component

AT24C02D-XHM-T-TUDI

Public Made by Adom

by adom

Tudi EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemoryat24c02d-xhm-t-tudifactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 3d ago
viewers at24c02d-xhm-t-tudi: viewers · Ray 3d ago
at24c02d-xhm-t-tudi-etched.glb Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi-etched.step at24c02d-xhm-t-tudi: factory component page (tier=lcsc) · Ray 3d ago
at24c02d-xhm-t-tudi-hero.glb at24c02d-xhm-t-tudi: hero GLB from the etched model (keeps the MPN mark) · Ray 3d ago
at24c02d-xhm-t-tudi-hero.overlay.json Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi.glb Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi.kicad_mod Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi.kicad_sym Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi.lbr Publish 0.1.0 · Ray 3d ago
at24c02d-xhm-t-tudi.step Publish 0.1.0 · Ray 3d ago
package.json Publish 0.1.0 · Ray 3d ago
page.json Set visibility: public · Ray 3d ago
README.md Publish 0.1.0 · Ray 3d ago

AT24C02D-XHM-T-TUDI

Tudi · EEPROM · TSSOP-8

AT24C02D-XHM-T-TUDI from Tudi, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Address input that is hard-wired to set the device address bit A0, allowing up to eight devices on one bus, and biased to logic low if left floating.
2 A1 input Address input that is hard-wired to set the device address bit A1, allowing up to eight devices on one bus, and biased to logic low if left floating.
3 A2 input Address input that is hard-wired to set the device address bit A2, allowing up to eight devices on one bus, and biased to logic low if left floating.
4 GND power_in Ground.
5 SDA bidirectional Bidirectional serial data pin that is open-drain driven and may be wire-ORed with other open-drain or open-collector devices, so it needs an external pull-up.
6 SCL input Serial clock input that clocks data into the EEPROM on the positive edge and out of it on the negative edge.
7 WP input Write protect input that allows normal read/write operation when connected to GND and write-protects the full array when connected to VCC.
8 VCC power_in Power supply, 1.7V to 5.5V at 400kHz and 2.5V to 5.5V at 1MHz.

Key specifications

Parameter Value
Manufacturer Tudi
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Supply Voltage -0.3 6.5 V 10
Storage Temperature -65 150 ℃ 10
Supply Voltage VCC1 1.7 5.5 V @400kHz 10
Supply Voltage VCC2 2.5 5.5 V @1MHz 10
Supply Current IR 0.14 0.3 mA VCC=5.0V READ @ 400kHz 10
Supply Current IW 0.28 0.5 mA VCC=5.0V WRITE @ 400kHz 10
Supply Current ISB 0.03 0.5 μA VCC=5.0V VIN=VCC or VSS 10
Input Leakage Current ILI 0.1 1 μA VIN=VCC or VSS 10
Output Leakage Current ILO 0.05 1 μA VOUT=VCC or VSS 10
Input Low Level VIL -0.3 V VCC=1.7V to 5.5V 10
Output Low Level VOL1 0.2 V VCC=1.7V IOL=0.15mA 10
Output Low Level VOL2 0.4 V VCC=5.0V IOL=3.0mA 10
Input/Output Capacitance (SDA) CI/O 8 pF VIO=0V 10
Input Capacitance (A0,A1,A2,SCL) CIN 6 pF VIN=0V 10
Clock Frequency, SCL fSCL 1000 kHz 11
Clock Pulse Width Low tLOW 0.5 μs 11
Clock Pulse Width High tHIGH 0.26 μs 11
Noise Suppression Time tI 50 ns 11
Clock Low to Data Out Valid tAA 0.45 μs 11
Bus free time before new transmission tBUF 0.5 μs 11
Start Hold Time tHD:STA 0.26 μs 11
Start Setup Time tSU:STA 0.26 μs 11
Data In Hold Time tHD:DAT 0 μs 11
Data In Setup Time tSU:DAT 50 ns 11
Stop Setup Time tSU:STO 0.26 μs 11
Data Out Hold Time tDH 50 ns 11
Write Cycle Time tWR 3 ms 11
Operating Temperature TA -40 85 ℃ 10

CAD (KiCad official)

  • Symbol: AT24C02D-XHM-T-TUDI
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: at24c02d-xhm-t-tudi-etched.step / at24c02d-xhm-t-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24c02d-xhm-t-tudi.step / at24c02d-xhm-t-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (18 pp, sha256 ad7501132ec29638, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF