component

AT45DB161E-SHD-T

Public Made by Adom

by adom

Dialog Semiconductor Adesto Adesto Technologies NOR FLASH, SOIC-8-208mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemoryat45db161e-shd-t
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs at45db161e-shd-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 2mo ago
at45db161e-shd-t-etched.fit.json at45db161e-shd-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
at45db161e-shd-t-etched.glb at45db161e-shd-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
at45db161e-shd-t-etched.step at45db161e-shd-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
at45db161e-shd-t.glb Publish 0.1.0 · Ray 2mo ago
at45db161e-shd-t.kicad_mod Publish 0.1.0 · Ray 2mo ago
at45db161e-shd-t.kicad_sym Publish 0.1.0 · Ray 2mo ago
at45db161e-shd-t.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray 2mo ago
at45db161e-shd-t.step Publish 0.1.0 · Ray 2mo ago
package.json Publish 0.2.0 · Ray 2mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 2mo ago
page.json at45db161e-shd-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 28d ago
README.md at45db161e-shd-t: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago

AT45DB161E-SHD-T

Dialog Semiconductor Adesto Adesto Technologies · NOR FLASH · SOIC-8-208mil

AT45DB161E-SHD-T from Dialog Semiconductor Adesto Adesto Technologies, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SI input Serial Input (MOSI). Shifts command, address, and write data into the device; latched on the rising edge of SCK. Ignored while CS is deasserted (high).
2 SCK input Serial Clock. Provides the clock reference for the SPI interface; SI is sampled on the rising edge and SO is driven on the falling edge. Supports up to 85 MHz in RapidS mode.
3 RESET input Active-low hardware reset. A low level terminates any operation in progress and holds the internal state machine in idle; normal operation resumes when driven high. Internal power-on reset covers power-up; tie high externally if unused.
4 CS input Active-low chip select. A high-to-low transition starts an SPI operation; a low-to-high transition ends it. When high, the device is deselected, SO goes high-Z, and SI is ignored (device normally enters standby).
5 WP input Active-low write protect. When asserted, all sectors marked in the Sector Protection Register are protected against program/erase regardless of software protection state; the Sector Protection Register itself becomes non-modifiable. Internally pulled high; may be left floating but tying to VCC is recommended.
6 VCC power_in Device power supply. 2.5 V to 3.6 V for the -SHD- (D) voltage option. Operation outside the valid VCC range may produce spurious results.
7 GND power_in Ground reference for the power supply. Connect to system ground.
8 SO output Serial Output (MISO). Shifts data out of the device on the falling edge of SCK. High-impedance while CS is deasserted (high). Clock-to-output time tV of 6 ns maximum.

Key specifications

Parameter Value
Manufacturer Dialog Semiconductor Adesto Adesto Technologies
Package SOIC-8-208mil
Category Memory
Pins 8

Ordering variants

  • AT45DB161E-SHD-TSHD-B
  • AT45DB161E-SHD-T
  • AT45DB161E-SHD-TSHF-B
  • AT45DB161E-SHD-TSHF-T
  • AT45DB161E-SHD-TSHD2B-T
  • AT45DB161E-SHD-TSHF2B-T
  • AT45DB161E-SHD-TSHFHA-T
  • AT45DB161E-SHD-TSHFHC-T
  • AT45DB161E-SHD-TSSHD-B
  • AT45DB161E-SHD-TSSHD-T
  • AT45DB161E-SHD-TSSHF-B
  • AT45DB161E-SHD-TSSHF-T
  • AT45DB161E-SHD-TSSHD2B-T
  • AT45DB161E-SHD-TSSHF2B-T
  • AT45DB161E-SHD-TSSHFHA-T
  • AT45DB161E-SHD-TSSHFHC-T
  • AT45DB161E-SHD-TMHD-Y
  • AT45DB161E-SHD-TMHD-T
  • AT45DB161E-SHD-TMHF-Y
  • AT45DB161E-SHD-TMHF-T
  • AT45DB161E-SHD-TMHD2B-T
  • AT45DB161E-SHD-TMHF2B-T
  • AT45DB161E-SHD-TCCUD-T

CAD (KiCad official)

  • Symbol: AT45DB161E-SHD-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-208mil (KiCad packages3D, STEP)
  • 3D model files: at45db161e-shd-t-etched.step / at45db161e-shd-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at45db161e-shd-t.step / at45db161e-shd-t.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
at45db161e-shd-t.step 122 KB You want the bare part, or you mark your own boards.
at45db161e-shd-t-etched.step 2.4 MB You want the part with AT45DB161E-SHD-T already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 632 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Dialog Semiconductor Adesto Adesto Technologies datasheet (73 pp, sha256 6ce69d9e374fdde0, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF