at24c04cdbvrg

{
  "slug": "at24c04cdbvrg",
  "version": "0.1.0",
  "type": "component",
  "description": "HANSCHIP semiconductor EEPROM, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "at24c04cdbvrg"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at24c04cdbvrg.kicad_sym",
    "at24c04cdbvrg.kicad_mod",
    "at24c04cdbvrg.glb",
    "at24c04cdbvrg.step",
    "at24c04cdbvrg.lbr",
    "docs/hero.png",
    "docs/at24c04cdbvrg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at24c04cdbvrg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "AT24C04CDBVRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "EEPROM",
    "parts": {
      "symbol": "at24c04cdbvrg.kicad_sym",
      "footprint": "at24c04cdbvrg.kicad_mod",
      "model_3d": "at24c04cdbvrg-etched.glb",
      "model_3d_plain": "at24c04cdbvrg.glb",
      "model_3d_step": "at24c04cdbvrg-etched.step",
      "model_3d_step_plain": "at24c04cdbvrg.step",
      "lbr": "at24c04cdbvrg.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "SCL",
        "type": "input",
        "description": "Serial Clock input for the 2-wire I2C interface. Provides the clock to the device and controls data flow; SDA input is latched on the rising edge of SCL and output data is clocked out on the falling edge. Requires an external pull-up resistor to VCC. Schmitt-trigger and spike-filtered input."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply. Must be connected to the system ground."
      },
      {
        "number": "3",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial Data line for the 2-wire I2C interface. Open-drain bidirectional pin used to serially transfer command, address and data bytes; requires an external pull-up resistor to VCC. Schmitt-trigger and spike-filtered input."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply, 1.7 V to 5.5 V (absolute max +6.0 V). A local decoupling capacitor to GND is recommended. Operations at invalid VCC levels may produce spurious results."
      },
      {
        "number": "5",
        "name": "WP",
        "type": "input",
        "description": "Hardware Write Protection input. When tied to VCC, the entire memory array (and Identification Page) becomes write-protected (read-only); when tied to GND, write operations are enabled. Floating input is internally pulled down to GND. When driven high, device/word-address bytes are still acknowledged but data bytes are not."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C19723709",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:53:09Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "at24c04cdbvrg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at24c04cdbvrg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "342e666c149cd14171493233e2d77d0256b98447421856f6cf49782da92fa416",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}