AT24C32E-STUM-T

{
  "schema_version": 1,
  "type": "component",
  "slug": "at24c32e-stum-t",
  "title": "AT24C32E-STUM-T",
  "brief": "Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "at24c32e-stum-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "AT24C32E-STUM-T",
    "manufacturer": "Microchip Tech",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/88098cbf623a13cf43194e97c16964cd.pdf",
    "parts": {
      "symbol": "at24c32e-stum-t.kicad_sym",
      "footprint": "at24c32e-stum-t.kicad_mod",
      "model_3d": "at24c32e-stum-t-hero.glb",
      "model_3d_plain": "at24c32e-stum-t.glb",
      "model_3d_step": "at24c32e-stum-t-etched.step",
      "model_3d_step_plain": "at24c32e-stum-t.step",
      "lbr": "at24c32e-stum-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C616256",
      "digikey": "AT24C32E-STUM-TTR-ND",
      "mouser": "556-AT24C32ESTUMT"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T00:51:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AT24C32E-STUM-TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "556-AT24C32ESTUMT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input; command and input data on SDA are latched on its rising edge, output data is clocked out on its falling edge, and it must be forced high when the bus is idle or pulled high with an external pull-up resistor."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply, which should be connected to the system ground."
      },
      {
        "number": "3",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial data input/output that must be pulled high with an external pull-up resistor not exceeding 10 kΩ and may be wire-ORed with other open-drain devices on the bus."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply pin supplying 1.7 V to 3.6 V; operation at invalid VCC voltages may produce spurious results and should not be attempted."
      },
      {
        "number": "5",
        "name": "WP",
        "type": "input",
        "description": "Write-protect input: connecting it to GND allows normal write operations, connecting it to VCC inhibits writes to the full array, and it is internally pulled down to GND if left floating (pull-up of 10 kΩ or less recommended)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOT23 package has no A0, A1 or A2 pins; Table 2-1 lists them as '—' for the 5-lead SOT23 and the; Source package drawing for the 5-lead SOT23 is labeled TSOT (C04-21344, Atmel legacy code TSZ) while"
        ],
        "pages_sent": 26,
        "cost_usd": 0.0041,
        "at": "2026-11-13T00:51:08"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/88098cbf623a13cf43194e97c16964cd.pdf",
        "pages": 47,
        "sha256": "f71991282524c3dd",
        "source_tier": "mfr"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "SOT",
        "height_mm": 1.1,
        "height_basis": "datasheet A, max",
        "standoff_mm": 0.05,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.36,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.95 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.172,
        "lead_thickness_basis": "default for pitch 0.95 mm, height 1.1 mm (no datasheet c read)"
      },
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at24c32e-stum-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "446de1f2c9066e18aa42ef5658442a50e1fcc4f605a7571b69e0305c3a9c03fd",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at24c32e-stum-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6a4bddbecdc6432132d984b35ae1eb48b7f4b7a3162409eb21c754fc954e6970",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "NMB",
      "source_page": 34,
      "D": {
        "nom_mm": 2.9,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 2.8,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.95,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "at24c32e-stum-t.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "SOT-23-5",
      "Category": "Memory",
      "Pins": "5"
    },
    "appearance": {
      "contacts": {
        "quote": "8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] © 2017 Microchip Technology Inc.",
        "page": 26,
        "doc": "ds.pdf",
        "plating": "tin"
      },
      "version": 1,
      "datasheet_sha256": "f71991282524c3dd8163f8a251df599475d0efbfdd65b6884910dcfdf8c54d44"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "f71991282524c3dd8163f8a251df599475d0efbfdd65b6884910dcfdf8c54d44",
      "rows": [
        {
          "name": "Operating Temperature (Case)",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Industrial Temperature Range",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "VCC Power Supply",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 3.6,
          "conditions": "Low Voltage Grade",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Temperature under bias",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "VCC (absolute maximum)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 4.1,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Voltage on any pin with respect to ground",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 4.1,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "DC output current",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "ESD protection",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "Printed as '> 4 kV'",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VCC1",
          "kind": "electrical",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Supply Current (Read at 400 kHz)",
          "symbol": "ICC1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.08,
          "max": 0.3,
          "conditions": "VCC = 1.8V(2), Read at 400 kHz",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Supply Current (Read at 1 MHz)",
          "symbol": "ICC1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.15,
          "max": 0.5,
          "conditions": "VCC = 3.6V, Read at 1 MHz",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Supply Current (Write at 1 MHz)",
          "symbol": "ICC2",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.2,
          "max": 1,
          "conditions": "VCC = 3.6V, Write at 1 MHz",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Standby Current",
          "symbol": "ISB",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.08,
          "max": 0.4,
          "conditions": "VCC = 1.8V(2), VIN = VCC or GND",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Standby Current",
          "symbol": "ISB",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.1,
          "max": 0.8,
          "conditions": "VCC = 3.6V; VIN = VCC or GND",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Input Leakage Current",
          "symbol": "ILI",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.1,
          "max": 3,
          "conditions": "VIN = VCC or GND",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Output Leakage Current",
          "symbol": "ILO",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.05,
