEX_POINT('',#4488);
+#4488 = CARTESIAN_POINT('',(-2.5,-1.875,0.2));
+#4489 = LINE('',#4490,#4491);
+#4490 = CARTESIAN_POINT('',(-2.5,-1.875,0.));
+#4491 = VECTOR('',#4492,1.);
+#4492 = DIRECTION('',(0.,0.,1.));
+#4493 = ORIENTED_EDGE('',*,*,#4494,.T.);
+#4494 = EDGE_CURVE('',#4487,#4286,#4495,.T.);
+#4495 = LINE('',#4496,#4497);
+#4496 = CARTESIAN_POINT('',(-2.5,-1.875,0.2));
+#4497 = VECTOR('',#4498,1.);
+#4498 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4499 = ORIENTED_EDGE('',*,*,#4285,.F.);
+#4500 = ORIENTED_EDGE('',*,*,#390,.F.);
+#4501 = ORIENTED_EDGE('',*,*,#4502,.F.);
+#4502 = EDGE_CURVE('',#4479,#382,#4503,.T.);
+#4503 = LINE('',#4504,#4505);
+#4504 = CARTESIAN_POINT('',(-2.225,-1.875,0.));
+#4505 = VECTOR('',#4506,1.);
+#4506 = DIRECTION('',(0.,0.,1.));
+#4507 = PLANE('',#4508);
+#4508 = AXIS2_PLACEMENT_3D('',#4509,#4510,#4511);
+#4509 = CARTESIAN_POINT('',(-2.5,-1.875,0.));
+#4510 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#4511 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4512 = ADVANCED_FACE('',(#4513),#4532,.T.);
+#4513 = FACE_BOUND('',#4514,.F.);
+#4514 = EDGE_LOOP('',(#4515,#4524,#4525,#4526));
+#4515 = ORIENTED_EDGE('',*,*,#4516,.F.);
+#4516 = EDGE_CURVE('',#4479,#4517,#4519,.T.);
+#4517 = VERTEX_POINT('',#4518);
+#4518 = CARTESIAN_POINT('',(-2.225,-1.625,0.));
+#4519 = CIRCLE('',#4520,0.125);
+#4520 = AXIS2_PLACEMENT_3D('',#4521,#4522,#4523);
+#4521 = CARTESIAN_POINT('',(-2.225,-1.75,0.));
+#4522 = DIRECTION('',(0.,0.,1.));
+#4523 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4524 = ORIENTED_EDGE('',*,*,#4502,.T.);
+#4525 = ORIENTED_EDGE('',*,*,#381,.F.);
+#4526 = ORIENTED_EDGE('',*,*,#4527,.F.);
+#4527 = EDGE_CURVE('',#4517,#374,#4528,.T.);
+#4528 = LINE('',#4529,#4530);
+#4529 = CARTESIAN_POINT('',(-2.225,-1.625,0.));
+#4530 = VECTOR('',#4531,1.);
+#4531 = DIRECTION('',(0.,0.,1.));
+#4532 = CYLINDRICAL_SURFACE('',#4533,0.125);
+#4533 = AXIS2_PLACEMENT_3D('',#4534,#4535,#4536);
+#4534 = CARTESIAN_POINT('',(-2.225,-1.75,0.));
+#4535 = DIRECTION('',(0.,0.,-1.));
+#4536 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4537 = ADVANCED_FACE('',(#4538),#4565,.F.);
+#4538 = FACE_BOUND('',#4539,.F.);
+#4539 = EDGE_LOOP('',(#4540,#4548,#4549,#4550,#4551,#4559));
+#4540 = ORIENTED_EDGE('',*,*,#4541,.F.);
+#4541 = EDGE_CURVE('',#4517,#4542,#4544,.T.);
+#4542 = VERTEX_POINT('',#4543);
+#4543 = CARTESIAN_POINT('',(-2.5,-1.625,0.));
+#4544 = LINE('',#4545,#4546);
+#4545 = CARTESIAN_POINT('',(-2.225,-1.625,0.));
+#4546 = VECTOR('',#4547,1.);
+#4547 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4548 = ORIENTED_EDGE('',*,*,#4527,.T.);
+#4549 = ORIENTED_EDGE('',*,*,#373,.F.);
+#4550 = ORIENTED_EDGE('',*,*,#4301,.F.);
+#4551 = ORIENTED_EDGE('',*,*,#4552,.T.);
+#4552 = EDGE_CURVE('',#4294,#4553,#4555,.T.);
+#4553 = VERTEX_POINT('',#4554);
+#4554 = CARTESIAN_POINT('',(-2.5,-1.625,0.2));
+#4555 = LINE('',#4556,#4557);
+#4556 = CARTESIAN_POINT('',(-2.225,-1.625,0.2));
+#4557 = VECTOR('',#4558,1.);
+#4558 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4559 = ORIENTED_EDGE('',*,*,#4560,.F.);
+#4560 = EDGE_CURVE('',#4542,#4553,#4561,.T.);
+#4561 = LINE('',#4562,#4563);
+#4562 = CARTESIAN_POINT('',(-2.5,-1.625,0.));
+#4563 = VECTOR('',#4564,1.);
+#4564 = DIRECTION('',(0.,0.,1.));
+#4565 = PLANE('',#4566);
+#4566 = AXIS2_PLACEMENT_3D('',#4567,#4568,#4569);
+#4567 = CARTESIAN_POINT('',(-2.225,-1.625,0.));
+#4568 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4569 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4570 = ADVANCED_FACE('',(#4571),#4605,.F.);
+#4571 = FACE_BOUND('',#4572,.F.);
+#4572 = EDGE_LOOP('',(#4573,#4583,#4591,#4597,#4598,#4599));
+#4573 = ORIENTED_EDGE('',*,*,#4574,.F.);
+#4574 = EDGE_CURVE('',#4575,#4577,#4579,.T.);
+#4575 = VERTEX_POINT('',#4576);
+#4576 = CARTESIAN_POINT('',(-2.5,-1.375,0.));
+#4577 = VERTEX_POINT('',#4578);
+#4578 = CARTESIAN_POINT('',(-2.225,-1.375,0.));
+#4579 = LINE('',#4580,#4581);
+#4580 = CARTESIAN_POINT('',(-2.5,-1.375,0.));
+#4581 = VECTOR('',#4582,1.);
+#4582 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4583 = ORIENTED_EDGE('',*,*,#4584,.T.);
+#4584 = EDGE_CURVE('',#4575,#4585,#4587,.T.);
+#4585 = VERTEX_POINT('',#4586);
+#4586 = CARTESIAN_POINT('',(-2.5,-1.375,0.2));
+#4587 = LINE('',#4588,#4589);
+#4588 = CARTESIAN_POINT('',(-2.5,-1.375,0.));
+#4589 = VECTOR('',#4590,1.);
+#4590 = DIRECTION('',(0.,0.,1.));
+#4591 = ORIENTED_EDGE('',*,*,#4592,.T.);
+#4592 = EDGE_CURVE('',#4585,#4309,#4593,.T.);
+#4593 = LINE('',#4594,#4595);
+#4594 = CARTESIAN_POINT('',(-2.5,-1.375,0.2));
+#4595 = VECTOR('',#4596,1.);
+#4596 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4597 = ORIENTED_EDGE('',*,*,#4308,.F.);
+#4598 = ORIENTED_EDGE('',*,*,#357,.F.);
+#4599 = ORIENTED_EDGE('',*,*,#4600,.F.);
+#4600 = EDGE_CURVE('',#4577,#349,#4601,.T.);
+#4601 = LINE('',#4602,#4603);
+#4602 = CARTESIAN_POINT('',(-2.225,-1.375,0.));
+#4603 = VECTOR('',#4604,1.);
+#4604 = DIRECTION('',(0.,0.,1.));
+#4605 = PLANE('',#4606);
+#4606 = AXIS2_PLACEMENT_3D('',#4607,#4608,#4609);
+#4607 = CARTESIAN_POINT('',(-2.5,-1.375,0.));
+#4608 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#4609 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4610 = ADVANCED_FACE('',(#4611),#4630,.T.);
+#4611 = FACE_BOUND('',#4612,.F.);
+#4612 = EDGE_LOOP('',(#4613,#4622,#4623,#4624));
+#4613 = ORIENTED_EDGE('',*,*,#4614,.F.);
+#4614 = EDGE_CURVE('',#4577,#4615,#4617,.T.);
+#4615 = VERTEX_POINT('',#4616);
+#4616 = CARTESIAN_POINT('',(-2.225,-1.125,0.));
+#4617 = CIRCLE('',#4618,0.125);
+#4618 = AXIS2_PLACEMENT_3D('',#4619,#4620,#4621);
+#4619 = CARTESIAN_POINT('',(-2.225,-1.25,0.));
+#4620 = DIRECTION('',(0.,0.,1.));
+#4621 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4622 = ORIENTED_EDGE('',*,*,#4600,.T.);
+#4623 = ORIENTED_EDGE('',*,*,#348,.F.);
+#4624 = ORIENTED_EDGE('',*,*,#4625,.F.);
+#4625 = EDGE_CURVE('',#4615,#341,#4626,.T.);
+#4626 = LINE('',#4627,#4628);
+#4627 = CARTESIAN_POINT('',(-2.225,-1.125,0.));
+#4628 = VECTOR('',#4629,1.);
+#4629 = DIRECTION('',(0.,0.,1.));
+#4630 = CYLINDRICAL_SURFACE('',#4631,0.125);
+#4631 = AXIS2_PLACEMENT_3D('',#4632,#4633,#4634);
+#4632 = CARTESIAN_POINT('',(-2.225,-1.25,0.));
+#4633 = DIRECTION('',(0.,0.,-1.));
+#4634 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4635 = ADVANCED_FACE('',(#4636),#4663,.F.);
+#4636 = FACE_BOUND('',#4637,.F.);
+#4637 = EDGE_LOOP('',(#4638,#4646,#4647,#4648,#4649,#4657));
+#4638 = ORIENTED_EDGE('',*,*,#4639,.F.);
+#4639 = EDGE_CURVE('',#4615,#4640,#4642,.T.);
+#4640 = VERTEX_POINT('',#4641);
+#4641 = CARTESIAN_POINT('',(-2.5,-1.125,0.));
+#4642 = LINE('',#4643,#4644);
+#4643 = CARTESIAN_POINT('',(-2.225,-1.125,0.));
+#4644 = VECTOR('',#4645,1.);
+#4645 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4646 = ORIENTED_EDGE('',*,*,#4625,.T.);
+#4647 = ORIENTED_EDGE('',*,*,#340,.F.);
+#4648 = ORIENTED_EDGE('',*,*,#4324,.F.);
+#4649 = ORIENTED_EDGE('',*,*,#4650,.T.);
+#4650 = EDGE_CURVE('',#4317,#4651,#4653,.T.);
+#4651 = VERTEX_POINT('',#4652);
+#4652 = CARTESIAN_POINT('',(-2.5,-1.125,0.2));
+#4653 = LINE('',#4654,#4655);
+#4654 = CARTESIAN_POINT('',(-2.225,-1.125,0.2));
+#4655 = VECTOR('',#4656,1.);
+#4656 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4657 = ORIENTED_EDGE('',*,*,#4658,.F.);
+#4658 = EDGE_CURVE('',#4640,#4651,#4659,.T.);
+#4659 = LINE('',#4660,#4661);
+#4660 = CARTESIAN_POINT('',(-2.5,-1.125,0.));
+#4661 = VECTOR('',#4662,1.);
+#4662 = DIRECTION('',(0.,0.,1.));
+#4663 = PLANE('',#4664);
+#4664 = AXIS2_PLACEMENT_3D('',#4665,#4666,#4667);
+#4665 = CARTESIAN_POINT('',(-2.225,-1.125,0.));
+#4666 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4667 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4668 = ADVANCED_FACE('',(#4669),#4703,.F.);
+#4669 = FACE_BOUND('',#4670,.F.);
+#4670 = EDGE_LOOP('',(#4671,#4681,#4689,#4695,#4696,#4697));
+#4671 = ORIENTED_EDGE('',*,*,#4672,.F.);
+#4672 = EDGE_CURVE('',#4673,#4675,#4677,.T.);
+#4673 = VERTEX_POINT('',#4674);
+#4674 = CARTESIAN_POINT('',(-2.5,-0.875,0.));
+#4675 = VERTEX_POINT('',#4676);
+#4676 = CARTESIAN_POINT('',(-2.225,-0.875,0.));
+#4677 = LINE('',#4678,#4679);
+#4678 = CARTESIAN_POINT('',(-2.5,-0.875,0.));
+#4679 = VECTOR('',#4680,1.);
+#4680 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4681 = ORIENTED_EDGE('',*,*,#4682,.T.);
+#4682 = EDGE_CURVE('',#4673,#4683,#4685,.T.);
+#4683 = VERTEX_POINT('',#4684);
+#4684 = CARTESIAN_POINT('',(-2.5,-0.875,0.2));
+#4685 = LINE('',#4686,#4687);
+#4686 = CARTESIAN_POINT('',(-2.5,-0.875,0.));
+#4687 = VECTOR('',#4688,1.);
+#4688 = DIRECTION('',(0.,0.,1.));
+#4689 = ORIENTED_EDGE('',*,*,#4690,.T.);
+#4690 = EDGE_CURVE('',#4683,#4332,#4691,.T.);
+#4691 = LINE('',#4692,#4693);
+#4692 = CARTESIAN_POINT('',(-2.5,-0.875,0.2));
+#4693 = VECTOR('',#4694,1.);
+#4694 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4695 = ORIENTED_EDGE('',*,*,#4331,.F.);
+#4696 = ORIENTED_EDGE('',*,*,#324,.F.);
+#4697 = ORIENTED_EDGE('',*,*,#4698,.F.);
+#4698 = EDGE_CURVE('',#4675,#316,#4699,.T.);
+#4699 = LINE('',#4700,#4701);
+#4700 = CARTESIAN_POINT('',(-2.225,-0.875,0.));
+#4701 = VECTOR('',#4702,1.);
+#4702 = DIRECTION('',(0.,0.,1.));
+#4703 = PLANE('',#4704);
+#4704 = AXIS2_PLACEMENT_3D('',#4705,#4706,#4707);
+#4705 = CARTESIAN_POINT('',(-2.5,-0.875,0.));
+#4706 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#4707 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4708 = ADVANCED_FACE('',(#4709),#4728,.T.);
+#4709 = FACE_BOUND('',#4710,.F.);
+#4710 = EDGE_LOOP('',(#4711,#4720,#4721,#4722));
+#4711 = ORIENTED_EDGE('',*,*,#4712,.F.);
+#4712 = EDGE_CURVE('',#4675,#4713,#4715,.T.);
+#4713 = VERTEX_POINT('',#4714);
+#4714 = CARTESIAN_POINT('',(-2.225,-0.625,0.));
+#4715 = CIRCLE('',#4716,0.125);
+#4716 = AXIS2_PLACEMENT_3D('',#4717,#4718,#4719);
+#4717 = CARTESIAN_POINT('',(-2.225,-0.75,0.));
+#4718 = DIRECTION('',(0.,0.,1.));
+#4719 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4720 = ORIENTED_EDGE('',*,*,#4698,.T.);
+#4721 = ORIENTED_EDGE('',*,*,#315,.F.);
+#4722 = ORIENTED_EDGE('',*,*,#4723,.F.);
+#4723 = EDGE_CURVE('',#4713,#308,#4724,.T.);
+#4724 = LINE('',#4725,#4726);
+#4725 = CARTESIAN_POINT('',(-2.225,-0.625,0.));
+#4726 = VECTOR('',#4727,1.);
+#4727 = DIRECTION('',(0.,0.,1.));
+#4728 = CYLINDRICAL_SURFACE('',#4729,0.125);
+#4729 = AXIS2_PLACEMENT_3D('',#4730,#4731,#4732);
+#4730 = CARTESIAN_POINT('',(-2.225,-0.75,0.));
+#4731 = DIRECTION('',(0.,0.,-1.));
+#4732 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4733 = ADVANCED_FACE('',(#4734),#4761,.F.);
+#4734 = FACE_BOUND('',#4735,.F.);
+#4735 = EDGE_LOOP('',(#4736,#4744,#4745,#4746,#4747,#4755));
+#4736 = ORIENTED_EDGE('',*,*,#4737,.F.);
+#4737 = EDGE_CURVE('',#4713,#4738,#4740,.T.);
+#4738 = VERTEX_POINT('',#4739);
+#4739 = CARTESIAN_POINT('',(-2.5,-0.625,0.));
+#4740 = LINE('',#4741,#4742);
+#4741 = CARTESIAN_POINT('',(-2.225,-0.625,0.));
+#4742 = VECTOR('',#4743,1.);
+#4743 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4744 = ORIENTED_EDGE('',*,*,#4723,.T.);
+#4745 = ORIENTED_EDGE('',*,*,#307,.F.);
+#4746 = ORIENTED_EDGE('',*,*,#4347,.F.);
+#4747 = ORIENTED_EDGE('',*,*,#4748,.T.);
+#4748 = EDGE_CURVE('',#4340,#4749,#4751,.T.);
+#4749 = VERTEX_POINT('',#4750);
+#4750 = CARTESIAN_POINT('',(-2.5,-0.625,0.2));
+#4751 = LINE('',#4752,#4753);
+#4752 = CARTESIAN_POINT('',(-2.225,-0.625,0.2));
+#4753 = VECTOR('',#4754,1.);
+#4754 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4755 = ORIENTED_EDGE('',*,*,#4756,.F.);
+#4756 = EDGE_CURVE('',#4738,#4749,#4757,.T.);
+#4757 = LINE('',#4758,#4759);
+#4758 = CARTESIAN_POINT('',(-2.5,-0.625,0.));
+#4759 = VECTOR('',#4760,1.);
+#4760 = DIRECTION('',(0.,0.,1.));
+#4761 = PLANE('',#4762);
+#4762 = AXIS2_PLACEMENT_3D('',#4763,#4764,#4765);
+#4763 = CARTESIAN_POINT('',(-2.225,-0.625,0.));
+#4764 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4765 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4766 = ADVANCED_FACE('',(#4767),#4801,.F.);
+#4767 = FACE_BOUND('',#4768,.F.);
+#4768 = EDGE_LOOP('',(#4769,#4779,#4787,#4793,#4794,#4795));
+#4769 = ORIENTED_EDGE('',*,*,#4770,.F.);
+#4770 = EDGE_CURVE('',#4771,#4773,#4775,.T.);
+#4771 = VERTEX_POINT('',#4772);
+#4772 = CARTESIAN_POINT('',(-2.5,-0.375,0.));
+#4773 = VERTEX_POINT('',#4774);
+#4774 = CARTESIAN_POINT('',(-2.225,-0.375,0.));
+#4775 = LINE('',#4776,#4777);
+#4776 = CARTESIAN_POINT('',(-2.5,-0.375,0.));
+#4777 = VECTOR('',#4778,1.);
+#4778 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4779 = ORIENTED_EDGE('',*,*,#4780,.T.);
+#4780 = EDGE_CURVE('',#4771,#4781,#4783,.T.);
+#4781 = VERTEX_POINT('',#4782);
+#4782 = CARTESIAN_POINT('',(-2.5,-0.375,0.2));
+#4783 = LINE('',#4784,#4785);
+#4784 = CARTESIAN_POINT('',(-2.5,-0.375,0.));
+#4785 = VECTOR('',#4786,1.);
+#4786 = DIRECTION('',(0.,0.,1.));
+#4787 = ORIENTED_EDGE('',*,*,#4788,.T.);
+#4788 = EDGE_CURVE('',#4781,#4355,#4789,.T.);
+#4789 = LINE('',#4790,#4791);
+#4790 = CARTESIAN_POINT('',(-2.5,-0.375,0.2));
+#4791 = VECTOR('',#4792,1.);
+#4792 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4793 = ORIENTED_EDGE('',*,*,#4354,.F.);
+#4794 = ORIENTED_EDGE('',*,*,#291,.F.);
+#4795 = ORIENTED_EDGE('',*,*,#4796,.F.);
+#4796 = EDGE_CURVE('',#4773,#283,#4797,.T.);
+#4797 = LINE('',#4798,#4799);
+#4798 = CARTESIAN_POINT('',(-2.225,-0.375,0.));
+#4799 = VECTOR('',#4800,1.);
+#4800 = DIRECTION('',(0.,0.,1.));
+#4801 = PLANE('',#4802);
+#4802 = AXIS2_PLACEMENT_3D('',#4803,#4804,#4805);
+#4803 = CARTESIAN_POINT('',(-2.5,-0.375,0.));
+#4804 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#4805 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4806 = ADVANCED_FACE('',(#4807),#4826,.T.);
+#4807 = FACE_BOUND('',#4808,.F.);
+#4808 = EDGE_LOOP('',(#4809,#4818,#4819,#4820));
+#4809 = ORIENTED_EDGE('',*,*,#4810,.F.);
+#4810 = EDGE_CURVE('',#4773,#4811,#4813,.T.);
+#4811 = VERTEX_POINT('',#4812);
+#4812 = CARTESIAN_POINT('',(-2.225,-0.125,0.));
+#4813 = CIRCLE('',#4814,0.125);
+#4814 = AXIS2_PLACEMENT_3D('',#4815,#4816,#4817);
+#4815 = CARTESIAN_POINT('',(-2.225,-0.25,0.));
+#4816 = DIRECTION('',(0.,0.,1.));
+#4817 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4818 = ORIENTED_EDGE('',*,*,#4796,.T.);
+#4819 = ORIENTED_EDGE('',*,*,#282,.F.);
+#4820 = ORIENTED_EDGE('',*,*,#4821,.F.);
+#4821 = EDGE_CURVE('',#4811,#275,#4822,.T.);
+#4822 = LINE('',#4823,#4824);
+#4823 = CARTESIAN_POINT('',(-2.225,-0.125,0.));
+#4824 = VECTOR('',#4825,1.);
+#4825 = DIRECTION('',(0.,0.,1.));
+#4826 = CYLINDRICAL_SURFACE('',#4827,0.125);
+#4827 = AXIS2_PLACEMENT_3D('',#4828,#4829,#4830);
+#4828 = CARTESIAN_POINT('',(-2.225,-0.25,0.));
+#4829 = DIRECTION('',(0.,0.,-1.));
+#4830 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4831 = ADVANCED_FACE('',(#4832),#4859,.F.);
+#4832 = FACE_BOUND('',#4833,.F.);
+#4833 = EDGE_LOOP('',(#4834,#4842,#4843,#4844,#4845,#4853));
+#4834 = ORIENTED_EDGE('',*,*,#4835,.F.);
+#4835 = EDGE_CURVE('',#4811,#4836,#4838,.T.);
+#4836 = VERTEX_POINT('',#4837);
+#4837 = CARTESIAN_POINT('',(-2.5,-0.125,0.));
+#4838 = LINE('',#4839,#4840);
+#4839 = CARTESIAN_POINT('',(-2.225,-0.125,0.));
+#4840 = VECTOR('',#4841,1.);
+#4841 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4842 = ORIENTED_EDGE('',*,*,#4821,.T.);
+#4843 = ORIENTED_EDGE('',*,*,#274,.F.);
+#4844 = ORIENTED_EDGE('',*,*,#4370,.F.);
+#4845 = ORIENTED_EDGE('',*,*,#4846,.T.);
+#4846 = EDGE_CURVE('',#4363,#4847,#4849,.T.);
+#4847 = VERTEX_POINT('',#4848);
+#4848 = CARTESIAN_POINT('',(-2.5,-0.125,0.2));
+#4849 = LINE('',#4850,#4851);
+#4850 = CARTESIAN_POINT('',(-2.225,-0.125,0.2));
+#4851 = VECTOR('',#4852,1.);
+#4852 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4853 = ORIENTED_EDGE('',*,*,#4854,.F.);
+#4854 = EDGE_CURVE('',#4836,#4847,#4855,.T.);
+#4855 = LINE('',#4856,#4857);
+#4856 = CARTESIAN_POINT('',(-2.5,-0.125,0.));
+#4857 = VECTOR('',#4858,1.);
+#4858 = DIRECTION('',(0.,0.,1.));
+#4859 = PLANE('',#4860);
+#4860 = AXIS2_PLACEMENT_3D('',#4861,#4862,#4863);
+#4861 = CARTESIAN_POINT('',(-2.225,-0.125,0.));
+#4862 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4863 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4864 = ADVANCED_FACE('',(#4865),#4899,.F.);
+#4865 = FACE_BOUND('',#4866,.F.);
+#4866 = EDGE_LOOP('',(#4867,#4877,#4885,#4891,#4892,#4893));
+#4867 = ORIENTED_EDGE('',*,*,#4868,.F.);
+#4868 = EDGE_CURVE('',#4869,#4871,#4873,.T.);
+#4869 = VERTEX_POINT('',#4870);
+#4870 = CARTESIAN_POINT('',(-2.5,0.125,0.));
+#4871 = VERTEX_POINT('',#4872);
+#4872 = CARTESIAN_POINT('',(-2.225,0.125,0.));
+#4873 = LINE('',#4874,#4875);
+#4874 = CARTESIAN_POINT('',(-2.5,0.125,0.));
+#4875 = VECTOR('',#4876,1.);
+#4876 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4877 = ORIENTED_EDGE('',*,*,#4878,.T.);
+#4878 = EDGE_CURVE('',#4869,#4879,#4881,.T.);
+#4879 = VERTEX_POINT('',#4880);
+#4880 = CARTESIAN_POINT('',(-2.5,0.125,0.2));
+#4881 = LINE('',#4882,#4883);
+#4882 = CARTESIAN_POINT('',(-2.5,0.125,0.));
+#4883 = VECTOR('',#4884,1.);
+#4884 = DIRECTION('',(0.,0.,1.));
+#4885 = ORIENTED_EDGE('',*,*,#4886,.T.);
+#4886 = EDGE_CURVE('',#4879,#4378,#4887,.T.);
+#4887 = LINE('',#4888,#4889);
+#4888 = CARTESIAN_POINT('',(-2.5,0.125,0.2));
+#4889 = VECTOR('',#4890,1.);
+#4890 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4891 = ORIENTED_EDGE('',*,*,#4377,.F.);
+#4892 = ORIENTED_EDGE('',*,*,#258,.F.);
+#4893 = ORIENTED_EDGE('',*,*,#4894,.F.);
+#4894 = EDGE_CURVE('',#4871,#250,#4895,.T.);
+#4895 = LINE('',#4896,#4897);
+#4896 = CARTESIAN_POINT('',(-2.225,0.125,0.));
+#4897 = VECTOR('',#4898,1.);
+#4898 = DIRECTION('',(0.,0.,1.));
+#4899 = PLANE('',#4900);
+#4900 = AXIS2_PLACEMENT_3D('',#4901,#4902,#4903);
+#4901 = CARTESIAN_POINT('',(-2.5,0.125,0.));
+#4902 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#4903 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4904 = ADVANCED_FACE('',(#4905),#4924,.T.);
+#4905 = FACE_BOUND('',#4906,.F.);
+#4906 = EDGE_LOOP('',(#4907,#4916,#4917,#4918));
+#4907 = ORIENTED_EDGE('',*,*,#4908,.F.);
+#4908 = EDGE_CURVE('',#4871,#4909,#4911,.T.);
+#4909 = VERTEX_POINT('',#4910);
+#4910 = CARTESIAN_POINT('',(-2.225,0.375,0.));
+#4911 = CIRCLE('',#4912,0.125);
+#4912 = AXIS2_PLACEMENT_3D('',#4913,#4914,#4915);
+#4913 = CARTESIAN_POINT('',(-2.225,0.25,0.));
+#4914 = DIRECTION('',(0.,0.,1.));
+#4915 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4916 = ORIENTED_EDGE('',*,*,#4894,.T.);
+#4917 = ORIENTED_EDGE('',*,*,#249,.F.);
+#4918 = ORIENTED_EDGE('',*,*,#4919,.F.);
+#4919 = EDGE_CURVE('',#4909,#242,#4920,.T.);
+#4920 = LINE('',#4921,#4922);
+#4921 = CARTESIAN_POINT('',(-2.225,0.375,0.));
+#4922 = VECTOR('',#4923,1.);
+#4923 = DIRECTION('',(0.,0.,1.));
+#4924 = CYLINDRICAL_SURFACE('',#4925,0.125);
+#4925 = AXIS2_PLACEMENT_3D('',#4926,#4927,#4928);
+#4926 = CARTESIAN_POINT('',(-2.225,0.25,0.));
+#4927 = DIRECTION('',(0.,0.,-1.));
+#4928 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4929 = ADVANCED_FACE('',(#4930),#4957,.F.);
+#4930 = FACE_BOUND('',#4931,.F.);
+#4931 = EDGE_LOOP('',(#4932,#4940,#4941,#4942,#4943,#4951));
+#4932 = ORIENTED_EDGE('',*,*,#4933,.F.);
+#4933 = EDGE_CURVE('',#4909,#4934,#4936,.T.);
+#4934 = VERTEX_POINT('',#4935);
+#4935 = CARTESIAN_POINT('',(-2.5,0.375,0.));
+#4936 = LINE('',#4937,#4938);
+#4937 = CARTESIAN_POINT('',(-2.225,0.375,0.));
+#4938 = VECTOR('',#4939,1.);
+#4939 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4940 = ORIENTED_EDGE('',*,*,#4919,.T.);
+#4941 = ORIENTED_EDGE('',*,*,#241,.F.);
+#4942 = ORIENTED_EDGE('',*,*,#4393,.F.);
+#4943 = ORIENTED_EDGE('',*,*,#4944,.T.);
+#4944 = EDGE_CURVE('',#4386,#4945,#4947,.T.);
+#4945 = VERTEX_POINT('',#4946);
+#4946 = CARTESIAN_POINT('',(-2.5,0.375,0.2));
+#4947 = LINE('',#4948,#4949);
+#4948 = CARTESIAN_POINT('',(-2.225,0.375,0.2));
+#4949 = VECTOR('',#4950,1.);
+#4950 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4951 = ORIENTED_EDGE('',*,*,#4952,.F.);
+#4952 = EDGE_CURVE('',#4934,#4945,#4953,.T.);
+#4953 = LINE('',#4954,#4955);
+#4954 = CARTESIAN_POINT('',(-2.5,0.375,0.));
+#4955 = VECTOR('',#4956,1.);
+#4956 = DIRECTION('',(0.,0.,1.));
+#4957 = PLANE('',#4958);
+#4958 = AXIS2_PLACEMENT_3D('',#4959,#4960,#4961);
+#4959 = CARTESIAN_POINT('',(-2.225,0.375,0.));
+#4960 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#4961 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#4962 = ADVANCED_FACE('',(#4963),#4997,.F.);
+#4963 = FACE_BOUND('',#4964,.F.);
+#4964 = EDGE_LOOP('',(#4965,#4975,#4983,#4989,#4990,#4991));
+#4965 = ORIENTED_EDGE('',*,*,#4966,.F.);
+#4966 = EDGE_CURVE('',#4967,#4969,#4971,.T.);
+#4967 = VERTEX_POINT('',#4968);
+#4968 = CARTESIAN_POINT('',(-2.5,0.625,0.));
+#4969 = VERTEX_POINT('',#4970);
+#4970 = CARTESIAN_POINT('',(-2.225,0.625,0.));
+#4971 = LINE('',#4972,#4973);
+#4972 = CARTESIAN_POINT('',(-2.5,0.625,0.));
+#4973 = VECTOR('',#4974,1.);
+#4974 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4975 = ORIENTED_EDGE('',*,*,#4976,.T.);
+#4976 = EDGE_CURVE('',#4967,#4977,#4979,.T.);
+#4977 = VERTEX_POINT('',#4978);
+#4978 = CARTESIAN_POINT('',(-2.5,0.625,0.2));
+#4979 = LINE('',#4980,#4981);
+#4980 = CARTESIAN_POINT('',(-2.5,0.625,0.));
+#4981 = VECTOR('',#4982,1.);
+#4982 = DIRECTION('',(0.,0.,1.));
+#4983 = ORIENTED_EDGE('',*,*,#4984,.T.);
+#4984 = EDGE_CURVE('',#4977,#4401,#4985,.T.);
+#4985 = LINE('',#4986,#4987);
+#4986 = CARTESIAN_POINT('',(-2.5,0.625,0.2));
+#4987 = VECTOR('',#4988,1.);
+#4988 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#4989 = ORIENTED_EDGE('',*,*,#4400,.F.);
+#4990 = ORIENTED_EDGE('',*,*,#225,.F.);
+#4991 = ORIENTED_EDGE('',*,*,#4992,.F.);
+#4992 = EDGE_CURVE('',#4969,#217,#4993,.T.);
+#4993 = LINE('',#4994,#4995);
+#4994 = CARTESIAN_POINT('',(-2.225,0.625,0.));
+#4995 = VECTOR('',#4996,1.);
+#4996 = DIRECTION('',(0.,0.,1.));
+#4997 = PLANE('',#4998);
+#4998 = AXIS2_PLACEMENT_3D('',#4999,#5000,#5001);
+#4999 = CARTESIAN_POINT('',(-2.5,0.625,0.));
+#5000 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#5001 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5002 = ADVANCED_FACE('',(#5003),#5022,.T.);
+#5003 = FACE_BOUND('',#5004,.F.);
+#5004 = EDGE_LOOP('',(#5005,#5014,#5015,#5016));
+#5005 = ORIENTED_EDGE('',*,*,#5006,.F.);
+#5006 = EDGE_CURVE('',#4969,#5007,#5009,.T.);
+#5007 = VERTEX_POINT('',#5008);
+#5008 = CARTESIAN_POINT('',(-2.225,0.875,0.));
+#5009 = CIRCLE('',#5010,0.125);
+#5010 = AXIS2_PLACEMENT_3D('',#5011,#5012,#5013);
+#5011 = CARTESIAN_POINT('',(-2.225,0.75,0.));
+#5012 = DIRECTION('',(0.,0.,1.));
+#5013 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5014 = ORIENTED_EDGE('',*,*,#4992,.T.);
+#5015 = ORIENTED_EDGE('',*,*,#216,.F.);
+#5016 = ORIENTED_EDGE('',*,*,#5017,.F.);
+#5017 = EDGE_CURVE('',#5007,#209,#5018,.T.);
+#5018 = LINE('',#5019,#5020);
+#5019 = CARTESIAN_POINT('',(-2.225,0.875,0.));
+#5020 = VECTOR('',#5021,1.);
+#5021 = DIRECTION('',(0.,0.,1.));
+#5022 = CYLINDRICAL_SURFACE('',#5023,0.125);
+#5023 = AXIS2_PLACEMENT_3D('',#5024,#5025,#5026);
+#5024 = CARTESIAN_POINT('',(-2.225,0.75,0.));
+#5025 = DIRECTION('',(0.,0.,-1.));
+#5026 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5027 = ADVANCED_FACE('',(#5028),#5055,.F.);
+#5028 = FACE_BOUND('',#5029,.F.);
+#5029 = EDGE_LOOP('',(#5030,#5038,#5039,#5040,#5041,#5049));
+#5030 = ORIENTED_EDGE('',*,*,#5031,.F.);
+#5031 = EDGE_CURVE('',#5007,#5032,#5034,.T.);
+#5032 = VERTEX_POINT('',#5033);
+#5033 = CARTESIAN_POINT('',(-2.5,0.875,0.));
+#5034 = LINE('',#5035,#5036);
+#5035 = CARTESIAN_POINT('',(-2.225,0.875,0.));
+#5036 = VECTOR('',#5037,1.);
+#5037 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5038 = ORIENTED_EDGE('',*,*,#5017,.T.);
+#5039 = ORIENTED_EDGE('',*,*,#208,.F.);
+#5040 = ORIENTED_EDGE('',*,*,#4416,.F.);
+#5041 = ORIENTED_EDGE('',*,*,#5042,.T.);
+#5042 = EDGE_CURVE('',#4409,#5043,#5045,.T.);
+#5043 = VERTEX_POINT('',#5044);
+#5044 = CARTESIAN_POINT('',(-2.5,0.875,0.2));
+#5045 = LINE('',#5046,#5047);
+#5046 = CARTESIAN_POINT('',(-2.225,0.875,0.2));
+#5047 = VECTOR('',#5048,1.);
+#5048 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5049 = ORIENTED_EDGE('',*,*,#5050,.F.);
+#5050 = EDGE_CURVE('',#5032,#5043,#5051,.T.);
+#5051 = LINE('',#5052,#5053);
+#5052 = CARTESIAN_POINT('',(-2.5,0.875,0.));
+#5053 = VECTOR('',#5054,1.);
+#5054 = DIRECTION('',(0.,0.,1.));
+#5055 = PLANE('',#5056);
+#5056 = AXIS2_PLACEMENT_3D('',#5057,#5058,#5059);
+#5057 = CARTESIAN_POINT('',(-2.225,0.875,0.));
+#5058 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5059 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5060 = ADVANCED_FACE('',(#5061),#5095,.F.);
+#5061 = FACE_BOUND('',#5062,.F.);
+#5062 = EDGE_LOOP('',(#5063,#5073,#5081,#5087,#5088,#5089));
+#5063 = ORIENTED_EDGE('',*,*,#5064,.F.);
+#5064 = EDGE_CURVE('',#5065,#5067,#5069,.T.);
+#5065 = VERTEX_POINT('',#5066);
+#5066 = CARTESIAN_POINT('',(-2.5,1.125,0.));
+#5067 = VERTEX_POINT('',#5068);
+#5068 = CARTESIAN_POINT('',(-2.225,1.125,0.));
+#5069 = LINE('',#5070,#5071);
+#5070 = CARTESIAN_POINT('',(-2.5,1.125,0.));
+#5071 = VECTOR('',#5072,1.);
+#5072 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5073 = ORIENTED_EDGE('',*,*,#5074,.T.);
+#5074 = EDGE_CURVE('',#5065,#5075,#5077,.T.);
+#5075 = VERTEX_POINT('',#5076);
+#5076 = CARTESIAN_POINT('',(-2.5,1.125,0.2));
+#5077 = LINE('',#5078,#5079);
+#5078 = CARTESIAN_POINT('',(-2.5,1.125,0.));
+#5079 = VECTOR('',#5080,1.);
+#5080 = DIRECTION('',(0.,0.,1.));
+#5081 = ORIENTED_EDGE('',*,*,#5082,.T.);
+#5082 = EDGE_CURVE('',#5075,#4424,#5083,.T.);
+#5083 = LINE('',#5084,#5085);
+#5084 = CARTESIAN_POINT('',(-2.5,1.125,0.2));
+#5085 = VECTOR('',#5086,1.);
+#5086 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5087 = ORIENTED_EDGE('',*,*,#4423,.F.);
+#5088 = ORIENTED_EDGE('',*,*,#192,.F.);
+#5089 = ORIENTED_EDGE('',*,*,#5090,.F.);
+#5090 = EDGE_CURVE('',#5067,#184,#5091,.T.);
+#5091 = LINE('',#5092,#5093);
+#5092 = CARTESIAN_POINT('',(-2.225,1.125,0.));
+#5093 = VECTOR('',#5094,1.);
+#5094 = DIRECTION('',(0.,0.,1.));
+#5095 = PLANE('',#5096);
+#5096 = AXIS2_PLACEMENT_3D('',#5097,#5098,#5099);
+#5097 = CARTESIAN_POINT('',(-2.5,1.125,0.));
+#5098 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#5099 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5100 = ADVANCED_FACE('',(#5101),#5120,.T.);
+#5101 = FACE_BOUND('',#5102,.F.);
+#5102 = EDGE_LOOP('',(#5103,#5112,#5113,#5114));
+#5103 = ORIENTED_EDGE('',*,*,#5104,.F.);
+#5104 = EDGE_CURVE('',#5067,#5105,#5107,.T.);
+#5105 = VERTEX_POINT('',#5106);
+#5106 = CARTESIAN_POINT('',(-2.225,1.375,0.));
+#5107 = CIRCLE('',#5108,0.125);
+#5108 = AXIS2_PLACEMENT_3D('',#5109,#5110,#5111);
+#5109 = CARTESIAN_POINT('',(-2.225,1.25,0.));
+#5110 = DIRECTION('',(0.,0.,1.));
+#5111 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5112 = ORIENTED_EDGE('',*,*,#5090,.T.);
+#5113 = ORIENTED_EDGE('',*,*,#183,.F.);
+#5114 = ORIENTED_EDGE('',*,*,#5115,.F.);
+#5115 = EDGE_CURVE('',#5105,#176,#5116,.T.);
+#5116 = LINE('',#5117,#5118);
+#5117 = CARTESIAN_POINT('',(-2.225,1.375,0.));
+#5118 = VECTOR('',#5119,1.);
+#5119 = DIRECTION('',(0.,0.,1.));
+#5120 = CYLINDRICAL_SURFACE('',#5121,0.125);
+#5121 = AXIS2_PLACEMENT_3D('',#5122,#5123,#5124);
+#5122 = CARTESIAN_POINT('',(-2.225,1.25,0.));
+#5123 = DIRECTION('',(0.,0.,-1.));
+#5124 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5125 = ADVANCED_FACE('',(#5126),#5153,.F.);
+#5126 = FACE_BOUND('',#5127,.F.);
+#5127 = EDGE_LOOP('',(#5128,#5136,#5137,#5138,#5139,#5147));
+#5128 = ORIENTED_EDGE('',*,*,#5129,.F.);
+#5129 = EDGE_CURVE('',#5105,#5130,#5132,.T.);
+#5130 = VERTEX_POINT('',#5131);
+#5131 = CARTESIAN_POINT('',(-2.5,1.375,0.));
+#5132 = LINE('',#5133,#5134);
+#5133 = CARTESIAN_POINT('',(-2.225,1.375,0.));
+#5134 = VECTOR('',#5135,1.);
+#5135 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5136 = ORIENTED_EDGE('',*,*,#5115,.T.);
+#5137 = ORIENTED_EDGE('',*,*,#175,.F.);
+#5138 = ORIENTED_EDGE('',*,*,#4439,.F.);
+#5139 = ORIENTED_EDGE('',*,*,#5140,.T.);
+#5140 = EDGE_CURVE('',#4432,#5141,#5143,.T.);
+#5141 = VERTEX_POINT('',#5142);
+#5142 = CARTESIAN_POINT('',(-2.5,1.375,0.2));
+#5143 = LINE('',#5144,#5145);
+#5144 = CARTESIAN_POINT('',(-2.225,1.375,0.2));
+#5145 = VECTOR('',#5146,1.);
+#5146 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5147 = ORIENTED_EDGE('',*,*,#5148,.F.);
+#5148 = EDGE_CURVE('',#5130,#5141,#5149,.T.);
+#5149 = LINE('',#5150,#5151);
+#5150 = CARTESIAN_POINT('',(-2.5,1.375,0.));
+#5151 = VECTOR('',#5152,1.);
+#5152 = DIRECTION('',(0.,0.,1.));
+#5153 = PLANE('',#5154);
+#5154 = AXIS2_PLACEMENT_3D('',#5155,#5156,#5157);
+#5155 = CARTESIAN_POINT('',(-2.225,1.375,0.));
+#5156 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5157 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5158 = ADVANCED_FACE('',(#5159),#5193,.F.);
+#5159 = FACE_BOUND('',#5160,.F.);
+#5160 = EDGE_LOOP('',(#5161,#5171,#5179,#5185,#5186,#5187));
+#5161 = ORIENTED_EDGE('',*,*,#5162,.F.);
+#5162 = EDGE_CURVE('',#5163,#5165,#5167,.T.);
+#5163 = VERTEX_POINT('',#5164);
+#5164 = CARTESIAN_POINT('',(-2.5,1.625,0.));
+#5165 = VERTEX_POINT('',#5166);
+#5166 = CARTESIAN_POINT('',(-2.225,1.625,0.));
+#5167 = LINE('',#5168,#5169);
+#5168 = CARTESIAN_POINT('',(-2.5,1.625,0.));
+#5169 = VECTOR('',#5170,1.);
+#5170 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5171 = ORIENTED_EDGE('',*,*,#5172,.T.);
+#5172 = EDGE_CURVE('',#5163,#5173,#5175,.T.);
+#5173 = VERTEX_POINT('',#5174);
+#5174 = CARTESIAN_POINT('',(-2.5,1.625,0.2));
+#5175 = LINE('',#5176,#5177);
+#5176 = CARTESIAN_POINT('',(-2.5,1.625,0.));
+#5177 = VECTOR('',#5178,1.);
+#5178 = DIRECTION('',(0.,0.,1.));
+#5179 = ORIENTED_EDGE('',*,*,#5180,.T.);
+#5180 = EDGE_CURVE('',#5173,#4447,#5181,.T.);
+#5181 = LINE('',#5182,#5183);
+#5182 = CARTESIAN_POINT('',(-2.5,1.625,0.2));
+#5183 = VECTOR('',#5184,1.);
+#5184 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5185 = ORIENTED_EDGE('',*,*,#4446,.F.);
+#5186 = ORIENTED_EDGE('',*,*,#159,.F.);
+#5187 = ORIENTED_EDGE('',*,*,#5188,.F.);
+#5188 = EDGE_CURVE('',#5165,#151,#5189,.T.);
+#5189 = LINE('',#5190,#5191);
+#5190 = CARTESIAN_POINT('',(-2.225,1.625,0.));
+#5191 = VECTOR('',#5192,1.);
+#5192 = DIRECTION('',(0.,0.,1.));
+#5193 = PLANE('',#5194);
+#5194 = AXIS2_PLACEMENT_3D('',#5195,#5196,#5197);
+#5195 = CARTESIAN_POINT('',(-2.5,1.625,0.));
+#5196 = DIRECTION('',(4.669739647545E-16,1.,0.));
+#5197 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#5198 = ADVANCED_FACE('',(#5199),#5218,.T.);
+#5199 = FACE_BOUND('',#5200,.F.);
+#5200 = EDGE_LOOP('',(#5201,#5210,#5211,#5212));
+#5201 = ORIENTED_EDGE('',*,*,#5202,.F.);
+#5202 = EDGE_CURVE('',#5165,#5203,#5205,.T.);
+#5203 = VERTEX_POINT('',#5204);
+#5204 = CARTESIAN_POINT('',(-2.225,1.875,0.));
+#5205 = CIRCLE('',#5206,0.125);
+#5206 = AXIS2_PLACEMENT_3D('',#5207,#5208,#5209);
+#5207 = CARTESIAN_POINT('',(-2.225,1.75,0.));
+#5208 = DIRECTION('',(0.,0.,1.));
+#5209 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5210 = ORIENTED_EDGE('',*,*,#5188,.T.);
+#5211 = ORIENTED_EDGE('',*,*,#150,.F.);
+#5212 = ORIENTED_EDGE('',*,*,#5213,.F.);
+#5213 = EDGE_CURVE('',#5203,#143,#5214,.T.);
+#5214 = LINE('',#5215,#5216);
+#5215 = CARTESIAN_POINT('',(-2.225,1.875,0.));
+#5216 = VECTOR('',#5217,1.);
+#5217 = DIRECTION('',(0.,0.,1.));
+#5218 = CYLINDRICAL_SURFACE('',#5219,0.125);
+#5219 = AXIS2_PLACEMENT_3D('',#5220,#5221,#5222);
+#5220 = CARTESIAN_POINT('',(-2.225,1.75,0.));
+#5221 = DIRECTION('',(0.,0.,-1.));
+#5222 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5223 = ADVANCED_FACE('',(#5224),#5251,.F.);
+#5224 = FACE_BOUND('',#5225,.F.);
+#5225 = EDGE_LOOP('',(#5226,#5234,#5235,#5236,#5237,#5245));
+#5226 = ORIENTED_EDGE('',*,*,#5227,.F.);
+#5227 = EDGE_CURVE('',#5203,#5228,#5230,.T.);
+#5228 = VERTEX_POINT('',#5229);
+#5229 = CARTESIAN_POINT('',(-2.5,1.875,0.));
+#5230 = LINE('',#5231,#5232);
+#5231 = CARTESIAN_POINT('',(-2.225,1.875,0.));
+#5232 = VECTOR('',#5233,1.);
+#5233 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5234 = ORIENTED_EDGE('',*,*,#5213,.T.);
+#5235 = ORIENTED_EDGE('',*,*,#142,.F.);
+#5236 = ORIENTED_EDGE('',*,*,#4462,.F.);
+#5237 = ORIENTED_EDGE('',*,*,#5238,.T.);
+#5238 = EDGE_CURVE('',#4455,#5239,#5241,.T.);
+#5239 = VERTEX_POINT('',#5240);
+#5240 = CARTESIAN_POINT('',(-2.5,1.875,0.2));
+#5241 = LINE('',#5242,#5243);
+#5242 = CARTESIAN_POINT('',(-2.225,1.875,0.2));
+#5243 = VECTOR('',#5244,1.);
+#5244 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5245 = ORIENTED_EDGE('',*,*,#5246,.F.);
+#5246 = EDGE_CURVE('',#5228,#5239,#5247,.T.);
+#5247 = LINE('',#5248,#5249);
+#5248 = CARTESIAN_POINT('',(-2.5,1.875,0.));
+#5249 = VECTOR('',#5250,1.);
+#5250 = DIRECTION('',(0.,0.,1.));
+#5251 = PLANE('',#5252);
+#5252 = AXIS2_PLACEMENT_3D('',#5253,#5254,#5255);
+#5253 = CARTESIAN_POINT('',(-2.225,1.875,0.));
+#5254 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#5255 = DIRECTION('',(-1.,4.669739647545E-16,0.));
+#5256 = ADVANCED_FACE('',(#5257,#5263),#5274,.T.);
+#5257 = FACE_BOUND('',#5258,.T.);
+#5258 = EDGE_LOOP('',(#5259,#5260,#5261,#5262));
+#5259 = ORIENTED_EDGE('',*,*,#1292,.F.);
+#5260 = ORIENTED_EDGE('',*,*,#4277,.T.);
+#5261 = ORIENTED_EDGE('',*,*,#3283,.T.);
+#5262 = ORIENTED_EDGE('',*,*,#2293,.F.);
+#5263 = FACE_BOUND('',#5264,.T.);
+#5264 = EDGE_LOOP('',(#5265));
+#5265 = ORIENTED_EDGE('',*,*,#5266,.T.);
+#5266 = EDGE_CURVE('',#5267,#5267,#5269,.T.);
+#5267 = VERTEX_POINT('',#5268);
+#5268 = CARTESIAN_POINT('',(-1.9,1.65,0.875));
+#5269 = CIRCLE('',#5270,0.25);
+#5270 = AXIS2_PLACEMENT_3D('',#5271,#5272,#5273);
+#5271 = CARTESIAN_POINT('',(-1.9,1.9,0.875));
+#5272 = DIRECTION('',(0.,-0.,-1.));
+#5273 = DIRECTION('',(6.661338147751E-16,-1.,0.));
+#5274 = PLANE('',#5275);
+#5275 = AXIS2_PLACEMENT_3D('',#5276,#5277,#5278);
+#5276 = CARTESIAN_POINT('',(-2.4875,2.4875,0.875));
+#5277 = DIRECTION('',(0.,0.,1.));
+#5278 = DIRECTION('',(-2.22044604925E-16,-1.,0.));
+#5279 = ADVANCED_FACE('',(#5280),#5291,.T.);
+#5280 = FACE_BOUND('',#5281,.T.);
+#5281 = EDGE_LOOP('',(#5282,#5288,#5289,#5290));
+#5282 = ORIENTED_EDGE('',*,*,#5283,.T.);
+#5283 = EDGE_CURVE('',#2270,#2204,#5284,.T.);
+#5284 = LINE('',#5285,#5286);
+#5285 = CARTESIAN_POINT('',(1.875,2.5,0.2));
+#5286 = VECTOR('',#5287,1.);
+#5287 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5288 = ORIENTED_EDGE('',*,*,#2211,.T.);
+#5289 = ORIENTED_EDGE('',*,*,#1478,.F.);
+#5290 = ORIENTED_EDGE('',*,*,#2269,.T.);
+#5291 = PLANE('',#5292);
+#5292 = AXIS2_PLACEMENT_3D('',#5293,#5294,#5295);
+#5293 = CARTESIAN_POINT('',(1.75,2.324839749899,0.2));
+#5294 = DIRECTION('',(0.,0.,1.));
+#5295 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5296 = ADVANCED_FACE('',(#5297),#5308,.T.);
+#5297 = FACE_BOUND('',#5298,.T.);
+#5298 = EDGE_LOOP('',(#5299,#5305,#5306,#5307));
+#5299 = ORIENTED_EDGE('',*,*,#5300,.T.);
+#5300 = EDGE_CURVE('',#2172,#2106,#5301,.T.);
+#5301 = LINE('',#5302,#5303);
+#5302 = CARTESIAN_POINT('',(1.375,2.5,0.2));
+#5303 = VECTOR('',#5304,1.);
+#5304 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5305 = ORIENTED_EDGE('',*,*,#2113,.T.);
+#5306 = ORIENTED_EDGE('',*,*,#1455,.F.);
+#5307 = ORIENTED_EDGE('',*,*,#2171,.T.);
+#5308 = PLANE('',#5309);
+#5309 = AXIS2_PLACEMENT_3D('',#5310,#5311,#5312);
+#5310 = CARTESIAN_POINT('',(1.25,2.324839749899,0.2));
+#5311 = DIRECTION('',(0.,0.,1.));
+#5312 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5313 = ADVANCED_FACE('',(#5314),#5325,.T.);
+#5314 = FACE_BOUND('',#5315,.T.);
+#5315 = EDGE_LOOP('',(#5316,#5322,#5323,#5324));
+#5316 = ORIENTED_EDGE('',*,*,#5317,.T.);
+#5317 = EDGE_CURVE('',#2074,#2008,#5318,.T.);
+#5318 = LINE('',#5319,#5320);
+#5319 = CARTESIAN_POINT('',(0.875,2.5,0.2));
+#5320 = VECTOR('',#5321,1.);
+#5321 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5322 = ORIENTED_EDGE('',*,*,#2015,.T.);
+#5323 = ORIENTED_EDGE('',*,*,#1432,.F.);
+#5324 = ORIENTED_EDGE('',*,*,#2073,.T.);
+#5325 = PLANE('',#5326);
+#5326 = AXIS2_PLACEMENT_3D('',#5327,#5328,#5329);
+#5327 = CARTESIAN_POINT('',(0.75,2.324839749899,0.2));
+#5328 = DIRECTION('',(0.,0.,1.));
+#5329 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5330 = ADVANCED_FACE('',(#5331),#5342,.T.);
+#5331 = FACE_BOUND('',#5332,.T.);
+#5332 = EDGE_LOOP('',(#5333,#5339,#5340,#5341));
+#5333 = ORIENTED_EDGE('',*,*,#5334,.T.);
+#5334 = EDGE_CURVE('',#1976,#1910,#5335,.T.);
+#5335 = LINE('',#5336,#5337);
+#5336 = CARTESIAN_POINT('',(0.375,2.5,0.2));
+#5337 = VECTOR('',#5338,1.);
+#5338 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5339 = ORIENTED_EDGE('',*,*,#1917,.T.);
+#5340 = ORIENTED_EDGE('',*,*,#1409,.F.);
+#5341 = ORIENTED_EDGE('',*,*,#1975,.T.);
+#5342 = PLANE('',#5343);
+#5343 = AXIS2_PLACEMENT_3D('',#5344,#5345,#5346);
+#5344 = CARTESIAN_POINT('',(0.25,2.324839749899,0.2));
+#5345 = DIRECTION('',(0.,0.,1.));
+#5346 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5347 = ADVANCED_FACE('',(#5348),#5359,.T.);
+#5348 = FACE_BOUND('',#5349,.T.);
+#5349 = EDGE_LOOP('',(#5350,#5356,#5357,#5358));
+#5350 = ORIENTED_EDGE('',*,*,#5351,.T.);
+#5351 = EDGE_CURVE('',#1878,#1812,#5352,.T.);
+#5352 = LINE('',#5353,#5354);
+#5353 = CARTESIAN_POINT('',(-0.125,2.5,0.2));
+#5354 = VECTOR('',#5355,1.);
+#5355 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5356 = ORIENTED_EDGE('',*,*,#1819,.T.);
+#5357 = ORIENTED_EDGE('',*,*,#1386,.F.);
+#5358 = ORIENTED_EDGE('',*,*,#1877,.T.);
+#5359 = PLANE('',#5360);
+#5360 = AXIS2_PLACEMENT_3D('',#5361,#5362,#5363);
+#5361 = CARTESIAN_POINT('',(-0.25,2.324839749899,0.2));
+#5362 = DIRECTION('',(0.,0.,1.));
+#5363 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5364 = ADVANCED_FACE('',(#5365),#5376,.T.);
+#5365 = FACE_BOUND('',#5366,.T.);
+#5366 = EDGE_LOOP('',(#5367,#5373,#5374,#5375));
+#5367 = ORIENTED_EDGE('',*,*,#5368,.T.);
+#5368 = EDGE_CURVE('',#1780,#1714,#5369,.T.);
+#5369 = LINE('',#5370,#5371);
+#5370 = CARTESIAN_POINT('',(-0.625,2.5,0.2));
+#5371 = VECTOR('',#5372,1.);
+#5372 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5373 = ORIENTED_EDGE('',*,*,#1721,.T.);
+#5374 = ORIENTED_EDGE('',*,*,#1363,.F.);
+#5375 = ORIENTED_EDGE('',*,*,#1779,.T.);
+#5376 = PLANE('',#5377);
+#5377 = AXIS2_PLACEMENT_3D('',#5378,#5379,#5380);
+#5378 = CARTESIAN_POINT('',(-0.75,2.324839749899,0.2));
+#5379 = DIRECTION('',(0.,0.,1.));
+#5380 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5381 = ADVANCED_FACE('',(#5382),#5393,.T.);
+#5382 = FACE_BOUND('',#5383,.T.);
+#5383 = EDGE_LOOP('',(#5384,#5390,#5391,#5392));
+#5384 = ORIENTED_EDGE('',*,*,#5385,.T.);
+#5385 = EDGE_CURVE('',#1682,#1616,#5386,.T.);
+#5386 = LINE('',#5387,#5388);
+#5387 = CARTESIAN_POINT('',(-1.125,2.5,0.2));
+#5388 = VECTOR('',#5389,1.);
+#5389 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5390 = ORIENTED_EDGE('',*,*,#1623,.T.);
+#5391 = ORIENTED_EDGE('',*,*,#1340,.F.);
+#5392 = ORIENTED_EDGE('',*,*,#1681,.T.);
+#5393 = PLANE('',#5394);
+#5394 = AXIS2_PLACEMENT_3D('',#5395,#5396,#5397);
+#5395 = CARTESIAN_POINT('',(-1.25,2.324839749899,0.2));
+#5396 = DIRECTION('',(0.,0.,1.));
+#5397 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5398 = ADVANCED_FACE('',(#5399),#5410,.T.);
+#5399 = FACE_BOUND('',#5400,.T.);
+#5400 = EDGE_LOOP('',(#5401,#5407,#5408,#5409));
+#5401 = ORIENTED_EDGE('',*,*,#5402,.T.);
+#5402 = EDGE_CURVE('',#1584,#1518,#5403,.T.);
+#5403 = LINE('',#5404,#5405);
+#5404 = CARTESIAN_POINT('',(-1.625,2.5,0.2));
+#5405 = VECTOR('',#5406,1.);
+#5406 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5407 = ORIENTED_EDGE('',*,*,#1525,.T.);
+#5408 = ORIENTED_EDGE('',*,*,#1317,.F.);
+#5409 = ORIENTED_EDGE('',*,*,#1583,.T.);
+#5410 = PLANE('',#5411);
+#5411 = AXIS2_PLACEMENT_3D('',#5412,#5413,#5414);
+#5412 = CARTESIAN_POINT('',(-1.75,2.324839749899,0.2));
+#5413 = DIRECTION('',(0.,0.,1.));
+#5414 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5415 = ADVANCED_FACE('',(#5416),#5427,.F.);
+#5416 = FACE_BOUND('',#5417,.F.);
+#5417 = EDGE_LOOP('',(#5418,#5419,#5420,#5421));
+#5418 = ORIENTED_EDGE('',*,*,#1507,.T.);
+#5419 = ORIENTED_EDGE('',*,*,#1547,.T.);
+#5420 = ORIENTED_EDGE('',*,*,#1572,.T.);
+#5421 = ORIENTED_EDGE('',*,*,#5422,.T.);
+#5422 = EDGE_CURVE('',#1573,#1508,#5423,.T.);
+#5423 = LINE('',#5424,#5425);
+#5424 = CARTESIAN_POINT('',(-1.625,2.5,0.));
+#5425 = VECTOR('',#5426,1.);
+#5426 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5427 = PLANE('',#5428);
+#5428 = AXIS2_PLACEMENT_3D('',#5429,#5430,#5431);
+#5429 = CARTESIAN_POINT('',(-1.75,2.324839749899,0.));
+#5430 = DIRECTION('',(0.,0.,1.));
+#5431 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5432 = ADVANCED_FACE('',(#5433),#5439,.F.);
+#5433 = FACE_BOUND('',#5434,.F.);
+#5434 = EDGE_LOOP('',(#5435,#5436,#5437,#5438));
+#5435 = ORIENTED_EDGE('',*,*,#1591,.T.);
+#5436 = ORIENTED_EDGE('',*,*,#5402,.T.);
+#5437 = ORIENTED_EDGE('',*,*,#1517,.F.);
+#5438 = ORIENTED_EDGE('',*,*,#5422,.F.);
+#5439 = PLANE('',#5440);
+#5440 = AXIS2_PLACEMENT_3D('',#5441,#5442,#5443);
+#5441 = CARTESIAN_POINT('',(-1.625,2.5,0.));
+#5442 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5443 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5444 = ADVANCED_FACE('',(#5445),#5456,.F.);
+#5445 = FACE_BOUND('',#5446,.F.);
+#5446 = EDGE_LOOP('',(#5447,#5448,#5449,#5450));
+#5447 = ORIENTED_EDGE('',*,*,#1605,.T.);
+#5448 = ORIENTED_EDGE('',*,*,#1645,.T.);
+#5449 = ORIENTED_EDGE('',*,*,#1670,.T.);
+#5450 = ORIENTED_EDGE('',*,*,#5451,.T.);
+#5451 = EDGE_CURVE('',#1671,#1606,#5452,.T.);
+#5452 = LINE('',#5453,#5454);
+#5453 = CARTESIAN_POINT('',(-1.125,2.5,0.));
+#5454 = VECTOR('',#5455,1.);
+#5455 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5456 = PLANE('',#5457);
+#5457 = AXIS2_PLACEMENT_3D('',#5458,#5459,#5460);
+#5458 = CARTESIAN_POINT('',(-1.25,2.324839749899,0.));
+#5459 = DIRECTION('',(0.,0.,1.));
+#5460 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5461 = ADVANCED_FACE('',(#5462),#5468,.F.);
+#5462 = FACE_BOUND('',#5463,.F.);
+#5463 = EDGE_LOOP('',(#5464,#5465,#5466,#5467));
+#5464 = ORIENTED_EDGE('',*,*,#1689,.T.);
+#5465 = ORIENTED_EDGE('',*,*,#5385,.T.);
+#5466 = ORIENTED_EDGE('',*,*,#1615,.F.);
+#5467 = ORIENTED_EDGE('',*,*,#5451,.F.);
+#5468 = PLANE('',#5469);
+#5469 = AXIS2_PLACEMENT_3D('',#5470,#5471,#5472);
+#5470 = CARTESIAN_POINT('',(-1.125,2.5,0.));
+#5471 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5472 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5473 = ADVANCED_FACE('',(#5474),#5485,.F.);
+#5474 = FACE_BOUND('',#5475,.F.);
+#5475 = EDGE_LOOP('',(#5476,#5477,#5478,#5479));
+#5476 = ORIENTED_EDGE('',*,*,#1703,.T.);
+#5477 = ORIENTED_EDGE('',*,*,#1743,.T.);
+#5478 = ORIENTED_EDGE('',*,*,#1768,.T.);
+#5479 = ORIENTED_EDGE('',*,*,#5480,.T.);
+#5480 = EDGE_CURVE('',#1769,#1704,#5481,.T.);
+#5481 = LINE('',#5482,#5483);
+#5482 = CARTESIAN_POINT('',(-0.625,2.5,0.));
+#5483 = VECTOR('',#5484,1.);
+#5484 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5485 = PLANE('',#5486);
+#5486 = AXIS2_PLACEMENT_3D('',#5487,#5488,#5489);
+#5487 = CARTESIAN_POINT('',(-0.75,2.324839749899,0.));
+#5488 = DIRECTION('',(0.,0.,1.));
+#5489 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5490 = ADVANCED_FACE('',(#5491),#5497,.F.);
+#5491 = FACE_BOUND('',#5492,.F.);
+#5492 = EDGE_LOOP('',(#5493,#5494,#5495,#5496));
+#5493 = ORIENTED_EDGE('',*,*,#1787,.T.);
+#5494 = ORIENTED_EDGE('',*,*,#5368,.T.);
+#5495 = ORIENTED_EDGE('',*,*,#1713,.F.);
+#5496 = ORIENTED_EDGE('',*,*,#5480,.F.);
+#5497 = PLANE('',#5498);
+#5498 = AXIS2_PLACEMENT_3D('',#5499,#5500,#5501);
+#5499 = CARTESIAN_POINT('',(-0.625,2.5,0.));
+#5500 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5501 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5502 = ADVANCED_FACE('',(#5503),#5514,.F.);
+#5503 = FACE_BOUND('',#5504,.F.);
+#5504 = EDGE_LOOP('',(#5505,#5506,#5507,#5508));
+#5505 = ORIENTED_EDGE('',*,*,#1801,.T.);
+#5506 = ORIENTED_EDGE('',*,*,#1841,.T.);
+#5507 = ORIENTED_EDGE('',*,*,#1866,.T.);
+#5508 = ORIENTED_EDGE('',*,*,#5509,.T.);
+#5509 = EDGE_CURVE('',#1867,#1802,#5510,.T.);
+#5510 = LINE('',#5511,#5512);
+#5511 = CARTESIAN_POINT('',(-0.125,2.5,0.));
+#5512 = VECTOR('',#5513,1.);
+#5513 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5514 = PLANE('',#5515);
+#5515 = AXIS2_PLACEMENT_3D('',#5516,#5517,#5518);
+#5516 = CARTESIAN_POINT('',(-0.25,2.324839749899,0.));
+#5517 = DIRECTION('',(0.,0.,1.));
+#5518 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5519 = ADVANCED_FACE('',(#5520),#5526,.F.);
+#5520 = FACE_BOUND('',#5521,.F.);
+#5521 = EDGE_LOOP('',(#5522,#5523,#5524,#5525));
+#5522 = ORIENTED_EDGE('',*,*,#1885,.T.);
+#5523 = ORIENTED_EDGE('',*,*,#5351,.T.);
+#5524 = ORIENTED_EDGE('',*,*,#1811,.F.);
+#5525 = ORIENTED_EDGE('',*,*,#5509,.F.);
+#5526 = PLANE('',#5527);
+#5527 = AXIS2_PLACEMENT_3D('',#5528,#5529,#5530);
+#5528 = CARTESIAN_POINT('',(-0.125,2.5,0.));
+#5529 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5530 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5531 = ADVANCED_FACE('',(#5532),#5543,.F.);
+#5532 = FACE_BOUND('',#5533,.F.);
+#5533 = EDGE_LOOP('',(#5534,#5535,#5536,#5537));
+#5534 = ORIENTED_EDGE('',*,*,#1899,.T.);
+#5535 = ORIENTED_EDGE('',*,*,#1939,.T.);
+#5536 = ORIENTED_EDGE('',*,*,#1964,.T.);
+#5537 = ORIENTED_EDGE('',*,*,#5538,.T.);
+#5538 = EDGE_CURVE('',#1965,#1900,#5539,.T.);
+#5539 = LINE('',#5540,#5541);
+#5540 = CARTESIAN_POINT('',(0.375,2.5,0.));
+#5541 = VECTOR('',#5542,1.);
+#5542 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5543 = PLANE('',#5544);
+#5544 = AXIS2_PLACEMENT_3D('',#5545,#5546,#5547);
+#5545 = CARTESIAN_POINT('',(0.25,2.324839749899,0.));
+#5546 = DIRECTION('',(0.,0.,1.));
+#5547 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5548 = ADVANCED_FACE('',(#5549),#5555,.F.);
+#5549 = FACE_BOUND('',#5550,.F.);
+#5550 = EDGE_LOOP('',(#5551,#5552,#5553,#5554));
+#5551 = ORIENTED_EDGE('',*,*,#1983,.T.);
+#5552 = ORIENTED_EDGE('',*,*,#5334,.T.);
+#5553 = ORIENTED_EDGE('',*,*,#1909,.F.);
+#5554 = ORIENTED_EDGE('',*,*,#5538,.F.);
+#5555 = PLANE('',#5556);
+#5556 = AXIS2_PLACEMENT_3D('',#5557,#5558,#5559);
+#5557 = CARTESIAN_POINT('',(0.375,2.5,0.));
+#5558 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5559 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5560 = ADVANCED_FACE('',(#5561),#5572,.F.);
+#5561 = FACE_BOUND('',#5562,.F.);
+#5562 = EDGE_LOOP('',(#5563,#5564,#5565,#5566));
+#5563 = ORIENTED_EDGE('',*,*,#1997,.T.);
+#5564 = ORIENTED_EDGE('',*,*,#2037,.T.);
+#5565 = ORIENTED_EDGE('',*,*,#2062,.T.);
+#5566 = ORIENTED_EDGE('',*,*,#5567,.T.);
+#5567 = EDGE_CURVE('',#2063,#1998,#5568,.T.);
+#5568 = LINE('',#5569,#5570);
+#5569 = CARTESIAN_POINT('',(0.875,2.5,0.));
+#5570 = VECTOR('',#5571,1.);
+#5571 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5572 = PLANE('',#5573);
+#5573 = AXIS2_PLACEMENT_3D('',#5574,#5575,#5576);
+#5574 = CARTESIAN_POINT('',(0.75,2.324839749899,0.));
+#5575 = DIRECTION('',(0.,0.,1.));
+#5576 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5577 = ADVANCED_FACE('',(#5578),#5584,.F.);
+#5578 = FACE_BOUND('',#5579,.F.);
+#5579 = EDGE_LOOP('',(#5580,#5581,#5582,#5583));
+#5580 = ORIENTED_EDGE('',*,*,#2081,.T.);
+#5581 = ORIENTED_EDGE('',*,*,#5317,.T.);
+#5582 = ORIENTED_EDGE('',*,*,#2007,.F.);
+#5583 = ORIENTED_EDGE('',*,*,#5567,.F.);
+#5584 = PLANE('',#5585);
+#5585 = AXIS2_PLACEMENT_3D('',#5586,#5587,#5588);
+#5586 = CARTESIAN_POINT('',(0.875,2.5,0.));
+#5587 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5588 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5589 = ADVANCED_FACE('',(#5590),#5601,.F.);
+#5590 = FACE_BOUND('',#5591,.F.);
+#5591 = EDGE_LOOP('',(#5592,#5593,#5594,#5595));
+#5592 = ORIENTED_EDGE('',*,*,#2095,.T.);
+#5593 = ORIENTED_EDGE('',*,*,#2135,.T.);
+#5594 = ORIENTED_EDGE('',*,*,#2160,.T.);
+#5595 = ORIENTED_EDGE('',*,*,#5596,.T.);
+#5596 = EDGE_CURVE('',#2161,#2096,#5597,.T.);
+#5597 = LINE('',#5598,#5599);
+#5598 = CARTESIAN_POINT('',(1.375,2.5,0.));
+#5599 = VECTOR('',#5600,1.);
+#5600 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5601 = PLANE('',#5602);
+#5602 = AXIS2_PLACEMENT_3D('',#5603,#5604,#5605);
+#5603 = CARTESIAN_POINT('',(1.25,2.324839749899,0.));
+#5604 = DIRECTION('',(0.,0.,1.));
+#5605 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5606 = ADVANCED_FACE('',(#5607),#5613,.F.);
+#5607 = FACE_BOUND('',#5608,.F.);
+#5608 = EDGE_LOOP('',(#5609,#5610,#5611,#5612));
+#5609 = ORIENTED_EDGE('',*,*,#2179,.T.);
+#5610 = ORIENTED_EDGE('',*,*,#5300,.T.);
+#5611 = ORIENTED_EDGE('',*,*,#2105,.F.);
+#5612 = ORIENTED_EDGE('',*,*,#5596,.F.);
+#5613 = PLANE('',#5614);
+#5614 = AXIS2_PLACEMENT_3D('',#5615,#5616,#5617);
+#5615 = CARTESIAN_POINT('',(1.375,2.5,0.));
+#5616 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5617 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5618 = ADVANCED_FACE('',(#5619),#5630,.F.);
+#5619 = FACE_BOUND('',#5620,.F.);
+#5620 = EDGE_LOOP('',(#5621,#5622,#5623,#5624));
+#5621 = ORIENTED_EDGE('',*,*,#2193,.T.);
+#5622 = ORIENTED_EDGE('',*,*,#2233,.T.);
+#5623 = ORIENTED_EDGE('',*,*,#2258,.T.);
+#5624 = ORIENTED_EDGE('',*,*,#5625,.T.);
+#5625 = EDGE_CURVE('',#2259,#2194,#5626,.T.);
+#5626 = LINE('',#5627,#5628);
+#5627 = CARTESIAN_POINT('',(1.875,2.5,0.));
+#5628 = VECTOR('',#5629,1.);
+#5629 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5630 = PLANE('',#5631);
+#5631 = AXIS2_PLACEMENT_3D('',#5632,#5633,#5634);
+#5632 = CARTESIAN_POINT('',(1.75,2.324839749899,0.));
+#5633 = DIRECTION('',(0.,0.,1.));
+#5634 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5635 = ADVANCED_FACE('',(#5636),#5642,.F.);
+#5636 = FACE_BOUND('',#5637,.F.);
+#5637 = EDGE_LOOP('',(#5638,#5639,#5640,#5641));
+#5638 = ORIENTED_EDGE('',*,*,#2277,.T.);
+#5639 = ORIENTED_EDGE('',*,*,#5283,.T.);
+#5640 = ORIENTED_EDGE('',*,*,#2203,.F.);
+#5641 = ORIENTED_EDGE('',*,*,#5625,.F.);
+#5642 = PLANE('',#5643);
+#5643 = AXIS2_PLACEMENT_3D('',#5644,#5645,#5646);
+#5644 = CARTESIAN_POINT('',(1.875,2.5,0.));
+#5645 = DIRECTION('',(-4.555315873023E-16,-1.,0.));
+#5646 = DIRECTION('',(-1.,4.555315873023E-16,0.));
+#5647 = ADVANCED_FACE('',(#5648),#5659,.T.);
+#5648 = FACE_BOUND('',#5649,.T.);
+#5649 = EDGE_LOOP('',(#5650,#5656,#5657,#5658));
+#5650 = ORIENTED_EDGE('',*,*,#5651,.T.);
+#5651 = EDGE_CURVE('',#2576,#2510,#5652,.T.);
+#5652 = LINE('',#5653,#5654);
+#5653 = CARTESIAN_POINT('',(2.5,1.625,0.2));
+#5654 = VECTOR('',#5655,1.);
+#5655 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5656 = ORIENTED_EDGE('',*,*,#2517,.T.);
+#5657 = ORIENTED_EDGE('',*,*,#2477,.T.);
+#5658 = ORIENTED_EDGE('',*,*,#2575,.T.);
+#5659 = PLANE('',#5660);
+#5660 = AXIS2_PLACEMENT_3D('',#5661,#5662,#5663);
+#5661 = CARTESIAN_POINT('',(2.324839749899,1.75,0.2));
+#5662 = DIRECTION('',(0.,0.,1.));
+#5663 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5664 = ADVANCED_FACE('',(#5665),#5676,.T.);
+#5665 = FACE_BOUND('',#5666,.T.);
+#5666 = EDGE_LOOP('',(#5667,#5673,#5674,#5675));
+#5667 = ORIENTED_EDGE('',*,*,#5668,.T.);
+#5668 = EDGE_CURVE('',#2674,#2608,#5669,.T.);
+#5669 = LINE('',#5670,#5671);
+#5670 = CARTESIAN_POINT('',(2.5,1.125,0.2));
+#5671 = VECTOR('',#5672,1.);
+#5672 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5673 = ORIENTED_EDGE('',*,*,#2615,.T.);
+#5674 = ORIENTED_EDGE('',*,*,#2454,.T.);
+#5675 = ORIENTED_EDGE('',*,*,#2673,.T.);
+#5676 = PLANE('',#5677);
+#5677 = AXIS2_PLACEMENT_3D('',#5678,#5679,#5680);
+#5678 = CARTESIAN_POINT('',(2.324839749899,1.25,0.2));
+#5679 = DIRECTION('',(0.,0.,1.));
+#5680 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5681 = ADVANCED_FACE('',(#5682),#5693,.T.);
+#5682 = FACE_BOUND('',#5683,.T.);
+#5683 = EDGE_LOOP('',(#5684,#5690,#5691,#5692));
+#5684 = ORIENTED_EDGE('',*,*,#5685,.T.);
+#5685 = EDGE_CURVE('',#2772,#2706,#5686,.T.);
+#5686 = LINE('',#5687,#5688);
+#5687 = CARTESIAN_POINT('',(2.5,0.625,0.2));
+#5688 = VECTOR('',#5689,1.);
+#5689 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5690 = ORIENTED_EDGE('',*,*,#2713,.T.);
+#5691 = ORIENTED_EDGE('',*,*,#2431,.T.);
+#5692 = ORIENTED_EDGE('',*,*,#2771,.T.);
+#5693 = PLANE('',#5694);
+#5694 = AXIS2_PLACEMENT_3D('',#5695,#5696,#5697);
+#5695 = CARTESIAN_POINT('',(2.324839749899,0.75,0.2));
+#5696 = DIRECTION('',(0.,0.,1.));
+#5697 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5698 = ADVANCED_FACE('',(#5699),#5710,.T.);
+#5699 = FACE_BOUND('',#5700,.T.);
+#5700 = EDGE_LOOP('',(#5701,#5707,#5708,#5709));
+#5701 = ORIENTED_EDGE('',*,*,#5702,.T.);
+#5702 = EDGE_CURVE('',#2870,#2804,#5703,.T.);
+#5703 = LINE('',#5704,#5705);
+#5704 = CARTESIAN_POINT('',(2.5,0.125,0.2));
+#5705 = VECTOR('',#5706,1.);
+#5706 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5707 = ORIENTED_EDGE('',*,*,#2811,.T.);
+#5708 = ORIENTED_EDGE('',*,*,#2408,.T.);
+#5709 = ORIENTED_EDGE('',*,*,#2869,.T.);
+#5710 = PLANE('',#5711);
+#5711 = AXIS2_PLACEMENT_3D('',#5712,#5713,#5714);
+#5712 = CARTESIAN_POINT('',(2.324839749899,0.25,0.2));
+#5713 = DIRECTION('',(0.,0.,1.));
+#5714 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5715 = ADVANCED_FACE('',(#5716),#5727,.T.);
+#5716 = FACE_BOUND('',#5717,.T.);
+#5717 = EDGE_LOOP('',(#5718,#5724,#5725,#5726));
+#5718 = ORIENTED_EDGE('',*,*,#5719,.T.);
+#5719 = EDGE_CURVE('',#2968,#2902,#5720,.T.);
+#5720 = LINE('',#5721,#5722);
+#5721 = CARTESIAN_POINT('',(2.5,-0.375,0.2));
+#5722 = VECTOR('',#5723,1.);
+#5723 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5724 = ORIENTED_EDGE('',*,*,#2909,.T.);
+#5725 = ORIENTED_EDGE('',*,*,#2385,.T.);
+#5726 = ORIENTED_EDGE('',*,*,#2967,.T.);
+#5727 = PLANE('',#5728);
+#5728 = AXIS2_PLACEMENT_3D('',#5729,#5730,#5731);
+#5729 = CARTESIAN_POINT('',(2.324839749899,-0.25,0.2));
+#5730 = DIRECTION('',(0.,0.,1.));
+#5731 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5732 = ADVANCED_FACE('',(#5733),#5744,.T.);
+#5733 = FACE_BOUND('',#5734,.T.);
+#5734 = EDGE_LOOP('',(#5735,#5741,#5742,#5743));
+#5735 = ORIENTED_EDGE('',*,*,#5736,.T.);
+#5736 = EDGE_CURVE('',#3066,#3000,#5737,.T.);
+#5737 = LINE('',#5738,#5739);
+#5738 = CARTESIAN_POINT('',(2.5,-0.875,0.2));
+#5739 = VECTOR('',#5740,1.);
+#5740 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5741 = ORIENTED_EDGE('',*,*,#3007,.T.);
+#5742 = ORIENTED_EDGE('',*,*,#2362,.T.);
+#5743 = ORIENTED_EDGE('',*,*,#3065,.T.);
+#5744 = PLANE('',#5745);
+#5745 = AXIS2_PLACEMENT_3D('',#5746,#5747,#5748);
+#5746 = CARTESIAN_POINT('',(2.324839749899,-0.75,0.2));
+#5747 = DIRECTION('',(0.,0.,1.));
+#5748 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5749 = ADVANCED_FACE('',(#5750),#5761,.T.);
+#5750 = FACE_BOUND('',#5751,.T.);
+#5751 = EDGE_LOOP('',(#5752,#5758,#5759,#5760));
+#5752 = ORIENTED_EDGE('',*,*,#5753,.T.);
+#5753 = EDGE_CURVE('',#3164,#3098,#5754,.T.);
+#5754 = LINE('',#5755,#5756);
+#5755 = CARTESIAN_POINT('',(2.5,-1.375,0.2));
+#5756 = VECTOR('',#5757,1.);
+#5757 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5758 = ORIENTED_EDGE('',*,*,#3105,.T.);
+#5759 = ORIENTED_EDGE('',*,*,#2339,.T.);
+#5760 = ORIENTED_EDGE('',*,*,#3163,.T.);
+#5761 = PLANE('',#5762);
+#5762 = AXIS2_PLACEMENT_3D('',#5763,#5764,#5765);
+#5763 = CARTESIAN_POINT('',(2.324839749899,-1.25,0.2));
+#5764 = DIRECTION('',(0.,0.,1.));
+#5765 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5766 = ADVANCED_FACE('',(#5767),#5778,.T.);
+#5767 = FACE_BOUND('',#5768,.T.);
+#5768 = EDGE_LOOP('',(#5769,#5775,#5776,#5777));
+#5769 = ORIENTED_EDGE('',*,*,#5770,.T.);
+#5770 = EDGE_CURVE('',#3262,#3196,#5771,.T.);
+#5771 = LINE('',#5772,#5773);
+#5772 = CARTESIAN_POINT('',(2.5,-1.875,0.2));
+#5773 = VECTOR('',#5774,1.);
+#5774 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5775 = ORIENTED_EDGE('',*,*,#3203,.T.);
+#5776 = ORIENTED_EDGE('',*,*,#2316,.T.);
+#5777 = ORIENTED_EDGE('',*,*,#3261,.T.);
+#5778 = PLANE('',#5779);
+#5779 = AXIS2_PLACEMENT_3D('',#5780,#5781,#5782);
+#5780 = CARTESIAN_POINT('',(2.324839749899,-1.75,0.2));
+#5781 = DIRECTION('',(0.,0.,1.));
+#5782 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5783 = ADVANCED_FACE('',(#5784),#5795,.F.);
+#5784 = FACE_BOUND('',#5785,.F.);
+#5785 = EDGE_LOOP('',(#5786,#5787,#5788,#5789));
+#5786 = ORIENTED_EDGE('',*,*,#2499,.T.);
+#5787 = ORIENTED_EDGE('',*,*,#2539,.T.);
+#5788 = ORIENTED_EDGE('',*,*,#2564,.T.);
+#5789 = ORIENTED_EDGE('',*,*,#5790,.T.);
+#5790 = EDGE_CURVE('',#2565,#2500,#5791,.T.);
+#5791 = LINE('',#5792,#5793);
+#5792 = CARTESIAN_POINT('',(2.5,1.625,0.));
+#5793 = VECTOR('',#5794,1.);
+#5794 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5795 = PLANE('',#5796);
+#5796 = AXIS2_PLACEMENT_3D('',#5797,#5798,#5799);
+#5797 = CARTESIAN_POINT('',(2.324839749899,1.75,0.));
+#5798 = DIRECTION('',(0.,0.,1.));
+#5799 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5800 = ADVANCED_FACE('',(#5801),#5807,.F.);
+#5801 = FACE_BOUND('',#5802,.F.);
+#5802 = EDGE_LOOP('',(#5803,#5804,#5805,#5806));
+#5803 = ORIENTED_EDGE('',*,*,#2583,.T.);
+#5804 = ORIENTED_EDGE('',*,*,#5651,.T.);
+#5805 = ORIENTED_EDGE('',*,*,#2509,.F.);
+#5806 = ORIENTED_EDGE('',*,*,#5790,.F.);
+#5807 = PLANE('',#5808);
+#5808 = AXIS2_PLACEMENT_3D('',#5809,#5810,#5811);
+#5809 = CARTESIAN_POINT('',(2.5,1.625,0.));
+#5810 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5811 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5812 = ADVANCED_FACE('',(#5813),#5824,.F.);
+#5813 = FACE_BOUND('',#5814,.F.);
+#5814 = EDGE_LOOP('',(#5815,#5816,#5817,#5818));
+#5815 = ORIENTED_EDGE('',*,*,#2597,.T.);
+#5816 = ORIENTED_EDGE('',*,*,#2637,.T.);
+#5817 = ORIENTED_EDGE('',*,*,#2662,.T.);
+#5818 = ORIENTED_EDGE('',*,*,#5819,.T.);
+#5819 = EDGE_CURVE('',#2663,#2598,#5820,.T.);
+#5820 = LINE('',#5821,#5822);
+#5821 = CARTESIAN_POINT('',(2.5,1.125,0.));
+#5822 = VECTOR('',#5823,1.);
+#5823 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5824 = PLANE('',#5825);
+#5825 = AXIS2_PLACEMENT_3D('',#5826,#5827,#5828);
+#5826 = CARTESIAN_POINT('',(2.324839749899,1.25,0.));
+#5827 = DIRECTION('',(0.,0.,1.));
+#5828 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5829 = ADVANCED_FACE('',(#5830),#5836,.F.);
+#5830 = FACE_BOUND('',#5831,.F.);
+#5831 = EDGE_LOOP('',(#5832,#5833,#5834,#5835));
+#5832 = ORIENTED_EDGE('',*,*,#2681,.T.);
+#5833 = ORIENTED_EDGE('',*,*,#5668,.T.);
+#5834 = ORIENTED_EDGE('',*,*,#2607,.F.);
+#5835 = ORIENTED_EDGE('',*,*,#5819,.F.);
+#5836 = PLANE('',#5837);
+#5837 = AXIS2_PLACEMENT_3D('',#5838,#5839,#5840);
+#5838 = CARTESIAN_POINT('',(2.5,1.125,0.));
+#5839 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5840 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5841 = ADVANCED_FACE('',(#5842),#5853,.F.);
+#5842 = FACE_BOUND('',#5843,.F.);
+#5843 = EDGE_LOOP('',(#5844,#5845,#5846,#5847));
+#5844 = ORIENTED_EDGE('',*,*,#2695,.T.);
+#5845 = ORIENTED_EDGE('',*,*,#2735,.T.);
+#5846 = ORIENTED_EDGE('',*,*,#2760,.T.);
+#5847 = ORIENTED_EDGE('',*,*,#5848,.T.);
+#5848 = EDGE_CURVE('',#2761,#2696,#5849,.T.);
+#5849 = LINE('',#5850,#5851);
+#5850 = CARTESIAN_POINT('',(2.5,0.625,0.));
+#5851 = VECTOR('',#5852,1.);
+#5852 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5853 = PLANE('',#5854);
+#5854 = AXIS2_PLACEMENT_3D('',#5855,#5856,#5857);
+#5855 = CARTESIAN_POINT('',(2.324839749899,0.75,0.));
+#5856 = DIRECTION('',(0.,0.,1.));
+#5857 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5858 = ADVANCED_FACE('',(#5859),#5865,.F.);
+#5859 = FACE_BOUND('',#5860,.F.);
+#5860 = EDGE_LOOP('',(#5861,#5862,#5863,#5864));
+#5861 = ORIENTED_EDGE('',*,*,#2779,.T.);
+#5862 = ORIENTED_EDGE('',*,*,#5685,.T.);
+#5863 = ORIENTED_EDGE('',*,*,#2705,.F.);
+#5864 = ORIENTED_EDGE('',*,*,#5848,.F.);
+#5865 = PLANE('',#5866);
+#5866 = AXIS2_PLACEMENT_3D('',#5867,#5868,#5869);
+#5867 = CARTESIAN_POINT('',(2.5,0.625,0.));
+#5868 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5869 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5870 = ADVANCED_FACE('',(#5871),#5882,.F.);
+#5871 = FACE_BOUND('',#5872,.F.);
+#5872 = EDGE_LOOP('',(#5873,#5874,#5875,#5876));
+#5873 = ORIENTED_EDGE('',*,*,#2793,.T.);
+#5874 = ORIENTED_EDGE('',*,*,#2833,.T.);
+#5875 = ORIENTED_EDGE('',*,*,#2858,.T.);
+#5876 = ORIENTED_EDGE('',*,*,#5877,.T.);
+#5877 = EDGE_CURVE('',#2859,#2794,#5878,.T.);
+#5878 = LINE('',#5879,#5880);
+#5879 = CARTESIAN_POINT('',(2.5,0.125,0.));
+#5880 = VECTOR('',#5881,1.);
+#5881 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5882 = PLANE('',#5883);
+#5883 = AXIS2_PLACEMENT_3D('',#5884,#5885,#5886);
+#5884 = CARTESIAN_POINT('',(2.324839749899,0.25,0.));
+#5885 = DIRECTION('',(0.,0.,1.));
+#5886 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5887 = ADVANCED_FACE('',(#5888),#5894,.F.);
+#5888 = FACE_BOUND('',#5889,.F.);
+#5889 = EDGE_LOOP('',(#5890,#5891,#5892,#5893));
+#5890 = ORIENTED_EDGE('',*,*,#2877,.T.);
+#5891 = ORIENTED_EDGE('',*,*,#5702,.T.);
+#5892 = ORIENTED_EDGE('',*,*,#2803,.F.);
+#5893 = ORIENTED_EDGE('',*,*,#5877,.F.);
+#5894 = PLANE('',#5895);
+#5895 = AXIS2_PLACEMENT_3D('',#5896,#5897,#5898);
+#5896 = CARTESIAN_POINT('',(2.5,0.125,0.));
+#5897 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5898 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5899 = ADVANCED_FACE('',(#5900),#5911,.F.);
+#5900 = FACE_BOUND('',#5901,.F.);
+#5901 = EDGE_LOOP('',(#5902,#5903,#5904,#5905));
+#5902 = ORIENTED_EDGE('',*,*,#2891,.T.);
+#5903 = ORIENTED_EDGE('',*,*,#2931,.T.);
+#5904 = ORIENTED_EDGE('',*,*,#2956,.T.);
+#5905 = ORIENTED_EDGE('',*,*,#5906,.T.);
+#5906 = EDGE_CURVE('',#2957,#2892,#5907,.T.);
+#5907 = LINE('',#5908,#5909);
+#5908 = CARTESIAN_POINT('',(2.5,-0.375,0.));
+#5909 = VECTOR('',#5910,1.);
+#5910 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5911 = PLANE('',#5912);
+#5912 = AXIS2_PLACEMENT_3D('',#5913,#5914,#5915);
+#5913 = CARTESIAN_POINT('',(2.324839749899,-0.25,0.));
+#5914 = DIRECTION('',(0.,0.,1.));
+#5915 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5916 = ADVANCED_FACE('',(#5917),#5923,.F.);
+#5917 = FACE_BOUND('',#5918,.F.);
+#5918 = EDGE_LOOP('',(#5919,#5920,#5921,#5922));
+#5919 = ORIENTED_EDGE('',*,*,#2975,.T.);
+#5920 = ORIENTED_EDGE('',*,*,#5719,.T.);
+#5921 = ORIENTED_EDGE('',*,*,#2901,.F.);
+#5922 = ORIENTED_EDGE('',*,*,#5906,.F.);
+#5923 = PLANE('',#5924);
+#5924 = AXIS2_PLACEMENT_3D('',#5925,#5926,#5927);
+#5925 = CARTESIAN_POINT('',(2.5,-0.375,0.));
+#5926 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5927 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5928 = ADVANCED_FACE('',(#5929),#5940,.F.);
+#5929 = FACE_BOUND('',#5930,.F.);
+#5930 = EDGE_LOOP('',(#5931,#5932,#5933,#5934));
+#5931 = ORIENTED_EDGE('',*,*,#2989,.T.);
+#5932 = ORIENTED_EDGE('',*,*,#3029,.T.);
+#5933 = ORIENTED_EDGE('',*,*,#3054,.T.);
+#5934 = ORIENTED_EDGE('',*,*,#5935,.T.);
+#5935 = EDGE_CURVE('',#3055,#2990,#5936,.T.);
+#5936 = LINE('',#5937,#5938);
+#5937 = CARTESIAN_POINT('',(2.5,-0.875,0.));
+#5938 = VECTOR('',#5939,1.);
+#5939 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5940 = PLANE('',#5941);
+#5941 = AXIS2_PLACEMENT_3D('',#5942,#5943,#5944);
+#5942 = CARTESIAN_POINT('',(2.324839749899,-0.75,0.));
+#5943 = DIRECTION('',(0.,0.,1.));
+#5944 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5945 = ADVANCED_FACE('',(#5946),#5952,.F.);
+#5946 = FACE_BOUND('',#5947,.F.);
+#5947 = EDGE_LOOP('',(#5948,#5949,#5950,#5951));
+#5948 = ORIENTED_EDGE('',*,*,#3073,.T.);
+#5949 = ORIENTED_EDGE('',*,*,#5736,.T.);
+#5950 = ORIENTED_EDGE('',*,*,#2999,.F.);
+#5951 = ORIENTED_EDGE('',*,*,#5935,.F.);
+#5952 = PLANE('',#5953);
+#5953 = AXIS2_PLACEMENT_3D('',#5954,#5955,#5956);
+#5954 = CARTESIAN_POINT('',(2.5,-0.875,0.));
+#5955 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5956 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5957 = ADVANCED_FACE('',(#5958),#5969,.F.);
+#5958 = FACE_BOUND('',#5959,.F.);
+#5959 = EDGE_LOOP('',(#5960,#5961,#5962,#5963));
+#5960 = ORIENTED_EDGE('',*,*,#3087,.T.);
+#5961 = ORIENTED_EDGE('',*,*,#3127,.T.);
+#5962 = ORIENTED_EDGE('',*,*,#3152,.T.);
+#5963 = ORIENTED_EDGE('',*,*,#5964,.T.);
+#5964 = EDGE_CURVE('',#3153,#3088,#5965,.T.);
+#5965 = LINE('',#5966,#5967);
+#5966 = CARTESIAN_POINT('',(2.5,-1.375,0.));
+#5967 = VECTOR('',#5968,1.);
+#5968 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5969 = PLANE('',#5970);
+#5970 = AXIS2_PLACEMENT_3D('',#5971,#5972,#5973);
+#5971 = CARTESIAN_POINT('',(2.324839749899,-1.25,0.));
+#5972 = DIRECTION('',(0.,0.,1.));
+#5973 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5974 = ADVANCED_FACE('',(#5975),#5981,.F.);
+#5975 = FACE_BOUND('',#5976,.F.);
+#5976 = EDGE_LOOP('',(#5977,#5978,#5979,#5980));
+#5977 = ORIENTED_EDGE('',*,*,#3171,.T.);
+#5978 = ORIENTED_EDGE('',*,*,#5753,.T.);
+#5979 = ORIENTED_EDGE('',*,*,#3097,.F.);
+#5980 = ORIENTED_EDGE('',*,*,#5964,.F.);
+#5981 = PLANE('',#5982);
+#5982 = AXIS2_PLACEMENT_3D('',#5983,#5984,#5985);
+#5983 = CARTESIAN_POINT('',(2.5,-1.375,0.));
+#5984 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#5985 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5986 = ADVANCED_FACE('',(#5987),#5998,.F.);
+#5987 = FACE_BOUND('',#5988,.F.);
+#5988 = EDGE_LOOP('',(#5989,#5990,#5991,#5992));
+#5989 = ORIENTED_EDGE('',*,*,#3185,.T.);
+#5990 = ORIENTED_EDGE('',*,*,#3225,.T.);
+#5991 = ORIENTED_EDGE('',*,*,#3250,.T.);
+#5992 = ORIENTED_EDGE('',*,*,#5993,.T.);
+#5993 = EDGE_CURVE('',#3251,#3186,#5994,.T.);
+#5994 = LINE('',#5995,#5996);
+#5995 = CARTESIAN_POINT('',(2.5,-1.875,0.));
+#5996 = VECTOR('',#5997,1.);
+#5997 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#5998 = PLANE('',#5999);
+#5999 = AXIS2_PLACEMENT_3D('',#6000,#6001,#6002);
+#6000 = CARTESIAN_POINT('',(2.324839749899,-1.75,0.));
+#6001 = DIRECTION('',(0.,0.,1.));
+#6002 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#6003 = ADVANCED_FACE('',(#6004),#6010,.F.);
+#6004 = FACE_BOUND('',#6005,.F.);
+#6005 = EDGE_LOOP('',(#6006,#6007,#6008,#6009));
+#6006 = ORIENTED_EDGE('',*,*,#3269,.T.);
+#6007 = ORIENTED_EDGE('',*,*,#5770,.T.);
+#6008 = ORIENTED_EDGE('',*,*,#3195,.F.);
+#6009 = ORIENTED_EDGE('',*,*,#5993,.F.);
+#6010 = PLANE('',#6011);
+#6011 = AXIS2_PLACEMENT_3D('',#6012,#6013,#6014);
+#6012 = CARTESIAN_POINT('',(2.5,-1.875,0.));
+#6013 = DIRECTION('',(-1.,3.445092848398E-16,0.));
+#6014 = DIRECTION('',(3.445092848398E-16,1.,0.));
+#6015 = ADVANCED_FACE('',(#6016),#6027,.T.);
+#6016 = FACE_BOUND('',#6017,.T.);
+#6017 = EDGE_LOOP('',(#6018,#6024,#6025,#6026));
+#6018 = ORIENTED_EDGE('',*,*,#6019,.T.);
+#6019 = EDGE_CURVE('',#3568,#3502,#6020,.T.);
+#6020 = LINE('',#6021,#6022);
+#6021 = CARTESIAN_POINT('',(1.625,-2.5,0.2));
+#6022 = VECTOR('',#6023,1.);
+#6023 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6024 = ORIENTED_EDGE('',*,*,#3509,.T.);
+#6025 = ORIENTED_EDGE('',*,*,#3467,.T.);
+#6026 = ORIENTED_EDGE('',*,*,#3567,.T.);
+#6027 = PLANE('',#6028);
+#6028 = AXIS2_PLACEMENT_3D('',#6029,#6030,#6031);
+#6029 = CARTESIAN_POINT('',(1.75,-2.324839749899,0.2));
+#6030 = DIRECTION('',(0.,0.,1.));
+#6031 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6032 = ADVANCED_FACE('',(#6033),#6044,.T.);
+#6033 = FACE_BOUND('',#6034,.T.);
+#6034 = EDGE_LOOP('',(#6035,#6041,#6042,#6043));
+#6035 = ORIENTED_EDGE('',*,*,#6036,.T.);
+#6036 = EDGE_CURVE('',#3666,#3600,#6037,.T.);
+#6037 = LINE('',#6038,#6039);
+#6038 = CARTESIAN_POINT('',(1.125,-2.5,0.2));
+#6039 = VECTOR('',#6040,1.);
+#6040 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6041 = ORIENTED_EDGE('',*,*,#3607,.T.);
+#6042 = ORIENTED_EDGE('',*,*,#3444,.T.);
+#6043 = ORIENTED_EDGE('',*,*,#3665,.T.);
+#6044 = PLANE('',#6045);
+#6045 = AXIS2_PLACEMENT_3D('',#6046,#6047,#6048);
+#6046 = CARTESIAN_POINT('',(1.25,-2.324839749899,0.2));
+#6047 = DIRECTION('',(0.,0.,1.));
+#6048 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6049 = ADVANCED_FACE('',(#6050),#6061,.T.);
+#6050 = FACE_BOUND('',#6051,.T.);
+#6051 = EDGE_LOOP('',(#6052,#6058,#6059,#6060));
+#6052 = ORIENTED_EDGE('',*,*,#6053,.T.);
+#6053 = EDGE_CURVE('',#3764,#3698,#6054,.T.);
+#6054 = LINE('',#6055,#6056);
+#6055 = CARTESIAN_POINT('',(0.625,-2.5,0.2));
+#6056 = VECTOR('',#6057,1.);
+#6057 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6058 = ORIENTED_EDGE('',*,*,#3705,.T.);
+#6059 = ORIENTED_EDGE('',*,*,#3421,.T.);
+#6060 = ORIENTED_EDGE('',*,*,#3763,.T.);
+#6061 = PLANE('',#6062);
+#6062 = AXIS2_PLACEMENT_3D('',#6063,#6064,#6065);
+#6063 = CARTESIAN_POINT('',(0.75,-2.324839749899,0.2));
+#6064 = DIRECTION('',(0.,0.,1.));
+#6065 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6066 = ADVANCED_FACE('',(#6067),#6078,.T.);
+#6067 = FACE_BOUND('',#6068,.T.);
+#6068 = EDGE_LOOP('',(#6069,#6075,#6076,#6077));
+#6069 = ORIENTED_EDGE('',*,*,#6070,.T.);
+#6070 = EDGE_CURVE('',#3862,#3796,#6071,.T.);
+#6071 = LINE('',#6072,#6073);
+#6072 = CARTESIAN_POINT('',(0.125,-2.5,0.2));
+#6073 = VECTOR('',#6074,1.);
+#6074 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6075 = ORIENTED_EDGE('',*,*,#3803,.T.);
+#6076 = ORIENTED_EDGE('',*,*,#3398,.T.);
+#6077 = ORIENTED_EDGE('',*,*,#3861,.T.);
+#6078 = PLANE('',#6079);
+#6079 = AXIS2_PLACEMENT_3D('',#6080,#6081,#6082);
+#6080 = CARTESIAN_POINT('',(0.25,-2.324839749899,0.2));
+#6081 = DIRECTION('',(0.,0.,1.));
+#6082 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6083 = ADVANCED_FACE('',(#6084),#6095,.T.);
+#6084 = FACE_BOUND('',#6085,.T.);
+#6085 = EDGE_LOOP('',(#6086,#6092,#6093,#6094));
+#6086 = ORIENTED_EDGE('',*,*,#6087,.T.);
+#6087 = EDGE_CURVE('',#3960,#3894,#6088,.T.);
+#6088 = LINE('',#6089,#6090);
+#6089 = CARTESIAN_POINT('',(-0.375,-2.5,0.2));
+#6090 = VECTOR('',#6091,1.);
+#6091 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6092 = ORIENTED_EDGE('',*,*,#3901,.T.);
+#6093 = ORIENTED_EDGE('',*,*,#3375,.T.);
+#6094 = ORIENTED_EDGE('',*,*,#3959,.T.);
+#6095 = PLANE('',#6096);
+#6096 = AXIS2_PLACEMENT_3D('',#6097,#6098,#6099);
+#6097 = CARTESIAN_POINT('',(-0.25,-2.324839749899,0.2));
+#6098 = DIRECTION('',(0.,0.,1.));
+#6099 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6100 = ADVANCED_FACE('',(#6101),#6112,.T.);
+#6101 = FACE_BOUND('',#6102,.T.);
+#6102 = EDGE_LOOP('',(#6103,#6109,#6110,#6111));
+#6103 = ORIENTED_EDGE('',*,*,#6104,.T.);
+#6104 = EDGE_CURVE('',#4058,#3992,#6105,.T.);
+#6105 = LINE('',#6106,#6107);
+#6106 = CARTESIAN_POINT('',(-0.875,-2.5,0.2));
+#6107 = VECTOR('',#6108,1.);
+#6108 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6109 = ORIENTED_EDGE('',*,*,#3999,.T.);
+#6110 = ORIENTED_EDGE('',*,*,#3352,.T.);
+#6111 = ORIENTED_EDGE('',*,*,#4057,.T.);
+#6112 = PLANE('',#6113);
+#6113 = AXIS2_PLACEMENT_3D('',#6114,#6115,#6116);
+#6114 = CARTESIAN_POINT('',(-0.75,-2.324839749899,0.2));
+#6115 = DIRECTION('',(0.,0.,1.));
+#6116 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6117 = ADVANCED_FACE('',(#6118),#6129,.T.);
+#6118 = FACE_BOUND('',#6119,.T.);
+#6119 = EDGE_LOOP('',(#6120,#6126,#6127,#6128));
+#6120 = ORIENTED_EDGE('',*,*,#6121,.T.);
+#6121 = EDGE_CURVE('',#4156,#4090,#6122,.T.);
+#6122 = LINE('',#6123,#6124);
+#6123 = CARTESIAN_POINT('',(-1.375,-2.5,0.2));
+#6124 = VECTOR('',#6125,1.);
+#6125 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6126 = ORIENTED_EDGE('',*,*,#4097,.T.);
+#6127 = ORIENTED_EDGE('',*,*,#3329,.T.);
+#6128 = ORIENTED_EDGE('',*,*,#4155,.T.);
+#6129 = PLANE('',#6130);
+#6130 = AXIS2_PLACEMENT_3D('',#6131,#6132,#6133);
+#6131 = CARTESIAN_POINT('',(-1.25,-2.324839749899,0.2));
+#6132 = DIRECTION('',(0.,0.,1.));
+#6133 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6134 = ADVANCED_FACE('',(#6135),#6146,.T.);
+#6135 = FACE_BOUND('',#6136,.T.);
+#6136 = EDGE_LOOP('',(#6137,#6143,#6144,#6145));
+#6137 = ORIENTED_EDGE('',*,*,#6138,.T.);
+#6138 = EDGE_CURVE('',#4254,#4188,#6139,.T.);
+#6139 = LINE('',#6140,#6141);
+#6140 = CARTESIAN_POINT('',(-1.875,-2.5,0.2));
+#6141 = VECTOR('',#6142,1.);
+#6142 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6143 = ORIENTED_EDGE('',*,*,#4195,.T.);
+#6144 = ORIENTED_EDGE('',*,*,#3306,.T.);
+#6145 = ORIENTED_EDGE('',*,*,#4253,.T.);
+#6146 = PLANE('',#6147);
+#6147 = AXIS2_PLACEMENT_3D('',#6148,#6149,#6150);
+#6148 = CARTESIAN_POINT('',(-1.75,-2.324839749899,0.2));
+#6149 = DIRECTION('',(0.,0.,1.));
+#6150 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6151 = ADVANCED_FACE('',(#6152),#6163,.F.);
+#6152 = FACE_BOUND('',#6153,.F.);
+#6153 = EDGE_LOOP('',(#6154,#6155,#6156,#6157));
+#6154 = ORIENTED_EDGE('',*,*,#3491,.T.);
+#6155 = ORIENTED_EDGE('',*,*,#3531,.T.);
+#6156 = ORIENTED_EDGE('',*,*,#3556,.T.);
+#6157 = ORIENTED_EDGE('',*,*,#6158,.T.);
+#6158 = EDGE_CURVE('',#3557,#3492,#6159,.T.);
+#6159 = LINE('',#6160,#6161);
+#6160 = CARTESIAN_POINT('',(1.625,-2.5,0.));
+#6161 = VECTOR('',#6162,1.);
+#6162 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6163 = PLANE('',#6164);
+#6164 = AXIS2_PLACEMENT_3D('',#6165,#6166,#6167);
+#6165 = CARTESIAN_POINT('',(1.75,-2.324839749899,0.));
+#6166 = DIRECTION('',(0.,0.,1.));
+#6167 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6168 = ADVANCED_FACE('',(#6169),#6175,.F.);
+#6169 = FACE_BOUND('',#6170,.F.);
+#6170 = EDGE_LOOP('',(#6171,#6172,#6173,#6174));
+#6171 = ORIENTED_EDGE('',*,*,#3575,.T.);
+#6172 = ORIENTED_EDGE('',*,*,#6019,.T.);
+#6173 = ORIENTED_EDGE('',*,*,#3501,.F.);
+#6174 = ORIENTED_EDGE('',*,*,#6158,.F.);
+#6175 = PLANE('',#6176);
+#6176 = AXIS2_PLACEMENT_3D('',#6177,#6178,#6179);
+#6177 = CARTESIAN_POINT('',(1.625,-2.5,0.));
+#6178 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6179 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6180 = ADVANCED_FACE('',(#6181),#6192,.F.);
+#6181 = FACE_BOUND('',#6182,.F.);
+#6182 = EDGE_LOOP('',(#6183,#6184,#6185,#6186));
+#6183 = ORIENTED_EDGE('',*,*,#3589,.T.);
+#6184 = ORIENTED_EDGE('',*,*,#3629,.T.);
+#6185 = ORIENTED_EDGE('',*,*,#3654,.T.);
+#6186 = ORIENTED_EDGE('',*,*,#6187,.T.);
+#6187 = EDGE_CURVE('',#3655,#3590,#6188,.T.);
+#6188 = LINE('',#6189,#6190);
+#6189 = CARTESIAN_POINT('',(1.125,-2.5,0.));
+#6190 = VECTOR('',#6191,1.);
+#6191 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6192 = PLANE('',#6193);
+#6193 = AXIS2_PLACEMENT_3D('',#6194,#6195,#6196);
+#6194 = CARTESIAN_POINT('',(1.25,-2.324839749899,0.));
+#6195 = DIRECTION('',(0.,0.,1.));
+#6196 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6197 = ADVANCED_FACE('',(#6198),#6204,.F.);
+#6198 = FACE_BOUND('',#6199,.F.);
+#6199 = EDGE_LOOP('',(#6200,#6201,#6202,#6203));
+#6200 = ORIENTED_EDGE('',*,*,#3673,.T.);
+#6201 = ORIENTED_EDGE('',*,*,#6036,.T.);
+#6202 = ORIENTED_EDGE('',*,*,#3599,.F.);
+#6203 = ORIENTED_EDGE('',*,*,#6187,.F.);
+#6204 = PLANE('',#6205);
+#6205 = AXIS2_PLACEMENT_3D('',#6206,#6207,#6208);
+#6206 = CARTESIAN_POINT('',(1.125,-2.5,0.));
+#6207 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6208 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6209 = ADVANCED_FACE('',(#6210),#6221,.F.);
+#6210 = FACE_BOUND('',#6211,.F.);
+#6211 = EDGE_LOOP('',(#6212,#6213,#6214,#6215));
+#6212 = ORIENTED_EDGE('',*,*,#3687,.T.);
+#6213 = ORIENTED_EDGE('',*,*,#3727,.T.);
+#6214 = ORIENTED_EDGE('',*,*,#3752,.T.);
+#6215 = ORIENTED_EDGE('',*,*,#6216,.T.);
+#6216 = EDGE_CURVE('',#3753,#3688,#6217,.T.);
+#6217 = LINE('',#6218,#6219);
+#6218 = CARTESIAN_POINT('',(0.625,-2.5,0.));
+#6219 = VECTOR('',#6220,1.);
+#6220 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6221 = PLANE('',#6222);
+#6222 = AXIS2_PLACEMENT_3D('',#6223,#6224,#6225);
+#6223 = CARTESIAN_POINT('',(0.75,-2.324839749899,0.));
+#6224 = DIRECTION('',(0.,0.,1.));
+#6225 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6226 = ADVANCED_FACE('',(#6227),#6233,.F.);
+#6227 = FACE_BOUND('',#6228,.F.);
+#6228 = EDGE_LOOP('',(#6229,#6230,#6231,#6232));
+#6229 = ORIENTED_EDGE('',*,*,#3771,.T.);
+#6230 = ORIENTED_EDGE('',*,*,#6053,.T.);
+#6231 = ORIENTED_EDGE('',*,*,#3697,.F.);
+#6232 = ORIENTED_EDGE('',*,*,#6216,.F.);
+#6233 = PLANE('',#6234);
+#6234 = AXIS2_PLACEMENT_3D('',#6235,#6236,#6237);
+#6235 = CARTESIAN_POINT('',(0.625,-2.5,0.));
+#6236 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6237 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6238 = ADVANCED_FACE('',(#6239),#6250,.F.);
+#6239 = FACE_BOUND('',#6240,.F.);
+#6240 = EDGE_LOOP('',(#6241,#6242,#6243,#6244));
+#6241 = ORIENTED_EDGE('',*,*,#3785,.T.);
+#6242 = ORIENTED_EDGE('',*,*,#3825,.T.);
+#6243 = ORIENTED_EDGE('',*,*,#3850,.T.);
+#6244 = ORIENTED_EDGE('',*,*,#6245,.T.);
+#6245 = EDGE_CURVE('',#3851,#3786,#6246,.T.);
+#6246 = LINE('',#6247,#6248);
+#6247 = CARTESIAN_POINT('',(0.125,-2.5,0.));
+#6248 = VECTOR('',#6249,1.);
+#6249 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6250 = PLANE('',#6251);
+#6251 = AXIS2_PLACEMENT_3D('',#6252,#6253,#6254);
+#6252 = CARTESIAN_POINT('',(0.25,-2.324839749899,0.));
+#6253 = DIRECTION('',(0.,0.,1.));
+#6254 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6255 = ADVANCED_FACE('',(#6256),#6262,.F.);
+#6256 = FACE_BOUND('',#6257,.F.);
+#6257 = EDGE_LOOP('',(#6258,#6259,#6260,#6261));
+#6258 = ORIENTED_EDGE('',*,*,#3869,.T.);
+#6259 = ORIENTED_EDGE('',*,*,#6070,.T.);
+#6260 = ORIENTED_EDGE('',*,*,#3795,.F.);
+#6261 = ORIENTED_EDGE('',*,*,#6245,.F.);
+#6262 = PLANE('',#6263);
+#6263 = AXIS2_PLACEMENT_3D('',#6264,#6265,#6266);
+#6264 = CARTESIAN_POINT('',(0.125,-2.5,0.));
+#6265 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6266 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6267 = ADVANCED_FACE('',(#6268),#6279,.F.);
+#6268 = FACE_BOUND('',#6269,.F.);
+#6269 = EDGE_LOOP('',(#6270,#6271,#6272,#6273));
+#6270 = ORIENTED_EDGE('',*,*,#3883,.T.);
+#6271 = ORIENTED_EDGE('',*,*,#3923,.T.);
+#6272 = ORIENTED_EDGE('',*,*,#3948,.T.);
+#6273 = ORIENTED_EDGE('',*,*,#6274,.T.);
+#6274 = EDGE_CURVE('',#3949,#3884,#6275,.T.);
+#6275 = LINE('',#6276,#6277);
+#6276 = CARTESIAN_POINT('',(-0.375,-2.5,0.));
+#6277 = VECTOR('',#6278,1.);
+#6278 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6279 = PLANE('',#6280);
+#6280 = AXIS2_PLACEMENT_3D('',#6281,#6282,#6283);
+#6281 = CARTESIAN_POINT('',(-0.25,-2.324839749899,0.));
+#6282 = DIRECTION('',(0.,0.,1.));
+#6283 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6284 = ADVANCED_FACE('',(#6285),#6291,.F.);
+#6285 = FACE_BOUND('',#6286,.F.);
+#6286 = EDGE_LOOP('',(#6287,#6288,#6289,#6290));
+#6287 = ORIENTED_EDGE('',*,*,#3967,.T.);
+#6288 = ORIENTED_EDGE('',*,*,#6087,.T.);
+#6289 = ORIENTED_EDGE('',*,*,#3893,.F.);
+#6290 = ORIENTED_EDGE('',*,*,#6274,.F.);
+#6291 = PLANE('',#6292);
+#6292 = AXIS2_PLACEMENT_3D('',#6293,#6294,#6295);
+#6293 = CARTESIAN_POINT('',(-0.375,-2.5,0.));
+#6294 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6295 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6296 = ADVANCED_FACE('',(#6297),#6308,.F.);
+#6297 = FACE_BOUND('',#6298,.F.);
+#6298 = EDGE_LOOP('',(#6299,#6300,#6301,#6302));
+#6299 = ORIENTED_EDGE('',*,*,#3981,.T.);
+#6300 = ORIENTED_EDGE('',*,*,#4021,.T.);
+#6301 = ORIENTED_EDGE('',*,*,#4046,.T.);
+#6302 = ORIENTED_EDGE('',*,*,#6303,.T.);
+#6303 = EDGE_CURVE('',#4047,#3982,#6304,.T.);
+#6304 = LINE('',#6305,#6306);
+#6305 = CARTESIAN_POINT('',(-0.875,-2.5,0.));
+#6306 = VECTOR('',#6307,1.);
+#6307 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6308 = PLANE('',#6309);
+#6309 = AXIS2_PLACEMENT_3D('',#6310,#6311,#6312);
+#6310 = CARTESIAN_POINT('',(-0.75,-2.324839749899,0.));
+#6311 = DIRECTION('',(0.,0.,1.));
+#6312 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6313 = ADVANCED_FACE('',(#6314),#6320,.F.);
+#6314 = FACE_BOUND('',#6315,.F.);
+#6315 = EDGE_LOOP('',(#6316,#6317,#6318,#6319));
+#6316 = ORIENTED_EDGE('',*,*,#4065,.T.);
+#6317 = ORIENTED_EDGE('',*,*,#6104,.T.);
+#6318 = ORIENTED_EDGE('',*,*,#3991,.F.);
+#6319 = ORIENTED_EDGE('',*,*,#6303,.F.);
+#6320 = PLANE('',#6321);
+#6321 = AXIS2_PLACEMENT_3D('',#6322,#6323,#6324);
+#6322 = CARTESIAN_POINT('',(-0.875,-2.5,0.));
+#6323 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6324 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6325 = ADVANCED_FACE('',(#6326),#6337,.F.);
+#6326 = FACE_BOUND('',#6327,.F.);
+#6327 = EDGE_LOOP('',(#6328,#6329,#6330,#6331));
+#6328 = ORIENTED_EDGE('',*,*,#4079,.T.);
+#6329 = ORIENTED_EDGE('',*,*,#4119,.T.);
+#6330 = ORIENTED_EDGE('',*,*,#4144,.T.);
+#6331 = ORIENTED_EDGE('',*,*,#6332,.T.);
+#6332 = EDGE_CURVE('',#4145,#4080,#6333,.T.);
+#6333 = LINE('',#6334,#6335);
+#6334 = CARTESIAN_POINT('',(-1.375,-2.5,0.));
+#6335 = VECTOR('',#6336,1.);
+#6336 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6337 = PLANE('',#6338);
+#6338 = AXIS2_PLACEMENT_3D('',#6339,#6340,#6341);
+#6339 = CARTESIAN_POINT('',(-1.25,-2.324839749899,0.));
+#6340 = DIRECTION('',(0.,0.,1.));
+#6341 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6342 = ADVANCED_FACE('',(#6343),#6349,.F.);
+#6343 = FACE_BOUND('',#6344,.F.);
+#6344 = EDGE_LOOP('',(#6345,#6346,#6347,#6348));
+#6345 = ORIENTED_EDGE('',*,*,#4163,.T.);
+#6346 = ORIENTED_EDGE('',*,*,#6121,.T.);
+#6347 = ORIENTED_EDGE('',*,*,#4089,.F.);
+#6348 = ORIENTED_EDGE('',*,*,#6332,.F.);
+#6349 = PLANE('',#6350);
+#6350 = AXIS2_PLACEMENT_3D('',#6351,#6352,#6353);
+#6351 = CARTESIAN_POINT('',(-1.375,-2.5,0.));
+#6352 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6353 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6354 = ADVANCED_FACE('',(#6355),#6366,.F.);
+#6355 = FACE_BOUND('',#6356,.F.);
+#6356 = EDGE_LOOP('',(#6357,#6358,#6359,#6360));
+#6357 = ORIENTED_EDGE('',*,*,#4177,.T.);
+#6358 = ORIENTED_EDGE('',*,*,#4217,.T.);
+#6359 = ORIENTED_EDGE('',*,*,#4242,.T.);
+#6360 = ORIENTED_EDGE('',*,*,#6361,.T.);
+#6361 = EDGE_CURVE('',#4243,#4178,#6362,.T.);
+#6362 = LINE('',#6363,#6364);
+#6363 = CARTESIAN_POINT('',(-1.875,-2.5,0.));
+#6364 = VECTOR('',#6365,1.);
+#6365 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6366 = PLANE('',#6367);
+#6367 = AXIS2_PLACEMENT_3D('',#6368,#6369,#6370);
+#6368 = CARTESIAN_POINT('',(-1.75,-2.324839749899,0.));
+#6369 = DIRECTION('',(0.,0.,1.));
+#6370 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6371 = ADVANCED_FACE('',(#6372),#6378,.F.);
+#6372 = FACE_BOUND('',#6373,.F.);
+#6373 = EDGE_LOOP('',(#6374,#6375,#6376,#6377));
+#6374 = ORIENTED_EDGE('',*,*,#4261,.T.);
+#6375 = ORIENTED_EDGE('',*,*,#6138,.T.);
+#6376 = ORIENTED_EDGE('',*,*,#4187,.F.);
+#6377 = ORIENTED_EDGE('',*,*,#6361,.F.);
+#6378 = PLANE('',#6379);
+#6379 = AXIS2_PLACEMENT_3D('',#6380,#6381,#6382);
+#6380 = CARTESIAN_POINT('',(-1.875,-2.5,0.));
+#6381 = DIRECTION('',(5.665538897648E-16,1.,0.));
+#6382 = DIRECTION('',(1.,-5.665538897648E-16,0.));
+#6383 = ADVANCED_FACE('',(#6384),#6395,.T.);
+#6384 = FACE_BOUND('',#6385,.T.);
+#6385 = EDGE_LOOP('',(#6386,#6392,#6393,#6394));
+#6386 = ORIENTED_EDGE('',*,*,#6387,.T.);
+#6387 = EDGE_CURVE('',#5239,#5173,#6388,.T.);
+#6388 = LINE('',#6389,#6390);
+#6389 = CARTESIAN_POINT('',(-2.5,1.875,0.2));
+#6390 = VECTOR('',#6391,1.);
+#6391 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6392 = ORIENTED_EDGE('',*,*,#5180,.T.);
+#6393 = ORIENTED_EDGE('',*,*,#4454,.F.);
+#6394 = ORIENTED_EDGE('',*,*,#5238,.T.);
+#6395 = PLANE('',#6396);
+#6396 = AXIS2_PLACEMENT_3D('',#6397,#6398,#6399);
+#6397 = CARTESIAN_POINT('',(-2.324839749899,1.75,0.2));
+#6398 = DIRECTION('',(0.,0.,1.));
+#6399 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6400 = ADVANCED_FACE('',(#6401),#6412,.T.);
+#6401 = FACE_BOUND('',#6402,.T.);
+#6402 = EDGE_LOOP('',(#6403,#6409,#6410,#6411));
+#6403 = ORIENTED_EDGE('',*,*,#6404,.T.);
+#6404 = EDGE_CURVE('',#5141,#5075,#6405,.T.);
+#6405 = LINE('',#6406,#6407);
+#6406 = CARTESIAN_POINT('',(-2.5,1.375,0.2));
+#6407 = VECTOR('',#6408,1.);
+#6408 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6409 = ORIENTED_EDGE('',*,*,#5082,.T.);
+#6410 = ORIENTED_EDGE('',*,*,#4431,.F.);
+#6411 = ORIENTED_EDGE('',*,*,#5140,.T.);
+#6412 = PLANE('',#6413);
+#6413 = AXIS2_PLACEMENT_3D('',#6414,#6415,#6416);
+#6414 = CARTESIAN_POINT('',(-2.324839749899,1.25,0.2));
+#6415 = DIRECTION('',(0.,0.,1.));
+#6416 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6417 = ADVANCED_FACE('',(#6418),#6429,.T.);
+#6418 = FACE_BOUND('',#6419,.T.);
+#6419 = EDGE_LOOP('',(#6420,#6426,#6427,#6428));
+#6420 = ORIENTED_EDGE('',*,*,#6421,.T.);
+#6421 = EDGE_CURVE('',#5043,#4977,#6422,.T.);
+#6422 = LINE('',#6423,#6424);
+#6423 = CARTESIAN_POINT('',(-2.5,0.875,0.2));
+#6424 = VECTOR('',#6425,1.);
+#6425 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6426 = ORIENTED_EDGE('',*,*,#4984,.T.);
+#6427 = ORIENTED_EDGE('',*,*,#4408,.F.);
+#6428 = ORIENTED_EDGE('',*,*,#5042,.T.);
+#6429 = PLANE('',#6430);
+#6430 = AXIS2_PLACEMENT_3D('',#6431,#6432,#6433);
+#6431 = CARTESIAN_POINT('',(-2.324839749899,0.75,0.2));
+#6432 = DIRECTION('',(0.,0.,1.));
+#6433 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6434 = ADVANCED_FACE('',(#6435),#6446,.T.);
+#6435 = FACE_BOUND('',#6436,.T.);
+#6436 = EDGE_LOOP('',(#6437,#6443,#6444,#6445));
+#6437 = ORIENTED_EDGE('',*,*,#6438,.T.);
+#6438 = EDGE_CURVE('',#4945,#4879,#6439,.T.);
+#6439 = LINE('',#6440,#6441);
+#6440 = CARTESIAN_POINT('',(-2.5,0.375,0.2));
+#6441 = VECTOR('',#6442,1.);
+#6442 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6443 = ORIENTED_EDGE('',*,*,#4886,.T.);
+#6444 = ORIENTED_EDGE('',*,*,#4385,.F.);
+#6445 = ORIENTED_EDGE('',*,*,#4944,.T.);
+#6446 = PLANE('',#6447);
+#6447 = AXIS2_PLACEMENT_3D('',#6448,#6449,#6450);
+#6448 = CARTESIAN_POINT('',(-2.324839749899,0.25,0.2));
+#6449 = DIRECTION('',(0.,0.,1.));
+#6450 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6451 = ADVANCED_FACE('',(#6452),#6463,.T.);
+#6452 = FACE_BOUND('',#6453,.T.);
+#6453 = EDGE_LOOP('',(#6454,#6460,#6461,#6462));
+#6454 = ORIENTED_EDGE('',*,*,#6455,.T.);
+#6455 = EDGE_CURVE('',#4847,#4781,#6456,.T.);
+#6456 = LINE('',#6457,#6458);
+#6457 = CARTESIAN_POINT('',(-2.5,-0.125,0.2));
+#6458 = VECTOR('',#6459,1.);
+#6459 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6460 = ORIENTED_EDGE('',*,*,#4788,.T.);
+#6461 = ORIENTED_EDGE('',*,*,#4362,.F.);
+#6462 = ORIENTED_EDGE('',*,*,#4846,.T.);
+#6463 = PLANE('',#6464);
+#6464 = AXIS2_PLACEMENT_3D('',#6465,#6466,#6467);
+#6465 = CARTESIAN_POINT('',(-2.324839749899,-0.25,0.2));
+#6466 = DIRECTION('',(0.,0.,1.));
+#6467 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6468 = ADVANCED_FACE('',(#6469),#6480,.T.);
+#6469 = FACE_BOUND('',#6470,.T.);
+#6470 = EDGE_LOOP('',(#6471,#6477,#6478,#6479));
+#6471 = ORIENTED_EDGE('',*,*,#6472,.T.);
+#6472 = EDGE_CURVE('',#4749,#4683,#6473,.T.);
+#6473 = LINE('',#6474,#6475);
+#6474 = CARTESIAN_POINT('',(-2.5,-0.625,0.2));
+#6475 = VECTOR('',#6476,1.);
+#6476 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6477 = ORIENTED_EDGE('',*,*,#4690,.T.);
+#6478 = ORIENTED_EDGE('',*,*,#4339,.F.);
+#6479 = ORIENTED_EDGE('',*,*,#4748,.T.);
+#6480 = PLANE('',#6481);
+#6481 = AXIS2_PLACEMENT_3D('',#6482,#6483,#6484);
+#6482 = CARTESIAN_POINT('',(-2.324839749899,-0.75,0.2));
+#6483 = DIRECTION('',(0.,0.,1.));
+#6484 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6485 = ADVANCED_FACE('',(#6486),#6497,.T.);
+#6486 = FACE_BOUND('',#6487,.T.);
+#6487 = EDGE_LOOP('',(#6488,#6494,#6495,#6496));
+#6488 = ORIENTED_EDGE('',*,*,#6489,.T.);
+#6489 = EDGE_CURVE('',#4651,#4585,#6490,.T.);
+#6490 = LINE('',#6491,#6492);
+#6491 = CARTESIAN_POINT('',(-2.5,-1.125,0.2));
+#6492 = VECTOR('',#6493,1.);
+#6493 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6494 = ORIENTED_EDGE('',*,*,#4592,.T.);
+#6495 = ORIENTED_EDGE('',*,*,#4316,.F.);
+#6496 = ORIENTED_EDGE('',*,*,#4650,.T.);
+#6497 = PLANE('',#6498);
+#6498 = AXIS2_PLACEMENT_3D('',#6499,#6500,#6501);
+#6499 = CARTESIAN_POINT('',(-2.324839749899,-1.25,0.2));
+#6500 = DIRECTION('',(0.,0.,1.));
+#6501 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6502 = ADVANCED_FACE('',(#6503),#6514,.T.);
+#6503 = FACE_BOUND('',#6504,.T.);
+#6504 = EDGE_LOOP('',(#6505,#6511,#6512,#6513));
+#6505 = ORIENTED_EDGE('',*,*,#6506,.T.);
+#6506 = EDGE_CURVE('',#4553,#4487,#6507,.T.);
+#6507 = LINE('',#6508,#6509);
+#6508 = CARTESIAN_POINT('',(-2.5,-1.625,0.2));
+#6509 = VECTOR('',#6510,1.);
+#6510 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6511 = ORIENTED_EDGE('',*,*,#4494,.T.);
+#6512 = ORIENTED_EDGE('',*,*,#4293,.F.);
+#6513 = ORIENTED_EDGE('',*,*,#4552,.T.);
+#6514 = PLANE('',#6515);
+#6515 = AXIS2_PLACEMENT_3D('',#6516,#6517,#6518);
+#6516 = CARTESIAN_POINT('',(-2.324839749899,-1.75,0.2));
+#6517 = DIRECTION('',(0.,0.,1.));
+#6518 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6519 = ADVANCED_FACE('',(#6520),#6531,.F.);
+#6520 = FACE_BOUND('',#6521,.F.);
+#6521 = EDGE_LOOP('',(#6522,#6523,#6524,#6525));
+#6522 = ORIENTED_EDGE('',*,*,#4476,.T.);
+#6523 = ORIENTED_EDGE('',*,*,#4516,.T.);
+#6524 = ORIENTED_EDGE('',*,*,#4541,.T.);
+#6525 = ORIENTED_EDGE('',*,*,#6526,.T.);
+#6526 = EDGE_CURVE('',#4542,#4477,#6527,.T.);
+#6527 = LINE('',#6528,#6529);
+#6528 = CARTESIAN_POINT('',(-2.5,-1.625,0.));
+#6529 = VECTOR('',#6530,1.);
+#6530 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6531 = PLANE('',#6532);
+#6532 = AXIS2_PLACEMENT_3D('',#6533,#6534,#6535);
+#6533 = CARTESIAN_POINT('',(-2.324839749899,-1.75,0.));
+#6534 = DIRECTION('',(0.,0.,1.));
+#6535 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6536 = ADVANCED_FACE('',(#6537),#6543,.F.);
+#6537 = FACE_BOUND('',#6538,.F.);
+#6538 = EDGE_LOOP('',(#6539,#6540,#6541,#6542));
+#6539 = ORIENTED_EDGE('',*,*,#4560,.T.);
+#6540 = ORIENTED_EDGE('',*,*,#6506,.T.);
+#6541 = ORIENTED_EDGE('',*,*,#4486,.F.);
+#6542 = ORIENTED_EDGE('',*,*,#6526,.F.);
+#6543 = PLANE('',#6544);
+#6544 = AXIS2_PLACEMENT_3D('',#6545,#6546,#6547);
+#6545 = CARTESIAN_POINT('',(-2.5,-1.625,0.));
+#6546 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6547 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6548 = ADVANCED_FACE('',(#6549),#6560,.F.);
+#6549 = FACE_BOUND('',#6550,.F.);
+#6550 = EDGE_LOOP('',(#6551,#6552,#6553,#6554));
+#6551 = ORIENTED_EDGE('',*,*,#4574,.T.);
+#6552 = ORIENTED_EDGE('',*,*,#4614,.T.);
+#6553 = ORIENTED_EDGE('',*,*,#4639,.T.);
+#6554 = ORIENTED_EDGE('',*,*,#6555,.T.);
+#6555 = EDGE_CURVE('',#4640,#4575,#6556,.T.);
+#6556 = LINE('',#6557,#6558);
+#6557 = CARTESIAN_POINT('',(-2.5,-1.125,0.));
+#6558 = VECTOR('',#6559,1.);
+#6559 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6560 = PLANE('',#6561);
+#6561 = AXIS2_PLACEMENT_3D('',#6562,#6563,#6564);
+#6562 = CARTESIAN_POINT('',(-2.324839749899,-1.25,0.));
+#6563 = DIRECTION('',(0.,0.,1.));
+#6564 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6565 = ADVANCED_FACE('',(#6566),#6572,.F.);
+#6566 = FACE_BOUND('',#6567,.F.);
+#6567 = EDGE_LOOP('',(#6568,#6569,#6570,#6571));
+#6568 = ORIENTED_EDGE('',*,*,#4658,.T.);
+#6569 = ORIENTED_EDGE('',*,*,#6489,.T.);
+#6570 = ORIENTED_EDGE('',*,*,#4584,.F.);
+#6571 = ORIENTED_EDGE('',*,*,#6555,.F.);
+#6572 = PLANE('',#6573);
+#6573 = AXIS2_PLACEMENT_3D('',#6574,#6575,#6576);
+#6574 = CARTESIAN_POINT('',(-2.5,-1.125,0.));
+#6575 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6576 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6577 = ADVANCED_FACE('',(#6578),#6589,.F.);
+#6578 = FACE_BOUND('',#6579,.F.);
+#6579 = EDGE_LOOP('',(#6580,#6581,#6582,#6583));
+#6580 = ORIENTED_EDGE('',*,*,#4672,.T.);
+#6581 = ORIENTED_EDGE('',*,*,#4712,.T.);
+#6582 = ORIENTED_EDGE('',*,*,#4737,.T.);
+#6583 = ORIENTED_EDGE('',*,*,#6584,.T.);
+#6584 = EDGE_CURVE('',#4738,#4673,#6585,.T.);
+#6585 = LINE('',#6586,#6587);
+#6586 = CARTESIAN_POINT('',(-2.5,-0.625,0.));
+#6587 = VECTOR('',#6588,1.);
+#6588 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6589 = PLANE('',#6590);
+#6590 = AXIS2_PLACEMENT_3D('',#6591,#6592,#6593);
+#6591 = CARTESIAN_POINT('',(-2.324839749899,-0.75,0.));
+#6592 = DIRECTION('',(0.,0.,1.));
+#6593 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6594 = ADVANCED_FACE('',(#6595),#6601,.F.);
+#6595 = FACE_BOUND('',#6596,.F.);
+#6596 = EDGE_LOOP('',(#6597,#6598,#6599,#6600));
+#6597 = ORIENTED_EDGE('',*,*,#4756,.T.);
+#6598 = ORIENTED_EDGE('',*,*,#6472,.T.);
+#6599 = ORIENTED_EDGE('',*,*,#4682,.F.);
+#6600 = ORIENTED_EDGE('',*,*,#6584,.F.);
+#6601 = PLANE('',#6602);
+#6602 = AXIS2_PLACEMENT_3D('',#6603,#6604,#6605);
+#6603 = CARTESIAN_POINT('',(-2.5,-0.625,0.));
+#6604 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6605 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6606 = ADVANCED_FACE('',(#6607),#6618,.F.);
+#6607 = FACE_BOUND('',#6608,.F.);
+#6608 = EDGE_LOOP('',(#6609,#6610,#6611,#6612));
+#6609 = ORIENTED_EDGE('',*,*,#4770,.T.);
+#6610 = ORIENTED_EDGE('',*,*,#4810,.T.);
+#6611 = ORIENTED_EDGE('',*,*,#4835,.T.);
+#6612 = ORIENTED_EDGE('',*,*,#6613,.T.);
+#6613 = EDGE_CURVE('',#4836,#4771,#6614,.T.);
+#6614 = LINE('',#6615,#6616);
+#6615 = CARTESIAN_POINT('',(-2.5,-0.125,0.));
+#6616 = VECTOR('',#6617,1.);
+#6617 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6618 = PLANE('',#6619);
+#6619 = AXIS2_PLACEMENT_3D('',#6620,#6621,#6622);
+#6620 = CARTESIAN_POINT('',(-2.324839749899,-0.25,0.));
+#6621 = DIRECTION('',(0.,0.,1.));
+#6622 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6623 = ADVANCED_FACE('',(#6624),#6630,.F.);
+#6624 = FACE_BOUND('',#6625,.F.);
+#6625 = EDGE_LOOP('',(#6626,#6627,#6628,#6629));
+#6626 = ORIENTED_EDGE('',*,*,#4854,.T.);
+#6627 = ORIENTED_EDGE('',*,*,#6455,.T.);
+#6628 = ORIENTED_EDGE('',*,*,#4780,.F.);
+#6629 = ORIENTED_EDGE('',*,*,#6613,.F.);
+#6630 = PLANE('',#6631);
+#6631 = AXIS2_PLACEMENT_3D('',#6632,#6633,#6634);
+#6632 = CARTESIAN_POINT('',(-2.5,-0.125,0.));
+#6633 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6634 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6635 = ADVANCED_FACE('',(#6636),#6647,.F.);
+#6636 = FACE_BOUND('',#6637,.F.);
+#6637 = EDGE_LOOP('',(#6638,#6639,#6640,#6641));
+#6638 = ORIENTED_EDGE('',*,*,#4868,.T.);
+#6639 = ORIENTED_EDGE('',*,*,#4908,.T.);
+#6640 = ORIENTED_EDGE('',*,*,#4933,.T.);
+#6641 = ORIENTED_EDGE('',*,*,#6642,.T.);
+#6642 = EDGE_CURVE('',#4934,#4869,#6643,.T.);
+#6643 = LINE('',#6644,#6645);
+#6644 = CARTESIAN_POINT('',(-2.5,0.375,0.));
+#6645 = VECTOR('',#6646,1.);
+#6646 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6647 = PLANE('',#6648);
+#6648 = AXIS2_PLACEMENT_3D('',#6649,#6650,#6651);
+#6649 = CARTESIAN_POINT('',(-2.324839749899,0.25,0.));
+#6650 = DIRECTION('',(0.,0.,1.));
+#6651 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6652 = ADVANCED_FACE('',(#6653),#6659,.F.);
+#6653 = FACE_BOUND('',#6654,.F.);
+#6654 = EDGE_LOOP('',(#6655,#6656,#6657,#6658));
+#6655 = ORIENTED_EDGE('',*,*,#4952,.T.);
+#6656 = ORIENTED_EDGE('',*,*,#6438,.T.);
+#6657 = ORIENTED_EDGE('',*,*,#4878,.F.);
+#6658 = ORIENTED_EDGE('',*,*,#6642,.F.);
+#6659 = PLANE('',#6660);
+#6660 = AXIS2_PLACEMENT_3D('',#6661,#6662,#6663);
+#6661 = CARTESIAN_POINT('',(-2.5,0.375,0.));
+#6662 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6663 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6664 = ADVANCED_FACE('',(#6665),#6676,.F.);
+#6665 = FACE_BOUND('',#6666,.F.);
+#6666 = EDGE_LOOP('',(#6667,#6668,#6669,#6670));
+#6667 = ORIENTED_EDGE('',*,*,#4966,.T.);
+#6668 = ORIENTED_EDGE('',*,*,#5006,.T.);
+#6669 = ORIENTED_EDGE('',*,*,#5031,.T.);
+#6670 = ORIENTED_EDGE('',*,*,#6671,.T.);
+#6671 = EDGE_CURVE('',#5032,#4967,#6672,.T.);
+#6672 = LINE('',#6673,#6674);
+#6673 = CARTESIAN_POINT('',(-2.5,0.875,0.));
+#6674 = VECTOR('',#6675,1.);
+#6675 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6676 = PLANE('',#6677);
+#6677 = AXIS2_PLACEMENT_3D('',#6678,#6679,#6680);
+#6678 = CARTESIAN_POINT('',(-2.324839749899,0.75,0.));
+#6679 = DIRECTION('',(0.,0.,1.));
+#6680 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6681 = ADVANCED_FACE('',(#6682),#6688,.F.);
+#6682 = FACE_BOUND('',#6683,.F.);
+#6683 = EDGE_LOOP('',(#6684,#6685,#6686,#6687));
+#6684 = ORIENTED_EDGE('',*,*,#5050,.T.);
+#6685 = ORIENTED_EDGE('',*,*,#6421,.T.);
+#6686 = ORIENTED_EDGE('',*,*,#4976,.F.);
+#6687 = ORIENTED_EDGE('',*,*,#6671,.F.);
+#6688 = PLANE('',#6689);
+#6689 = AXIS2_PLACEMENT_3D('',#6690,#6691,#6692);
+#6690 = CARTESIAN_POINT('',(-2.5,0.875,0.));
+#6691 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6692 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6693 = ADVANCED_FACE('',(#6694),#6705,.F.);
+#6694 = FACE_BOUND('',#6695,.F.);
+#6695 = EDGE_LOOP('',(#6696,#6697,#6698,#6699));
+#6696 = ORIENTED_EDGE('',*,*,#5064,.T.);
+#6697 = ORIENTED_EDGE('',*,*,#5104,.T.);
+#6698 = ORIENTED_EDGE('',*,*,#5129,.T.);
+#6699 = ORIENTED_EDGE('',*,*,#6700,.T.);
+#6700 = EDGE_CURVE('',#5130,#5065,#6701,.T.);
+#6701 = LINE('',#6702,#6703);
+#6702 = CARTESIAN_POINT('',(-2.5,1.375,0.));
+#6703 = VECTOR('',#6704,1.);
+#6704 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6705 = PLANE('',#6706);
+#6706 = AXIS2_PLACEMENT_3D('',#6707,#6708,#6709);
+#6707 = CARTESIAN_POINT('',(-2.324839749899,1.25,0.));
+#6708 = DIRECTION('',(0.,0.,1.));
+#6709 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6710 = ADVANCED_FACE('',(#6711),#6717,.F.);
+#6711 = FACE_BOUND('',#6712,.F.);
+#6712 = EDGE_LOOP('',(#6713,#6714,#6715,#6716));
+#6713 = ORIENTED_EDGE('',*,*,#5148,.T.);
+#6714 = ORIENTED_EDGE('',*,*,#6404,.T.);
+#6715 = ORIENTED_EDGE('',*,*,#5074,.F.);
+#6716 = ORIENTED_EDGE('',*,*,#6700,.F.);
+#6717 = PLANE('',#6718);
+#6718 = AXIS2_PLACEMENT_3D('',#6719,#6720,#6721);
+#6719 = CARTESIAN_POINT('',(-2.5,1.375,0.));
+#6720 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6721 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6722 = ADVANCED_FACE('',(#6723),#6734,.F.);
+#6723 = FACE_BOUND('',#6724,.F.);
+#6724 = EDGE_LOOP('',(#6725,#6726,#6727,#6728));
+#6725 = ORIENTED_EDGE('',*,*,#5162,.T.);
+#6726 = ORIENTED_EDGE('',*,*,#5202,.T.);
+#6727 = ORIENTED_EDGE('',*,*,#5227,.T.);
+#6728 = ORIENTED_EDGE('',*,*,#6729,.T.);
+#6729 = EDGE_CURVE('',#5228,#5163,#6730,.T.);
+#6730 = LINE('',#6731,#6732);
+#6731 = CARTESIAN_POINT('',(-2.5,1.875,0.));
+#6732 = VECTOR('',#6733,1.);
+#6733 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6734 = PLANE('',#6735);
+#6735 = AXIS2_PLACEMENT_3D('',#6736,#6737,#6738);
+#6736 = CARTESIAN_POINT('',(-2.324839749899,1.75,0.));
+#6737 = DIRECTION('',(0.,0.,1.));
+#6738 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6739 = ADVANCED_FACE('',(#6740),#6746,.F.);
+#6740 = FACE_BOUND('',#6741,.F.);
+#6741 = EDGE_LOOP('',(#6742,#6743,#6744,#6745));
+#6742 = ORIENTED_EDGE('',*,*,#5246,.T.);
+#6743 = ORIENTED_EDGE('',*,*,#6387,.T.);
+#6744 = ORIENTED_EDGE('',*,*,#5172,.F.);
+#6745 = ORIENTED_EDGE('',*,*,#6729,.F.);
+#6746 = PLANE('',#6747);
+#6747 = AXIS2_PLACEMENT_3D('',#6748,#6749,#6750);
+#6748 = CARTESIAN_POINT('',(-2.5,1.875,0.));
+#6749 = DIRECTION('',(1.,-4.669739647545E-16,0.));
+#6750 = DIRECTION('',(-4.669739647545E-16,-1.,0.));
+#6751 = ADVANCED_FACE('',(#6752),#6771,.F.);
+#6752 = FACE_BOUND('',#6753,.T.);
+#6753 = EDGE_LOOP('',(#6754,#6755,#6763,#6770));
+#6754 = ORIENTED_EDGE('',*,*,#5266,.F.);
+#6755 = ORIENTED_EDGE('',*,*,#6756,.T.);
+#6756 = EDGE_CURVE('',#5267,#6757,#6759,.T.);
+#6757 = VERTEX_POINT('',#6758);
+#6758 = CARTESIAN_POINT('',(-1.9,1.65,0.865));
+#6759 = LINE('',#6760,#6761);
+#6760 = CARTESIAN_POINT('',(-1.9,1.65,0.885));
+#6761 = VECTOR('',#6762,1.);
+#6762 = DIRECTION('',(-0.,0.,-1.));
+#6763 = ORIENTED_EDGE('',*,*,#6764,.F.);
+#6764 = EDGE_CURVE('',#6757,#6757,#6765,.T.);
+#6765 = CIRCLE('',#6766,0.25);
+#6766 = AXIS2_PLACEMENT_3D('',#6767,#6768,#6769);
+#6767 = CARTESIAN_POINT('',(-1.9,1.9,0.865));
+#6768 = DIRECTION('',(-0.,0.,1.));
+#6769 = DIRECTION('',(6.661338147751E-16,-1.,0.));
+#6770 = ORIENTED_EDGE('',*,*,#6756,.F.);
+#6771 = CYLINDRICAL_SURFACE('',#6772,0.25);
+#6772 = AXIS2_PLACEMENT_3D('',#6773,#6774,#6775);
+#6773 = CARTESIAN_POINT('',(-1.9,1.9,0.885));
+#6774 = DIRECTION('',(0.,0.,-1.));
+#6775 = DIRECTION('',(6.661338147751E-16,-1.,0.));
+#6776 = ADVANCED_FACE('',(#6777),#6780,.T.);
+#6777 = FACE_BOUND('',#6778,.T.);
+#6778 = EDGE_LOOP('',(#6779));
+#6779 = ORIENTED_EDGE('',*,*,#6764,.T.);
+#6780 = PLANE('',#6781);
+#6781 = AXIS2_PLACEMENT_3D('',#6782,#6783,#6784);
+#6782 = CARTESIAN_POINT('',(-1.9,1.9,0.865));
+#6783 = DIRECTION('',(0.,0.,1.));
+#6784 = DIRECTION('',(6.661338147751E-16,-1.,0.));
+#6785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6789))
+GLOBAL_UNIT_ASSIGNED_CONTEXT((#6786,#6787,#6788)) REPRESENTATION_CONTEXT
+('Context #1','3D Context with UNIT and UNCERTAINTY') );
+#6786 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#6787 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#6788 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#6789 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-07),#6786,
+'distance_accuracy_value','confusion accuracy');
+#6790 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));
+#6791 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(
+#6792,#6800,#6807,#6814,#6822,#6829,#6836,#6843,#6850,#6857,#6864,
+#6871,#6878,#6885,#6892,#6899,#6906,#6913,#6920,#6927,#6934,#6941,
+#6948,#6955,#6962,#6969,#6976,#6983,#6990,#6997,#7004,#7011,#7018,
+#7025,#7032,#7039,#7046,#7053,#7060,#7067,#7074,#7081,#7088,#7095,
+#7102,#7109,#7116,#7123,#7130,#7137,#7144,#7151,#7158,#7165,#7172,
+#7179,#7186,#7193,#7200,#7207,#7214,#7221,#7228,#7235,#7242,#7249,
+#7256,#7263,#7270,#7277,#7284,#7291,#7298,#7305,#7312,#7319,#7326,
+#7333,#7340,#7347,#7354,#7361,#7368,#7375,#7382,#7389,#7396,#7403,
+#7410,#7417,#7424,#7431,#7438,#7445,#7452,#7459,#7466,#7473,#7480,
+#7487,#7494,#7501,#7508,#7515,#7522,#7529,#7536,#7543,#7550,#7557,
+#7564,#7571,#7578,#7585,#7592,#7599,#7606,#7613,#7620,#7627,#7634,
+#7641,#7648,#7655,#7662,#7669,#7676,#7683,#7690,#7697,#7704,#7711,
+#7718,#7725,#7732,#7739,#7746,#7753,#7760,#7767,#7774,#7781,#7788,
+#7795,#7802,#7809,#7816,#7823,#7830,#7837,#7844,#7851,#7858,#7865,
+#7872,#7879,#7886,#7893,#7900,#7907,#7914,#7921,#7928,#7935,#7942,
+#7949,#7956,#7963,#7970,#7977,#7984,#7991,#7998,#8005,#8012,#8019,
+#8026,#8033,#8040,#8047,#8054,#8061,#8068,#8075,#8082,#8089,#8096,
+#8103,#8110,#8117,#8124,#8131,#8138,#8145,#8152,#8159,#8166,#8173,
+#8180,#8187,#8194,#8201,#8208,#8215,#8222,#8230),#6785);
+#6792 = STYLED_ITEM('color',(#6793),#17);
+#6793 = PRESENTATION_STYLE_ASSIGNMENT((#6794));
+#6794 = SURFACE_STYLE_USAGE(.BOTH.,#6795);
+#6795 = SURFACE_SIDE_STYLE('',(#6796));
+#6796 = SURFACE_STYLE_FILL_AREA(#6797);
+#6797 = FILL_AREA_STYLE('',(#6798));
+#6798 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6799 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812);
+#6800 = STYLED_ITEM('color',(#6801),#57);
+#6801 = PRESENTATION_STYLE_ASSIGNMENT((#6802));
+#6802 = SURFACE_STYLE_USAGE(.BOTH.,#6803);
+#6803 = SURFACE_SIDE_STYLE('',(#6804));
+#6804 = SURFACE_STYLE_FILL_AREA(#6805);
+#6805 = FILL_AREA_STYLE('',(#6806));
+#6806 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6807 = STYLED_ITEM('color',(#6808),#96);
+#6808 = PRESENTATION_STYLE_ASSIGNMENT((#6809));
+#6809 = SURFACE_STYLE_USAGE(.BOTH.,#6810);
+#6810 = SURFACE_SIDE_STYLE('',(#6811));
+#6811 = SURFACE_STYLE_FILL_AREA(#6812);
+#6812 = FILL_AREA_STYLE('',(#6813));
+#6813 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6814 = STYLED_ITEM('color',(#6815),#120);
+#6815 = PRESENTATION_STYLE_ASSIGNMENT((#6816));
+#6816 = SURFACE_STYLE_USAGE(.BOTH.,#6817);
+#6817 = SURFACE_SIDE_STYLE('',(#6818));
+#6818 = SURFACE_STYLE_FILL_AREA(#6819);
+#6819 = FILL_AREA_STYLE('',(#6820));
+#6820 = FILL_AREA_STYLE_COLOUR('',#6821);
+#6821 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828);
+#6822 = STYLED_ITEM('color',(#6823),#1242);
+#6823 = PRESENTATION_STYLE_ASSIGNMENT((#6824));
+#6824 = SURFACE_STYLE_USAGE(.BOTH.,#6825);
+#6825 = SURFACE_SIDE_STYLE('',(#6826));
+#6826 = SURFACE_STYLE_FILL_AREA(#6827);
+#6827 = FILL_AREA_STYLE('',(#6828));
+#6828 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6829 = STYLED_ITEM('color',(#6830),#1259);
+#6830 = PRESENTATION_STYLE_ASSIGNMENT((#6831));
+#6831 = SURFACE_STYLE_USAGE(.BOTH.,#6832);
+#6832 = SURFACE_SIDE_STYLE('',(#6833));
+#6833 = SURFACE_STYLE_FILL_AREA(#6834);
+#6834 = FILL_AREA_STYLE('',(#6835));
+#6835 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6836 = STYLED_ITEM('color',(#6837),#1276);
+#6837 = PRESENTATION_STYLE_ASSIGNMENT((#6838));
+#6838 = SURFACE_STYLE_USAGE(.BOTH.,#6839);
+#6839 = SURFACE_SIDE_STYLE('',(#6840));
+#6840 = SURFACE_STYLE_FILL_AREA(#6841);
+#6841 = FILL_AREA_STYLE('',(#6842));
+#6842 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6843 = STYLED_ITEM('color',(#6844),#1288);
+#6844 = PRESENTATION_STYLE_ASSIGNMENT((#6845));
+#6845 = SURFACE_STYLE_USAGE(.BOTH.,#6846);
+#6846 = SURFACE_SIDE_STYLE('',(#6847));
+#6847 = SURFACE_STYLE_FILL_AREA(#6848);
+#6848 = FILL_AREA_STYLE('',(#6849));
+#6849 = FILL_AREA_STYLE_COLOUR('',#6821);
+#6850 = STYLED_ITEM('color',(#6851),#1503);
+#6851 = PRESENTATION_STYLE_ASSIGNMENT((#6852));
+#6852 = SURFACE_STYLE_USAGE(.BOTH.,#6853);
+#6853 = SURFACE_SIDE_STYLE('',(#6854));
+#6854 = SURFACE_STYLE_FILL_AREA(#6855);
+#6855 = FILL_AREA_STYLE('',(#6856));
+#6856 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6857 = STYLED_ITEM('color',(#6858),#1543);
+#6858 = PRESENTATION_STYLE_ASSIGNMENT((#6859));
+#6859 = SURFACE_STYLE_USAGE(.BOTH.,#6860);
+#6860 = SURFACE_SIDE_STYLE('',(#6861));
+#6861 = SURFACE_STYLE_FILL_AREA(#6862);
+#6862 = FILL_AREA_STYLE('',(#6863));
+#6863 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6864 = STYLED_ITEM('color',(#6865),#1568);
+#6865 = PRESENTATION_STYLE_ASSIGNMENT((#6866));
+#6866 = SURFACE_STYLE_USAGE(.BOTH.,#6867);
+#6867 = SURFACE_SIDE_STYLE('',(#6868));
+#6868 = SURFACE_STYLE_FILL_AREA(#6869);
+#6869 = FILL_AREA_STYLE('',(#6870));
+#6870 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6871 = STYLED_ITEM('color',(#6872),#1601);
+#6872 = PRESENTATION_STYLE_ASSIGNMENT((#6873));
+#6873 = SURFACE_STYLE_USAGE(.BOTH.,#6874);
+#6874 = SURFACE_SIDE_STYLE('',(#6875));
+#6875 = SURFACE_STYLE_FILL_AREA(#6876);
+#6876 = FILL_AREA_STYLE('',(#6877));
+#6877 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6878 = STYLED_ITEM('color',(#6879),#1641);
+#6879 = PRESENTATION_STYLE_ASSIGNMENT((#6880));
+#6880 = SURFACE_STYLE_USAGE(.BOTH.,#6881);
+#6881 = SURFACE_SIDE_STYLE('',(#6882));
+#6882 = SURFACE_STYLE_FILL_AREA(#6883);
+#6883 = FILL_AREA_STYLE('',(#6884));
+#6884 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6885 = STYLED_ITEM('color',(#6886),#1666);
+#6886 = PRESENTATION_STYLE_ASSIGNMENT((#6887));
+#6887 = SURFACE_STYLE_USAGE(.BOTH.,#6888);
+#6888 = SURFACE_SIDE_STYLE('',(#6889));
+#6889 = SURFACE_STYLE_FILL_AREA(#6890);
+#6890 = FILL_AREA_STYLE('',(#6891));
+#6891 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6892 = STYLED_ITEM('color',(#6893),#1699);
+#6893 = PRESENTATION_STYLE_ASSIGNMENT((#6894));
+#6894 = SURFACE_STYLE_USAGE(.BOTH.,#6895);
+#6895 = SURFACE_SIDE_STYLE('',(#6896));
+#6896 = SURFACE_STYLE_FILL_AREA(#6897);
+#6897 = FILL_AREA_STYLE('',(#6898));
+#6898 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6899 = STYLED_ITEM('color',(#6900),#1739);
+#6900 = PRESENTATION_STYLE_ASSIGNMENT((#6901));
+#6901 = SURFACE_STYLE_USAGE(.BOTH.,#6902);
+#6902 = SURFACE_SIDE_STYLE('',(#6903));
+#6903 = SURFACE_STYLE_FILL_AREA(#6904);
+#6904 = FILL_AREA_STYLE('',(#6905));
+#6905 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6906 = STYLED_ITEM('color',(#6907),#1764);
+#6907 = PRESENTATION_STYLE_ASSIGNMENT((#6908));
+#6908 = SURFACE_STYLE_USAGE(.BOTH.,#6909);
+#6909 = SURFACE_SIDE_STYLE('',(#6910));
+#6910 = SURFACE_STYLE_FILL_AREA(#6911);
+#6911 = FILL_AREA_STYLE('',(#6912));
+#6912 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6913 = STYLED_ITEM('color',(#6914),#1797);
+#6914 = PRESENTATION_STYLE_ASSIGNMENT((#6915));
+#6915 = SURFACE_STYLE_USAGE(.BOTH.,#6916);
+#6916 = SURFACE_SIDE_STYLE('',(#6917));
+#6917 = SURFACE_STYLE_FILL_AREA(#6918);
+#6918 = FILL_AREA_STYLE('',(#6919));
+#6919 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6920 = STYLED_ITEM('color',(#6921),#1837);
+#6921 = PRESENTATION_STYLE_ASSIGNMENT((#6922));
+#6922 = SURFACE_STYLE_USAGE(.BOTH.,#6923);
+#6923 = SURFACE_SIDE_STYLE('',(#6924));
+#6924 = SURFACE_STYLE_FILL_AREA(#6925);
+#6925 = FILL_AREA_STYLE('',(#6926));
+#6926 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6927 = STYLED_ITEM('color',(#6928),#1862);
+#6928 = PRESENTATION_STYLE_ASSIGNMENT((#6929));
+#6929 = SURFACE_STYLE_USAGE(.BOTH.,#6930);
+#6930 = SURFACE_SIDE_STYLE('',(#6931));
+#6931 = SURFACE_STYLE_FILL_AREA(#6932);
+#6932 = FILL_AREA_STYLE('',(#6933));
+#6933 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6934 = STYLED_ITEM('color',(#6935),#1895);
+#6935 = PRESENTATION_STYLE_ASSIGNMENT((#6936));
+#6936 = SURFACE_STYLE_USAGE(.BOTH.,#6937);
+#6937 = SURFACE_SIDE_STYLE('',(#6938));
+#6938 = SURFACE_STYLE_FILL_AREA(#6939);
+#6939 = FILL_AREA_STYLE('',(#6940));
+#6940 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6941 = STYLED_ITEM('color',(#6942),#1935);
+#6942 = PRESENTATION_STYLE_ASSIGNMENT((#6943));
+#6943 = SURFACE_STYLE_USAGE(.BOTH.,#6944);
+#6944 = SURFACE_SIDE_STYLE('',(#6945));
+#6945 = SURFACE_STYLE_FILL_AREA(#6946);
+#6946 = FILL_AREA_STYLE('',(#6947));
+#6947 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6948 = STYLED_ITEM('color',(#6949),#1960);
+#6949 = PRESENTATION_STYLE_ASSIGNMENT((#6950));
+#6950 = SURFACE_STYLE_USAGE(.BOTH.,#6951);
+#6951 = SURFACE_SIDE_STYLE('',(#6952));
+#6952 = SURFACE_STYLE_FILL_AREA(#6953);
+#6953 = FILL_AREA_STYLE('',(#6954));
+#6954 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6955 = STYLED_ITEM('color',(#6956),#1993);
+#6956 = PRESENTATION_STYLE_ASSIGNMENT((#6957));
+#6957 = SURFACE_STYLE_USAGE(.BOTH.,#6958);
+#6958 = SURFACE_SIDE_STYLE('',(#6959));
+#6959 = SURFACE_STYLE_FILL_AREA(#6960);
+#6960 = FILL_AREA_STYLE('',(#6961));
+#6961 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6962 = STYLED_ITEM('color',(#6963),#2033);
+#6963 = PRESENTATION_STYLE_ASSIGNMENT((#6964));
+#6964 = SURFACE_STYLE_USAGE(.BOTH.,#6965);
+#6965 = SURFACE_SIDE_STYLE('',(#6966));
+#6966 = SURFACE_STYLE_FILL_AREA(#6967);
+#6967 = FILL_AREA_STYLE('',(#6968));
+#6968 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6969 = STYLED_ITEM('color',(#6970),#2058);
+#6970 = PRESENTATION_STYLE_ASSIGNMENT((#6971));
+#6971 = SURFACE_STYLE_USAGE(.BOTH.,#6972);
+#6972 = SURFACE_SIDE_STYLE('',(#6973));
+#6973 = SURFACE_STYLE_FILL_AREA(#6974);
+#6974 = FILL_AREA_STYLE('',(#6975));
+#6975 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6976 = STYLED_ITEM('color',(#6977),#2091);
+#6977 = PRESENTATION_STYLE_ASSIGNMENT((#6978));
+#6978 = SURFACE_STYLE_USAGE(.BOTH.,#6979);
+#6979 = SURFACE_SIDE_STYLE('',(#6980));
+#6980 = SURFACE_STYLE_FILL_AREA(#6981);
+#6981 = FILL_AREA_STYLE('',(#6982));
+#6982 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6983 = STYLED_ITEM('color',(#6984),#2131);
+#6984 = PRESENTATION_STYLE_ASSIGNMENT((#6985));
+#6985 = SURFACE_STYLE_USAGE(.BOTH.,#6986);
+#6986 = SURFACE_SIDE_STYLE('',(#6987));
+#6987 = SURFACE_STYLE_FILL_AREA(#6988);
+#6988 = FILL_AREA_STYLE('',(#6989));
+#6989 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6990 = STYLED_ITEM('color',(#6991),#2156);
+#6991 = PRESENTATION_STYLE_ASSIGNMENT((#6992));
+#6992 = SURFACE_STYLE_USAGE(.BOTH.,#6993);
+#6993 = SURFACE_SIDE_STYLE('',(#6994));
+#6994 = SURFACE_STYLE_FILL_AREA(#6995);
+#6995 = FILL_AREA_STYLE('',(#6996));
+#6996 = FILL_AREA_STYLE_COLOUR('',#6799);
+#6997 = STYLED_ITEM('color',(#6998),#2189);
+#6998 = PRESENTATION_STYLE_ASSIGNMENT((#6999));
+#6999 = SURFACE_STYLE_USAGE(.BOTH.,#7000);
+#7000 = SURFACE_SIDE_STYLE('',(#7001));
+#7001 = SURFACE_STYLE_FILL_AREA(#7002);
+#7002 = FILL_AREA_STYLE('',(#7003));
+#7003 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7004 = STYLED_ITEM('color',(#7005),#2229);
+#7005 = PRESENTATION_STYLE_ASSIGNMENT((#7006));
+#7006 = SURFACE_STYLE_USAGE(.BOTH.,#7007);
+#7007 = SURFACE_SIDE_STYLE('',(#7008));
+#7008 = SURFACE_STYLE_FILL_AREA(#7009);
+#7009 = FILL_AREA_STYLE('',(#7010));
+#7010 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7011 = STYLED_ITEM('color',(#7012),#2254);
+#7012 = PRESENTATION_STYLE_ASSIGNMENT((#7013));
+#7013 = SURFACE_STYLE_USAGE(.BOTH.,#7014);
+#7014 = SURFACE_SIDE_STYLE('',(#7015));
+#7015 = SURFACE_STYLE_FILL_AREA(#7016);
+#7016 = FILL_AREA_STYLE('',(#7017));
+#7017 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7018 = STYLED_ITEM('color',(#7019),#2287);
+#7019 = PRESENTATION_STYLE_ASSIGNMENT((#7020));
+#7020 = SURFACE_STYLE_USAGE(.BOTH.,#7021);
+#7021 = SURFACE_SIDE_STYLE('',(#7022));
+#7022 = SURFACE_STYLE_FILL_AREA(#7023);
+#7023 = FILL_AREA_STYLE('',(#7024));
+#7024 = FILL_AREA_STYLE_COLOUR('',#6821);
+#7025 = STYLED_ITEM('color',(#7026),#2495);
+#7026 = PRESENTATION_STYLE_ASSIGNMENT((#7027));
+#7027 = SURFACE_STYLE_USAGE(.BOTH.,#7028);
+#7028 = SURFACE_SIDE_STYLE('',(#7029));
+#7029 = SURFACE_STYLE_FILL_AREA(#7030);
+#7030 = FILL_AREA_STYLE('',(#7031));
+#7031 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7032 = STYLED_ITEM('color',(#7033),#2535);
+#7033 = PRESENTATION_STYLE_ASSIGNMENT((#7034));
+#7034 = SURFACE_STYLE_USAGE(.BOTH.,#7035);
+#7035 = SURFACE_SIDE_STYLE('',(#7036));
+#7036 = SURFACE_STYLE_FILL_AREA(#7037);
+#7037 = FILL_AREA_STYLE('',(#7038));
+#7038 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7039 = STYLED_ITEM('color',(#7040),#2560);
+#7040 = PRESENTATION_STYLE_ASSIGNMENT((#7041));
+#7041 = SURFACE_STYLE_USAGE(.BOTH.,#7042);
+#7042 = SURFACE_SIDE_STYLE('',(#7043));
+#7043 = SURFACE_STYLE_FILL_AREA(#7044);
+#7044 = FILL_AREA_STYLE('',(#7045));
+#7045 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7046 = STYLED_ITEM('color',(#7047),#2593);
+#7047 = PRESENTATION_STYLE_ASSIGNMENT((#7048));
+#7048 = SURFACE_STYLE_USAGE(.BOTH.,#7049);
+#7049 = SURFACE_SIDE_STYLE('',(#7050));
+#7050 = SURFACE_STYLE_FILL_AREA(#7051);
+#7051 = FILL_AREA_STYLE('',(#7052));
+#7052 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7053 = STYLED_ITEM('color',(#7054),#2633);
+#7054 = PRESENTATION_STYLE_ASSIGNMENT((#7055));
+#7055 = SURFACE_STYLE_USAGE(.BOTH.,#7056);
+#7056 = SURFACE_SIDE_STYLE('',(#7057));
+#7057 = SURFACE_STYLE_FILL_AREA(#7058);
+#7058 = FILL_AREA_STYLE('',(#7059));
+#7059 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7060 = STYLED_ITEM('color',(#7061),#2658);
+#7061 = PRESENTATION_STYLE_ASSIGNMENT((#7062));
+#7062 = SURFACE_STYLE_USAGE(.BOTH.,#7063);
+#7063 = SURFACE_SIDE_STYLE('',(#7064));
+#7064 = SURFACE_STYLE_FILL_AREA(#7065);
+#7065 = FILL_AREA_STYLE('',(#7066));
+#7066 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7067 = STYLED_ITEM('color',(#7068),#2691);
+#7068 = PRESENTATION_STYLE_ASSIGNMENT((#7069));
+#7069 = SURFACE_STYLE_USAGE(.BOTH.,#7070);
+#7070 = SURFACE_SIDE_STYLE('',(#7071));
+#7071 = SURFACE_STYLE_FILL_AREA(#7072);
+#7072 = FILL_AREA_STYLE('',(#7073));
+#7073 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7074 = STYLED_ITEM('color',(#7075),#2731);
+#7075 = PRESENTATION_STYLE_ASSIGNMENT((#7076));
+#7076 = SURFACE_STYLE_USAGE(.BOTH.,#7077);
+#7077 = SURFACE_SIDE_STYLE('',(#7078));
+#7078 = SURFACE_STYLE_FILL_AREA(#7079);
+#7079 = FILL_AREA_STYLE('',(#7080));
+#7080 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7081 = STYLED_ITEM('color',(#7082),#2756);
+#7082 = PRESENTATION_STYLE_ASSIGNMENT((#7083));
+#7083 = SURFACE_STYLE_USAGE(.BOTH.,#7084);
+#7084 = SURFACE_SIDE_STYLE('',(#7085));
+#7085 = SURFACE_STYLE_FILL_AREA(#7086);
+#7086 = FILL_AREA_STYLE('',(#7087));
+#7087 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7088 = STYLED_ITEM('color',(#7089),#2789);
+#7089 = PRESENTATION_STYLE_ASSIGNMENT((#7090));
+#7090 = SURFACE_STYLE_USAGE(.BOTH.,#7091);
+#7091 = SURFACE_SIDE_STYLE('',(#7092));
+#7092 = SURFACE_STYLE_FILL_AREA(#7093);
+#7093 = FILL_AREA_STYLE('',(#7094));
+#7094 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7095 = STYLED_ITEM('color',(#7096),#2829);
+#7096 = PRESENTATION_STYLE_ASSIGNMENT((#7097));
+#7097 = SURFACE_STYLE_USAGE(.BOTH.,#7098);
+#7098 = SURFACE_SIDE_STYLE('',(#7099));
+#7099 = SURFACE_STYLE_FILL_AREA(#7100);
+#7100 = FILL_AREA_STYLE('',(#7101));
+#7101 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7102 = STYLED_ITEM('color',(#7103),#2854);
+#7103 = PRESENTATION_STYLE_ASSIGNMENT((#7104));
+#7104 = SURFACE_STYLE_USAGE(.BOTH.,#7105);
+#7105 = SURFACE_SIDE_STYLE('',(#7106));
+#7106 = SURFACE_STYLE_FILL_AREA(#7107);
+#7107 = FILL_AREA_STYLE('',(#7108));
+#7108 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7109 = STYLED_ITEM('color',(#7110),#2887);
+#7110 = PRESENTATION_STYLE_ASSIGNMENT((#7111));
+#7111 = SURFACE_STYLE_USAGE(.BOTH.,#7112);
+#7112 = SURFACE_SIDE_STYLE('',(#7113));
+#7113 = SURFACE_STYLE_FILL_AREA(#7114);
+#7114 = FILL_AREA_STYLE('',(#7115));
+#7115 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7116 = STYLED_ITEM('color',(#7117),#2927);
+#7117 = PRESENTATION_STYLE_ASSIGNMENT((#7118));
+#7118 = SURFACE_STYLE_USAGE(.BOTH.,#7119);
+#7119 = SURFACE_SIDE_STYLE('',(#7120));
+#7120 = SURFACE_STYLE_FILL_AREA(#7121);
+#7121 = FILL_AREA_STYLE('',(#7122));
+#7122 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7123 = STYLED_ITEM('color',(#7124),#2952);
+#7124 = PRESENTATION_STYLE_ASSIGNMENT((#7125));
+#7125 = SURFACE_STYLE_USAGE(.BOTH.,#7126);
+#7126 = SURFACE_SIDE_STYLE('',(#7127));
+#7127 = SURFACE_STYLE_FILL_AREA(#7128);
+#7128 = FILL_AREA_STYLE('',(#7129));
+#7129 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7130 = STYLED_ITEM('color',(#7131),#2985);
+#7131 = PRESENTATION_STYLE_ASSIGNMENT((#7132));
+#7132 = SURFACE_STYLE_USAGE(.BOTH.,#7133);
+#7133 = SURFACE_SIDE_STYLE('',(#7134));
+#7134 = SURFACE_STYLE_FILL_AREA(#7135);
+#7135 = FILL_AREA_STYLE('',(#7136));
+#7136 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7137 = STYLED_ITEM('color',(#7138),#3025);
+#7138 = PRESENTATION_STYLE_ASSIGNMENT((#7139));
+#7139 = SURFACE_STYLE_USAGE(.BOTH.,#7140);
+#7140 = SURFACE_SIDE_STYLE('',(#7141));
+#7141 = SURFACE_STYLE_FILL_AREA(#7142);
+#7142 = FILL_AREA_STYLE('',(#7143));
+#7143 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7144 = STYLED_ITEM('color',(#7145),#3050);
+#7145 = PRESENTATION_STYLE_ASSIGNMENT((#7146));
+#7146 = SURFACE_STYLE_USAGE(.BOTH.,#7147);
+#7147 = SURFACE_SIDE_STYLE('',(#7148));
+#7148 = SURFACE_STYLE_FILL_AREA(#7149);
+#7149 = FILL_AREA_STYLE('',(#7150));
+#7150 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7151 = STYLED_ITEM('color',(#7152),#3083);
+#7152 = PRESENTATION_STYLE_ASSIGNMENT((#7153));
+#7153 = SURFACE_STYLE_USAGE(.BOTH.,#7154);
+#7154 = SURFACE_SIDE_STYLE('',(#7155));
+#7155 = SURFACE_STYLE_FILL_AREA(#7156);
+#7156 = FILL_AREA_STYLE('',(#7157));
+#7157 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7158 = STYLED_ITEM('color',(#7159),#3123);
+#7159 = PRESENTATION_STYLE_ASSIGNMENT((#7160));
+#7160 = SURFACE_STYLE_USAGE(.BOTH.,#7161);
+#7161 = SURFACE_SIDE_STYLE('',(#7162));
+#7162 = SURFACE_STYLE_FILL_AREA(#7163);
+#7163 = FILL_AREA_STYLE('',(#7164));
+#7164 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7165 = STYLED_ITEM('color',(#7166),#3148);
+#7166 = PRESENTATION_STYLE_ASSIGNMENT((#7167));
+#7167 = SURFACE_STYLE_USAGE(.BOTH.,#7168);
+#7168 = SURFACE_SIDE_STYLE('',(#7169));
+#7169 = SURFACE_STYLE_FILL_AREA(#7170);
+#7170 = FILL_AREA_STYLE('',(#7171));
+#7171 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7172 = STYLED_ITEM('color',(#7173),#3181);
+#7173 = PRESENTATION_STYLE_ASSIGNMENT((#7174));
+#7174 = SURFACE_STYLE_USAGE(.BOTH.,#7175);
+#7175 = SURFACE_SIDE_STYLE('',(#7176));
+#7176 = SURFACE_STYLE_FILL_AREA(#7177);
+#7177 = FILL_AREA_STYLE('',(#7178));
+#7178 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7179 = STYLED_ITEM('color',(#7180),#3221);
+#7180 = PRESENTATION_STYLE_ASSIGNMENT((#7181));
+#7181 = SURFACE_STYLE_USAGE(.BOTH.,#7182);
+#7182 = SURFACE_SIDE_STYLE('',(#7183));
+#7183 = SURFACE_STYLE_FILL_AREA(#7184);
+#7184 = FILL_AREA_STYLE('',(#7185));
+#7185 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7186 = STYLED_ITEM('color',(#7187),#3246);
+#7187 = PRESENTATION_STYLE_ASSIGNMENT((#7188));
+#7188 = SURFACE_STYLE_USAGE(.BOTH.,#7189);
+#7189 = SURFACE_SIDE_STYLE('',(#7190));
+#7190 = SURFACE_STYLE_FILL_AREA(#7191);
+#7191 = FILL_AREA_STYLE('',(#7192));
+#7192 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7193 = STYLED_ITEM('color',(#7194),#3279);
+#7194 = PRESENTATION_STYLE_ASSIGNMENT((#7195));
+#7195 = SURFACE_STYLE_USAGE(.BOTH.,#7196);
+#7196 = SURFACE_SIDE_STYLE('',(#7197));
+#7197 = SURFACE_STYLE_FILL_AREA(#7198);
+#7198 = FILL_AREA_STYLE('',(#7199));
+#7199 = FILL_AREA_STYLE_COLOUR('',#6821);
+#7200 = STYLED_ITEM('color',(#7201),#3487);
+#7201 = PRESENTATION_STYLE_ASSIGNMENT((#7202));
+#7202 = SURFACE_STYLE_USAGE(.BOTH.,#7203);
+#7203 = SURFACE_SIDE_STYLE('',(#7204));
+#7204 = SURFACE_STYLE_FILL_AREA(#7205);
+#7205 = FILL_AREA_STYLE('',(#7206));
+#7206 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7207 = STYLED_ITEM('color',(#7208),#3527);
+#7208 = PRESENTATION_STYLE_ASSIGNMENT((#7209));
+#7209 = SURFACE_STYLE_USAGE(.BOTH.,#7210);
+#7210 = SURFACE_SIDE_STYLE('',(#7211));
+#7211 = SURFACE_STYLE_FILL_AREA(#7212);
+#7212 = FILL_AREA_STYLE('',(#7213));
+#7213 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7214 = STYLED_ITEM('color',(#7215),#3552);
+#7215 = PRESENTATION_STYLE_ASSIGNMENT((#7216));
+#7216 = SURFACE_STYLE_USAGE(.BOTH.,#7217);
+#7217 = SURFACE_SIDE_STYLE('',(#7218));
+#7218 = SURFACE_STYLE_FILL_AREA(#7219);
+#7219 = FILL_AREA_STYLE('',(#7220));
+#7220 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7221 = STYLED_ITEM('color',(#7222),#3585);
+#7222 = PRESENTATION_STYLE_ASSIGNMENT((#7223));
+#7223 = SURFACE_STYLE_USAGE(.BOTH.,#7224);
+#7224 = SURFACE_SIDE_STYLE('',(#7225));
+#7225 = SURFACE_STYLE_FILL_AREA(#7226);
+#7226 = FILL_AREA_STYLE('',(#7227));
+#7227 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7228 = STYLED_ITEM('color',(#7229),#3625);
+#7229 = PRESENTATION_STYLE_ASSIGNMENT((#7230));
+#7230 = SURFACE_STYLE_USAGE(.BOTH.,#7231);
+#7231 = SURFACE_SIDE_STYLE('',(#7232));
+#7232 = SURFACE_STYLE_FILL_AREA(#7233);
+#7233 = FILL_AREA_STYLE('',(#7234));
+#7234 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7235 = STYLED_ITEM('color',(#7236),#3650);
+#7236 = PRESENTATION_STYLE_ASSIGNMENT((#7237));
+#7237 = SURFACE_STYLE_USAGE(.BOTH.,#7238);
+#7238 = SURFACE_SIDE_STYLE('',(#7239));
+#7239 = SURFACE_STYLE_FILL_AREA(#7240);
+#7240 = FILL_AREA_STYLE('',(#7241));
+#7241 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7242 = STYLED_ITEM('color',(#7243),#3683);
+#7243 = PRESENTATION_STYLE_ASSIGNMENT((#7244));
+#7244 = SURFACE_STYLE_USAGE(.BOTH.,#7245);
+#7245 = SURFACE_SIDE_STYLE('',(#7246));
+#7246 = SURFACE_STYLE_FILL_AREA(#7247);
+#7247 = FILL_AREA_STYLE('',(#7248));
+#7248 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7249 = STYLED_ITEM('color',(#7250),#3723);
+#7250 = PRESENTATION_STYLE_ASSIGNMENT((#7251));
+#7251 = SURFACE_STYLE_USAGE(.BOTH.,#7252);
+#7252 = SURFACE_SIDE_STYLE('',(#7253));
+#7253 = SURFACE_STYLE_FILL_AREA(#7254);
+#7254 = FILL_AREA_STYLE('',(#7255));
+#7255 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7256 = STYLED_ITEM('color',(#7257),#3748);
+#7257 = PRESENTATION_STYLE_ASSIGNMENT((#7258));
+#7258 = SURFACE_STYLE_USAGE(.BOTH.,#7259);
+#7259 = SURFACE_SIDE_STYLE('',(#7260));
+#7260 = SURFACE_STYLE_FILL_AREA(#7261);
+#7261 = FILL_AREA_STYLE('',(#7262));
+#7262 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7263 = STYLED_ITEM('color',(#7264),#3781);
+#7264 = PRESENTATION_STYLE_ASSIGNMENT((#7265));
+#7265 = SURFACE_STYLE_USAGE(.BOTH.,#7266);
+#7266 = SURFACE_SIDE_STYLE('',(#7267));
+#7267 = SURFACE_STYLE_FILL_AREA(#7268);
+#7268 = FILL_AREA_STYLE('',(#7269));
+#7269 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7270 = STYLED_ITEM('color',(#7271),#3821);
+#7271 = PRESENTATION_STYLE_ASSIGNMENT((#7272));
+#7272 = SURFACE_STYLE_USAGE(.BOTH.,#7273);
+#7273 = SURFACE_SIDE_STYLE('',(#7274));
+#7274 = SURFACE_STYLE_FILL_AREA(#7275);
+#7275 = FILL_AREA_STYLE('',(#7276));
+#7276 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7277 = STYLED_ITEM('color',(#7278),#3846);
+#7278 = PRESENTATION_STYLE_ASSIGNMENT((#7279));
+#7279 = SURFACE_STYLE_USAGE(.BOTH.,#7280);
+#7280 = SURFACE_SIDE_STYLE('',(#7281));
+#7281 = SURFACE_STYLE_FILL_AREA(#7282);
+#7282 = FILL_AREA_STYLE('',(#7283));
+#7283 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7284 = STYLED_ITEM('color',(#7285),#3879);
+#7285 = PRESENTATION_STYLE_ASSIGNMENT((#7286));
+#7286 = SURFACE_STYLE_USAGE(.BOTH.,#7287);
+#7287 = SURFACE_SIDE_STYLE('',(#7288));
+#7288 = SURFACE_STYLE_FILL_AREA(#7289);
+#7289 = FILL_AREA_STYLE('',(#7290));
+#7290 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7291 = STYLED_ITEM('color',(#7292),#3919);
+#7292 = PRESENTATION_STYLE_ASSIGNMENT((#7293));
+#7293 = SURFACE_STYLE_USAGE(.BOTH.,#7294);
+#7294 = SURFACE_SIDE_STYLE('',(#7295));
+#7295 = SURFACE_STYLE_FILL_AREA(#7296);
+#7296 = FILL_AREA_STYLE('',(#7297));
+#7297 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7298 = STYLED_ITEM('color',(#7299),#3944);
+#7299 = PRESENTATION_STYLE_ASSIGNMENT((#7300));
+#7300 = SURFACE_STYLE_USAGE(.BOTH.,#7301);
+#7301 = SURFACE_SIDE_STYLE('',(#7302));
+#7302 = SURFACE_STYLE_FILL_AREA(#7303);
+#7303 = FILL_AREA_STYLE('',(#7304));
+#7304 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7305 = STYLED_ITEM('color',(#7306),#3977);
+#7306 = PRESENTATION_STYLE_ASSIGNMENT((#7307));
+#7307 = SURFACE_STYLE_USAGE(.BOTH.,#7308);
+#7308 = SURFACE_SIDE_STYLE('',(#7309));
+#7309 = SURFACE_STYLE_FILL_AREA(#7310);
+#7310 = FILL_AREA_STYLE('',(#7311));
+#7311 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7312 = STYLED_ITEM('color',(#7313),#4017);
+#7313 = PRESENTATION_STYLE_ASSIGNMENT((#7314));
+#7314 = SURFACE_STYLE_USAGE(.BOTH.,#7315);
+#7315 = SURFACE_SIDE_STYLE('',(#7316));
+#7316 = SURFACE_STYLE_FILL_AREA(#7317);
+#7317 = FILL_AREA_STYLE('',(#7318));
+#7318 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7319 = STYLED_ITEM('color',(#7320),#4042);
+#7320 = PRESENTATION_STYLE_ASSIGNMENT((#7321));
+#7321 = SURFACE_STYLE_USAGE(.BOTH.,#7322);
+#7322 = SURFACE_SIDE_STYLE('',(#7323));
+#7323 = SURFACE_STYLE_FILL_AREA(#7324);
+#7324 = FILL_AREA_STYLE('',(#7325));
+#7325 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7326 = STYLED_ITEM('color',(#7327),#4075);
+#7327 = PRESENTATION_STYLE_ASSIGNMENT((#7328));
+#7328 = SURFACE_STYLE_USAGE(.BOTH.,#7329);
+#7329 = SURFACE_SIDE_STYLE('',(#7330));
+#7330 = SURFACE_STYLE_FILL_AREA(#7331);
+#7331 = FILL_AREA_STYLE('',(#7332));
+#7332 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7333 = STYLED_ITEM('color',(#7334),#4115);
+#7334 = PRESENTATION_STYLE_ASSIGNMENT((#7335));
+#7335 = SURFACE_STYLE_USAGE(.BOTH.,#7336);
+#7336 = SURFACE_SIDE_STYLE('',(#7337));
+#7337 = SURFACE_STYLE_FILL_AREA(#7338);
+#7338 = FILL_AREA_STYLE('',(#7339));
+#7339 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7340 = STYLED_ITEM('color',(#7341),#4140);
+#7341 = PRESENTATION_STYLE_ASSIGNMENT((#7342));
+#7342 = SURFACE_STYLE_USAGE(.BOTH.,#7343);
+#7343 = SURFACE_SIDE_STYLE('',(#7344));
+#7344 = SURFACE_STYLE_FILL_AREA(#7345);
+#7345 = FILL_AREA_STYLE('',(#7346));
+#7346 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7347 = STYLED_ITEM('color',(#7348),#4173);
+#7348 = PRESENTATION_STYLE_ASSIGNMENT((#7349));
+#7349 = SURFACE_STYLE_USAGE(.BOTH.,#7350);
+#7350 = SURFACE_SIDE_STYLE('',(#7351));
+#7351 = SURFACE_STYLE_FILL_AREA(#7352);
+#7352 = FILL_AREA_STYLE('',(#7353));
+#7353 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7354 = STYLED_ITEM('color',(#7355),#4213);
+#7355 = PRESENTATION_STYLE_ASSIGNMENT((#7356));
+#7356 = SURFACE_STYLE_USAGE(.BOTH.,#7357);
+#7357 = SURFACE_SIDE_STYLE('',(#7358));
+#7358 = SURFACE_STYLE_FILL_AREA(#7359);
+#7359 = FILL_AREA_STYLE('',(#7360));
+#7360 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7361 = STYLED_ITEM('color',(#7362),#4238);
+#7362 = PRESENTATION_STYLE_ASSIGNMENT((#7363));
+#7363 = SURFACE_STYLE_USAGE(.BOTH.,#7364);
+#7364 = SURFACE_SIDE_STYLE('',(#7365));
+#7365 = SURFACE_STYLE_FILL_AREA(#7366);
+#7366 = FILL_AREA_STYLE('',(#7367));
+#7367 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7368 = STYLED_ITEM('color',(#7369),#4271);
+#7369 = PRESENTATION_STYLE_ASSIGNMENT((#7370));
+#7370 = SURFACE_STYLE_USAGE(.BOTH.,#7371);
+#7371 = SURFACE_SIDE_STYLE('',(#7372));
+#7372 = SURFACE_STYLE_FILL_AREA(#7373);
+#7373 = FILL_AREA_STYLE('',(#7374));
+#7374 = FILL_AREA_STYLE_COLOUR('',#6821);
+#7375 = STYLED_ITEM('color',(#7376),#4472);
+#7376 = PRESENTATION_STYLE_ASSIGNMENT((#7377));
+#7377 = SURFACE_STYLE_USAGE(.BOTH.,#7378);
+#7378 = SURFACE_SIDE_STYLE('',(#7379));
+#7379 = SURFACE_STYLE_FILL_AREA(#7380);
+#7380 = FILL_AREA_STYLE('',(#7381));
+#7381 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7382 = STYLED_ITEM('color',(#7383),#4512);
+#7383 = PRESENTATION_STYLE_ASSIGNMENT((#7384));
+#7384 = SURFACE_STYLE_USAGE(.BOTH.,#7385);
+#7385 = SURFACE_SIDE_STYLE('',(#7386));
+#7386 = SURFACE_STYLE_FILL_AREA(#7387);
+#7387 = FILL_AREA_STYLE('',(#7388));
+#7388 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7389 = STYLED_ITEM('color',(#7390),#4537);
+#7390 = PRESENTATION_STYLE_ASSIGNMENT((#7391));
+#7391 = SURFACE_STYLE_USAGE(.BOTH.,#7392);
+#7392 = SURFACE_SIDE_STYLE('',(#7393));
+#7393 = SURFACE_STYLE_FILL_AREA(#7394);
+#7394 = FILL_AREA_STYLE('',(#7395));
+#7395 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7396 = STYLED_ITEM('color',(#7397),#4570);
+#7397 = PRESENTATION_STYLE_ASSIGNMENT((#7398));
+#7398 = SURFACE_STYLE_USAGE(.BOTH.,#7399);
+#7399 = SURFACE_SIDE_STYLE('',(#7400));
+#7400 = SURFACE_STYLE_FILL_AREA(#7401);
+#7401 = FILL_AREA_STYLE('',(#7402));
+#7402 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7403 = STYLED_ITEM('color',(#7404),#4610);
+#7404 = PRESENTATION_STYLE_ASSIGNMENT((#7405));
+#7405 = SURFACE_STYLE_USAGE(.BOTH.,#7406);
+#7406 = SURFACE_SIDE_STYLE('',(#7407));
+#7407 = SURFACE_STYLE_FILL_AREA(#7408);
+#7408 = FILL_AREA_STYLE('',(#7409));
+#7409 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7410 = STYLED_ITEM('color',(#7411),#4635);
+#7411 = PRESENTATION_STYLE_ASSIGNMENT((#7412));
+#7412 = SURFACE_STYLE_USAGE(.BOTH.,#7413);
+#7413 = SURFACE_SIDE_STYLE('',(#7414));
+#7414 = SURFACE_STYLE_FILL_AREA(#7415);
+#7415 = FILL_AREA_STYLE('',(#7416));
+#7416 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7417 = STYLED_ITEM('color',(#7418),#4668);
+#7418 = PRESENTATION_STYLE_ASSIGNMENT((#7419));
+#7419 = SURFACE_STYLE_USAGE(.BOTH.,#7420);
+#7420 = SURFACE_SIDE_STYLE('',(#7421));
+#7421 = SURFACE_STYLE_FILL_AREA(#7422);
+#7422 = FILL_AREA_STYLE('',(#7423));
+#7423 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7424 = STYLED_ITEM('color',(#7425),#4708);
+#7425 = PRESENTATION_STYLE_ASSIGNMENT((#7426));
+#7426 = SURFACE_STYLE_USAGE(.BOTH.,#7427);
+#7427 = SURFACE_SIDE_STYLE('',(#7428));
+#7428 = SURFACE_STYLE_FILL_AREA(#7429);
+#7429 = FILL_AREA_STYLE('',(#7430));
+#7430 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7431 = STYLED_ITEM('color',(#7432),#4733);
+#7432 = PRESENTATION_STYLE_ASSIGNMENT((#7433));
+#7433 = SURFACE_STYLE_USAGE(.BOTH.,#7434);
+#7434 = SURFACE_SIDE_STYLE('',(#7435));
+#7435 = SURFACE_STYLE_FILL_AREA(#7436);
+#7436 = FILL_AREA_STYLE('',(#7437));
+#7437 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7438 = STYLED_ITEM('color',(#7439),#4766);
+#7439 = PRESENTATION_STYLE_ASSIGNMENT((#7440));
+#7440 = SURFACE_STYLE_USAGE(.BOTH.,#7441);
+#7441 = SURFACE_SIDE_STYLE('',(#7442));
+#7442 = SURFACE_STYLE_FILL_AREA(#7443);
+#7443 = FILL_AREA_STYLE('',(#7444));
+#7444 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7445 = STYLED_ITEM('color',(#7446),#4806);
+#7446 = PRESENTATION_STYLE_ASSIGNMENT((#7447));
+#7447 = SURFACE_STYLE_USAGE(.BOTH.,#7448);
+#7448 = SURFACE_SIDE_STYLE('',(#7449));
+#7449 = SURFACE_STYLE_FILL_AREA(#7450);
+#7450 = FILL_AREA_STYLE('',(#7451));
+#7451 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7452 = STYLED_ITEM('color',(#7453),#4831);
+#7453 = PRESENTATION_STYLE_ASSIGNMENT((#7454));
+#7454 = SURFACE_STYLE_USAGE(.BOTH.,#7455);
+#7455 = SURFACE_SIDE_STYLE('',(#7456));
+#7456 = SURFACE_STYLE_FILL_AREA(#7457);
+#7457 = FILL_AREA_STYLE('',(#7458));
+#7458 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7459 = STYLED_ITEM('color',(#7460),#4864);
+#7460 = PRESENTATION_STYLE_ASSIGNMENT((#7461));
+#7461 = SURFACE_STYLE_USAGE(.BOTH.,#7462);
+#7462 = SURFACE_SIDE_STYLE('',(#7463));
+#7463 = SURFACE_STYLE_FILL_AREA(#7464);
+#7464 = FILL_AREA_STYLE('',(#7465));
+#7465 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7466 = STYLED_ITEM('color',(#7467),#4904);
+#7467 = PRESENTATION_STYLE_ASSIGNMENT((#7468));
+#7468 = SURFACE_STYLE_USAGE(.BOTH.,#7469);
+#7469 = SURFACE_SIDE_STYLE('',(#7470));
+#7470 = SURFACE_STYLE_FILL_AREA(#7471);
+#7471 = FILL_AREA_STYLE('',(#7472));
+#7472 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7473 = STYLED_ITEM('color',(#7474),#4929);
+#7474 = PRESENTATION_STYLE_ASSIGNMENT((#7475));
+#7475 = SURFACE_STYLE_USAGE(.BOTH.,#7476);
+#7476 = SURFACE_SIDE_STYLE('',(#7477));
+#7477 = SURFACE_STYLE_FILL_AREA(#7478);
+#7478 = FILL_AREA_STYLE('',(#7479));
+#7479 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7480 = STYLED_ITEM('color',(#7481),#4962);
+#7481 = PRESENTATION_STYLE_ASSIGNMENT((#7482));
+#7482 = SURFACE_STYLE_USAGE(.BOTH.,#7483);
+#7483 = SURFACE_SIDE_STYLE('',(#7484));
+#7484 = SURFACE_STYLE_FILL_AREA(#7485);
+#7485 = FILL_AREA_STYLE('',(#7486));
+#7486 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7487 = STYLED_ITEM('color',(#7488),#5002);
+#7488 = PRESENTATION_STYLE_ASSIGNMENT((#7489));
+#7489 = SURFACE_STYLE_USAGE(.BOTH.,#7490);
+#7490 = SURFACE_SIDE_STYLE('',(#7491));
+#7491 = SURFACE_STYLE_FILL_AREA(#7492);
+#7492 = FILL_AREA_STYLE('',(#7493));
+#7493 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7494 = STYLED_ITEM('color',(#7495),#5027);
+#7495 = PRESENTATION_STYLE_ASSIGNMENT((#7496));
+#7496 = SURFACE_STYLE_USAGE(.BOTH.,#7497);
+#7497 = SURFACE_SIDE_STYLE('',(#7498));
+#7498 = SURFACE_STYLE_FILL_AREA(#7499);
+#7499 = FILL_AREA_STYLE('',(#7500));
+#7500 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7501 = STYLED_ITEM('color',(#7502),#5060);
+#7502 = PRESENTATION_STYLE_ASSIGNMENT((#7503));
+#7503 = SURFACE_STYLE_USAGE(.BOTH.,#7504);
+#7504 = SURFACE_SIDE_STYLE('',(#7505));
+#7505 = SURFACE_STYLE_FILL_AREA(#7506);
+#7506 = FILL_AREA_STYLE('',(#7507));
+#7507 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7508 = STYLED_ITEM('color',(#7509),#5100);
+#7509 = PRESENTATION_STYLE_ASSIGNMENT((#7510));
+#7510 = SURFACE_STYLE_USAGE(.BOTH.,#7511);
+#7511 = SURFACE_SIDE_STYLE('',(#7512));
+#7512 = SURFACE_STYLE_FILL_AREA(#7513);
+#7513 = FILL_AREA_STYLE('',(#7514));
+#7514 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7515 = STYLED_ITEM('color',(#7516),#5125);
+#7516 = PRESENTATION_STYLE_ASSIGNMENT((#7517));
+#7517 = SURFACE_STYLE_USAGE(.BOTH.,#7518);
+#7518 = SURFACE_SIDE_STYLE('',(#7519));
+#7519 = SURFACE_STYLE_FILL_AREA(#7520);
+#7520 = FILL_AREA_STYLE('',(#7521));
+#7521 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7522 = STYLED_ITEM('color',(#7523),#5158);
+#7523 = PRESENTATION_STYLE_ASSIGNMENT((#7524));
+#7524 = SURFACE_STYLE_USAGE(.BOTH.,#7525);
+#7525 = SURFACE_SIDE_STYLE('',(#7526));
+#7526 = SURFACE_STYLE_FILL_AREA(#7527);
+#7527 = FILL_AREA_STYLE('',(#7528));
+#7528 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7529 = STYLED_ITEM('color',(#7530),#5198);
+#7530 = PRESENTATION_STYLE_ASSIGNMENT((#7531));
+#7531 = SURFACE_STYLE_USAGE(.BOTH.,#7532);
+#7532 = SURFACE_SIDE_STYLE('',(#7533));
+#7533 = SURFACE_STYLE_FILL_AREA(#7534);
+#7534 = FILL_AREA_STYLE('',(#7535));
+#7535 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7536 = STYLED_ITEM('color',(#7537),#5223);
+#7537 = PRESENTATION_STYLE_ASSIGNMENT((#7538));
+#7538 = SURFACE_STYLE_USAGE(.BOTH.,#7539);
+#7539 = SURFACE_SIDE_STYLE('',(#7540));
+#7540 = SURFACE_STYLE_FILL_AREA(#7541);
+#7541 = FILL_AREA_STYLE('',(#7542));
+#7542 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7543 = STYLED_ITEM('color',(#7544),#5256);
+#7544 = PRESENTATION_STYLE_ASSIGNMENT((#7545));
+#7545 = SURFACE_STYLE_USAGE(.BOTH.,#7546);
+#7546 = SURFACE_SIDE_STYLE('',(#7547));
+#7547 = SURFACE_STYLE_FILL_AREA(#7548);
+#7548 = FILL_AREA_STYLE('',(#7549));
+#7549 = FILL_AREA_STYLE_COLOUR('',#6821);
+#7550 = STYLED_ITEM('color',(#7551),#5279);
+#7551 = PRESENTATION_STYLE_ASSIGNMENT((#7552));
+#7552 = SURFACE_STYLE_USAGE(.BOTH.,#7553);
+#7553 = SURFACE_SIDE_STYLE('',(#7554));
+#7554 = SURFACE_STYLE_FILL_AREA(#7555);
+#7555 = FILL_AREA_STYLE('',(#7556));
+#7556 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7557 = STYLED_ITEM('color',(#7558),#5296);
+#7558 = PRESENTATION_STYLE_ASSIGNMENT((#7559));
+#7559 = SURFACE_STYLE_USAGE(.BOTH.,#7560);
+#7560 = SURFACE_SIDE_STYLE('',(#7561));
+#7561 = SURFACE_STYLE_FILL_AREA(#7562);
+#7562 = FILL_AREA_STYLE('',(#7563));
+#7563 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7564 = STYLED_ITEM('color',(#7565),#5313);
+#7565 = PRESENTATION_STYLE_ASSIGNMENT((#7566));
+#7566 = SURFACE_STYLE_USAGE(.BOTH.,#7567);
+#7567 = SURFACE_SIDE_STYLE('',(#7568));
+#7568 = SURFACE_STYLE_FILL_AREA(#7569);
+#7569 = FILL_AREA_STYLE('',(#7570));
+#7570 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7571 = STYLED_ITEM('color',(#7572),#5330);
+#7572 = PRESENTATION_STYLE_ASSIGNMENT((#7573));
+#7573 = SURFACE_STYLE_USAGE(.BOTH.,#7574);
+#7574 = SURFACE_SIDE_STYLE('',(#7575));
+#7575 = SURFACE_STYLE_FILL_AREA(#7576);
+#7576 = FILL_AREA_STYLE('',(#7577));
+#7577 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7578 = STYLED_ITEM('color',(#7579),#5347);
+#7579 = PRESENTATION_STYLE_ASSIGNMENT((#7580));
+#7580 = SURFACE_STYLE_USAGE(.BOTH.,#7581);
+#7581 = SURFACE_SIDE_STYLE('',(#7582));
+#7582 = SURFACE_STYLE_FILL_AREA(#7583);
+#7583 = FILL_AREA_STYLE('',(#7584));
+#7584 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7585 = STYLED_ITEM('color',(#7586),#5364);
+#7586 = PRESENTATION_STYLE_ASSIGNMENT((#7587));
+#7587 = SURFACE_STYLE_USAGE(.BOTH.,#7588);
+#7588 = SURFACE_SIDE_STYLE('',(#7589));
+#7589 = SURFACE_STYLE_FILL_AREA(#7590);
+#7590 = FILL_AREA_STYLE('',(#7591));
+#7591 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7592 = STYLED_ITEM('color',(#7593),#5381);
+#7593 = PRESENTATION_STYLE_ASSIGNMENT((#7594));
+#7594 = SURFACE_STYLE_USAGE(.BOTH.,#7595);
+#7595 = SURFACE_SIDE_STYLE('',(#7596));
+#7596 = SURFACE_STYLE_FILL_AREA(#7597);
+#7597 = FILL_AREA_STYLE('',(#7598));
+#7598 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7599 = STYLED_ITEM('color',(#7600),#5398);
+#7600 = PRESENTATION_STYLE_ASSIGNMENT((#7601));
+#7601 = SURFACE_STYLE_USAGE(.BOTH.,#7602);
+#7602 = SURFACE_SIDE_STYLE('',(#7603));
+#7603 = SURFACE_STYLE_FILL_AREA(#7604);
+#7604 = FILL_AREA_STYLE('',(#7605));
+#7605 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7606 = STYLED_ITEM('color',(#7607),#5415);
+#7607 = PRESENTATION_STYLE_ASSIGNMENT((#7608));
+#7608 = SURFACE_STYLE_USAGE(.BOTH.,#7609);
+#7609 = SURFACE_SIDE_STYLE('',(#7610));
+#7610 = SURFACE_STYLE_FILL_AREA(#7611);
+#7611 = FILL_AREA_STYLE('',(#7612));
+#7612 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7613 = STYLED_ITEM('color',(#7614),#5432);
+#7614 = PRESENTATION_STYLE_ASSIGNMENT((#7615));
+#7615 = SURFACE_STYLE_USAGE(.BOTH.,#7616);
+#7616 = SURFACE_SIDE_STYLE('',(#7617));
+#7617 = SURFACE_STYLE_FILL_AREA(#7618);
+#7618 = FILL_AREA_STYLE('',(#7619));
+#7619 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7620 = STYLED_ITEM('color',(#7621),#5444);
+#7621 = PRESENTATION_STYLE_ASSIGNMENT((#7622));
+#7622 = SURFACE_STYLE_USAGE(.BOTH.,#7623);
+#7623 = SURFACE_SIDE_STYLE('',(#7624));
+#7624 = SURFACE_STYLE_FILL_AREA(#7625);
+#7625 = FILL_AREA_STYLE('',(#7626));
+#7626 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7627 = STYLED_ITEM('color',(#7628),#5461);
+#7628 = PRESENTATION_STYLE_ASSIGNMENT((#7629));
+#7629 = SURFACE_STYLE_USAGE(.BOTH.,#7630);
+#7630 = SURFACE_SIDE_STYLE('',(#7631));
+#7631 = SURFACE_STYLE_FILL_AREA(#7632);
+#7632 = FILL_AREA_STYLE('',(#7633));
+#7633 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7634 = STYLED_ITEM('color',(#7635),#5473);
+#7635 = PRESENTATION_STYLE_ASSIGNMENT((#7636));
+#7636 = SURFACE_STYLE_USAGE(.BOTH.,#7637);
+#7637 = SURFACE_SIDE_STYLE('',(#7638));
+#7638 = SURFACE_STYLE_FILL_AREA(#7639);
+#7639 = FILL_AREA_STYLE('',(#7640));
+#7640 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7641 = STYLED_ITEM('color',(#7642),#5490);
+#7642 = PRESENTATION_STYLE_ASSIGNMENT((#7643));
+#7643 = SURFACE_STYLE_USAGE(.BOTH.,#7644);
+#7644 = SURFACE_SIDE_STYLE('',(#7645));
+#7645 = SURFACE_STYLE_FILL_AREA(#7646);
+#7646 = FILL_AREA_STYLE('',(#7647));
+#7647 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7648 = STYLED_ITEM('color',(#7649),#5502);
+#7649 = PRESENTATION_STYLE_ASSIGNMENT((#7650));
+#7650 = SURFACE_STYLE_USAGE(.BOTH.,#7651);
+#7651 = SURFACE_SIDE_STYLE('',(#7652));
+#7652 = SURFACE_STYLE_FILL_AREA(#7653);
+#7653 = FILL_AREA_STYLE('',(#7654));
+#7654 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7655 = STYLED_ITEM('color',(#7656),#5519);
+#7656 = PRESENTATION_STYLE_ASSIGNMENT((#7657));
+#7657 = SURFACE_STYLE_USAGE(.BOTH.,#7658);
+#7658 = SURFACE_SIDE_STYLE('',(#7659));
+#7659 = SURFACE_STYLE_FILL_AREA(#7660);
+#7660 = FILL_AREA_STYLE('',(#7661));
+#7661 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7662 = STYLED_ITEM('color',(#7663),#5531);
+#7663 = PRESENTATION_STYLE_ASSIGNMENT((#7664));
+#7664 = SURFACE_STYLE_USAGE(.BOTH.,#7665);
+#7665 = SURFACE_SIDE_STYLE('',(#7666));
+#7666 = SURFACE_STYLE_FILL_AREA(#7667);
+#7667 = FILL_AREA_STYLE('',(#7668));
+#7668 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7669 = STYLED_ITEM('color',(#7670),#5548);
+#7670 = PRESENTATION_STYLE_ASSIGNMENT((#7671));
+#7671 = SURFACE_STYLE_USAGE(.BOTH.,#7672);
+#7672 = SURFACE_SIDE_STYLE('',(#7673));
+#7673 = SURFACE_STYLE_FILL_AREA(#7674);
+#7674 = FILL_AREA_STYLE('',(#7675));
+#7675 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7676 = STYLED_ITEM('color',(#7677),#5560);
+#7677 = PRESENTATION_STYLE_ASSIGNMENT((#7678));
+#7678 = SURFACE_STYLE_USAGE(.BOTH.,#7679);
+#7679 = SURFACE_SIDE_STYLE('',(#7680));
+#7680 = SURFACE_STYLE_FILL_AREA(#7681);
+#7681 = FILL_AREA_STYLE('',(#7682));
+#7682 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7683 = STYLED_ITEM('color',(#7684),#5577);
+#7684 = PRESENTATION_STYLE_ASSIGNMENT((#7685));
+#7685 = SURFACE_STYLE_USAGE(.BOTH.,#7686);
+#7686 = SURFACE_SIDE_STYLE('',(#7687));
+#7687 = SURFACE_STYLE_FILL_AREA(#7688);
+#7688 = FILL_AREA_STYLE('',(#7689));
+#7689 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7690 = STYLED_ITEM('color',(#7691),#5589);
+#7691 = PRESENTATION_STYLE_ASSIGNMENT((#7692));
+#7692 = SURFACE_STYLE_USAGE(.BOTH.,#7693);
+#7693 = SURFACE_SIDE_STYLE('',(#7694));
+#7694 = SURFACE_STYLE_FILL_AREA(#7695);
+#7695 = FILL_AREA_STYLE('',(#7696));
+#7696 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7697 = STYLED_ITEM('color',(#7698),#5606);
+#7698 = PRESENTATION_STYLE_ASSIGNMENT((#7699));
+#7699 = SURFACE_STYLE_USAGE(.BOTH.,#7700);
+#7700 = SURFACE_SIDE_STYLE('',(#7701));
+#7701 = SURFACE_STYLE_FILL_AREA(#7702);
+#7702 = FILL_AREA_STYLE('',(#7703));
+#7703 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7704 = STYLED_ITEM('color',(#7705),#5618);
+#7705 = PRESENTATION_STYLE_ASSIGNMENT((#7706));
+#7706 = SURFACE_STYLE_USAGE(.BOTH.,#7707);
+#7707 = SURFACE_SIDE_STYLE('',(#7708));
+#7708 = SURFACE_STYLE_FILL_AREA(#7709);
+#7709 = FILL_AREA_STYLE('',(#7710));
+#7710 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7711 = STYLED_ITEM('color',(#7712),#5635);
+#7712 = PRESENTATION_STYLE_ASSIGNMENT((#7713));
+#7713 = SURFACE_STYLE_USAGE(.BOTH.,#7714);
+#7714 = SURFACE_SIDE_STYLE('',(#7715));
+#7715 = SURFACE_STYLE_FILL_AREA(#7716);
+#7716 = FILL_AREA_STYLE('',(#7717));
+#7717 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7718 = STYLED_ITEM('color',(#7719),#5647);
+#7719 = PRESENTATION_STYLE_ASSIGNMENT((#7720));
+#7720 = SURFACE_STYLE_USAGE(.BOTH.,#7721);
+#7721 = SURFACE_SIDE_STYLE('',(#7722));
+#7722 = SURFACE_STYLE_FILL_AREA(#7723);
+#7723 = FILL_AREA_STYLE('',(#7724));
+#7724 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7725 = STYLED_ITEM('color',(#7726),#5664);
+#7726 = PRESENTATION_STYLE_ASSIGNMENT((#7727));
+#7727 = SURFACE_STYLE_USAGE(.BOTH.,#7728);
+#7728 = SURFACE_SIDE_STYLE('',(#7729));
+#7729 = SURFACE_STYLE_FILL_AREA(#7730);
+#7730 = FILL_AREA_STYLE('',(#7731));
+#7731 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7732 = STYLED_ITEM('color',(#7733),#5681);
+#7733 = PRESENTATION_STYLE_ASSIGNMENT((#7734));
+#7734 = SURFACE_STYLE_USAGE(.BOTH.,#7735);
+#7735 = SURFACE_SIDE_STYLE('',(#7736));
+#7736 = SURFACE_STYLE_FILL_AREA(#7737);
+#7737 = FILL_AREA_STYLE('',(#7738));
+#7738 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7739 = STYLED_ITEM('color',(#7740),#5698);
+#7740 = PRESENTATION_STYLE_ASSIGNMENT((#7741));
+#7741 = SURFACE_STYLE_USAGE(.BOTH.,#7742);
+#7742 = SURFACE_SIDE_STYLE('',(#7743));
+#7743 = SURFACE_STYLE_FILL_AREA(#7744);
+#7744 = FILL_AREA_STYLE('',(#7745));
+#7745 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7746 = STYLED_ITEM('color',(#7747),#5715);
+#7747 = PRESENTATION_STYLE_ASSIGNMENT((#7748));
+#7748 = SURFACE_STYLE_USAGE(.BOTH.,#7749);
+#7749 = SURFACE_SIDE_STYLE('',(#7750));
+#7750 = SURFACE_STYLE_FILL_AREA(#7751);
+#7751 = FILL_AREA_STYLE('',(#7752));
+#7752 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7753 = STYLED_ITEM('color',(#7754),#5732);
+#7754 = PRESENTATION_STYLE_ASSIGNMENT((#7755));
+#7755 = SURFACE_STYLE_USAGE(.BOTH.,#7756);
+#7756 = SURFACE_SIDE_STYLE('',(#7757));
+#7757 = SURFACE_STYLE_FILL_AREA(#7758);
+#7758 = FILL_AREA_STYLE('',(#7759));
+#7759 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7760 = STYLED_ITEM('color',(#7761),#5749);
+#7761 = PRESENTATION_STYLE_ASSIGNMENT((#7762));
+#7762 = SURFACE_STYLE_USAGE(.BOTH.,#7763);
+#7763 = SURFACE_SIDE_STYLE('',(#7764));
+#7764 = SURFACE_STYLE_FILL_AREA(#7765);
+#7765 = FILL_AREA_STYLE('',(#7766));
+#7766 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7767 = STYLED_ITEM('color',(#7768),#5766);
+#7768 = PRESENTATION_STYLE_ASSIGNMENT((#7769));
+#7769 = SURFACE_STYLE_USAGE(.BOTH.,#7770);
+#7770 = SURFACE_SIDE_STYLE('',(#7771));
+#7771 = SURFACE_STYLE_FILL_AREA(#7772);
+#7772 = FILL_AREA_STYLE('',(#7773));
+#7773 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7774 = STYLED_ITEM('color',(#7775),#5783);
+#7775 = PRESENTATION_STYLE_ASSIGNMENT((#7776));
+#7776 = SURFACE_STYLE_USAGE(.BOTH.,#7777);
+#7777 = SURFACE_SIDE_STYLE('',(#7778));
+#7778 = SURFACE_STYLE_FILL_AREA(#7779);
+#7779 = FILL_AREA_STYLE('',(#7780));
+#7780 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7781 = STYLED_ITEM('color',(#7782),#5800);
+#7782 = PRESENTATION_STYLE_ASSIGNMENT((#7783));
+#7783 = SURFACE_STYLE_USAGE(.BOTH.,#7784);
+#7784 = SURFACE_SIDE_STYLE('',(#7785));
+#7785 = SURFACE_STYLE_FILL_AREA(#7786);
+#7786 = FILL_AREA_STYLE('',(#7787));
+#7787 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7788 = STYLED_ITEM('color',(#7789),#5812);
+#7789 = PRESENTATION_STYLE_ASSIGNMENT((#7790));
+#7790 = SURFACE_STYLE_USAGE(.BOTH.,#7791);
+#7791 = SURFACE_SIDE_STYLE('',(#7792));
+#7792 = SURFACE_STYLE_FILL_AREA(#7793);
+#7793 = FILL_AREA_STYLE('',(#7794));
+#7794 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7795 = STYLED_ITEM('color',(#7796),#5829);
+#7796 = PRESENTATION_STYLE_ASSIGNMENT((#7797));
+#7797 = SURFACE_STYLE_USAGE(.BOTH.,#7798);
+#7798 = SURFACE_SIDE_STYLE('',(#7799));
+#7799 = SURFACE_STYLE_FILL_AREA(#7800);
+#7800 = FILL_AREA_STYLE('',(#7801));
+#7801 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7802 = STYLED_ITEM('color',(#7803),#5841);
+#7803 = PRESENTATION_STYLE_ASSIGNMENT((#7804));
+#7804 = SURFACE_STYLE_USAGE(.BOTH.,#7805);
+#7805 = SURFACE_SIDE_STYLE('',(#7806));
+#7806 = SURFACE_STYLE_FILL_AREA(#7807);
+#7807 = FILL_AREA_STYLE('',(#7808));
+#7808 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7809 = STYLED_ITEM('color',(#7810),#5858);
+#7810 = PRESENTATION_STYLE_ASSIGNMENT((#7811));
+#7811 = SURFACE_STYLE_USAGE(.BOTH.,#7812);
+#7812 = SURFACE_SIDE_STYLE('',(#7813));
+#7813 = SURFACE_STYLE_FILL_AREA(#7814);
+#7814 = FILL_AREA_STYLE('',(#7815));
+#7815 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7816 = STYLED_ITEM('color',(#7817),#5870);
+#7817 = PRESENTATION_STYLE_ASSIGNMENT((#7818));
+#7818 = SURFACE_STYLE_USAGE(.BOTH.,#7819);
+#7819 = SURFACE_SIDE_STYLE('',(#7820));
+#7820 = SURFACE_STYLE_FILL_AREA(#7821);
+#7821 = FILL_AREA_STYLE('',(#7822));
+#7822 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7823 = STYLED_ITEM('color',(#7824),#5887);
+#7824 = PRESENTATION_STYLE_ASSIGNMENT((#7825));
+#7825 = SURFACE_STYLE_USAGE(.BOTH.,#7826);
+#7826 = SURFACE_SIDE_STYLE('',(#7827));
+#7827 = SURFACE_STYLE_FILL_AREA(#7828);
+#7828 = FILL_AREA_STYLE('',(#7829));
+#7829 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7830 = STYLED_ITEM('color',(#7831),#5899);
+#7831 = PRESENTATION_STYLE_ASSIGNMENT((#7832));
+#7832 = SURFACE_STYLE_USAGE(.BOTH.,#7833);
+#7833 = SURFACE_SIDE_STYLE('',(#7834));
+#7834 = SURFACE_STYLE_FILL_AREA(#7835);
+#7835 = FILL_AREA_STYLE('',(#7836));
+#7836 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7837 = STYLED_ITEM('color',(#7838),#5916);
+#7838 = PRESENTATION_STYLE_ASSIGNMENT((#7839));
+#7839 = SURFACE_STYLE_USAGE(.BOTH.,#7840);
+#7840 = SURFACE_SIDE_STYLE('',(#7841));
+#7841 = SURFACE_STYLE_FILL_AREA(#7842);
+#7842 = FILL_AREA_STYLE('',(#7843));
+#7843 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7844 = STYLED_ITEM('color',(#7845),#5928);
+#7845 = PRESENTATION_STYLE_ASSIGNMENT((#7846));
+#7846 = SURFACE_STYLE_USAGE(.BOTH.,#7847);
+#7847 = SURFACE_SIDE_STYLE('',(#7848));
+#7848 = SURFACE_STYLE_FILL_AREA(#7849);
+#7849 = FILL_AREA_STYLE('',(#7850));
+#7850 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7851 = STYLED_ITEM('color',(#7852),#5945);
+#7852 = PRESENTATION_STYLE_ASSIGNMENT((#7853));
+#7853 = SURFACE_STYLE_USAGE(.BOTH.,#7854);
+#7854 = SURFACE_SIDE_STYLE('',(#7855));
+#7855 = SURFACE_STYLE_FILL_AREA(#7856);
+#7856 = FILL_AREA_STYLE('',(#7857));
+#7857 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7858 = STYLED_ITEM('color',(#7859),#5957);
+#7859 = PRESENTATION_STYLE_ASSIGNMENT((#7860));
+#7860 = SURFACE_STYLE_USAGE(.BOTH.,#7861);
+#7861 = SURFACE_SIDE_STYLE('',(#7862));
+#7862 = SURFACE_STYLE_FILL_AREA(#7863);
+#7863 = FILL_AREA_STYLE('',(#7864));
+#7864 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7865 = STYLED_ITEM('color',(#7866),#5974);
+#7866 = PRESENTATION_STYLE_ASSIGNMENT((#7867));
+#7867 = SURFACE_STYLE_USAGE(.BOTH.,#7868);
+#7868 = SURFACE_SIDE_STYLE('',(#7869));
+#7869 = SURFACE_STYLE_FILL_AREA(#7870);
+#7870 = FILL_AREA_STYLE('',(#7871));
+#7871 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7872 = STYLED_ITEM('color',(#7873),#5986);
+#7873 = PRESENTATION_STYLE_ASSIGNMENT((#7874));
+#7874 = SURFACE_STYLE_USAGE(.BOTH.,#7875);
+#7875 = SURFACE_SIDE_STYLE('',(#7876));
+#7876 = SURFACE_STYLE_FILL_AREA(#7877);
+#7877 = FILL_AREA_STYLE('',(#7878));
+#7878 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7879 = STYLED_ITEM('color',(#7880),#6003);
+#7880 = PRESENTATION_STYLE_ASSIGNMENT((#7881));
+#7881 = SURFACE_STYLE_USAGE(.BOTH.,#7882);
+#7882 = SURFACE_SIDE_STYLE('',(#7883));
+#7883 = SURFACE_STYLE_FILL_AREA(#7884);
+#7884 = FILL_AREA_STYLE('',(#7885));
+#7885 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7886 = STYLED_ITEM('color',(#7887),#6015);
+#7887 = PRESENTATION_STYLE_ASSIGNMENT((#7888));
+#7888 = SURFACE_STYLE_USAGE(.BOTH.,#7889);
+#7889 = SURFACE_SIDE_STYLE('',(#7890));
+#7890 = SURFACE_STYLE_FILL_AREA(#7891);
+#7891 = FILL_AREA_STYLE('',(#7892));
+#7892 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7893 = STYLED_ITEM('color',(#7894),#6032);
+#7894 = PRESENTATION_STYLE_ASSIGNMENT((#7895));
+#7895 = SURFACE_STYLE_USAGE(.BOTH.,#7896);
+#7896 = SURFACE_SIDE_STYLE('',(#7897));
+#7897 = SURFACE_STYLE_FILL_AREA(#7898);
+#7898 = FILL_AREA_STYLE('',(#7899));
+#7899 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7900 = STYLED_ITEM('color',(#7901),#6049);
+#7901 = PRESENTATION_STYLE_ASSIGNMENT((#7902));
+#7902 = SURFACE_STYLE_USAGE(.BOTH.,#7903);
+#7903 = SURFACE_SIDE_STYLE('',(#7904));
+#7904 = SURFACE_STYLE_FILL_AREA(#7905);
+#7905 = FILL_AREA_STYLE('',(#7906));
+#7906 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7907 = STYLED_ITEM('color',(#7908),#6066);
+#7908 = PRESENTATION_STYLE_ASSIGNMENT((#7909));
+#7909 = SURFACE_STYLE_USAGE(.BOTH.,#7910);
+#7910 = SURFACE_SIDE_STYLE('',(#7911));
+#7911 = SURFACE_STYLE_FILL_AREA(#7912);
+#7912 = FILL_AREA_STYLE('',(#7913));
+#7913 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7914 = STYLED_ITEM('color',(#7915),#6083);
+#7915 = PRESENTATION_STYLE_ASSIGNMENT((#7916));
+#7916 = SURFACE_STYLE_USAGE(.BOTH.,#7917);
+#7917 = SURFACE_SIDE_STYLE('',(#7918));
+#7918 = SURFACE_STYLE_FILL_AREA(#7919);
+#7919 = FILL_AREA_STYLE('',(#7920));
+#7920 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7921 = STYLED_ITEM('color',(#7922),#6100);
+#7922 = PRESENTATION_STYLE_ASSIGNMENT((#7923));
+#7923 = SURFACE_STYLE_USAGE(.BOTH.,#7924);
+#7924 = SURFACE_SIDE_STYLE('',(#7925));
+#7925 = SURFACE_STYLE_FILL_AREA(#7926);
+#7926 = FILL_AREA_STYLE('',(#7927));
+#7927 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7928 = STYLED_ITEM('color',(#7929),#6117);
+#7929 = PRESENTATION_STYLE_ASSIGNMENT((#7930));
+#7930 = SURFACE_STYLE_USAGE(.BOTH.,#7931);
+#7931 = SURFACE_SIDE_STYLE('',(#7932));
+#7932 = SURFACE_STYLE_FILL_AREA(#7933);
+#7933 = FILL_AREA_STYLE('',(#7934));
+#7934 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7935 = STYLED_ITEM('color',(#7936),#6134);
+#7936 = PRESENTATION_STYLE_ASSIGNMENT((#7937));
+#7937 = SURFACE_STYLE_USAGE(.BOTH.,#7938);
+#7938 = SURFACE_SIDE_STYLE('',(#7939));
+#7939 = SURFACE_STYLE_FILL_AREA(#7940);
+#7940 = FILL_AREA_STYLE('',(#7941));
+#7941 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7942 = STYLED_ITEM('color',(#7943),#6151);
+#7943 = PRESENTATION_STYLE_ASSIGNMENT((#7944));
+#7944 = SURFACE_STYLE_USAGE(.BOTH.,#7945);
+#7945 = SURFACE_SIDE_STYLE('',(#7946));
+#7946 = SURFACE_STYLE_FILL_AREA(#7947);
+#7947 = FILL_AREA_STYLE('',(#7948));
+#7948 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7949 = STYLED_ITEM('color',(#7950),#6168);
+#7950 = PRESENTATION_STYLE_ASSIGNMENT((#7951));
+#7951 = SURFACE_STYLE_USAGE(.BOTH.,#7952);
+#7952 = SURFACE_SIDE_STYLE('',(#7953));
+#7953 = SURFACE_STYLE_FILL_AREA(#7954);
+#7954 = FILL_AREA_STYLE('',(#7955));
+#7955 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7956 = STYLED_ITEM('color',(#7957),#6180);
+#7957 = PRESENTATION_STYLE_ASSIGNMENT((#7958));
+#7958 = SURFACE_STYLE_USAGE(.BOTH.,#7959);
+#7959 = SURFACE_SIDE_STYLE('',(#7960));
+#7960 = SURFACE_STYLE_FILL_AREA(#7961);
+#7961 = FILL_AREA_STYLE('',(#7962));
+#7962 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7963 = STYLED_ITEM('color',(#7964),#6197);
+#7964 = PRESENTATION_STYLE_ASSIGNMENT((#7965));
+#7965 = SURFACE_STYLE_USAGE(.BOTH.,#7966);
+#7966 = SURFACE_SIDE_STYLE('',(#7967));
+#7967 = SURFACE_STYLE_FILL_AREA(#7968);
+#7968 = FILL_AREA_STYLE('',(#7969));
+#7969 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7970 = STYLED_ITEM('color',(#7971),#6209);
+#7971 = PRESENTATION_STYLE_ASSIGNMENT((#7972));
+#7972 = SURFACE_STYLE_USAGE(.BOTH.,#7973);
+#7973 = SURFACE_SIDE_STYLE('',(#7974));
+#7974 = SURFACE_STYLE_FILL_AREA(#7975);
+#7975 = FILL_AREA_STYLE('',(#7976));
+#7976 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7977 = STYLED_ITEM('color',(#7978),#6226);
+#7978 = PRESENTATION_STYLE_ASSIGNMENT((#7979));
+#7979 = SURFACE_STYLE_USAGE(.BOTH.,#7980);
+#7980 = SURFACE_SIDE_STYLE('',(#7981));
+#7981 = SURFACE_STYLE_FILL_AREA(#7982);
+#7982 = FILL_AREA_STYLE('',(#7983));
+#7983 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7984 = STYLED_ITEM('color',(#7985),#6238);
+#7985 = PRESENTATION_STYLE_ASSIGNMENT((#7986));
+#7986 = SURFACE_STYLE_USAGE(.BOTH.,#7987);
+#7987 = SURFACE_SIDE_STYLE('',(#7988));
+#7988 = SURFACE_STYLE_FILL_AREA(#7989);
+#7989 = FILL_AREA_STYLE('',(#7990));
+#7990 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7991 = STYLED_ITEM('color',(#7992),#6255);
+#7992 = PRESENTATION_STYLE_ASSIGNMENT((#7993));
+#7993 = SURFACE_STYLE_USAGE(.BOTH.,#7994);
+#7994 = SURFACE_SIDE_STYLE('',(#7995));
+#7995 = SURFACE_STYLE_FILL_AREA(#7996);
+#7996 = FILL_AREA_STYLE('',(#7997));
+#7997 = FILL_AREA_STYLE_COLOUR('',#6799);
+#7998 = STYLED_ITEM('color',(#7999),#6267);
+#7999 = PRESENTATION_STYLE_ASSIGNMENT((#8000));
+#8000 = SURFACE_STYLE_USAGE(.BOTH.,#8001);
+#8001 = SURFACE_SIDE_STYLE('',(#8002));
+#8002 = SURFACE_STYLE_FILL_AREA(#8003);
+#8003 = FILL_AREA_STYLE('',(#8004));
+#8004 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8005 = STYLED_ITEM('color',(#8006),#6284);
+#8006 = PRESENTATION_STYLE_ASSIGNMENT((#8007));
+#8007 = SURFACE_STYLE_USAGE(.BOTH.,#8008);
+#8008 = SURFACE_SIDE_STYLE('',(#8009));
+#8009 = SURFACE_STYLE_FILL_AREA(#8010);
+#8010 = FILL_AREA_STYLE('',(#8011));
+#8011 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8012 = STYLED_ITEM('color',(#8013),#6296);
+#8013 = PRESENTATION_STYLE_ASSIGNMENT((#8014));
+#8014 = SURFACE_STYLE_USAGE(.BOTH.,#8015);
+#8015 = SURFACE_SIDE_STYLE('',(#8016));
+#8016 = SURFACE_STYLE_FILL_AREA(#8017);
+#8017 = FILL_AREA_STYLE('',(#8018));
+#8018 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8019 = STYLED_ITEM('color',(#8020),#6313);
+#8020 = PRESENTATION_STYLE_ASSIGNMENT((#8021));
+#8021 = SURFACE_STYLE_USAGE(.BOTH.,#8022);
+#8022 = SURFACE_SIDE_STYLE('',(#8023));
+#8023 = SURFACE_STYLE_FILL_AREA(#8024);
+#8024 = FILL_AREA_STYLE('',(#8025));
+#8025 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8026 = STYLED_ITEM('color',(#8027),#6325);
+#8027 = PRESENTATION_STYLE_ASSIGNMENT((#8028));
+#8028 = SURFACE_STYLE_USAGE(.BOTH.,#8029);
+#8029 = SURFACE_SIDE_STYLE('',(#8030));
+#8030 = SURFACE_STYLE_FILL_AREA(#8031);
+#8031 = FILL_AREA_STYLE('',(#8032));
+#8032 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8033 = STYLED_ITEM('color',(#8034),#6342);
+#8034 = PRESENTATION_STYLE_ASSIGNMENT((#8035));
+#8035 = SURFACE_STYLE_USAGE(.BOTH.,#8036);
+#8036 = SURFACE_SIDE_STYLE('',(#8037));
+#8037 = SURFACE_STYLE_FILL_AREA(#8038);
+#8038 = FILL_AREA_STYLE('',(#8039));
+#8039 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8040 = STYLED_ITEM('color',(#8041),#6354);
+#8041 = PRESENTATION_STYLE_ASSIGNMENT((#8042));
+#8042 = SURFACE_STYLE_USAGE(.BOTH.,#8043);
+#8043 = SURFACE_SIDE_STYLE('',(#8044));
+#8044 = SURFACE_STYLE_FILL_AREA(#8045);
+#8045 = FILL_AREA_STYLE('',(#8046));
+#8046 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8047 = STYLED_ITEM('color',(#8048),#6371);
+#8048 = PRESENTATION_STYLE_ASSIGNMENT((#8049));
+#8049 = SURFACE_STYLE_USAGE(.BOTH.,#8050);
+#8050 = SURFACE_SIDE_STYLE('',(#8051));
+#8051 = SURFACE_STYLE_FILL_AREA(#8052);
+#8052 = FILL_AREA_STYLE('',(#8053));
+#8053 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8054 = STYLED_ITEM('color',(#8055),#6383);
+#8055 = PRESENTATION_STYLE_ASSIGNMENT((#8056));
+#8056 = SURFACE_STYLE_USAGE(.BOTH.,#8057);
+#8057 = SURFACE_SIDE_STYLE('',(#8058));
+#8058 = SURFACE_STYLE_FILL_AREA(#8059);
+#8059 = FILL_AREA_STYLE('',(#8060));
+#8060 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8061 = STYLED_ITEM('color',(#8062),#6400);
+#8062 = PRESENTATION_STYLE_ASSIGNMENT((#8063));
+#8063 = SURFACE_STYLE_USAGE(.BOTH.,#8064);
+#8064 = SURFACE_SIDE_STYLE('',(#8065));
+#8065 = SURFACE_STYLE_FILL_AREA(#8066);
+#8066 = FILL_AREA_STYLE('',(#8067));
+#8067 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8068 = STYLED_ITEM('color',(#8069),#6417);
+#8069 = PRESENTATION_STYLE_ASSIGNMENT((#8070));
+#8070 = SURFACE_STYLE_USAGE(.BOTH.,#8071);
+#8071 = SURFACE_SIDE_STYLE('',(#8072));
+#8072 = SURFACE_STYLE_FILL_AREA(#8073);
+#8073 = FILL_AREA_STYLE('',(#8074));
+#8074 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8075 = STYLED_ITEM('color',(#8076),#6434);
+#8076 = PRESENTATION_STYLE_ASSIGNMENT((#8077));
+#8077 = SURFACE_STYLE_USAGE(.BOTH.,#8078);
+#8078 = SURFACE_SIDE_STYLE('',(#8079));
+#8079 = SURFACE_STYLE_FILL_AREA(#8080);
+#8080 = FILL_AREA_STYLE('',(#8081));
+#8081 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8082 = STYLED_ITEM('color',(#8083),#6451);
+#8083 = PRESENTATION_STYLE_ASSIGNMENT((#8084));
+#8084 = SURFACE_STYLE_USAGE(.BOTH.,#8085);
+#8085 = SURFACE_SIDE_STYLE('',(#8086));
+#8086 = SURFACE_STYLE_FILL_AREA(#8087);
+#8087 = FILL_AREA_STYLE('',(#8088));
+#8088 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8089 = STYLED_ITEM('color',(#8090),#6468);
+#8090 = PRESENTATION_STYLE_ASSIGNMENT((#8091));
+#8091 = SURFACE_STYLE_USAGE(.BOTH.,#8092);
+#8092 = SURFACE_SIDE_STYLE('',(#8093));
+#8093 = SURFACE_STYLE_FILL_AREA(#8094);
+#8094 = FILL_AREA_STYLE('',(#8095));
+#8095 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8096 = STYLED_ITEM('color',(#8097),#6485);
+#8097 = PRESENTATION_STYLE_ASSIGNMENT((#8098));
+#8098 = SURFACE_STYLE_USAGE(.BOTH.,#8099);
+#8099 = SURFACE_SIDE_STYLE('',(#8100));
+#8100 = SURFACE_STYLE_FILL_AREA(#8101);
+#8101 = FILL_AREA_STYLE('',(#8102));
+#8102 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8103 = STYLED_ITEM('color',(#8104),#6502);
+#8104 = PRESENTATION_STYLE_ASSIGNMENT((#8105));
+#8105 = SURFACE_STYLE_USAGE(.BOTH.,#8106);
+#8106 = SURFACE_SIDE_STYLE('',(#8107));
+#8107 = SURFACE_STYLE_FILL_AREA(#8108);
+#8108 = FILL_AREA_STYLE('',(#8109));
+#8109 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8110 = STYLED_ITEM('color',(#8111),#6519);
+#8111 = PRESENTATION_STYLE_ASSIGNMENT((#8112));
+#8112 = SURFACE_STYLE_USAGE(.BOTH.,#8113);
+#8113 = SURFACE_SIDE_STYLE('',(#8114));
+#8114 = SURFACE_STYLE_FILL_AREA(#8115);
+#8115 = FILL_AREA_STYLE('',(#8116));
+#8116 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8117 = STYLED_ITEM('color',(#8118),#6536);
+#8118 = PRESENTATION_STYLE_ASSIGNMENT((#8119));
+#8119 = SURFACE_STYLE_USAGE(.BOTH.,#8120);
+#8120 = SURFACE_SIDE_STYLE('',(#8121));
+#8121 = SURFACE_STYLE_FILL_AREA(#8122);
+#8122 = FILL_AREA_STYLE('',(#8123));
+#8123 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8124 = STYLED_ITEM('color',(#8125),#6548);
+#8125 = PRESENTATION_STYLE_ASSIGNMENT((#8126));
+#8126 = SURFACE_STYLE_USAGE(.BOTH.,#8127);
+#8127 = SURFACE_SIDE_STYLE('',(#8128));
+#8128 = SURFACE_STYLE_FILL_AREA(#8129);
+#8129 = FILL_AREA_STYLE('',(#8130));
+#8130 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8131 = STYLED_ITEM('color',(#8132),#6565);
+#8132 = PRESENTATION_STYLE_ASSIGNMENT((#8133));
+#8133 = SURFACE_STYLE_USAGE(.BOTH.,#8134);
+#8134 = SURFACE_SIDE_STYLE('',(#8135));
+#8135 = SURFACE_STYLE_FILL_AREA(#8136);
+#8136 = FILL_AREA_STYLE('',(#8137));
+#8137 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8138 = STYLED_ITEM('color',(#8139),#6577);
+#8139 = PRESENTATION_STYLE_ASSIGNMENT((#8140));
+#8140 = SURFACE_STYLE_USAGE(.BOTH.,#8141);
+#8141 = SURFACE_SIDE_STYLE('',(#8142));
+#8142 = SURFACE_STYLE_FILL_AREA(#8143);
+#8143 = FILL_AREA_STYLE('',(#8144));
+#8144 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8145 = STYLED_ITEM('color',(#8146),#6594);
+#8146 = PRESENTATION_STYLE_ASSIGNMENT((#8147));
+#8147 = SURFACE_STYLE_USAGE(.BOTH.,#8148);
+#8148 = SURFACE_SIDE_STYLE('',(#8149));
+#8149 = SURFACE_STYLE_FILL_AREA(#8150);
+#8150 = FILL_AREA_STYLE('',(#8151));
+#8151 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8152 = STYLED_ITEM('color',(#8153),#6606);
+#8153 = PRESENTATION_STYLE_ASSIGNMENT((#8154));
+#8154 = SURFACE_STYLE_USAGE(.BOTH.,#8155);
+#8155 = SURFACE_SIDE_STYLE('',(#8156));
+#8156 = SURFACE_STYLE_FILL_AREA(#8157);
+#8157 = FILL_AREA_STYLE('',(#8158));
+#8158 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8159 = STYLED_ITEM('color',(#8160),#6623);
+#8160 = PRESENTATION_STYLE_ASSIGNMENT((#8161));
+#8161 = SURFACE_STYLE_USAGE(.BOTH.,#8162);
+#8162 = SURFACE_SIDE_STYLE('',(#8163));
+#8163 = SURFACE_STYLE_FILL_AREA(#8164);
+#8164 = FILL_AREA_STYLE('',(#8165));
+#8165 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8166 = STYLED_ITEM('color',(#8167),#6635);
+#8167 = PRESENTATION_STYLE_ASSIGNMENT((#8168));
+#8168 = SURFACE_STYLE_USAGE(.BOTH.,#8169);
+#8169 = SURFACE_SIDE_STYLE('',(#8170));
+#8170 = SURFACE_STYLE_FILL_AREA(#8171);
+#8171 = FILL_AREA_STYLE('',(#8172));
+#8172 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8173 = STYLED_ITEM('color',(#8174),#6652);
+#8174 = PRESENTATION_STYLE_ASSIGNMENT((#8175));
+#8175 = SURFACE_STYLE_USAGE(.BOTH.,#8176);
+#8176 = SURFACE_SIDE_STYLE('',(#8177));
+#8177 = SURFACE_STYLE_FILL_AREA(#8178);
+#8178 = FILL_AREA_STYLE('',(#8179));
+#8179 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8180 = STYLED_ITEM('color',(#8181),#6664);
+#8181 = PRESENTATION_STYLE_ASSIGNMENT((#8182));
+#8182 = SURFACE_STYLE_USAGE(.BOTH.,#8183);
+#8183 = SURFACE_SIDE_STYLE('',(#8184));
+#8184 = SURFACE_STYLE_FILL_AREA(#8185);
+#8185 = FILL_AREA_STYLE('',(#8186));
+#8186 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8187 = STYLED_ITEM('color',(#8188),#6681);
+#8188 = PRESENTATION_STYLE_ASSIGNMENT((#8189));
+#8189 = SURFACE_STYLE_USAGE(.BOTH.,#8190);
+#8190 = SURFACE_SIDE_STYLE('',(#8191));
+#8191 = SURFACE_STYLE_FILL_AREA(#8192);
+#8192 = FILL_AREA_STYLE('',(#8193));
+#8193 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8194 = STYLED_ITEM('color',(#8195),#6693);
+#8195 = PRESENTATION_STYLE_ASSIGNMENT((#8196));
+#8196 = SURFACE_STYLE_USAGE(.BOTH.,#8197);
+#8197 = SURFACE_SIDE_STYLE('',(#8198));
+#8198 = SURFACE_STYLE_FILL_AREA(#8199);
+#8199 = FILL_AREA_STYLE('',(#8200));
+#8200 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8201 = STYLED_ITEM('color',(#8202),#6710);
+#8202 = PRESENTATION_STYLE_ASSIGNMENT((#8203));
+#8203 = SURFACE_STYLE_USAGE(.BOTH.,#8204);
+#8204 = SURFACE_SIDE_STYLE('',(#8205));
+#8205 = SURFACE_STYLE_FILL_AREA(#8206);
+#8206 = FILL_AREA_STYLE('',(#8207));
+#8207 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8208 = STYLED_ITEM('color',(#8209),#6722);
+#8209 = PRESENTATION_STYLE_ASSIGNMENT((#8210));
+#8210 = SURFACE_STYLE_USAGE(.BOTH.,#8211);
+#8211 = SURFACE_SIDE_STYLE('',(#8212));
+#8212 = SURFACE_STYLE_FILL_AREA(#8213);
+#8213 = FILL_AREA_STYLE('',(#8214));
+#8214 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8215 = STYLED_ITEM('color',(#8216),#6739);
+#8216 = PRESENTATION_STYLE_ASSIGNMENT((#8217));
+#8217 = SURFACE_STYLE_USAGE(.BOTH.,#8218);
+#8218 = SURFACE_SIDE_STYLE('',(#8219));
+#8219 = SURFACE_STYLE_FILL_AREA(#8220);
+#8220 = FILL_AREA_STYLE('',(#8221));
+#8221 = FILL_AREA_STYLE_COLOUR('',#6799);
+#8222 = STYLED_ITEM('color',(#8223),#6751);
+#8223 = PRESENTATION_STYLE_ASSIGNMENT((#8224));
+#8224 = SURFACE_STYLE_USAGE(.BOTH.,#8225);
+#8225 = SURFACE_SIDE_STYLE('',(#8226));
+#8226 = SURFACE_STYLE_FILL_AREA(#8227);
+#8227 = FILL_AREA_STYLE('',(#8228));
+#8228 = FILL_AREA_STYLE_COLOUR('',#8229);
+#8229 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986);
+#8230 = STYLED_ITEM('color',(#8231),#6776);
+#8231 = PRESENTATION_STYLE_ASSIGNMENT((#8232));
+#8232 = SURFACE_STYLE_USAGE(.BOTH.,#8233);
+#8233 = SURFACE_SIDE_STYLE('',(#8234));
+#8234 = SURFACE_STYLE_FILL_AREA(#8235);
+#8235 = FILL_AREA_STYLE('',(#8236));
+#8236 = FILL_AREA_STYLE_COLOUR('',#8229);
+ENDSEC;
+END-ISO-10303-21;