component

at24lc08m

Public Made by Adom

by adom

HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentmemoryat24lc08m
Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs at24lc08m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers at24lc08m: viewers · Ray
at24lc08m-etched.fit.json at24lc08m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
at24lc08m-etched.glb at24lc08m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
at24lc08m-etched.step at24lc08m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
at24lc08m.glb Publish 0.1.0 · Ray
at24lc08m.kicad_mod Publish 0.1.0 · Ray
at24lc08m.kicad_sym Publish 0.1.0 · Ray
at24lc08m.lbr Publish 0.1.0 · Ray
at24lc08m.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json at24lc08m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md at24lc08m: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

AT24LC08M

HGSEMI · EEPROM · SOP-8

AT24LC08M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device/page address input. On the AT24LC08 the A0 pin is a no-connect (only A2 is used for hardware device addressing) and should be tied to GND.
2 A1 input Device/page address input. On the AT24LC08 the A1 pin is a no-connect (only A2 is used for hardware device addressing) and should be tied to GND.
3 A2 input Hard-wired device address input. On the AT24LC08 only A2 is used for device addressing, allowing up to two 8K devices to share one I2C bus. Compared against bit A2 of the I2C control byte (1010 A2 P1 P0 R/W).
4 GND power_in Ground reference (0 V) for the device.
5 SDA bidirectional I2C serial data line. Bi-directional, open-drain output that requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V per AC test conditions). Wire-ORable with other open-drain devices on the same bus.
6 SCL input I2C serial clock input. Data is clocked in on the positive edge and out on the negative edge. Supports up to 1 MHz at 5 V and 400 kHz at 1.8 V/2.5 V/2.7 V.
7 WP input Write Protect input. Tie to GND for normal read/write operations. When tied to VCC the entire 8K array is write-protected in hardware.
8 VCC power_in Power supply input, 1.7 V to 5.5 V. Typ. supply current 0.4 mA read / 2.0 mA write at 5 V, 100 kHz; standby current 2 µA max.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Memory
Pins 8

Ordering variants

  • AT24LC08MM/TR
  • AT24LC08MN
  • AT24LC08MMM/TR
  • AT24LC08MM5/TR

CAD (KiCad official)

  • Symbol: AT24LC08M
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: at24lc08m-etched.step / at24lc08m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24lc08m.step / at24lc08m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (None pp, sha256 9f239536c727cdd3, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF