AT25M02-SSHM-T

{
  "slug": "at25m02-sshm-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "at25m02-sshm-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at25m02-sshm-t.kicad_sym",
    "at25m02-sshm-t.kicad_mod",
    "at25m02-sshm-t.glb",
    "at25m02-sshm-t.step",
    "at25m02-sshm-t.lbr",
    "docs/hero.png",
    "docs/at25m02-sshm-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at25m02-sshm-t-hero.glb",
    "at25m02-sshm-t-hero.overlay.json",
    "at25m02-sshm-t-etched.glb"
  ],
  "component": {
    "mpn": "AT25M02-SSHM-T",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/cc07e4076d58d031ef7e1280f289f4e1.pdf",
    "parts": {
      "symbol": "at25m02-sshm-t.kicad_sym",
      "footprint": "at25m02-sshm-t.kicad_mod",
      "model_3d": "at25m02-sshm-t-hero.glb",
      "model_3d_plain": "at25m02-sshm-t-etched.glb",
      "model_3d_step": "at25m02-sshm-t-etched.step",
      "model_3d_step_plain": "at25m02-sshm-t.step",
      "lbr": "at25m02-sshm-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2061882",
      "digikey": "AT25M02-SSHM-TTR-ND",
      "mouser": "579-AT25M02-SSHM-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T00:26:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AT25M02-SSHM-TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "579-AT25M02-SSHM-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip Select is active low, so the device is selected only when CS is low; when deselected, SI data is not accepted and SO stays high-impedance, and CS should be pulled up to VCC with a resistor of 10 kOhm or less."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "output",
        "description": "Serial Data Output shifts read data out after the falling edge of SCK and remains in a high-impedance state when the device is not selected."
      },
      {
        "number": "3",
        "name": "WP",
        "type": "input",
        "description": "Write-Protect driven low while WPEN is 1 inhibits all STATUS register write operations, the pin is blocked when WPEN is 0, and it should be driven high or low as appropriate."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground is the reference for the device power supply and should be connected to the system ground."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial Data Input receives instructions, addresses and data, which are latched on the rising edge of SCK."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Data Clock synchronizes communication, latching SI on its rising edge and clocking SO out on its falling edge."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "HOLD, used together with CS, pauses serial communication when brought low while SCK is low and resumes when brought high while SCK is low, and it should be driven high or low as appropriate."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device Power Supply supplies the source voltage to the device, and operation at invalid VCC voltages may produce spurious results and should not be attempted."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": null,
        "consensus": "skipped (clean text read)",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 19,
        "cost_usd": 0.001,
        "at": "2026-10-27T00:25:50"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/cc07e4076d58d031ef7e1280f289f4e1.pdf",
        "pages": 37,
        "sha256": "18d23e907911498f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at25m02-sshm-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at25m02-sshm-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "955600a63b3bcc58827358a5bb493a19e6e70a40209568c3b4842af1e7fbf451",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}