component
AT24C04D-STUM-T
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAT24C04D-STUM-T
Microchip Tech · EEPROM · SOT-23-5
AT24C04D-STUM-T from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial Clock: open-drain I2C clock input for timing and data flow control; latches command and input data on rising edge, clocks output data on falling edge. |
| 2 | GND | power_in | Ground: the ground reference for the power supply. |
| 3 | SDA | bidirectional | Serial Data: open-drain bidirectional I2C data input/output requiring external pull-up resistor not exceeding 10kΩ; must be wire-ORed capable for multi-master operation. |
| 4 | WP | input | Write Protect: control input for hardware data protection; connect to GND for normal write operations or to VCC to inhibit all write operations to the memory array. |
| 5 | VCC | power_in | Device Power Supply: positive supply voltage input; operating range 1.7V to 3.6V; requires monotonic rise from GND with slew rate not exceeding 0.1V/μs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
AT24C04D-STUM-T - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
at24c04d-stum-t-etched.step/at24c04d-stum-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c04d-stum-t.step/at24c04d-stum-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (27 pp, sha256
f4069c4810edcb48, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).