AT25PE80-SSHN-T

{
  "schema_version": 1,
  "type": "component",
  "slug": "at25pe80-sshn-t",
  "title": "AT25PE80-SSHN-T",
  "brief": "Adesto Technologies NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "at25pe80-sshn-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "AT25PE80-SSHN-T",
    "manufacturer": "Adesto Technologies",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/13f57a5e93076744fe0776afa15e80a4.pdf",
    "parts": {
      "symbol": "at25pe80-sshn-t.kicad_sym",
      "footprint": "at25pe80-sshn-t.kicad_mod",
      "model_3d": "at25pe80-sshn-t-hero.glb",
      "model_3d_plain": "at25pe80-sshn-t-etched.glb",
      "model_3d_step": "at25pe80-sshn-t-etched.step",
      "model_3d_step_plain": "at25pe80-sshn-t.step",
      "lbr": "at25pe80-sshn-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2061696",
      "digikey": "1265-1328-2-ND",
      "mouser": "988-AT25PE80-SSHN-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:13:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1265-1328-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "988-AT25PE80-SSHN-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip Select, active low: asserting CS selects the device, and deasserting it deselects the device, places it in standby (not Deep Power-Down), forces SO to high impedance, and causes SI to be ignored."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "output",
        "description": "Serial Output: data is clocked out on the falling edge of SCK, and the pin is high impedance whenever the device is deselected (CS deasserted)."
      },
      {
        "number": "3",
        "name": "WP",
        "type": "input",
        "description": "Write Protect, active low: when asserted, sectors listed in the Sector Protection Register are protected against program and erase, and program/erase commands are ignored; the pin is internally pulled high and should preferably be connected to VCC."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply, to be connected to system ground."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial Input for all command, address and data input, latched on the rising edge of SCK and ignored whenever the device is deselected."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Clock: command, address and input data on SI are latched on the rising edge, and output data on SO is clocked out on the falling edge."
      },
      {
        "number": "7",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset: a low level terminates the operation in progress and returns the internal state machine to idle while held low; if the feature is unused it should be driven high externally."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply pin; the device operates from a single 1.7V to 3.6V supply, and operation at invalid VCC voltages may produce spurious results."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering-code table in the text is flattened, so the mapping of AT25PE80-SSHN-T to package 8S1 (; Pin numbers and assignments come from the 8-lead SOIC top-view figure (page 2): left column 1-4 is C"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0416,
        "at": "2026-10-30T17:13:27"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/13f57a5e93076744fe0776afa15e80a4.pdf",
        "pages": 62,
        "sha256": "ffe00f4808a37652",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at25pe80-sshn-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at25pe80-sshn-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7a809cd48821a8f48d4cf87f1b4929434a31eeb968fb17819554f4ee1526909d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "8S1",
      "source_page": 58,
      "D": {
        "nom_mm": 4.925,
        "range_mm": [
          4.8,
          5.05
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.81,
          3.99
        ]
      },
      "E": {
        "nom_mm": 5.995,
        "range_mm": [
          5.79,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.55,
        "range_mm": [
          1.35,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "at25pe80-sshn-t.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Adesto Technologies",
      "Package": "SOIC-8",
      "Category": "Memory",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "ffe00f4808a376524ac785d6fdef2d5b7b30c09e8fdac2f05cc50b5fc6acbe13",
      "rows": [
        {
          "name": "Ultra-Deep Power-Down Current",
          "symbol": "IUDPD",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.4,
          "max": 1,
          "conditions": "CS= VCC. All other inputs at 0V or VCC",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Deep Power-Down Current",
          "symbol": "IDPD",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 4.5,
          "max": 12,
          "conditions": "CS= VCC. All other inputs at 0V or VCC",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Standby Current",
          "symbol": "ISB",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 25,
          "max": 40,
          "conditions": "CS= VCC. All other inputs at 0V or VCC",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Low Power Read (01h) Operation",
          "symbol": "ICC1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 6,
          "max": 9,
          "conditions": "f = 1MHz; IOUT = 0mA",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Low Power Read (01h) Operation",
          "symbol": "ICC1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 7,
          "max": 10,
          "conditions": "f = 15MHz; IOUT = 0mA",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Read Operation",
          "symbol": "ICC2",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 10,
          "max": 12,
          "conditions": "f = 50MHz; IOUT = 0mA",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Read Operation",
          "symbol": "ICC2",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 12,
          "max": 15,
          "conditions": "f = 85MHz; IOUT = 0mA",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Program Operation",
          "symbol": "ICC3",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 14,
          "max": 16,
          "conditions": "CS = VCC",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Active Current, Erase Operation",
          "symbol": "ICC4",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 8,
          "max": 12,
          "conditions": "CS = VCC",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Input Load Current",
          "symbol": "ILI",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "All inputs at CMOS levels",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Output Leakage Current",
          "symbol": "ILO",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "All inputs at CMOS levels",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "×VCC",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "Printed as VCC x 0.3; min cell blank",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "×VCC",
          "min": 0.7,
          "typ": null,
          "max": null,
          "conditions": "Printed as VCC x 0.7 (min)",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V above VCC",
          "min": null,
          "typ": null,
          "max": 0.6,
          "conditions": "Printed as VCC + 0.6 (max)",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Output Low Voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 100µA",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V below VCC",
          "min": 0.2,
          "typ": null,
          "max": null,
          "conditions": "IOH = -100µA; printed as VCC - 0.2V (min)",
          "source_page": 41,
          "source": "datasheet"
        },
        {
          "name": "SCK Frequency",
          "symbol": "fSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 85,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Frequency for Continuous Read (0x0B)",
          "symbol": "fCAR1",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 85,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Frequency for Continuous Read (0x03) (Low Frequency)",
          "symbol": "fCAR2",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Frequency for Continuous Read (Low Power Mode – 01h Opcode)",
          "symbol": "fCAR3",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Frequency for Continuous Read (0x1B)",
          "symbol": "fCAR4",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 85,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK High Time",
          "symbol": "tWH",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Low Time",
          "symbol": "tWL",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Rise Time, Peak-to-peak",
          "symbol": "tSCKR",
          "kind": "timing",
          "unit": "V/ns",
          "min": 0.1,
          "typ": null,
          "max": null,
          "conditions": "Characterized, not 100% tested",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "SCK Fall Time, Peak-to-peak",
          "symbol": "tSCKF",
          "kind": "timing",
          "unit": "V/ns",
          "min": 0.1,
          "typ": null,
          "max": null,
          "conditions": "Characterized, not 100% tested",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Minimum CS High Time",
          "symbol": "tCS",
          "kind": "timing",
          "unit": "ns",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "CS Setup Time",
          "symbol": "tCSS",
          "kind": "timing",
          "unit": "ns",
          "min": 6,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "CS Hold Time",
          "symbol": "tCSH",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Data In Setup Time",
          "symbol": "tSU",
          "kind": "timing",
          "unit": "ns",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Data In Hold Time",
          "symbol": "tH",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Output Hold Time",
          "symbol": "tHO",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Output Disable Time",
          "symbol": "tDIS",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "Characterized, not 100% tested; 1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Output Valid",
          "symbol": "tV",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "WP Low to Protection Enabled",
          "symbol": "tWPE",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "WP High to Protection Disabled",
          "symbol": "tWPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "CS High to Ultra-Deep Power-Down",
          "symbol": "tEUDPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "Characterized, not 100% tested",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Minimum CS Low Time to Exit Ultra-Deep Power-Down",
          "symbol": "tCSLU",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Exit Ultra-Deep Power-Down Time",
          "symbol": "tXUDPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "CS High to Deep Power-Down",
          "symbol": "tEDPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "Characterized, not 100% tested",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Resume from Deep Power-Down Time",
          "symbol": "tRDPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 35,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Page to Buffer Transfer Time",
          "symbol": "tXFR",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Page to Buffer Compare Time",
          "symbol": "tCOMP",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "RESET Pulse Width",
          "symbol": "tRST",
          "kind": "timing",
          "unit": "µs",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "RESET Recovery Time",
          "symbol": "tREC",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Software Reset Time",
          "symbol": "tSWRST",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "1.7V to 3.6V column",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Page Erase and Programming Time (256/264 bytes)",
          "symbol": "tEP",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 15,
          "max": 55,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Page Programming Time",
          "symbol": "tP",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 2,
          "max": 4,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Page Erase Time",
          "symbol": "tPE",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 12,
          "max": 50,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Block Erase Time",
          "symbol": "tBE",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 30,
          "max": 75,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Sector Erase Time",
          "symbol": "tSE",
          "kind": "timing",
          "unit": "s",
          "min": null,
          "typ": 0.7,
          "max": 1.3,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Chip Erase Time",
          "symbol": "tCE",
          "kind": "timing",
          "unit": "s",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "1.7V to 3.6V column",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Byte Programming Time",
          "symbol": "tBP",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 8,
          "max": null,
          "conditions": "1.7V to 3.6V column; single value, placed in typ",
          "source_page": 43,
          "source": "datasheet"
        },
        {
          "name": "Output Voltages with Respect to Ground",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": 4.2,
          "conditions": "Max VCC of 3.6V + 0.6V",
          "source_page": 40,
          "source": "datasheet"
        },
        {
          "name": "Input Voltages with Respect to Ground",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": 4.2,
          "conditions": "Excluding VCC pin, including NC pins; max VCC of 3.6V + 0.6V",
          "source_page": 40,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 40,
          "source": "datasheet"
        },
        {
          "name": "Temperature under Bias",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 40,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature (Case) Industrial",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Case, industrial grade",
          "source_page": 40,
          "source": "datasheet"
        },
        {
          "name": "VCC Power Supply",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 40,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "at25pe80-sshn-t"
  ],
  "discovery_pitch": "AT25PE80-SSHN-T (Adesto Technologies) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at25pe80-sshn-t.kicad_sym",
    "at25pe80-sshn-t.kicad_mod",
    "at25pe80-sshn-t.glb",
    "at25pe80-sshn-t.step",
    "at25pe80-sshn-t.lbr",
    "docs/hero.png",
    "docs/at25pe80-sshn-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at25pe80-sshn-t-hero.glb",
    "at25pe80-sshn-t-hero.overlay.json",
    "at25pe80-sshn-t-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}