component
AT6N139-CuH-D
Public Made by Adomby adom
AOTE Logic Output Optocoupler, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAT6N139-CuH-D
AOTE · Logic Output Optocoupler · DIP-8
AT6N139-CuH-D from AOTE, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | Anode | passive | LED anode input; recommended forward input current IF(ON) is 0.5 to 12.0 mA, absolute maximum IF is 50 mA. |
| 3 | Cathode | passive | LED cathode input; reverse voltage is limited to 5 V and the recommended OFF forward input voltage is 0 to 0.8 V. |
| 4 | NC | unconnected | No connection. |
| 5 | GND | power_in | Ground for the output-side detector circuit. |
| 6 | VO | output | Open-collector Darlington output; VCEO is 80 V max and collector current IC is 50 mA max. |
| 7 | VB | power_in | Base connection of the Darlington phototransistor's first stage, brought out for bandwidth or bias adjustment. |
| 8 | VCC | power_in | Supply voltage pin with a recommended range of 4.5 to 18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AOTE |
| Package | DIP-8 |
| Category | Optocoupler |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Current | IF | 50 | mA | 3 | |||
| Peak forward current | IFP | 1000 | mA | 1us, pulse | 3 | ||
| Reverse Voltage | VR | 5 | V | 3 | |||
| Power Dissipation | PD | 70 | mW | 3 | |||
| Collector Power Dissipation | PC | 150 | mW | 3 | |||
| Collector Current | IC | 50 | mA | 3 | |||
| Collector-Emitter Voltage | VCEO | 80 | V | 3 | |||
| Emitter-Collector Voltage | VECO | 7 | V | 3 | |||
| Isolation Voltage | Viso | 5000 | Vrms | 3 | |||
| Operating Temperature | Topr | -55 | 110 | ℃ | 3 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Soldering Temperature | Tsol | 260 | ℃ | 3 | |||
| Supply Voltage | VCC | 4.5 | 18 | V | 3 | ||
| Forward Input Current (ON) | IF(ON) | 0.5 | 12 | mA | 3 | ||
| Forward Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 3 | ||
| High Level Supply Current | ICCH | 0.4 | 1.5 | mA | IF=1.6 mA, VO =Open, VCC=18V | 4 | |
| Low Level Supply Current | ICCL | 0.01 | 10 | μA | IF= 0 mA, VO =Open, VCC=18V | 4 | |
| Reverse Current | IR | 10 | uA | VR =5V | 4 | ||
| LOW Level Output Voltage | VOL | 0.1 | 0.2 | V | IF = 0.5 mA, IO =2 mA VCC=4.5V | 4 | |
| HIGH Level Output Current | IOH | 0.05 | 100 | μA | VO =VCC=18 V, IF =0mA | 4 | |
| Current Transfer Ratio | CTR | 400 | 2000 | % | IF =0.5 mA, VCC=4.5V, VO =0.4 V | 4 | |
| Current Transfer Ratio | CTR | 500 | 1600 | % | IF =1.6 mA, VCC=4.5V, VO =0.4 V | 4 | |
| Isolation Voltage | VISO | 5000 | Vrms | RH < 50%, t = 1 min., TA = 25°C | 4 | ||
| Common Mode Transient Immunity at High Output Level | /CMH/ | 1000 | 10000 | V/µs | IF =0 mA, TA = 25°C, Rl = 2.2 kΩ, /VCM/ = 10Vp-p | 5 | |
| Common Mode Transient Immunity at Low Output Level | /CML/ | 1000 | 10000 | V/µs | IF =1.6 mA, TA = 25°C, Rl = 2.2 kΩ, /VCM/ = 10Vp-p | 5 | |
| Propagation Delay Time to High Output Level | tPHL | 5 | 30 | μs | IF =0.5 mA, Rl = 4.7 kΩ | 5 | |
| Propagation Delay Time to High Output Level | tPHL | 5 | 25 | μs | IF = 0.5 mA, Rl = 4.7 kΩ, TA =25°C | 5 | |
| Propagation Delay Time to High Output Level | tPHL | 0.2 | 2 | μs | IF =12 mA, Rl = 270 Ω | 5 | |
| Propagation Delay Time to High Output Level | tPHL | 0.2 | 1 | μs | IF =12 mA, Rl = 270 Ω, TA =25°C | 5 | |
| Propagation Delay Time to Low Output Level | tPLH | 18 | 90 | μs | IF = 0.5 mA, Rl = 4.7 kΩ | 5 | |
| Propagation Delay Time to Low Output Level | tPLH | 18 | 60 | μs | IF =0.5 mA, Rl = 4.7 kΩ, TA =25°C | 5 | |
| Propagation Delay Time to Low Output Level | tPLH | 2 | 10 | μs | IF =12mA, Rl=270 Ω | 5 | |
| Propagation Delay Time to Low Output Level | tPLH | 2 | 7 | μs | IF =12mA, Rl=270 Ω, TA =25°C | 5 | |
| Input Diode Forward Voltage | VF | 1.4 | V | IF=20mA | 4 | ||
| Terminal Capacitance | Ct | 60 | pF | V=0V, F =1KHz | 4 | ||
| Input Diode Temperature Coefficient | ∆VF/∆TA | -1.8 | mV/°C | IF =16mA | 4 | ||
| Capacitance (Input to Output) | CI-O | 0.6 | pF | f = 1 MHz | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | ③ 框架类型 Lead Frame（Cu: 铜框架 Copper） | 10 |
CAD (KiCad official)
- Symbol:
AT6N139-CuH-D - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
at6n139-cuh-d-etched.step/at6n139-cuh-d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at6n139-cuh-d.step/at6n139-cuh-d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AOTE datasheet (14 pp, sha256
7c176c88bd5600ba, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).