component
AT24CS32-SSHM-T
Public Made by Adomby adom
Microchip Tech Pre-ordered MCUs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAT24CS32-SSHM-T
Microchip Tech · Pre-ordered MCUs · SOIC-8
AT24CS32-SSHM-T from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input, hard-wired to GND or VCC; internally pulled down to GND if left floating, and Microchip recommends a pull-up resistor of 10 kΩ or less when used. |
| 2 | A1 | input | Device address input, hard-wired to GND or VCC; internally pulled down to GND if left floating, and Microchip recommends a pull-up resistor of 10 kΩ or less when used. |
| 3 | A2 | input | Device address input, hard-wired to GND or VCC; internally pulled down to GND if left floating, and Microchip recommends a pull-up resistor of 10 kΩ or less when used. |
| 4 | GND | power_in | Ground reference for the power supply, which should be connected to the system ground. |
| 5 | SDA | bidirectional | Open-drain serial data input/output that must be pulled high through an external pull-up resistor not exceeding 10 kΩ. |
| 6 | SCL | input | Serial clock input; SDA data is latched on its rising edge and clocked out on its falling edge, and it must be held high when the bus is idle or pulled high externally. |
| 7 | WP | input | Write-protect input: connected to GND allows normal write operations, while connected to VCC inhibits all writes to the protected full array. |
| 8 | VCC | power_in | Device power supply pin supplying the source voltage (1.7 V to 5.5 V); operation at invalid VCC voltages may produce spurious results and should not be attempted. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] © 2020 Microchip Technology Inc. | 26 |
CAD (KiCad official)
- Symbol:
AT24CS32-SSHM-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
at24cs32-sshm-t-etched.step/at24cs32-sshm-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24cs32-sshm-t.step/at24cs32-sshm-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
9265a713d7932c05, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).