component

AT24C04CN

Public Made by Adom

by adom

HGSEMI EEPROM, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemoryat24c04cnfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
at24c04cn / README.md
History Download
Ray Publish 0.1.0 561c3be 1d ago

AT24C04CN

HGSEMI · EEPROM · DIP-8

AT24C04CN from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect; the DIP-8 pin configuration shows pin 1 as NC.
2 E1 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
3 E2 input Device address input that can be tied to VCC or GND in any combination, and is internally pulled down to GND if left floating.
4 GND power_in Ground reference for the power supply, to be connected to system ground.
5 SDA bidirectional Serial data, an open-drain bidirectional input/output pin used to transfer data to and from the device.
6 SCL input Serial clock input that controls data flow; input data is latched on the rising edge of SCL and output data is clocked out on the falling edge.
7 WP input Write protection input; tied to VCC it makes the whole memory read-only, tied to GND it enables writes, and it is internally pulled down to GND if left floating.
8 VCC power_in Device power supply, 1.7V to 5.5V; operation at invalid VCC voltages may produce spurious results.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 1.7 5.5 V 18
Supply Current (Read) ICC1 0.1 mA VCC= 1.7V, Read at 1MHz 18
Supply Current (Read) ICC1 0.4 mA VCC= 5.5V, Read at 400 kHz 18
Supply Current (Read) ICC1 0.5 mA VCC= 5.5V, Read at 1MHz 18
Supply Current (Write) ICC2 1 mA VCC= 5.5V, Write at 400 kHz 18
Standby Current ISB 1 μA VCC = 1.7V, VIN = VCC or GND 18
Input Leakage Current ILI 1 μA VIN = VCC or GND 18
Output Leakage Current ILO 1 μA VOUT = VCC or GND 18
Input Low-Level Voltage (SDA, SCL) VIL -0.5 V 18
Low-Level Output Voltage VOL1 0.4 V VCC> 2V, IOL= 3mA 18
Low-Level Output Voltage VOL2 0.2 V VCC≤2V, IOL= 2mA 18
Ambient temperature (operating range) TA -40 105 °C 18
Ambient temperature with power applied TA -40 105 °C 18
Storage temperature TSTG -65 150 °C 18
Supply voltage (absolute maximum) VCC -0.5 6 V 18
Voltage on input pins VIN -0.5 6 V 18
Electrostatic pulse (human body model) VESD 6000 V Human body model 18
Lead Temperature (Soldering) TL 260 °C Soldering, 10 seconds 18
Power-On Reset Time tPOR 10 ms 6
Power-On Reset Voltage VPOR 1.5 V 6
Brown-out Reset Voltage VBOR 0.8 V 6
Time from Power-On to First Command tINIT 10 ms 6
Warm Power Cycle Off Time tPOFF 1 ms 6
Input/output Capacitance (SDA) CI/O 8 pF VI/O = 0V 20
Input Capacitance (other pins) CIN 6 pF VIN = 0V 20
Clock Frequency, SCL fSCL 400 kHz Fast, VCC = 1.7V to 5.5V 19
Clock Frequency, SCL fSCL 1000 kHz High Speed, VCC = 1.7V to 5.5V 19
Clock Pulse Width Low tLOW 1300 ns Fast, VCC = 1.7V to 5.5V 19
Clock Pulse Width Low tLOW 600 ns High Speed, VCC = 1.7V to 5.5V 19
Clock Pulse Width High tHIGH 600 ns Fast, VCC = 1.7V to 5.5V 19
Clock Pulse Width High tHIGH 260 ns High Speed, VCC = 1.7V to 5.5V 19
SDA Rise Time tR 300 ns Fast, VCC = 1.7V to 5.5V 19
SDA(Out) Fall Time tF 300 ns Fast, VCC = 1.7V to 5.5V 19
SDA(Out) Fall Time tF 100 ns High Speed, VCC = 1.7V to 5.5V 19
Start Hold Time tHD.STA 600 ns Fast, VCC = 1.7V to 5.5V 19
Start Hold Time tHD.STA 250 ns High Speed, VCC = 1.7V to 5.5V 19
Start Setup Time tSU.STA 600 ns Fast, VCC = 1.7V to 5.5V 19
Start Setup Time tSU.STA 250 ns High Speed, VCC = 1.7V to 5.5V 19
Stop Setup Time tSU.STO 600 ns Fast, VCC = 1.7V to 5.5V 19
Stop Setup Time tSU.STO 250 ns High Speed, VCC = 1.7V to 5.5V 19
Bus Free Time between Stop and Next Start tBUF 1300 ns Fast, VCC = 1.7V to 5.5V 19
Bus Free Time between Stop and Next Start tBUF 500 ns High Speed, VCC = 1.7V to 5.5V 19
Data In Hold Time tHD.DI 0 ns Fast, VCC = 1.7V to 5.5V 19
Data In Setup Time tSU.DAT 100 ns Fast, VCC = 1.7V to 5.5V 19
Data In Setup Time tSU.DAT 50 ns High Speed, VCC = 1.7V to 5.5V 19
Data Out Hold Time tHD.DAT 50 ns Fast, VCC = 1.7V to 5.5V 19
SCL Low to Data Out Valid tAA 100 900 ns Fast, VCC = 1.7V to 5.5V 19
SCL Low to Data Out Valid tAA 50 500 ns High Speed, VCC = 1.7V to 5.5V 19
WP Pin Setup Time tSU.WP 1200 ns Fast, VCC = 1.7V to 5.5V 19
WP Pin Setup Time tSU.WP 600 ns High Speed, VCC = 1.7V to 5.5V 19
WP Pin Hold Time tHD.WP 1200 ns Fast, VCC = 1.7V to 5.5V 19
WP Pin Hold Time tHD.WP 600 ns High Speed, VCC = 1.7V to 5.5V 19
Write Cycle Time tWR 5 ms Fast, VCC = 1.7V to 5.5V 19
Noise Suppression Time tI 50 ns Fast, VCC = 1.7V to 5.5V 19

CAD (KiCad official)

  • Symbol: AT24C04CN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: at24c04cn-etched.step / at24c04cn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24c04cn.step / at24c04cn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (26 pp, sha256 38c548dbc7c3897e, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF