AT25010B-SSHL-T

{
  "schema_version": 1,
  "type": "component",
  "slug": "at25010b-sshl-t",
  "title": "AT25010B-SSHL-T",
  "brief": "Microchip EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "at25010b-sshl-t"
  ],
  "component": {
    "mpn": "AT25010B-SSHL-T",
    "manufacturer": "Microchip",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0f69b2b0803f411ca374c7a10faa9023.pdf",
    "parts": {
      "symbol": "at25010b-sshl-t.kicad_sym",
      "footprint": "at25010b-sshl-t.kicad_mod",
      "model_3d": "at25010b-sshl-t-etched.glb",
      "model_3d_plain": "at25010b-sshl-t.glb",
      "model_3d_step": "at25010b-sshl-t-etched.step",
      "model_3d_step_plain": "at25010b-sshl-t.step",
      "lbr": "at25010b-sshl-t.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select. Device is enabled when CS is low; when high, SO is high-impedance and SI is ignored. Every instruction must begin with a high-to-low CS transition."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "output",
        "description": "Serial Data Output. Data is shifted out MSB-first on the falling edge of SCK. Tri-stated (HI-Z) when the device is deselected or HOLD is asserted."
      },
      {
        "number": "3",
        "name": "WP",
        "type": "input",
        "description": "Active-low hardware Write Protect. When held high, normal read/write operations proceed. When brought low, all write operations are inhibited; if brought low while CS is still low it will interrupt a pending write (unless the internal write cycle has already begun)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all supply and signal pins."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "input",
        "description": "Serial Data Input. Opcodes, addresses, and write data are clocked in MSB-first on the rising edge of SCK."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Data Clock. Master-driven SPI clock; supports SPI modes 0 (0,0) and 3 (1,1). Max 20 MHz at Vcc = 4.5-5.5 V, 10 MHz at 2.5-5.5 V, 5 MHz at 1.8-5.5 V."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "Active-low serial hold. Pauses serial communication with the master without resetting the sequence. Bringing HOLD low while SCK is low pauses the transfer and forces SO to HI-Z; returning HOLD high (with SCK low) resumes it."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage. Operating range 1.8 V to 5.5 V; absolute max 6.25 V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0f69b2b0803f411ca374c7a10faa9023.pdf",
        "pages": 27,
        "sha256": "749d79a26a35f163",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at25010b-sshl-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at25010b-sshl-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f3f15b3c288ee7903900f0b5c62c6b5033c3026f6c9ed94cbac5cafba0f38664",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip",
      "Package": "SOP-8",
      "Category": "Memory",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "at25010b-sshl-t"
  ],
  "discovery_pitch": "AT25010B-SSHL-T (Microchip) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at25010b-sshl-t.kicad_sym",
    "at25010b-sshl-t.kicad_mod",
    "at25010b-sshl-t.glb",
    "at25010b-sshl-t.step",
    "at25010b-sshl-t-etched.step",
    "at25010b-sshl-t.lbr",
    "docs/hero.png",
    "docs/at25010b-sshl-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T17:10:17.048Z"
}