component
AT24C08CM
Public Made by Adomby adom
HGSEMI EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "at24c08cm",+ "title": "AT24C08CM",+ "brief": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "at24c08cm" ],+ "component": {+ "mpn": "AT24C08CM",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e87f7de5927cd9cae961b231e34459d7.pdf",+ "parts": {+ "symbol": "at24c08cm.kicad_sym",+ "footprint": "at24c08cm.kicad_mod",+ "model_3d": "at24c08cm.glb",+ "model_3d_step": "at24c08cm.step",+ "lbr": "at24c08cm.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground; do not use as a signal via."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground; do not use as a signal via."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Device Address Input. Selects one of two device address values so up to two AT24C08C devices can share a single 2-wire bus (E2 must match address bit E2 in the device address byte). Tie directly to VCC or GND; if left floating, an internal pull-down forces the pin to GND."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the power supply. Connect to the system ground."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial Data. Open-drain bidirectional data line used to serially transfer address and data between the master and the EEPROM; requires an external pull-up resistor to VCC. Schmitt-trigger input with integrated spike-suppression filter."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial Clock. Clock input from the master; data on SDA is latched into the device on the rising edge and clocked out on the falling edge. Supports up to 400 kHz standard and 1 MHz high-speed operation."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to VCC to hardware write-protect the entire memory array (device becomes read-only); tie to GND to enable writes. Left floating, an internal pull-down forces the pin to GND."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Device power supply, 1.7 V to 5.5 V. Bypass locally with a 0.1 uF ceramic capacitor to GND. Operation outside the specified range may produce spurious results."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/e87f7de5927cd9cae961b231e34459d7.pdf",+ "pages": 25,+ "sha256": "e1c182cb482476f4",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HGSEMI",+ "Package": "SOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "at24c08cm"+ ],+ "discovery_pitch": "AT24C08CM (HGSEMI) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/at24c08cm-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }