component
AT8222
Public Made by Adomby adom
ZHONGKEWEI Brushed DC Motor Drivers, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AT8222
ZHONGKEWEI · Brushed DC Motor Drivers · ESOP-8
AT8222 from ZHONGKEWEI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground; the GND pin and the exposed thermal pad must both be connected to power ground. |
| 2 | IN2 | input | Logic input that controls the H-bridge output state together with IN1 per the truth table, with logic-high VIH of 2 V to 5.25 V. |
| 3 | IN1 | input | Logic input that controls the H-bridge output state, with a built-in pull-down resistor (typically 100 kΩ), logic-high VIH of 2 V to 5.25 V, and PWM input frequency up to 100 kHz. |
| 4 | VREF | power_in | Reference voltage input that sets the H-bridge peak drive current; recommended range 0.5 V to 4 V. |
| 5 | VM | power_in | Chip and motor supply, recommended 5.5 V to 24 V (absolute maximum -0.3 V to 28 V), which requires supply filtering with at least 47 µF electrolytic capacitance placed close to the device. |
| 6 | OUT1 | output | H-bridge output 1; positive current is defined as flowing from OUT1 to OUT2, with peak output current of ±2.8 A. |
| 7 | ISEN | input | H-bridge current-sense input that connects to a sense resistor to ground, or directly to ground if current limiting is not needed, with a sense voltage limit of -0.3 V to 0.5 V. |
| 8 | OUT2 | output | H-bridge output 2, paired with OUT1; recommended continuous output current 1.5 A and peak output current 2.2 A. |
| 9 | PPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHONGKEWEI |
| Package | ESOP-8 |
| Category | Motor Driver ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VM) | VM | 5.5 | 24 | V | 3 | ||
| Continuous output current | IOUT | 0 | 1.5 | A | 3 | ||
| Peak output current | IPEAK | 0 | 2.2 | A | 3 | ||
| Logic input voltage | VIN | 0 | 5.25 | V | 3 | ||
| Logic input frequency | fPWM | 0 | 100 | kHZ | 3 | ||
| Reference voltage | VREF | 0.5 | 4 | V | 3 | ||
| Supply voltage (VM) absolute range | VM | -0.3 | 28 | V | TA = 25°C | 3 | |
| Peak output current | IPEAK | -2.8 | 2.8 | A | TA = 25°C | 3 | |
| Logic input voltage absolute range | VIN | -0.7 | 7 | V | TA = 25°C | 3 | |
| Sense voltage | VSENSE | -0.3 | 0.5 | V | TA = 25°C | 3 | |
| Operating temperature range (S) | TA | -40 | 85 | °C | TA Range S | 3 | |
| Maximum junction temperature | TJ(max) | 150 | °C | 3 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Quiescent supply current (VM) | IVM | 3 | 6 | mA | fPWM < 50 kHz | 4 | |
| VM undervoltage lockout threshold | VUVLO | 5.3 | 5.4 | V | VM 上升 | 4 | |
| Logic input low voltage | VIL | 0.5 | 0.7 | V | 4 | ||
| Logic input high voltage | VIH | 2 | 5.25 | V | 4 | ||
| Logic input current, low level | IIL | -1 | 1 | uA | VIN = 0 V | 4 | |
| Logic input current, high level | IIH | 33 | 100 | uA | VIN = 3.3 V | 4 | |
| Sleep entry delay | tSLEEP | 0.7 | 1 | ms | 4 | ||
| Output off leakage current | IOFF | -1 | 1 | uA | 4 | ||
| Overcurrent protection threshold | IOCP | 3.5 | 5 | 6 | A | 4 | |
| Thermal shutdown threshold | TSD | 150 | 155 | 170 | ℃ | 结温 | 4 |
| Junction-to-ambient thermal resistance (ESOP8) | θJA | 35 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
AT8222 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
at8222-etched.step/at8222-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at8222.step/at8222.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHONGKEWEI datasheet (10 pp, sha256
5e2007b24ff19882, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AT8222
**ZHONGKEWEI** · Brushed DC Motor Drivers · ESOP-8
AT8222 from ZHONGKEWEI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground; the GND pin and the exposed thermal pad must both be connected to power ground. |
| 2 | IN2 | input | Logic input that controls the H-bridge output state together with IN1 per the truth table, with logic-high VIH of 2 V to 5.25 V. |
| 3 | IN1 | input | Logic input that controls the H-bridge output state, with a built-in pull-down resistor (typically 100 kΩ), logic-high VIH of 2 V to 5.25 V, and PWM input frequency up to 100 kHz. |
| 4 | VREF | power_in | Reference voltage input that sets the H-bridge peak drive current; recommended range 0.5 V to 4 V. |
| 5 | VM | power_in | Chip and motor supply, recommended 5.5 V to 24 V (absolute maximum -0.3 V to 28 V), which requires supply filtering with at least 47 µF electrolytic capacitance placed close to the device. |
| 6 | OUT1 | output | H-bridge output 1; positive current is defined as flowing from OUT1 to OUT2, with peak output current of ±2.8 A. |
| 7 | ISEN | input | H-bridge current-sense input that connects to a sense resistor to ground, or directly to ground if current limiting is not needed, with a sense voltage limit of -0.3 V to 0.5 V. |
| 8 | OUT2 | output | H-bridge output 2, paired with OUT1; recommended continuous output current 1.5 A and peak output current 2.2 A. |
| 9 | PPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHONGKEWEI |
| Package | ESOP-8 |
| Category | Motor Driver ICs |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VM) | VM | 5.5 | | 24 | V | | 3 |
| Continuous output current | IOUT | 0 | | 1.5 | A | | 3 |
| Peak output current | IPEAK | 0 | | 2.2 | A | | 3 |
| Logic input voltage | VIN | 0 | | 5.25 | V | | 3 |
| Logic input frequency | fPWM | 0 | | 100 | kHZ | | 3 |
| Reference voltage | VREF | 0.5 | | 4 | V | | 3 |
| Supply voltage (VM) absolute range | VM | -0.3 | | 28 | V | TA = 25°C | 3 |
| Peak output current | IPEAK | -2.8 | | 2.8 | A | TA = 25°C | 3 |
| Logic input voltage absolute range | VIN | -0.7 | | 7 | V | TA = 25°C | 3 |
| Sense voltage | VSENSE | -0.3 | | 0.5 | V | TA = 25°C | 3 |
| Operating temperature range (S) | TA | -40 | | 85 | °C | TA Range S | 3 |
| Maximum junction temperature | TJ(max) | | | 150 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 3 |
| Quiescent supply current (VM) | IVM | | 3 | 6 | mA | fPWM < 50 kHz | 4 |
| VM undervoltage lockout threshold | VUVLO | | 5.3 | 5.4 | V | VM 上升 | 4 |
| Logic input low voltage | VIL | | 0.5 | 0.7 | V | | 4 |
| Logic input high voltage | VIH | 2 | | 5.25 | V | | 4 |
| Logic input current, low level | IIL | -1 | | 1 | uA | VIN = 0 V | 4 |
| Logic input current, high level | IIH | | 33 | 100 | uA | VIN = 3.3 V | 4 |
| Sleep entry delay | tSLEEP | | 0.7 | 1 | ms | | 4 |
| Output off leakage current | IOFF | -1 | | 1 | uA | | 4 |
| Overcurrent protection threshold | IOCP | 3.5 | 5 | 6 | A | | 4 |
| Thermal shutdown threshold | TSD | 150 | 155 | 170 | ℃ | 结温 | 4 |
| Junction-to-ambient thermal resistance (ESOP8) | θJA | | 35 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `AT8222`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `at8222-etched.step` / `at8222-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `at8222.step` / `at8222.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ZHONGKEWEI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784511573110784) (10 pp, sha256 `5e2007b24ff19882`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/at8222-datasheet.pdf)