AT24MAC602-SSHM-T

{
  "slug": "at24mac602-sshm-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "at24mac602-sshm-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at24mac602-sshm-t.kicad_sym",
    "at24mac602-sshm-t.kicad_mod",
    "at24mac602-sshm-t.glb",
    "at24mac602-sshm-t.step",
    "at24mac602-sshm-t.lbr",
    "docs/hero.png",
    "docs/at24mac602-sshm-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at24mac602-sshm-t-hero.glb",
    "at24mac602-sshm-t-hero.overlay.json",
    "at24mac602-sshm-t-etched.glb"
  ],
  "component": {
    "mpn": "AT24MAC602-SSHM-T",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589802722422919168",
    "parts": {
      "symbol": "at24mac602-sshm-t.kicad_sym",
      "footprint": "at24mac602-sshm-t.kicad_mod",
      "model_3d": "at24mac602-sshm-t-hero.glb",
      "model_3d_plain": "at24mac602-sshm-t-etched.glb",
      "model_3d_step": "at24mac602-sshm-t-etched.step",
      "model_3d_step_plain": "at24mac602-sshm-t.step",
      "lbr": "at24mac602-sshm-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2061032",
      "digikey": "AT24MAC602-SSHM-TTR-ND",
      "mouser": "556-AT24MAC602SSHM-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T01:37:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AT24MAC602-SSHM-TTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "556-AT24MAC602SSHM-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Hard-wired device address input (to GND or VCC) that is internally pulled down if left floating, and Microchip recommends connecting it to a known state with a pull-up of 10 kΩ or less."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hard-wired device address input (to GND or VCC) that is internally pulled down if left floating, and Microchip recommends connecting it to a known state with a pull-up of 10 kΩ or less."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hard-wired device address input (to GND or VCC) that is internally pulled down if left floating, and Microchip recommends connecting it to a known state with a pull-up of 10 kΩ or less."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply, which should be connected to the system ground."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial data input/output that must be pulled high with an external pull-up resistor not exceeding 10 kΩ and may be wire-ORed with other open-drain devices on the bus."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that latches SDA input data on its rising edge and clocks SDA output data on its falling edge, and must be forced high when the bus is idle or pulled high with an external pull-up resistor."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write-protect input: connecting it to GND allows normal write operations, while connecting it to VCC inhibits all writes to the protected array (full array); it is internally pulled down if left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply pin; operations at invalid VCC voltages may produce spurious results and should not be attempted."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 21,
        "cost_usd": 0.068,
        "at": "2026-10-19T01:37:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589802722422919168",
        "pages": 45,
        "sha256": "07384d2ed03d89d2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at24mac602-sshm-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at24mac602-sshm-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d457d2cd672b5d5220113077c5ac448ecfcae4f91730d68929b3113c04280f6e",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}