component

AT24C16

Public Made by Adom

by adom

IDCHIP EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemoryat24c16
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs at24c16: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
at24c16-etched.fit.json at24c16: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
at24c16-etched.glb at24c16: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
at24c16-etched.step at24c16: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
at24c16.glb Publish 0.1.0 · Ray
at24c16.kicad_mod Publish 0.1.0 · Ray
at24c16.kicad_sym Publish 0.1.0 · Ray
at24c16.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
at24c16.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json at24c16: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md at24c16: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

AT24C16

IDCHIP · EEPROM · SOP-8

AT24C16 from IDCHIP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect. The AT24C16 consumes all three device-address bits (A0/A1/A2) internally for page selection within the 2Kx8 array, so this pad is left floating on the SOP-8 package.
2 NC unconnected No connect. See pin 1 note; the device-address input is not used on the 16Kbit density.
3 NC unconnected No connect. See pin 1 note; the device-address input is not used on the 16Kbit density.
4 GND power_in Ground reference (0V) for the device (电源负).
5 SDA bidirectional I2C serial data line (串行数据端). Open-drain bidirectional input/output for address, data, and acknowledge bits; requires an external pull-up resistor (typ. 10kΩ) to VCC.
6 SCL input I2C serial clock input (串行时钟端). Clocks data into/out of the device on rising/falling edges; up to 1MHz at VCC=5V, 400kHz at 1.8V/2.5V/2.7V. Requires an external pull-up resistor (typ. 10kΩ) to VCC.
7 WP input Write-protect input (写保护端). When tied high, hardware write protection blocks write operations to the array; when tied low (or left low via pull-down), normal read/write operation is permitted.
8 VCC power_in Positive supply (电源正). Operating range 1.8V to 5.5V (absolute max 5.5V). Recommend a 1μF decoupling capacitor to GND as shown in the typical application circuit.

Key specifications

Parameter Value
Manufacturer IDCHIP
Package SOP-8
Category Memory
Pins 8

Ordering variants

  • AT24C16

CAD (KiCad official)

  • Symbol: AT24C16
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: at24c16-etched.step / at24c16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24c16.step / at24c16.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
at24c16.step 122 KB You want the bare part, or you mark your own boards.
at24c16-etched.step 1.4 MB You want the part with AT24C16 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 371 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: IDCHIP datasheet (12 pp, sha256 74187a0319348f68, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF