component
AT24C32E-SSHM-B
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 9d ago |
| viewers | 9d ago |
| at24c32e-sshm-b-etched.glb | 9d ago |
| at24c32e-sshm-b-etched.step | 9d ago |
| at24c32e-sshm-b-hero.glb | 9d ago |
| at24c32e-sshm-b-hero.overlay.json | 9d ago |
| at24c32e-sshm-b.glb | 9d ago |
| at24c32e-sshm-b.kicad_mod | 9d ago |
| at24c32e-sshm-b.kicad_sym | 9d ago |
| at24c32e-sshm-b.lbr | 9d ago |
| at24c32e-sshm-b.step | 9d ago |
| package.json | 9d ago |
| page.json | 9d ago |
| README.md | 9d ago |
AT24C32E-SSHM-B
Microchip Tech · EEPROM · SOIC-8
AT24C32E-SSHM-B from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input hard-wired to GND or VCC for multi-device addressing (up to eight devices per bus); internally pulled down to GND if left unconnected. |
| 2 | A1 | input | Device address input hard-wired to GND or VCC for multi-device addressing (up to eight devices per bus); internally pulled down to GND if left unconnected. |
| 3 | A2 | input | Device address input hard-wired to GND or VCC for multi-device addressing (up to eight devices per bus); internally pulled down to GND if left unconnected. |
| 4 | GND | power_in | Ground reference for the power supply, to be connected to system ground. |
| 5 | SDA | bidirectional | Open-drain bidirectional serial data pin requiring an external pull-up resistor not exceeding 10 kΩ, may be wire-ORed with other open-drain bus pins. |
| 6 | SCL | input | Serial clock input that controls data flow; input data is latched on the rising edge and output data is clocked out on the falling edge, and it must be forced high or pulled high when the bus is idle. |
| 7 | WP | input | Write-protect input: at GND allows normal writes, at VCC inhibits all writes to the full array; internally pulled down to GND if left floating. |
| 8 | VCC | power_in | Device power supply pin, operating range 1.7V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC1 | 1.7 | 3.6 | V | 9 | ||
| Supply Current (read) | ICC1 | 0.08 | 0.3 | mA | VCC = 1.8V, Read at 400 kHz | 9 | |
| Supply Current (read) | ICC1 | 0.15 | 0.5 | mA | VCC = 3.6V, Read at 1 MHz | 9 | |
| Supply Current (write) | ICC2 | 0.2 | 1 | mA | VCC = 3.6V, Write at 1 MHz | 9 | |
| Standby Current | ISB | 0.08 | 0.4 | μA | VCC = 1.8V, VIN = VCC or GND | 9 | |
| Standby Current | ISB | 0.1 | 0.8 | μA | VCC = 3.6V; VIN = VCC or GND | 9 | |
| Input Leakage Current | ILI | 0.1 | 3 | μA | VIN = VCC or GND | 9 | |
| Output Leakage Current | ILO | 0.05 | 3 | μA | VOUT = VCC or GND | 9 | |
| Input Low Level | VIL | -0.6 | 0.3 | V | Note 2; max is VCC x 0.3 | 9 | |
| Input High Level | VIH | 0.7 | 0.5 | V | Note 2; min is VCC x 0.7, max is VCC + 0.5 | 9 | |
| Output Low Level | VOL1 | 0.2 | V | VCC = 1.8V, IOL = 0.15 mA | 9 | ||
| Output Low Level | VOL2 | 0.4 | V | VCC = 3.0V, IOL = 2.1 mA | 10 | ||
| Clock Frequency, SCL (Standard) | fSCL | 100 | kHz | VCC = 1.7V to 3.6V | 10 | ||
| Clock Frequency, SCL (Fast) | fSCL | 400 | kHz | VCC = 1.7V to 3.6V | 10 | ||
| Clock Frequency, SCL (FM+) | fSCL | 1000 | kHz | VCC = 2.5V to 3.6V | 10 | ||
| Write Cycle Time | tWR | 5 | ms | 10 | |||
| Power-up time before commands | tPUP | 100 | µs | 11 | |||
| Power-on Reset Threshold Voltage | VPOR | 1.5 | V | 11 | |||
| Min time at VCC = 0V between power cycles | tPOFF | 1 | ms | 11 | |||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | VI/O = 0V | 11 | ||
| Input Capacitance (A0, A1, A2 and SCL) | CIN | 6 | pF | VIN = 0V | 12 | ||
| Write Endurance | 1e+06 | Write Cycles | TA = 25°C, VCC (min.) < VCC < VCC (max.), Byte or Page Write mode | 12 | |||
| Data Retention | 100 | Years | TA = 55°C | 12 | |||
| Supply Voltage (operating) | VCC | 1.7 | 3.6 | V | Low-Voltage Grade | 9 | |
| Operating Temperature (Case) | -40 | 85 | °C | Industrial Temperature Range | 9 | ||
| Temperature under bias | -55 | 125 | °C | 9 | |||
| Storage temperature | -65 | 150 | °C | 9 | |||
| VCC | VCC | 4.1 | V | 9 | |||
| Voltage on any pin with respect to ground | -0.5 | 4.1 | V | 9 | |||
| DC output current | 5 | mA | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] © 2020 Microchip Technology Inc. | 25 |
CAD (KiCad official)
- Symbol:
AT24C32E-SSHM-B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
at24c32e-sshm-b-etched.step/at24c32e-sshm-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c32e-sshm-b.step/at24c32e-sshm-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (45 pp, sha256
53e799ce2c91c1eb, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).