          "max": 3,
          "conditions": "VOUT = VCC or GND",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Input Low Level",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": null,
          "conditions": "Note 2",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Output Low Level",
          "symbol": "VOL1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "VCC = 1.8V, IOL = 0.15 mA",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Output Low Level",
          "symbol": "VOL2",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "VCC = 3.0V, IOL = 2.1 mA",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Time required after VCC is stable before the device can accept commands",
          "symbol": "tPUP",
          "kind": "timing",
          "unit": "µs",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Power-on Reset Threshold Voltage",
          "symbol": "VPOR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.5,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Minimum time at VCC = 0V between power cycles",
          "symbol": "tPOFF",
          "kind": "timing",
          "unit": "ms",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Input/Output Capacitance (SDA)",
          "symbol": "CI/O",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "VI/O = 0V",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Input Capacitance (A0, A1, A2 and SCL)",
          "symbol": "CIN",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "VIN = 0V",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Write Endurance",
          "symbol": "",
          "kind": "electrical",
          "unit": "Write Cycles",
          "min": 1000000,
          "typ": null,
          "max": null,
          "conditions": "TA = 25°C, VCC (min.) < VCC < VCC (max.), Byte or Page Write mode",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Data Retention",
          "symbol": "",
          "kind": "electrical",
          "unit": "Years",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "TA = 55°C",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Clock Frequency, SCL",
          "symbol": "fSCL",
          "kind": "timing",
          "unit": "kHz",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Frequency, SCL",
          "symbol": "fSCL",
          "kind": "timing",
          "unit": "kHz",
          "min": null,
          "typ": null,
          "max": 400,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Pulse Width Low",
          "symbol": "tLOW",
          "kind": "timing",
          "unit": "ns",
          "min": 4700,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Pulse Width Low",
          "symbol": "tLOW",
          "kind": "timing",
          "unit": "ns",
          "min": 1300,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Pulse Width High",
          "symbol": "tHIGH",
          "kind": "timing",
          "unit": "ns",
          "min": 4000,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Pulse Width High",
          "symbol": "tHIGH",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Input Filter Spike Suppression (SCL, SDA)",
          "symbol": "tI",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Low to Data Out Valid",
          "symbol": "tAA",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 4500,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Clock Low to Data Out Valid",
          "symbol": "tAA",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 900,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Bus Free Time between Stop and Start",
          "symbol": "tBUF",
          "kind": "timing",
          "unit": "ns",
          "min": 4700,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Bus Free Time between Stop and Start",
          "symbol": "tBUF",
          "kind": "timing",
          "unit": "ns",
          "min": 1300,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Start Hold Time",
          "symbol": "tHD.STA",
          "kind": "timing",
          "unit": "ns",
          "min": 4000,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Start Hold Time",
          "symbol": "tHD.STA",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Start Set-up Time",
          "symbol": "tSU.STA",
          "kind": "timing",
          "unit": "ns",
          "min": 4700,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Start Set-up Time",
          "symbol": "tSU.STA",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data In Hold Time",
          "symbol": "tHD.DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data In Set-up Time",
          "symbol": "tSU.DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 200,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data In Set-up Time",
          "symbol": "tSU.DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Inputs Rise Time",
          "symbol": "tR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Inputs Rise Time",
          "symbol": "tR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Inputs Fall Time",
          "symbol": "tF",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Stop Condition Set-up Time",
          "symbol": "tSU.STO",
          "kind": "timing",
          "unit": "ns",
          "min": 4700,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Stop Condition Set-up Time",
          "symbol": "tSU.STO",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Write Protect Setup Time",
          "symbol": "tSU.WP",
          "kind": "timing",
          "unit": "ns",
          "min": 4000,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Write Protect Setup Time",
          "symbol": "tSU.WP",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Write Protect Hold Time",
          "symbol": "tHD.WP",
          "kind": "timing",
          "unit": "ns",
          "min": 4000,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Write Protect Hold Time",
          "symbol": "tHD.WP",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data Out Hold Time",
          "symbol": "tDH",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data Out Hold Time",
          "symbol": "tDH",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": null,
          "max": null,
          "conditions": "Fast Mode, VCC = 1.7V to 3.6V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Write Cycle Time",
          "symbol": "tWR",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "Standard Mode, VCC = 1.7V to 3.6V",
          "source_page": 11,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "at24c32e-stum-t"
  ],
  "discovery_pitch": "AT24C32E-STUM-T (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at24c32e-stum-t.kicad_sym",
    "at24c32e-stum-t.kicad_mod",
    "at24c32e-stum-t.glb",
    "at24c32e-stum-t.step",
    "at24c32e-stum-t.lbr",
    "docs/hero.png",
    "docs/at24c32e-stum-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at24c32e-stum-t-hero.glb",
    "at24c32e-stum-t-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}