component
AT25SF041B-SSHB-B
Public Made by Adomby adom
Dialog/Adesto NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAT25SF041B-SSHB-B
Dialog/Adesto · NOR FLASH · SOIC-8
AT25SF041B-SSHB-B from Dialog/Adesto, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip select is active low: a high-to-low transition starts an operation and a low-to-high transition ends it, and a 10k Ohm pull-up from CS to VCC is recommended for power-up sequencing. |
| 2 | SO (IO1) | bidirectional | Serial output is clocked out on the falling edge of SCK and is high-impedance when the device is deselected; it serves as IO1 in the dual and quad read commands. |
| 3 | WP (IO2) | bidirectional | Write protect is internally pulled high and can be left floating, and it is asserted low to protect the Status Registers only when QE = 0 and SRP1/SRP0 = 0/1; when QE = 1 it is used as IO2 and must not be used for write protection. |
| 4 | GND | power_in | Ground reference for the power supply, to be connected to system ground. |
| 5 | SI (IO0) | bidirectional | Serial input carries all command, address and data input and is latched on the rising edge of SCK, and it becomes IO0 in the dual and quad output read commands and is ignored while the device is deselected. |
| 6 | SCK | input | Serial clock: SI is latched in on the rising edge of SCK and SO is clocked out on the falling edge of SCK. |
| 7 | HOLD (IO3) | bidirectional | HOLD pauses serial communication without resetting the clock sequence while CS is low, is internally pulled high and can be left floating, and becomes IO3 when QE = 1. |
| 8 | VCC | power_in | Device power supply pin that supplies the source voltage to the device, specified at 2.7 V to 3.6 V for this ordering code. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Dialog/Adesto |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature under Bias | -55 | 125 | °C | 50 | |||
| Storage Temperature | -65 | 150 | °C | 50 | |||
| All Input Voltages (including NC Pins) with Respect to Ground | -0.5 | 4 | V | with respect to ground | 50 | ||
| All Output Voltages with Respect to Ground | -0.6 | V | with respect to ground; max printed as VCC + 0.5 V | 50 | |||
| Operating Temperature (Case) | -40 | 85 | °C | 50 | |||
| VCC Power Supply | VCC | 2.7 | 3.6 | V | B variant (2.7 V to 3.6 V) | 50 | |
| Minimum VCC to Chip Select Low Time | tVSL | 70 | µs | 52 |
CAD (KiCad official)
- Symbol:
AT25SF041B-SSHB-B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
at25sf041b-sshb-b-etched.step/at25sf041b-sshb-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at25sf041b-sshb-b.step/at25sf041b-sshb-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Dialog/Adesto datasheet (60 pp, sha256
f21609cd0e2ce4d1, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).