component
AT24C04C-SSHM-T-TUDI
Public Made by Adomby adom
Tudi EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 4d ago |
| at24c04c-sshm-t-tudi-etched.glb | 4d ago |
| at24c04c-sshm-t-tudi-etched.step | 4d ago |
| at24c04c-sshm-t-tudi-hero.glb | 4d ago |
| at24c04c-sshm-t-tudi-hero.overlay.json | 4d ago |
| at24c04c-sshm-t-tudi.glb | 4d ago |
| at24c04c-sshm-t-tudi.kicad_mod | 4d ago |
| at24c04c-sshm-t-tudi.kicad_sym | 4d ago |
| at24c04c-sshm-t-tudi.lbr | 4d ago |
| at24c04c-sshm-t-tudi.step | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
AT24C04C-SSHM-T-TUDI
Tudi · EEPROM · SOP-8
AT24C04C-SSHM-T-TUDI from Tudi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input listed for the 24C04 pin set, but on the 4K device page 6 states the A0 pin is no connect, so it should not be driven or relied on for addressing. |
| 2 | A1 | input | Hard-wired device address input that must compare to its corresponding device address bit; on the 4K device it is used as a device address bit. |
| 3 | A2 | input | Hard-wired device address input that must compare to its corresponding device address bit on the 4K device. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Bi-directional serial data pin with open-drain drive that may be wire-ORed with other open-drain or open-collector devices, and it is normally pulled high by an external device. |
| 6 | SCL | input | Serial clock input that positive-edge clocks data into the device and negative-edge clocks data out of it. |
| 7 | WP | input | Write Protect input: connecting it to GND allows normal read/write operations, while connecting it to VCC enables write protection of the full array. |
| 8 | VCC | power_in | Power supply; the device operates from VCC = 1.7 V to 5.5 V, with absolute maximum DC supply voltage of -0.3 V to +6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tudi |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | -0.3 | 6.5 | V | 10 | |||
| Operating Ambient Temperature | -40 | 85 | ℃ | 10 | |||
| Storage Temperature | -65 | 150 | ℃ | 10 | |||
| Electrostatic pulse (Human Body model) | 8000 | V | Human Body model | 10 | |||
| Supply voltage VCC (recommended operating range) | VCC | 1.7 | 5.5 | V | Applicable over recommended operating range TA = -40℃ to +85℃ | 10 | |
| Ambient temperature TA (recommended operating range) | TA | -40 | 85 | ℃ | Applicable over recommended operating range VCC = +1.7V to +5.5V | 10 | |
| Output Low Level VCC=5.0V | VOL2 | 0.4 | V | IOL=3.0mA | 10 | ||
| Output Low Level VCC=1.7V | VOL1 | 0.2 | V | VCC=1.7V; IOL=0.15mA | 10 | ||
| Input High Level | VIH1 | 0.7 | 0.3 | V | VCC=1.7V to 5.5V; min printed as ×0.7 (VCC multiple), max printed as +0.3 | 10 | |
| Input Low Level | VIL1 | -0.3 | 0.3 | V | VCC=1.7V to 5.5V; max printed as ×0.3 (VCC multiple) | 10 | |
| Output Leakage Current | ILO | 0.05 | 1 | μA | VOUT=VCC or V | 10 | |
| Input Leakage Current | ILI | 0.1 | 1 | μA | VIN=VCC or V | 10 | |
| Supply Current standby | ISB1 | 0.03 | 0.5 | μA | VCC=5.0V | 10 | |
| Supply Current WRITE at 400KHZ | ICC2 | 0.28 | 0.5 | mA | VCC=5.0V; WRITE at 400KHZ | 10 | |
| Supply Current READ at 400KHZ | ICC1 | 0.14 | 0.3 | mA | VCC=5.0V; READ at 400KHZ | 10 | |
| Supply Voltage (for ICC2 write range) | VCC2 | 2.5 | 5.5 | V | 10 | ||
| Supply Voltage (for ICC1 read range) | VCC1 | 1.7 | 5.5 | V | 10 | ||
| Input Capacitance (A0,A1,A2,SCL) | CIN | 6 | pF | TA = 25℃, f = 1.0 MHz, VCC = +1.7V; VIN=0V | 10 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | TA = 25℃, f = 1.0 MHz, VCC = +1.7V; VI/O=0V | 10 | ||
| Write Cycle Time | tWR | 1.9 | 3 | ms | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | |
| Data Out Hold Time | tDH | 50 | ns | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Stop Setup Time | tSU:STO | 0.25 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Input Fall Time | tF | 0.3 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Input Rise Time | tR | 0.3 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Data in Setup Time | tSU:DAT | 100 | ns | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Data In Hold Time | tHD:DAT | 0 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Start Setup Time | SU:DAT | 0.25 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Start Hold Time | tHD:STA | 0.25 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Time the bus must be free before a new transmission can start | tBUF | 0.5 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Clock Low to Data Out Valid | tAA | 0.1 | 0.55 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | |
| Noise Suppression Time | I | 50 | ns | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Clock Pulse Width High | tHIGH | 0.4 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Clock Pulse Width Low | tLOW | 0.6 | μs | TA=-40℃ to +85℃; VCC=1.7V to 5.5V; CL=1 TTL Gate and 100 pF | 11 | ||
| Clock Frequency SCL (1.7V≤VCC<2.5V) | fSCL | 400 | KHZ | 1.7V≤VCC<2.5V; TA=-40℃ to +85℃; CL=1 TTL Gate and 100 pF | 11 | ||
| Clock Frequency SCL (2.5V≤VCC<5.5V) | fSCL | 1000 | KHZ | 2.5V≤VCC<5.5V; TA=-40℃ to +85℃; CL=1 TTL Gate and 100 pF | 11 |
CAD (KiCad official)
- Symbol:
AT24C04C-SSHM-T-TUDI - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
at24c04c-sshm-t-tudi-etched.step/at24c04c-sshm-t-tudi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c04c-sshm-t-tudi.step/at24c04c-sshm-t-tudi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tudi datasheet (18 pp, sha256
4c16636c4866f117, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).